Dec 2012 iMac using bluetooth keyboard will not exit Target Display Mode

Hi! I have a new 27" iMac that I would like to use as a second monitor for my work laptop a late 2011 15" MBP. iMac is on 10.8.3 and Mac Book Pro on 10.7.5. Connected via a thunderbolt cable.
I can toggle on Target Display Mode using the command-F2 keys on my bluetooth keyboard connected to the iMac. If I understand directions correctly, I should use the same keys and keyboard to toggle off – but it doesn't work. I'm able to work around by putting MBP to sleep, which exits the iMac out of TDM.
I can use the work around, but...
1) it's annoying.
2) If I can't use the bluetooth keyboard to toggle, it would be nice to connect it to the MBP for use while in TMD. Unfortunately, the bluetooth keyboard is undiscoverable, presumably because it's still connected to the iMac.
I wonder:
Am I doing something wrong trying to toggle out of TMD using bluetooth keyboard?
or
Is there a way to enter iMac into TMD without using keyboard command? Maybe System Preferences?
Thanks for your help in advance!

Here's the solution: I had the same problem using my 27" iMac as an external display. The issue is, when you go to Target Display mode, your target computer, the iMac 27" locks the screen with your password.
To switch off TDM, type your password in on the iMac keyboard and press the enter key.
Now press COMMAND - F2 and the displays with switch back to two separate displays. :-)
I had to think like a computer to figure that out but it makes sense.
I also have the disappearing mouse pointer and have not figured that one out. I did all the software updates and I did not have this problem until I upgraded to Lion. It is definitely a software issue. I might have to open a case with Apple support. Not happy.
Derrick

Similar Messages

Bluetooth keyboard will not connect after upgrading to 10.9.2

I upgraded mavericks to 10.9.2 bluetooth keyboard will not connect my blutooth mouse will connect my trackpad will connect but not my keyboard. Keeps saying it cannot pair . I reset the VRAM and keyboard still will not connect

Tried all of the below and nothing is working.
Apple Support: Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048

Bluetooth Keyboard will not install since I updated to OS X 10.9.2

Since I updated to OS X 10.9.2 my Apple Bluetooth Keyboard will no longer pair with my Mac Book Pro.

Try resetting the SMC.
Barry

Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

My Apple bluetooth keyboard will not connect to my Macbook (it was connected before)

Hi
My Bluetooth keyboard (model A1314) was connected to my Macbook. I was away on a trip and now it will not connect. A message comes up saying "error connecting to device". I have tried everything that I can think of - replaced the batteries, removed the keyboard from the Bluetooth list.
I would be grateful for some advice please!
Thanks!

Try resetting the SMC.
Barry

I want to use Back to my Mac, but my iMac using wireless LAN will not wake from sleep

I've read a ton of posts, and it seems that others have similar problems.
Here are some details: I have a 2 year old iMac now running updated install of Yosemite. I have a brand new MBP running clean install of Yosemite.
I have a 2 year old AirPort Extreme connecting my home wireless LAN. How can I get my MBP to connect to my iMac using Back to my Mac once the iMac has gone to sleep. Back to my Mac works if all computers are active.
The appropriate energy saver selections have been made. Leaving the iMac awake is not an option.
it just doesn't seem to work. No wake on wireless LAN?
Help please

Someone else may come along and have an idea, but as far as I know the iMac shuts off wifi when asleep so it can't be used to wake up the Mac. It has to be a wired connection.
Leaving the iMac awake with the display off really doesn't use much energy so it might be worth considering.
~Lyssa

My Bluetooth keyboard will not pair with os7 after working perfectly before the update

My iPad mini won't pair with my Bluetooth keyboard anymore after updating to os7

Forget the device again, then turn off bluetooth on your iPad, then turn both the iPad and the keyboard completely off. Wait 30 seconds to one minute. Now turn on your iPad and turn on bluetooth. Turn on your keyboard and pair them up again.

Updated to iOS 7 with kensington keyboard, Bluetooth keyboard will not work, help

I Made the mistake of updating and now my Bluetooth kensington keyboard purchased with ipad won't work. Anybody know a fix?

Reset Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

My Apple bluetooth keyboard will not reconnect with my MacBook Pro...

It's been working flawlessly until this morning...I tried everything. It's still listed under devices but keeps giving an error message for connecting. New batteries and all. I rebooted my comp and also tried the erasing of keyboard in the previous BT devices list. I've been battling with this for over 3 hours now, any help will be greatly appreciated!

Try resetting the SMC.
Barry

ITunes will not exit Full Screen Mode.

It automatically boots into a Full screen desktop, and has no menu bar on top hover. I have hovered and pushed to every corner, no menu drops down. I need to be able to turn off full screen. WIthout a magic mouse or touchpad, I cannot switch out of it easily. This stinks!!

Welcome to Apple Support Communities
First, open System Preferences > General, and make sure that "Close windows when quitting an application" is marked. Then, open iTunes and press the Esc key to get out of full-screen, and close iTunes. The next time it starts, it should be in a classic window

Can windows 8.1 in boot Camp display in target display mode on an IMac?

I have given up on Windows 7 running in Boot Camp on my 15" MacBook Pro and displaying it on my 27" IMac via thunderbolt and Target Display Mode.
The FAQ concerning Target Dsiplay Mode farily clearly says Windows 7 won't work.
But it does not say Windows 8.1 will or will not drive Target Display Mode via thunderbolt.
see: http://support.apple.com/kb/HT5219, question 29
Has anyone found that running Windows 8.1 in BootCamp on a MacBook Pro Retina mid 2012 will display via a thunderbolt cable in to Target Display Mode on a late 2013 IMac 27"?
I don't want to go to the trouble of installing Windows 8.1 and trashing my otherwise functional Windows 7 Boot Camp installation unless it is going to display properly on my late 2013 27" IMac running OSX 10.9.3 via thunderbolt.
Thanks in advance!

no, tdm doesn't work under bootcamp regardless of which windows is being used, imho i don't think it will ever work under bootcamp

Connecting iphone 3gs to imac using bluetooth

How can i connect my iphone 3gs to imac using bluetooth. On the mac it displays that my iphone does not have the "necessary services". On the iphone it just has the loading circling and not even recognizing a device. Plz Help.

For what purpose are you trying to connect the two?
The only thing you can connect a Mac to an iOS device for is Internet Tethering (Personal Hotspot) - nothing else.

Target Display Mode: Lenovo T420 DisplayPort to iMac (2nd screen) does not work

Configuration:
- Laptop Lenovo T420, DisplayPort, Windows 8.1
- DisplayPort cable, Adapter to Mini DisplayPort
- iMac (Intel, 27-inch, Mid 2011) as 2nd screen, connected via Mini DisplayPort Adapter, Mavericks OSX 10.9.1
Problem:
- iMac does not start Target Display Mode
- Even cannot be forced via Cmd + F2 or Cmd - Shift - F2
Test:
- Lenovo via DisplayPort cable to 2nd screen works fine
- Can switch between PC only, Duplicate, Extend display
Question:
- What is wrong?
- What can be done to idenify the root cause?
Kind regards, Marcel.

Hello Marcel,
It sounds like you are wanting to use the iMac in Target Display mode with your PC. Target Display mode is a feature that is supported from one Mac to another Mac according to this article:
OS X Mavericks: Use another Mac as a display
http://support.apple.com/kb/PH14264
Target Display Mode lets you use a Mac as the external display for another, “primary” Mac.
Thank you for using Apple Support Communities.
Cheers,
Sterling

IMac will not boot from any mode except Target Disk

I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot, and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
I reformatted the HD and installed 10.7 again, it still freezes up at the same point.
I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
UPDATE...
Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own. I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
I did manage to have it start one time got a copy of the the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
Specs...
The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
Error Report…
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

Here is the complete error log...
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80602db800 : 0xffffff801a41d5f6
0xffffff80602db870 : 0xffffff801a4b7b95
0xffffff80602dba40 : 0xffffff801a4ce4ad
0xffffff80602dba60 : 0xffffff7f9bab8654
0xffffff80602dbb60 : 0xffffff7f9baa218c
0xffffff80602dbbb0 : 0xffffff7f9baa20e2
0xffffff80602dbbd0 : 0xffffff7f9ba73554
0xffffff80602dbc00 : 0xffffff7f9aa8d470
0xffffff80602dbc40 : 0xffffff7f9aa8d3df
0xffffff80602dbc60 : 0xffffff7f9aa926ec
0xffffff80602dbcf0 : 0xffffff7f9aa8af20
0xffffff80602dbd20 : 0xffffff7f9aadacc7
0xffffff80602dbd70 : 0xffffff801a833b9b
0xffffff80602dbdc0 : 0xffffff801a862d57
0xffffff80602dbe30 : 0xffffff801a497cef
0xffffff80602dbe80 : 0xffffff801a420abd
0xffffff80602dbeb0 : 0xffffff801a410448
0xffffff80602dbf00 : 0xffffff801a4195fb
0xffffff80602dbf70 : 0xffffff801a4a5ad6
0xffffff80602dbfb0 : 0xffffff801a4ced13
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
         com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
         com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
            dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide:     0x000000001a200000
Kernel text base: 0xffffff801a400000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26349024446
last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
loaded kexts:
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
com.apple.driver.AppleHDA          2.3.0f2
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMuxControl          3.2.6
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIRController          320.15
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.1
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AirPortBrcm43224          600.36.17
com.apple.iokit.AppleYukon2          3.2.3b1
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleUSBUHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOATAPIProtocolTransport          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
USB Device: Trackball, 0x046d (Logitech Inc.), 0xc404, 0x1d120000 / 4
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

My blue tooth keyboard will not connect to my computer

Hi evey body,
I have just got a new Blue Tooth Keyboard and Mouse.
but I have a problem, the mouse connect to my iBook and works fine, But the Keyboard will not work, I am using the Bluetooth setup assistant,I have Follow the instructions and I get the set-up numbers, I have enter the numbers a couple of times, but all I get is a message saying “The pairing attempt was unsuccessful. Make sure your keyboard is in range of this computer,turned on “discoverable”. When ready. click Continue to try again” I do it but it will not set up,
the keyboard is right next to the computer,and is switch on and it has new battery's,and it is discoverable.
but it dose not want to work, the green light on the back of keyboard comes on,
but the light on the cap lock on the keyboard will not come on, when I press it .
so can some one tell me what is going on and what can I do to get my Keyboard to work.
thank you
will
iBook Mac OS X (10.3.9) new blue tooth keyboard

Hello London William:
Welcome to Apple discussions:
This Apple knowledge base article has connection troubleshooting suggestions:
http://docs.info.apple.com/article.html?artnum=86496
Barry

Dec 2012 iMac using bluetooth keyboard will not exit Target Display Mode

Similar Messages

Maybe you are looking for