December update fixes AJA output

I just got updates to CC this morning.
Kona3 now outputs to my broadcast monitor.

Similar Messages

New iPod Software Fixes Sound Output Bug?

I have speakers and an FM transmitter for my iPods that connect via the dock port. My nano frequently refuses to output sound and I have to do a reset each time I plug it in. I've heard that its a common bug and that new accessories will not have problems with nanos.
I've down some limited testing and it seems that this current update fixes this bug. Has anyone else noticed this?

I hope you are right because I have been experiencing this same issue with my belkin auto adapter (F8V7058-APL-BLK). I have to manually reset the ipod nearly every time I plug it in. But if it has fixed the issue then it has brought up a new bug listed in this thread:
http://discussions.apple.com/thread.jspa?threadID=309896

HT6114 Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?

Hi Mac,
Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?
Thanks in advance,
Ricardo Arguelles

Sordidloam wrote:
So to be clear, this issue occurs on any input with the Denon Receiver. Occurs from both HDMI out and MiniDisplay Port out. Goes away when we reinstall the OS and update it to 10.9.2. Comes back as soon as we update to 10.9.3.
Cheers
MLE
Have you been able to use the Mac Mini directly attached to the plasma/LCD/projector with out going through the Denon AVR? Even with 10.9.3 installed?
I have a Pioneer AVR and I have the Mac attached via a HDMI to HDMI and all is working for me. Can your Denon do some upscaling? Some AVR, like my VSX-53 can change the scaling of the input video. Meaning if I still had my Apple TV 2 which outputs 720P only, can be upscaled in my AVR to 1080i or 1080P or even 24fps. Heck, I could even plug in an old style Red, White, Yellow cable and upscale it to 1080P and output it HDMI.
I am wondering if your Denon is able to do that and it might be set wrong. Check the owners manual for such settings. Even the plasma/LCD/project could be doing the upscaling too. So check that too.
KOT

EFI Update Fixes XP Performance ... Even with X1900

Before installing Windows XP in my Mac Pro via Boot Camp, I just wanted to make certain that the recent EFI firmware update fixes all the issues, including for Mac Pros with the X1900 video card.
Thanks,
Clark

Making it easier, and better support, and eliminating known issues; but, ALL the issues is a tall order.
Also, it is probably a lot easier to skip the BootCamp partition and just throw another small drive in.
Searching for "X1900 + Boot Camp" by date yields:
EFI Update fixes XP performance even with X1900
Mac Pro 2GHz 2GB WD Raptor/Caviar RE 320 Mac OS X (10.4.7) 2 x APC RS1500s

Verizon iPhone 5 Update Fixes Cellular Use on WiFi Bug

If you have been seeing higher cellular data usage while you are on WiFi, good news, Verizon has fixed this bug. All you need to do is update your Carrier Settings to 13.1 and the bug is fixed.
For directions on how to update your Carrier Settings, see:
Verizon iPhone 5 Update Fixes Cellular Data Use on WiFi Bug - EVDOinfo.com
Be interesting to see if this fixes the issues for all those having the problem

I have the exact same problem!
I'm using the iPhone 5 now under Carrier M1 Singapore 13.0 and I have noted that over a period of 2 weeks, my cellular data usage has been about 2.7GB on an average. Since I know my bill has been capped at 3GB, I have since switched off my cellular data.
However, when I switched it on for a few days after using it for awhile, my cellular usage jumped by 1.2GB in just 1 day! And I used it as I would on an average day (like during an average day in the 2 weeks)!
I understand that there have been reports of a bug that have caused this problem in the US.
http://www.technobuffalo.com/companies/apple/iphone/verizon-iphone-5-cellular-fi x/
http://www.iphonehacks.com/2012/10/iphone-5-cellular-data-usage-over-wifi-bug-on -other-carriers.html
But I'm hoping that there's a solution for those living in Singapore? Do I seek the help from my carrier as well? But if it's a problem with the phone, then my carrier definitely would not help, right?

MS Office 2008 Update: fixes some print issues?

I noticed the first update for Office 2008 is out, and one "fix" they list for Word is:
Blank pages are no longer printed when you print to a high resolution printer. This update fixes an issue in Mac OS X 10.5 Leopard that causes blank pages to print when you print to a high resolution printer.
I know people have struggled with Samsung and other printers and Word since Leopard released. I do not have one of the affected printers so cannot test it.
The updater is here:
http://www.microsoft.com/mac/downloads.mspx
Offered for your consideration.
Allan

http://answers.microsoft.com/en-us/mac/forum/macoffice2008?tab=Threads
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Iphone 3G Software Update Fixes security vulnerability associated with viewing malicious PDF files?

Is there an Iphone 3G Software Update Fixes security vulnerability associated with viewing malicious PDF files? Latest version I can download is 4.2.1
I assume no fix is available, does anyone know if I'm still vulnerable to the security bug?

No fix is needed since that vulnarability isn't in 4.2.1.

After updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod. It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

after updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod. It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

Try:
- Reset the dock
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Otherwise you are out of luck. Apple is not making any more update for the 4G.
Also check with Phillips. Maybe they have an firmware update available

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

It is against TOU to speculate on these message board. Suggest you post your question on the Mac Rumors site.
As I already stated, there is no 10.6.8 update. If there was, it would be listed in Software Update.

HT1338 I purchased keynote, numbers, and pages when i bought my macbook air. However, the December update will not update because it says I do not own the software, but I do. What can I do to get the software to load? This is my first Mac so I am still le

I purchased keynote, numbers, and pages when i bought my macbook air in late september. the december update will not load because it says i do not own the software and returns an error messgae 100. i have read manuals and looked over the web but i cannot figure out how to get this software update to identify that i do own these three pieces of software. they are installed and usable. any ideas would be appreciated before i call apple support.
This is my first mac so i am still learning...
thanks

First, make sure you are logged into the App Store with the same AppleID that you used to purchase the apps.
If that is not it, look in the App Store under Purchases. Are they there?
If not, go into your account in App Store and click the link to show hidden purchases.
If they are still not there, use the support link in the App Store.
If they do show up, copy all the apps to an external drive, then remove them from your Mac. Go to the App Store, Purchases, and install from there.

I want to fix the output type neu permanently.

hi gurus,
while taking print output of po.i click on messages and put output type as neu.and then take print preview. but i permanently want fix the output type neu .i dont want to put output type neu every time .so as to take quick preview of purchase order .please provide me the solution as early as possible.

Hi,
If you have done all customizing setting & NACE setting and maintained condition record for message type in t.code : MN04. Now Just fine tune the output (message) type in following path:
SPRO>MM>Purchasing>Message>Output control>Message tyoes> Define message type for Purchase Order-->Fine-Tuned Control: Purchase Order
Now here select the check box corresponding to your output(message) type neu to have print output for this message type is automatically displayed & save.
Now try to create PO & u will have default message type neu automatically .
Regards,
Biju K

Is there any API to update Fixed Asset minor category ?

Hi,
My client need to update the minor category of 3000 Assets.
Is there any API to mass update Fixed Asset minor category ?
Thanks,
Joe

Hi Joe,
You could use the reclass API : FA_RECLASS_PUB.DO_RECLASS
Based on the new minor category, derive the correct asset category and pass it to this API along with other required parameters.
Regards,
Mukul

Did the iTunes update fix the BSOD problem?

iTunes was crashing this morning (with that C++ runtime error that several others were complaining about). I updated iTunes and it fixed the problem.
Does anyone know if this update fixed the "Logitech Web Cam causing the BSOD when syncing iPhone on to a Dell Computer" error?
I only ask because now when I sync my iPhone, windows recognizes it as an iPhone now, and not a Camera anymore. I just wanna know if I can reinstall my WebCam Driver again.
Is there somewhere that lists what kind of fixes were in the last update?
Thank you
Dell XPS m1210 Windows XP

No it did not. There are no iPhone enhancements or fixes in 7.3.1
It fixes an itunes library problem on the desktop or laptop that is all, and does not effect anything related to the iPhone.

How to calculatee Dep manually and how to update fixed assets register

Hi Gurus,
I have a issue like Asset vale is Rs. 1000 Dep % is 1st year 35% 2nd year 15%3rd year 15% 4th year35% for 4 years .if buys another asset in addtion to old asset Rs.500 the depreciation is same has earlie said percentage . my clients wants to post this depreciation manually.and how to update fixed assets register.
Regards,
Ssriram.

Hi
Depreciation terms are applicable to the entire asset (not for individual transactions). If you want to have different terms, you may create the additions as Sub-asset (Tcode AS11) to the main asset and enter depreciation terms.
Thanks
Palani

Can I get fixed length output after encryption using PBEwithMD5andDES?

Hi,
I am currently using "PBEWITHMD5ANDDES" algorithm to encrypt the string and later it is encoded using BASE64. I need to store the value in Database so I need output to be of fixed size. Currently output depends on the input string length. My input string can vary in length.
I cannot use Message digest for storing it database as I need to decode too.
Sonal

You can't possibly have a fixed encrypted output size regardless of the input size and be able to recover the original. Just think about it for a bit. This would enable infinite compression.
PBEWITHMD5ANDDES uses PKCS5 padding and so produces an output which is (n+8)/8 blocks of 8 bytes so 1,2,3 ... 7 become 8 bytes, 8,9,10 ... 15 become 16 bytes etc etc etc.

December update fixes AJA output

Similar Messages

Maybe you are looking for