Decentral Adapter

Hi,
Our Basis guys have installed a Decentral Adapter engine. I have done some configurations in the Visual Administrator and in the exchange profile.
The result is that I now see the technical system in the SLD.
However I do not see the Decentral Adapter Engine in the RWB or in the ID.
Please can you give me some guidance to resolve this issue.

hi
checkt this document on how to set up the connection from the decentral adapter engine and xi and how to use decentral adapter engine to configure CC
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
for decentral adapter engine you need to use ABAP SAP user management engine
check this :https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1532f46-0a01-0010-bc88-af3272254881
regards
kummari

Similar Messages

Sender File Adapter Not Showing in Decentral Adapter Engine

Hi,
We have recently implemented a Decentral Adapter Engine on a windows box. The adapter engine seems to be working fine because my adapters show and seem to work fine in it.
However, when I define a Sender File Adapter that uses File Content Conversion message protocol instead of just File messaeg protocol, the adapter does not show up in the decentral adapter engine.
I made sure that Adapter Engine parameter in the Sender File Adapter shows the new adapter engine but that does not seem to be working. If change the Adapter Enginer parameter to show the Central Adapter Engine, then I can see the Sender File Adapter on the Central Adapter engine and it works fine. (Note: The Central Adapter Engine is installed on a Unix box)
Here are the paramters I defined for the Sender File Adapter:
- Transport Protocol: File System (NFS)
- Message Protocol: File Content Conversion
- Adapter Engine: (new Adapter Name)
Source Directory: (
server/drive/path)
File Name: purchaseOrder.txt
Quality of Service: Exactly Once
Poll Interval (secs): 60000
Poll Interval (msecs):
Retry Interval (secs):
Processing Mode: Archive
Add Time Stamp (checked)
Archive Direcotry: (
server/drive/path/archive)
Process Read-Only files: (not checked)
Processing Sequence: By Name
Fiel Type: Text
File Encoding:
Operating System Command:
Additional Files (not checked)
Content Conversion Parameters
Document Name: MT_Request_File_Data
Document Namespace: http://nxy.tots/fg_admin
Document Offset:
RecordSet Name: Purchasing
RecordSet Namespace:
RecordSet Structure: Purchase_Record,*
RecordSet Sequence: Ascending
RecordSets per Message: 1
Key Field Name:
Key Field Type: String(Case-Insensitive)
Purchase_Record.fieldFixedLengths: 8,4,2,10,10,12,18,12
Purchase_Record.fieldFixedType: char
Purchase_Record.fieldNames: Request_Action,Request_PO_Num,Request_PO_LN,Request_PO_Date,Request_Purchasing_Org,Request_Purchasing_GName,Request_Created_By,Request_Vendor_Name
Purchase_Record.fileContentFormatting: trim
Adapter Status: Active
Advanced Mode: (not checked)
Your help is much appreciated.

Hi Alaa,
look into this document:
http://service.sap.com/nw-howtoguides -> Exchange Infrastructure -> Troubleshooting: Adapter Engine 3.0 (Expert Call slides)
If the File Adapter works without conversion, then you should count the number of fields in a row. If it differs from the configuration, then it runs on error.
Another idea is to check the content type of the file. When you do not enter a File Encoding, then the file adapter assumes utf-8. If the file is for example latin-1, then the number of characters in a row are not counted correctly.
Regards
Stefan

Advantages of using a decentralized adapter

What are the advantages of using a decentralized adapter engine

Hi Narendra,
Every XI installation will install a default adapter engine and these are called as the Central / Local Adapter Engines. Most of the times this one Adapter Engine is more than sufficient.
At times, when the load on your server is going to be high , you can install a Decentral Adapter Engines and these are nothing but seprate instances of your Adapter Engine that can pick data and send it to your Integration Engine.
The need for a decentral Adapter Engine also arises when you have security restrictions, DMZ , etc in the landscape where one adapter engie is used for one particluar DMZ and another acts as the local adapter engine etc.
The main advantage is load balancing and reducing risk of "single point of failure" so if something is wrong with central system or network then atleast your message will persist for later processing.
Another practical advantage is related to maintenance, every decentral AE is independent of other so maintenance will affect small set of interfaces not others.
See this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f8bd90-0201-0010-dd9a-c8a7f52c47aa
*Reward points if this helps
Regards
Vani.

Decentral Adapter Engine SOAP ( XI ) to ECC Proxy

Hi,
I'm facing a situation in one of our integration scenarios, where we have a Integrated Configuration ( Sender -> Decentral Adapter Engine -> Receiver ). File -> SOAP ( XI 3.0 ). On Adapter Engine I see the messages in OK status, but I didn't see them in ECC sxmb_moni...?
Could you please help me where to check, what could be a problem?
There are no issue in st22, no entries in smq2.
Many Thanks,
Milan

Hi Indrajit,
yes exactly I did that, compare the number of successfully messages leaving PI and entering ECC and I have different numbers. I have 6 successfull from PI, 0 in ECC...
This is the question, why? Where do I check except ST22, what kind of error occured. This happed once so far we are aware of...
Best regards,
Milan

Decentral Adapter not showing up in RWB

I have just installed a J2ee Decentral Adapter instance, configured the exchange profile to connect back to the main PI instance and connected it to the SLD (both the J2ee Decentral Adapter and main PI instance use the same SLD).
One of the last steps is to check see if the Decentral Adapter shows up in the PI Instances Runtime Work Bench (RWB), but it does not.
I've noticed that on the SLD, the J2ee Decentral Adapter shows up as a Technical System, but when going to the SLD > Administration > Content Maintenance > All Instances > Class: XI Adapter Framework, that only my main PI instances show up, not the recently installed J2ee Decentral Adapter.
Anybody have any ideas of what else to check ?
Thanks..SB

Aaron,
1.1 SAP XI AF CPA Cache are set at the defaults of the install. The SLDAccess is set to true which according to the following SAP Help doc says that the entris are ignored: http://help.sap.com/saphelp_nw04s/helpdata/en/29/22ee41c334c717e10000000a155106/frameset.htm
1.2 SLD DATA Supplier is set correctly. I can do a CIM Test and trigger the data upload successfully. Still no entry under the Content Maintenance though.
2. SXI_CACHE > Adapter Engine still does not show the Decentral Adapter. I've even bounced both systems and the SLD.
per Chirag I've also double checked blog "Basic Steps In Decentralized Adapter Engine
This Decentral adapter is in DMZ #1, so I must use the IP of my SLD for the SLD access and my Main PI is in DMZ #2. I've checked to make sure ports 50000 and 3300 from Decentral to my PI system work - are there any other ports ?
Thanks...Scott B.

Decentral Adapter Monitoring

Hi Gurus,
I'm trying to establish monitoring of the decentral adapter via the PI alerting framework.
However, when I create a rule, and select adapter engine -> adapter type -> MessagingSystem, I only receive errors which occur on my central adapter.
Is there a way to achieve this type of monitoring on the decentral adapter?
Thanks in advance for your help!
Kind regards,
Mark

Hi Reddy,
I have followed the following documents for the configuration:
http://help.sap.com/saphelp_nw04/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/76/661b410210ef6fe10000000a1550b0/frameset.htm
Kind regards,
Mark

Configuration Steps for Decentralized Adapter Engine

Hi all,
What all configuration steps are required to make Adapter Engine as
Decentralized AE.
I have made required changes in SLD DataSupplier in Visual Administrator.
what more configurations have to be done? On SAP XI Server and Decentralized
Adapter Engine.
With regards
Prasad

Prasad,
After configuring SLD data supplier in Visual Admin, you need to the following
1) Configure the gateway service for the central integration server on adapter engine host.
2) Perform Initial adapter engine cache refresh
3) Trigger data transfer to SLD
4) Check the connection parameters in exchangeProfile
5) Create HTTP destination pmistore in java environment
you have to go through all these tests for decentralized adapter engine. If you have XI configuration guide, it has all these steps in detail for you to configure
--Archana

Decentralized Adapter Engine

Hello,
We have installed an XI landscape (XID, XIQ, XIP) on Unix along with a single decentralized Adapter Engine on Windows (XD1) which is currently configured for use with our XID system. We would like to also use this same decentralized Adapter Engine with our XIQ system. However, when we export a communication channel from XID that is configured to use the decentralized adapter engine (af.XID.calxid1) and subsequently import the communication channel into XIQ the decentralized Adapter
engine that was configured in XID (af.XD1.calxid1) is
replaced with "Integration Server" (Default) in the Communication Channel configuration in XIQ. The pull down to choose an adapter engine shows only the (Default) Integration server as an available choice. Currently XID and XIQ are using the same SLD and the decentralized adapter engine (af.XD1.calxid1) is identified there. I have been unable to determine how to use the decentralized adapter engine with our XIQ system. Does anyone know whether it is possible to have multiple XI systems using the same de-centralized Adapter Engine? And if it is possible how does one configure the second XI system (XIQ) to use the decentralized adapter engine?
Thanks.

Hello Dan,
a decentralized AE can only be attached to a single Integration Server.
Regards,
Thilo

Decentralized Adapter Engine working

Hi guys,
I have installed a decentralized adapter engine for my XI Server. I have a scenario which i run with default Adapter Engine(Integration Server), runs fine.
However, when i run it with choosing Decentralized AE it gives such errors in
Message Monitoring:
Exception caught by adapter framework: null
Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
Also i am testing this for two simple file2file scenarios. It's acting differently; in a scenario sender commn channel picks file, in other not.
Is there any configuration settings that's remaining? Or something else?
Regards
Arpil

Hi,
For the picked message, i see this in moni....
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_XmlFile_out*</Trace>
<Trace level="1" type="T">select interface namespace urn:Plain2XML</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
Any clue?
Regards
Arpil

Decentral adapter engine - No Alerts - PI 7.1

Hi Guys,
decentral adapter engine - recently installed and working fine but we are not getting any alerts.
alert rule is active by default but stilll not getting any alerts for any errors on the decentral adapter engine.
we are getting alerts properly on central adapter engine.
any ideas or suggestions would be appreciated
Thanks,
Reddy

Hi ,
please go through the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0afdd69-a8a7-2d10-7e9a-cbf6fa21c5a7?QuickLink=index&overridelayout=true&49061411503734 --- STEP BY STEP
http://scn.sap.com/thread/1498569
http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=147266890
Regards
srinivas

Installaing decentral Adapter Engine (Java EE) 7.1 Including Enhanc

Dear All
we are installaing decentral Adapter Engine (Java EE) 7.1 Including Enhancement package 1 on Linux with database DB2.To do installation we have followed the installation guide "Adapter Engine (Java EE) 7.1 Including Enhancement Package 1 on Linux: IBM DB2 for Linux, UNIX, and WindowsTarget"
Accoridng to that document "In the Welcome screen, choose the required SAPinst installation option under the node SAP EHP1 for SAP NetWeaver Process Integration 7.1Installation >OptionsOptional Standalone Units >Partner Connectivity Kit." we have followed the same.
The installation has been completed successfully.But to do post-installation activities the java url in not comming up.
,we have tried with physical host and ip address as well.From os level we have found that server0 process is in running status.
I am not sure why the installation guide is asking us to follow Process Integration 7.1Installation >OptionsOptional Standalone Units >Partner Connectivity Kit?
Will you please let me know whether this is the correct procedure for Installation of Adapter engine on Pi 7.1 EHP1
is there any prerequisite steps are there for adapter enginee
Thanks and Regards
ravikiran.CH

Hello
From your description, it appears that you have installed a PCK and not a decentral Adapter Engine.
I guess you need to follow Process Integration 7.1Installation
-> Optional Standalone Units
-> Adapter Engine
You can undeploy the PCK by following the steps in the note #1295094 Initialization of PI 7.1 XITOOLS fails.
Regards
Mark

Soap LookupService with Decentralized Adapter Engine

Hi Experts,
I would like to use a Decentralized adapter engine with the Lookup Service on PI 7.1 , but when try to use that, it doesn't work, because Lookup Service is default configure to use Central adapter only. I would like how to set a decentralize adapter.
How to do a Soap Lookup using a Decentral adapter?
Now, I use the following:
Channel channel = LookupService.getChannel("BC_SF_***","CC**");
SystemAccessor accessor = null;
accessor = LookupService.getSystemAccessor(channel);
Thanks in advance.
Fernando Pena.

You define in the communication channel, which adapter engine should be used, not in the mapping.

Retrive SID of XI server from EJB used in decentral adapter engine

Hi Experts,
We have a requirement where we need to call an RFC from a EJB bean using load balancing. To do the JCO call, we need the SID of the XI system as an input parameter for the createConnection function.
The SID can be retrieved using System.getProperty("SAPSYSTEMNAME"), however, we need to know if this is called in a decentral adapter engine, whether the getProperty() function will return the SID of the XI server, when called from a bean used in the sender adapter of a decentral adapter engine.
Regards

> however, we need to know if this is called in a decentral adapter engine, whether the getProperty() function will return the SID of the XI server, when called from a bean used in the sender adapter of a decentral adapter engine.
The decentral adapter engine has its own SID. So you need another solution for retrieving the SID of XI server. Maybe a property file?
Regards
Stefan

Decentral Adapter Engine

Currently documentation only indicates the ability to create a single decentralized adapter engine. (1) Is this in addition to the existing central adapter engine or do I have to choose which one I will use? (2) Does the decentralized adapter engine have to run on its own WAS? (3) If I am planning for a high volume of messages will the decentralized adapter engine perform load balancing for my integration engine? (4) Can I have more than one decentralized adapter engine? (5) If so, how do I configure these decentralized adapter engines to communicate to my integration engine? (6) In addition, how do I control message flow from the integration engine to 1 to many decentralized adapter engines? Feedback as well as any reference to additional information is much appreciated.

Hi Kirk,
(1): in addition
(2): no, jou need to install J2SE adapter engine
(3): yes
(4): as much as you like
(5): you configure like in XI 2.0 with configuration files. That is described at the XI documentation. For messages going to decentral adapter use channel XI with specified URL, for incoming messages you don't need a channel.
(6):1 to many: Just put your receivers to receiver determination.
Regard,
Udo

START/STOP Decentral Adapter Engine

Hi friends,
We have a decentral adapter Engine .
it is possible to start the adapter engine(decentral) if no conectivity exist with the XI central system?
Thanks
Bogdan

Hi Udo,
Thanks for your help,
I try to start the engine, but nothing, in developer trace of server node i see that :
Thr 3204] * RELEASE     640
[Thr 3204] * COMPONENT   NI (network interface)
[Thr 3204] * VERSION     37
[Thr 3204] * RC          -10
[Thr 3204] * MODULE      nixxi_r.cpp
[Thr 3204] * LINE        8684
[Thr 3204] * DETAIL      NiPConnect2
[Thr 3204] * SYSTEM CALL SiPeekPendConn
[Thr 3204] * ERRNO       10060
[Thr 3204] * ERRNO TEXT WSAETIMEDOUT: Connection timed out
[Thr 3204] * COUNTER     1
[Thr 3204] *
[Thr 3204] *****************************************************************************
[Thr 2988] JLaunchIExitJava: exit hook is called (rc=-11113)
[Thr 2988] JLaunchCloseProgram: good bye (exitcode=-11113)
Regards
Bogdan

Decentral adapter engine sp14

Hi All,
Do we compulsory needed De central adapter engine and how to do this.
According my understanding If I use in my scenarios rfc/Idoc adpter i can use proxy server and central adapter.
Pls anyone clarify my assumption.
Venu.

Hi Venu,
no, you do not need a decentral adapter engine. Not for RFC and IDoc nor for any other technical adapter. The central adapter engine which will be installed with the integration server can hold all technical adapters (File, JDBC etc). Decentral adapter engines are only used, if there are special requirements such as network separation etc.
best regards
Christine

Decentral Adapter

Similar Messages

Maybe you are looking for