Decimal Error: Input must be in the format ___,___,__~.__V
Hi Gurus,
We have manual pricing in sales order. When i enter the price say, 0.405 USD/KG for a material..sytem throwing an error msg..
Input must be in the format ___,___,__~.__V
I have maintained SU01, OY04, CUNI settings properly..and system allows me to enter 0.40 but not 0.405..
Help me out to resolve this error..
Thanks& Reg
JJ
If I am correct, in oy04, we can see USDN only and not USD. Since I dont have access to SAP right now, not sure whether my understanding is correct.
Nevertheless, you can maintain 4.05 USD / 10KG so that the net value will flow exactly in sale order / billing.
thanks
G. Lakshmipathi
Similar Messages
-
Hi!!
While creating the BoM, I I put the quantity in DECIMALS then the system gives this " Input must be in the format .__.___.__~,___V" Error.
How do I Solve this?
Please help.
Thank you.
AjitHi Suhas,
Solved the problem.
Thank you.
Best Regards,
Ajit -
Hi,
Where in MM config can I edit the format of this message?
Input must be in the format ,__,___,__~.___
Message no. 00088
The system is allowing us now to GR quantities up to 3 decimal places. We would like to set it to 2..
Appreciate your help..
Thanks,
PaulaHi Paula,
I am afraid that it is standard system behaviour to be
able to input quantity with decimal places even if the corresponding
unit of measure has been defined with zero/blank decimal places. The
number of decimals from customizing CUNI is used for the calculation of
proposal values in some areas, but will not stop the user from manually
entering a quantity with decimal places if he decides to do so. In some
area, there may be warning message to inform user about it, for example,
warning message CO 139.
The field 'Order quantity' (RV45A-KWMENG) has assigned the domain MENG15
with Data Type QUAN and 3 decimal places allowed. For fields with Data
Type QUAN a different display of figures (with/without decimals) is not
possible and the customizing in CUNI is not taken into account (Please
see notes 95869, 122471 ). Decimals can only be avoided if the field has
format Floating point, and the conversion of floating points is done in
program routines and only in this case the decimals in transaction CUNI
are used. -
Hi Experts,
i have set a input-mask on a dynpro-field like "__.___.___,____V". So this functionality turns on an automatic input-check which checks the values against this mask (e.g. 4dec numbers).
Now, when i type in a value with 5 dec numbers, the automatic generated message "Input must be in the format __.___.___,____V" apperas. Can i swith this automatic message off, and instead create an own one?
THanks a lot in advance,
MarcelI don't think so. The program doesn't even go into the PAI in this case, does it.
You could turn off the mask and put in your own custom checks though.
Rob -
Problem: Input must be in the format _____ in SPAD
Hello everyone .. (sorry for my english)
I want to create a new page format with size in decimal, for example: width = 255.5 mm .. but i get error :
Input must be in the format _____
... I am going to TX SU01 and click in tab Defaults, i probe with all types of Decimal Notation but it does not work ..
Please help meeee. ThnksHi,
Inorder to create a new page format, goto SPAD transaction=>
Extended administration
Device Types tab => Page format => Create New
Enter the details in MM or CH or Points & save
SU01 is for user profile not for page format.
Best regards,
Prashant -
Hi Experts,
One of my user can able to create a PO, but when he tries to change or display the PO in Me22N he observes the below error,
Input should be in the form of ___.___.__~,__V
Message No 00 088
Please help me to resolve this issue.
Further any inputs required from my side please revert back.
Cheers,
Kumar.SHello Kumar..
In user profile setting is made in such a way that as a decimal he is using ',' (comma) and to differenciate between 100 and 1000 place he is using '.' (dot)... so please ask user to enter tht form only...
however, it can bring to normal setting by running the T - Code /nSU3 (by user himself).. in new window there will be three tab pages one of them is Default.... go this tab page and see what no. system u want... comma as decimal and dot as differenciator between 100 and 1000 or dot as decimal point and comma as differenciator between 100 and 1000....
Please check it with user and let me know if you have any further query on the same.
Thanks And Regards,
Krupesh Kothari. -
Unable to set PIN - Error: "PIN must not be the same as the user's phone number"
We are in an ongoing Lync Server 2013 deployment and have elected to set default conference PIN numbers for anyone that doesn't have them currently set. We decided to make the default PIN the same as the person's telephone extension. I realize
this is not a secure PIN setting, but please bear with me.
When I use PowerShell to loop through the people that do not have a PIN set and attempt to set the PIN to their five-digit extension, PowerShell returns the following exception:
Set-CsClientPin : PIN must not be the same as the user's phone number (Error "18005").
At line:1 char:1
+ Set-CsClientPin -Identity GenericUser -Pin '13579'
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (13579:String) [Set-CsClientPin], ArgumentException
+ FullyQualifiedErrorId : UserPin::SetPin::PinDoesNotMeetConstraints,Microsoft.Rtc.Management.UserPinService.SetOc
sUserPinCmdlet
I know what you are thinking: by default, Lync has the AllowCommonPatterns setting set to $false on the Global (default) PIN policy. But I have created another PIN policy called "Low-restriction PIN Policy" that has this setting set
to $true and assigned this new policy to the users I am trying to set the PIN on.
According to
Microsoft's documentation on the Set-CsClientPin cmdlet, the description for AllowCommonPatterns is as follows:
"Indicates whether or not "common patterns" are allowed in PINs.
Common patterns include repeating digits (225577); 4 or more consecutive digits (991234); and
PINs that match a user's phone number or extension number.
If set to True common patterns (such as the PIN 123456, which includes consecutive digits)
are allowed; if set to False common patterns are not allowed. The default value is False."
Given this information, I do not understand why Lync Server 2013 is preventing me from setting a default PIN that matches their extension number when AllowCommonPatterns is set to $true on the PIN policy assigned to the user.
Any ideas on what might be wrong?
PS C:\Users\user> Get-CsUser GenericUser | Select-Object PinPolicy
PinPolicy
Low-Restriction PIN Policy
PS C:\Users\user> Get-CsPinPolicy -Identity 'Low-Restriction PIN Policy'
Identity : Tag:Low-Restriction PIN Policy
Description : [20150224 SWS] Standard PIN policy.
MinPasswordLength : 5
PINHistoryCount : 0
AllowCommonPatterns : True
PINLifetime : 0
MaximumLogonAttempts :
PS C:\Users\user> Set-CsClientPin -Identity GenericUser -Pin '13579'
Set-CsClientPin : PIN must not be the same as the user's phone number (Error "18005").
At line:1 char:1
+ Set-CsClientPin -Identity GenericUser -Pin '13579'
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (13579:String) [Set-CsClientPin], ArgumentException
+ FullyQualifiedErrorId : UserPin::SetPin::PinDoesNotMeetConstraints,Microsoft.Rtc.Management.UserPinService.SetOc
sUserPinCmdletI just checked the management store replication status and it replicated. I tried to set the PIN again and got the same error. Here are my results:
C:\Users\user> Get-CsUser GenericUser | Select-Object PinPolicy
PinPolicy
Low-Restriction PIN Policy
C:\Users\user> Get-CsPinPolicy -Identity 'Low-Restriction PIN Policy' | Select-O
bject AllowCommonPatterns
AllowCommonPatterns
True
C:\Users\user> Set-CsClientPin -Identity GenericUser -Pin 13579
Set-CsClientPin : PIN must not be the same as the user's phone number (Error
"18005").
At line:1 char:1
+ Set-CsClientPin -Identity GenericUser -Pin 13579
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (13579:String) [Set-CsClientPin
], ArgumentException
+ FullyQualifiedErrorId : UserPin::SetPin::PinDoesNotMeetConstraints,Micro
soft.Rtc.Management.UserPinService.SetOcsUserPinCmdlet
C:\Users\user> Get-CsManagementStoreReplicationStatus
UpToDate : True
ReplicaFqdn : edge.domain.com
LastStatusReport : 3/3/2015 9:20:21 PM
LastUpdateCreation : 3/3/2015 9:20:18 PM
ProductVersion : 5.0.8308.556
UpToDate : True
ReplicaFqdn : frontend.domain.com
LastStatusReport : 3/3/2015 9:20:21 PM
LastUpdateCreation : 3/3/2015 9:20:18 PM
ProductVersion : 5.0.8308.556 -
ITunes as encountered an error and must close
Everytime I try to install/unistall or open iTunes it says it has encountered and error and must close. The error message where you can send a report. Also when I try to unistall Quick time. It will not let me.
hi TPee!
Also when I try to unistall Quick time. It will not let me.
it sounds like the initial problem is likely due to a broken quicktime. so if we can replace your QT, we should be able to get itunes launching again.
with that strategy in mind, could you let us know what error message you're getting when you try to uninstall QT? include error message numbers if you're getting any.
love, b -
How to change the format of a decimal input field?
Hello,
When creating an input field of type decimal the numbers appear at this format: 123,123.
Is it possible to disable this format and let the numbers to be displayed like this: 123123 ?
Regards,
RoyHi Roy,
Create a simple type in local dictionary of built in type integer. In the representation tab you can give any format you want. For your requirement you can give ####### in the format. You can also try other formats like ##,#### etc. Now create a context attribute and in it's type property give the simple type you have created by selecting the appropriate folder. Now map this attribute with the input field.
Regards,
Jaydeep -
Need the format for input file for standard program
hi can any one please give me the format in which the file to be uploaded to program RFBIBL00 ,
must be in for example my excel file to be uploaded has the following columns.
company code
accounting doc
line item
fiscal year
doc type
doc date
so is there any program which can create a file in the format to be uploaded taking this excel sheet.
i read the documentation but i am little confused about that.
thank you.Ok.. I have created one small test program for RFBIBL00.
That program uses this file format:
indicator company code fiscal year doc type doc date positng date header text Account posting key amount item text assignment number ....
H 0001 2007 SA 11/21/2007 11/21/2007 Test from RFBIBL00
D 106210 40 123.3 Line 1
D 106210 50 123.3 Line 2
H 0001 2007 SA 11/21/2007 11/21/2007 Test from RFBIBL00
D 106210 40 123.3 Line 1
D 106210 50 123.3 Line 2
Copy this data into one notepad and save it as .txt file. you need to provide this path to the test program.
The source code of the program (Currently it is only test version):
*& Report ZTEST_NP_RFBIBL00
REPORT ZTEST_NP_RFBIBL00.
TABLES: BGR00, " Batch-Input Mappendaten
BBKPF, " Batch-Input Tcode + Belegkopf
BBSEG, " Batch-Input Belegsegment
BBTAX, " Batch-Input Belegsteuern
BSELK, " Batch-Input Selektionskopf
BSELP. " Batch-Input Sel.positionen
DATA: BEGIN OF IT_FILE OCCURS 0,
IND,
BUKRS(4),
GJAHR(4),
BLART(2),
BLDAT(10),
BUDAT(10),
BKTXT(25),
HKONT(10),
BSCHL(2),
DMBTR(17),
SGTXT(30),
ZUONR(17),
END OF IT_FILE.
DATA: C_NODATA(1) TYPE C VALUE '/'. " NODATA
SELECTION-SCREEN: BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-T01.
PARAMETERS: P_LFILE TYPE CHAR70 OBLIGATORY,
DS_NAME TYPE CHAR70 OBLIGATORY LOWER CASE, "< Server file
GR_NAME(12) TYPE C DEFAULT 'FI_TEST'.
SELECTION-SCREEN: END OF BLOCK BLK1.
START-OF-SELECTION.
PERFORM UPLOAD_DATA.
OPEN DATASET DS_NAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
PERFORM INIT_STRUKTUREN_ERZEUGEN(RFBIBLI0) USING C_NODATA.
PERFORM SET_DATA.
CLOSE DATASET DS_NAME.
PERFORM SUBMIT_RFBIBL00.
*& Form upload_data
FORM UPLOAD_DATA .
DATA: L_FILE TYPE RLGRAP-FILENAME.
L_FILE = P_LFILE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = L_FILE
FILETYPE = 'DAT'
* HAS_FIELD_SEPARATOR = ','
TABLES
DATA_TAB = IT_FILE
IF SY-SUBRC <> 0.
MESSAGE S398(00) WITH 'Error while uploading'.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " upload_data
*& Form set_data
FORM SET_DATA .
PERFORM SET_BGR00.
LOOP AT IT_FILE.
CASE IT_FILE-IND.
WHEN 'H'.
PERFORM SET_BBKPF.
WHEN 'D'.
PERFORM SET_BBSEG.
ENDCASE.
ENDLOOP.
ENDFORM. " set_data
*& Form set_BGR00
FORM SET_BGR00 .
PERFORM INIT_BGR00(RFBIBLI0) USING BGR00.
BGR00-MANDT = SY-MANDT.
BGR00-GROUP = GR_NAME.
BGR00-USNAM = SY-UNAME.
BGR00-NODATA = C_NODATA.
TRANSFER BGR00 TO DS_NAME.
ENDFORM. " set_BGR00
*& Form set_bbkpf
FORM SET_BBKPF .
PERFORM INIT_BBKPF(RFBIBLI0) USING BBKPF.
BBKPF-TCODE = 'FB01'.
BBKPF-BLART = IT_FILE-BLART.
BBKPF-BUKRS = IT_FILE-BUKRS.
BBKPF-BLDAT+0(6) = IT_FILE-BLDAT+0(6).
BBKPF-BLDAT+6(2) = IT_FILE-BLDAT+8(2).
BBKPF-BUDAT+0(6) = IT_FILE-BUDAT+0(6).
BBKPF-BUDAT+6(2) = IT_FILE-BUDAT+8(2).
TRANSFER BBKPF TO DS_NAME.
ENDFORM. " set_bbkpf
*& Form set_bbseg
FORM SET_BBSEG .
PERFORM INIT_BBSEG(RFBIBLI0) USING BBSEG.
BBSEG-NEWKO = IT_FILE-HKONT.
BBSEG-NEWBS = IT_FILE-BSCHL.
BBSEG-WRBTR = IT_FILE-DMBTR.
BBSEG-SGTXT = IT_FILE-SGTXT.
TRANSFER BBSEG TO DS_NAME.
ENDFORM. " set_bbseg
*& Form submit_rfbibl00
FORM SUBMIT_RFBIBL00 .
SUBMIT RFBIBL00 WITH DS_NAME = DS_NAME
WITH CALLMODE = 'B'
WITH XLOG = 'X'
AND RETURN.
ENDFORM. " submit_rfbibl00
If you have any problem getting file, send me an e-mail (my id is on my business card) I will send you the file as a attachment
Regards,
Naimesh Patel -
External Drive Disk Erase Failed with the Error Input/Output Error
I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
MatthewSOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6) -
WebDynpro Exception: IDs with Namespace Must Have the Format / namespace /
Hi Experts,
Can you please help me with this:
I get the following error when I execute a webdynpro application. Can you please let me know where do
I need to look to verify the <namespace> and <id>.
Error when processing your request
What has happened?
The URL http://sapdev.tfi.local:8000/sap/bc/webdynpro/sap/z_temp_disp_mara/ was not called due to an error.
Note
The following error text was processed in the system DEV : WebDynpro Exception: IDs with Namespace Must Have the Format /<namespace>/<id>
The error occurred on the application server sapdev_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TABLE_COLUMN============CP
Method: NEW_TABLE_COLUMN of program CL_WD_TABLE_COLUMN============CP
Method: IF_WDR_VIEW_DELEGATE~WD_CREATE_UI_TREE of program /1BCWDY/6JQCRML58TRPAX42J5MQ==CP
Method: CREATE_UI_TREE of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapdev_DEV_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapdev_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Edited by: arshad mohammed on Sep 24, 2009 2:19 AMHello experts,
i got the same error but we use sap basis 700 with sps 15. What to do here? -
Hi When we run F.81 in some cases we get the error:
00 065: Enter date in the format __.__.____
In the header from the document I don't see difference with the working one's
How we can solve this?Hi,
Did you have an upgrade sometime back.
During upgrade to 604, a field is activated, in the active screen variant. T-code OLMRLIST with following input:
Transaction "****"
Screen variant ******
Program "*******"
Screen "****"
Then deactivating the "with contents" checkbox on "reference date"-field.....and problem was solved
This what I've done when I encountered teh same problem sometime back.
Good Luck,
Raghu -
Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.
jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby? -
Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.
-> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.
Maybe you are looking for
-
I know the image can fill the monitor, because at start up, the white Apple logo screen fills it up. But once the system starts up, there are bands of black framing the image. I have searched extensively on the internet and found the following clue
-
Error "logical end of file reached during read operation"
I am trying to burn a dvd of a wedding I did, and this is the error I am getting. After 5 hours of it trying to burn when I click cancel this it says " logical end of file reached during read operation". Does anyone know what this means, and how I ca
-
Trouble with SF 300-24P 24-Port 10/100 PoE
Good day. I connect to switch Access Point, configure port on switch which vlan work on this port. But after reboot AP my config for this port delete and have other config where vlan 1 untagged, and allow all other vlan. But in my cinfig allow 3vlan:
-
Encountered the error while installing Maintenance Wizard 2.18
Hi, I'm trying to install Maintenance Wizard on 11.1.0.6 RDBMS home. I encountered the following error : create_enc_wallet Calling mwwmpro.jar....File /u01/acc/oramw/product/11.1.0/db_2/eof/config/encr_wallet/cwallet.sso does not exists. Installation
-
Maintain Reference Business Partner for Consumers
hi all, i have Maintain Reference Business Partner for Consumers through the spro ( t-code : CRMC_BUPA_CONSUM ) that I find it wrong in another day, so can i delete one of the field that i have mantained for a particular reference bus partner ? if i