Decent internal 2tb hard disk in the uk?

evening all!
can anyone recommend a hard disk for my 2009 macpro?
i want a 2tb one ideally which i can copy all my dvd collection too along with music and photos.
being new to the pro im after one that is tried and tested i guess! or anything i need to look for in one?
ive heard western digital are good, and to avoid seagate??
many thanks for any help
Message was edited by: sparkie1984

Hi again sparkie1984,
I am glad that my earlier comments were helpful.
Obviously the Caviar Green access times would be slower than the Caviar Black, because the former is a 5,400rpm model.
However, having said that, the following review reports that "it still manages access times we'd expect from a 7,200rpm model", and gives it a 4.5 star rating:
http://www.techradar.com/reviews/pc-mac/pc-components/storage/hard-disk-drives-h dd-/western-digital-caviar-green-2tb-587195/review
An earlier review also says much the same:
http://www.trustedreviews.com/storage/review/2009/01/27/Western-Digital-Caviar-G reen-2TB/p1
Other reviews which might be of interest:
http://www.pcpro.co.uk/reviews/hard-disks/252151/western-digital-caviar-green-2t b
http://review.techworld.com/storage/310352/western-digital-caviar-green-2tb-wd20 eads-review/
http://alatest.co.uk/reviews/miscellaneous/western-digital-caviar-green-2tb-wd20 eads/po3-69735271,2/
The Caviar Green 2TB is currently available from Amazon UK for £142.76, with free delivery, which seems to be a competitive price, and is over £80 cheaper than the Caviar Black 2TB.
For more info on the differences between the 2 drives see:
http://www.wdc.com/en/products/products.asp?driveid=773
http://www.wdc.com/en/products/products.asp?driveid=733
According to Western Digital:
The Caviar Green is ideal for "Environmentally friendly PCs and external storage requiring lower power consumption and cool, quiet operation".
The Caviar Black is ideal for "Power computing applications such as multimedia, video and photo editing, and maxed out gaming computers".
So it is really a matter for you to decide whether the Caviar Green meets your criteria or not.
If in doubt, I would "dig deep in my purse" for the extra to buy the Caviar Black.
By the way all my WD drives are quiet in operation. Even the 10,000rpm VelociRaptors, whose "whirring away" is only really noticeable at start-up.
Whatever you decide, I hope that you are happy with your choice.

Similar Messages

Can I use the time capsule as backup and hard disk at the same time?

Hi.
I want to buy a time capsule.
I wondered, if I can use the time capsule as backup (over time machine) and as a hard disk at the same time?
If I buy the 2TB time capsule, I wanted to use 1TB for the backup and 1TB for hard disk.
Is this possible?
Best wishes
Sophie

It is not recommended.. the problem being anything stored on the TC only is not backed up and cannot be backed up by the TC itself or Time Machine. So what are you going to do about back.. the TC can and do die suddenly.. and the cost of recovery can be huge.
See Q3 here for the semi-right way to do it if you must.
http://pondini.org/TM/Time_Capsule.html
You can plug a USB drive into the TC and use that for files.. but note, its speed is poor.. fine for wireless as wireless is even slower but you will really notice it if you expect the drive to be as fast as the internal.. it will be a fraction of the internal drive speed. 1/2 write and 1/3 read aprox.
See http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/7

Upgrading hard disk in the new aluminum iMacs

Hi all. Is a hard disk upgrade on the new aluminum iMacs something that a seasoned computer geek can do by his/her-self at home? Will it void the Apple warranty if it's not done by a certified specialist?
I want to pick up a new 20" iMac, and I'm having a hard time deciding whether I need to get a big disk now or if I can upgrade at home, on my own, down the road.
I did some research (on this site) on upgrading the hard disk in the last rev of iMacs, and it looks pretty simple. I also noticed that, according to Apple, as long as you adhere to their procedure (only touch the brass colored screws!) you are well within your rights under the warranty to replace the hard disk.
I could not find out if this policy was the same for the new aluminum models. Does anyone have an answer? I don't NEED a 500 or 750GB internal hard disk right now... but I'm sure I will WANT one at some point not too far down the road.
Thanks!

Here's a disk upgrade PHOTO-HOWTO for the 24" ALU iMac
http://forums.macrumors.com/showthread.php?t=350120&highlight=iMachard+driveupgrade
Apple can't legally "void" your warranty for just opening the cabinet. They can refuse to cover any damage you do -- but unrelated failures are still covered. Apple doesn't own the warranty -- you paid for it, and under US law, they are required to honor it.
Looby

Stop the beeps with the 7200 rpm hard disks of the MacBook Pro

http://www.hardmac.com/news/2009/07/13/stop-the-beeps-with-the-7200-rpm-hard-dis ks-of-the-macbook-pro
Stop the beeps with the 7200 rpm hard disks of the MacBook Pro
from HardMac.com by [email protected] (Lionel)
At the beginning of week, we have spoken about the unpleasant beeps made by the 7200 rpm hard drive proposed as an option in the MacBook Pro 2009.
A solution has been found, the details are given by Rémy.
These tedious beeps occur when the disc is inactive and are caused by a system
to reposition the play-back head carried out in a repetitive way.
In addition to the beeps of the hard drive, Mac OS X displays the pretty multicoloured wheel during some seconds while waiting for hard drive to finish these loadings and unloadings of the play-back head.
The solution comes with a utility of the name hdapm (for Hard Disk Advanced Power Management) which makes it possible to change the level of energy management (APM) of the hard drive.
Hdapm can be downloaded from : http://mckinlay.net.nz/hdapm; hdapm being a command line utility, it is thus necessary to use the Terminal (which is in /Applications/Utilitaires).
After copying hdapm into your user file, the command to enter is:
sudo ~/hdapm disk0 max
disk0 corresponds to the disc to regulate knowing that hdapm should function with any ATA disk supporting APM
max is the level of APM which is a number ranging between 1 and 254 included
the word following are preset and can used in the place a number for the level of APM
max (maximum performance) is the parameter to use to eliminate the “beeps”.
min (maximum economy of energy)
default (returns to the default setting)
The level of APM is a temporary adjustment in the firmware of the hard drive, this adjustment is lost when the disk is powered down and it is thus necessary to redo this at each for each start up.
To install hdapm so it is launched at each start-up, it is necessary to copy hdapm to the hard drive (/usr/local/bin is advised) and to copy the file hdapm.plist in /Library/LaunchDaemons.
It will be can be necessary to you to edit hdapm.plist with the desired parameters; the default settings are: the repertory where hdapm is /usr/local/bin, the hard drive is regulated on the first (disk0) and the level of APM is the maximum.
You can simply copy the file hdapm into /usr/local/bin file if you want to avoid modifying Plist.
Simplest way to reach these files is to use the Go/go to the file and to copy/paste this address before validating.

Yeah, I don't buy that. I spoke with Seagate a couple of months ago when I was looking for the impossible to find 500 GB 7200 RPM HD and asked them that very thing. They told me it would work fine, but I should disable SMS. Apple told me the same thing. I ultimately waited and got a non G-Force model, but Seagate told me it would work.
I also don't believe that they'd OEM the drive to Apple knowing it wouldn't work. That makes absolutely no sense. If Seagate knew the G-Force drive would not function properly in an Apple MacBook/MacBook Pro, and they OEM'd it to Apple for that purpose anyway, what does that say about Seagate?
I admit it's odd that the used the G-Force model given the presence of SMS, but apparently Seagate has prioritized the manufacturing of the G-Force drives and probably offered it to Apple.

Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it?

Had to buy a new PC as the hard disk of the old one broke and lost all purchases, but still have them on the iPhone. How can I sync them back to the new PC in iTunes?

Had to buy a new PC as the hard disk of the old one broke and lost all purchases, but still have them on the iPhone. How can I sync them back to the new PC in iTunes without losing them?

You should be able to:
Backup the device to the new installation
Transfer your purchases into a newly authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2

IMac can't running any two fire wire hard disks at the same time . which

iMac can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????
Message was edited by: KennyG1983

Hi KennyG1983-
How are you connecting these drives?
This may help: What to do if your computer won't recognize a FireWire or USB device
Luck-
-DaddyPaycheck

HT202796 I can not copy, modify, any file from my Mac to external hard disk, of the seagate brand (fast HDD Portable Drive) I don´t know if I need some software to copy and modify files in my hard disk external ? Could you help me please?

Hello I have a iMac with 3.4 GHZ intel core I7, memory 16 GB 1333 MHZ DDR3, and OS X 10.9.4 Software.
I have problems when I try to copy or modify any file from my MAC to MY PORTABLE DRIVE/DISQUE (external hard disk).
my external hard disk have the next features:
brand: Seagate
4TB
I do not know if I need some software such as: paragon or I need to configure my MAC,
Please help me..
Thanks a lot

Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(110769)

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

How do you disabled it if running the same?

Mac Pro can't running two fire wire hard disks at the same time .

Mac Pro can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????

I connect both hard disks that get power from power supply normally. Also have ever changed the format as GUID. Which always use the power cord . I felt confusion why the issue just happened connect both hard disks with extra power at the same time. If i used one hard disk connect to firewire port . Another firewire port connect other firewire device . No problem at all.

My mac can't find the volume" Data" on Time Capsule. Also Ican't find with the disk utility program the hard disk in the Time Capule; so I can't format the disk again. What can I do?

My Mac can't find the volume " Data" on Time Capsule, Also I can't find with the disk-utility program the hard disk in the Time Capusule.
So I can't format the disk in the Time Capsule
Deconnevt and then connecting the power tp the Time Capsule gives also no solution.
What can I do?
Joe

I listed the commands.. that is how you manually mount the disk.. follow exactly the commands I gave you.
In finder use top menu, go, connect to server.
Type in the following.
AFP://TCname or AFP://TCIpaddress (obviously you replace with the actual name or the actual IP address).
If that fails..
try
SMB://TCname
Here is the screenshot.
tardis4 being the name of my TC.
It should then ask you for your credentials.
And it should remember them in the keychain and be able to then get TM to connect.

How can I save captured clips to hard disk using the actual video recorded date, not the date I transferred it?

When using Batch capture in AP5.5, the clips are saved to hard disk using the capture date as the Created Date and Modified Date. How do I configure Premier to use the actual clips recorded date (Meta Data Basic/Date Created) so that I can view them in Windows folders and other applications based on the date the video was recorded, not when I imported it.

AFAIK, there's no way to do that with Premiere Pro. You can probably find a utility on the Internet that will change the dates for you after the fact.
Cheers,
Jeff

Error adding VM through Powershell: Virtual hard disk in the chain of differencing

I'm trying to programmatically create a VM from a .vhd file - my code is below. I'm getting a weirdo file not found error about disk chaining, but I've TRIPLE checked all my paths. Help is much appreciated!!!
Thanks,
Error:
ADD-VMHardDiskDrive : 'Testing' failed to add device 'Virtual Hard Disk'. (Virtual machine ID ADC7CF7D-2EC5-4428-B27C-6EDCF29F5922)
Failed to open virtual disk 'E:\will\VMTesting\Flash.480x800.vhd'. A problem was encountered opening a virtual hard disk in the chain of differencing
disks, 'E:\will\VMTesting\Flash.vhd' (referenced by 'E:\will\VMTesting\Flash.480x800.vhd'): 'The system cannot find the file specified.' (0x80070002).
My PowerShell code:
$n = "Testing";
$directory = "E:\will\VMTesting";
$vhdxPath = "$directory\$n.vhdx";
$vhdPath = "$directory\Flash.480x800.vhd";
$vm = Get-VM $n;
if($vm -ne $null) { Remove-VM $n -Force; }
New-VM -Name $n -MemoryStartupBytes (Invoke-Expression "1000MB") -Path $directory;
Set-VMMemory -VMName $n -DynamicMemoryEnabled $true -MinimumBytes 512MB -MaximumBytes 4096MB -StartupBytes 2048MB -Buffer 20;
ADD-VMHardDiskDrive -VMName $n -Path $vhdPath;
Start-VM $n;

Hi Will ,
According to the error message , please try to check the chain of differencing disk via "inspect disk.." .
# Create our New Differencing Disk
New-VHD –ParentPath T:\02R2June2012\08R2TemplateJune2012.vhdx –Path T:\lab50\lab50-PSDiffDiskVM\lab50-PSDiffDiskVM.vhdx -Differencing
For creating a differencing disk please refer to following link:
http://lyncdup.com/2012/06/creating-hyper-v-3-differencing-disks-in-server-2012-with-gui-and-powershell/
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Not transferring from the hard disk to the flash

Hi
this was the result that l got but the problem is that the file did not come from the hard disk into the flash memory the second time. I waited for at least 30mins and nothing happened. On top of the hyper terminal was the Transfer field which l used send and receive files sub at different times but the files do not transfer into the flash memory again. Pls could you advise me what more can l do, thanks.
rommon 1 > xmodem c2600-adventerprisek9-mz.124-9.t2.bin
Do not start the sending program yet...
         File size           Checksum   File name
     18836 bytes (0x4994)     0xd99d    bacdprompts/app-b-acd-2.1.2.2-ReadMe.txt
     24985 bytes (0x6199)     0xc81e    bacdprompts/app-b-acd-2.1.2.2.tcl
     35485 bytes (0x8a9d)     0x41de    bacdprompts/app-b-acd-aa-2.1.2.2.tcl
     75650 bytes (0x12782)    0x1ff9    bacdprompts/en_bacd_allagentsbusy.au
WARNING: All existing data in bootflash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file c2600-adventerprisek9-mz.124-9.t2.bin ...

Hi
I can't start with the IOS. The point is that it is waiting for the files to be transferred which l do not understand. So what l do is to switch off the 2620XM but the result it says is that l am stopping the file from been transferred which is a real puzzle to me. Because at first the IOS is been transferred but why it is going back to the rommom mode still beats my imagination.

Possible to attach external Esata hard disk on the Imac Quadcore 27?

Is it possible to attach external Esata hard disk on the Imac Quadcore 27? Or any other Imac? The purpose is for video editing, but maybe Firewire 800 is good enough for hd video in Final Cut Pro?

Hi Simen,
The iMac series do not have an ESATA connection and there isn't a way to make a connection inside. The only possible way is to perform surgery on the iMac which
1. probably will not work and
2. almost for sure Invalidate the warranty
This is a fairly common questions however there just isn't a way to do it. If your external drive also has a Firewire or Firewire 800 connection that is your best bet. As you probably know your iMac has a Firewire 800 port and you can daisy chain Firewire devices.
Regards,
Roger

Decent internal 2tb hard disk in the uk?

Similar Messages

Maybe you are looking for