Decimal Numbers in Oracle Configurator

We are trying to use decimal numbers in a parent Option Class, such the example below:
Item Type Qty
- 000000x Option Class 0,14444
- 00000xx Option Class 1
What occurs:
When I used decimal numbers on an option class, the structure down of it and the same level of it doesn´t updating on Oracle Configurator.
There are any error message. But seems that the structure of this point to down is being ignored.
Today I have ~5,000 items that use the same structure on my BOM that would need to use this funcionality because the unit of measure is liter, and these items have different quantities of consume and all of them can be configured on Oracle Configurator.
E.g (According the width of the product that were configured, the quantity of paint necessary to build this product can be variable )
I don´t know if it´s work because i know that OM have some limitations about, but maybe somebody can help me in this issue.
Tks!

Have you found any solutions on this yet?
I have a similar problem and have an SR open at the mo for it! I am wanting to feed a decimal value out of the model and assign it against the (selected) child of the (selected) option class.
I have learnt to far that inventory is limited to 4 decimal places so its not going to work if you go over this number.
Then i learnt that an option class will nto support decimal places at all so you need to feed it directly to the child/ren and skip the option class. To do this I set up a Total feature and in my calculation rule I contributed the output to the Total feature. Then the total feature sends the output value to the child by the rule:
Contribute 'Dummy' * &x1.state() To &x1 FOR ALL &x1 IN {'MJ OUTER MAT OC'.Options()};
This isn't the correct solution but its nearly there. This assigns the value to all the children of the OC and not just the one that is required causing the whole model to fall over. If you have any solution to your issue or anyone can help me with this one, would be much appreciated.
Vikki

Similar Messages

BI Publisher Report does not display decimal numbers

Hi,
I have created a one page BI Publisher Report. I generally take the .xdm and .xdoz files and send it to the client which they upload on their server. The report has been coming up fine until recently there was a glitch on the Client Server. Now the report does not show a a section which has decimal numbers. I can see it perfectly on my machine. I am extremely frustrated to search for a solution and client is not very helpful in providing the information what went wrong or what was the fix on their server. Any help is greatly appreciated.
Thanks,
DRL

user8824622
If i am understanding your issue right i guess i have faced the same one while ago.
The solution for this one is, if you are on the latest patch or update, i am on July update
Go to
Administration--> manage Bi Publisher under Bi Publisher --> under run time configuration --> properties --> the last option on the list which is Use 11.1.1.5 compatibility mode true --> apply
now it should be working
Please let me know if it worked out and mark as correct if it have solved the issue
Thank You

Sql Loader - Decimal numbers showing in null column

Greetings,
My apologies if this is in the wrong forum section. It seemed to be the most logical.
I have added new column to a control file used in a sql loader upload and I am getting unexpected results. Long story short, I copy foxpro tables from a network directory to my local pc. A foxpro exe converts these tables to .dat files. Sql loader then uploads the .dat files to matching oracle tables. I've run this program from my pc for years with no problems.
Problem now: We added a new column to a foxpro table and to the matching oracle table. This column in FoxPro in null for now - no data at all. I then added the new column to my ctl file for this table. The program runs, sql loader does it's thing with no errors. However, in the new field in Oracle, I'm finding decimal numbers in many of the records, when all records should have null values in this field. I've checked all other columns in the oracle table and the data looks accurate. I'm not sure why I'm getting these decimal values in the new column.
My log and bad files show no hints of any problems. The bad file is empty for this table.
At first I thought the positioning of the new column in the fox table, .ctl file and the oracle table were not lining up correctly, but I checked and they are.
I've double checked the FoxPro table and all records for this new column are null.
I'm not sure what to check for next or what to test. I am hoping someone in this forum might lend a clue or has maybe seen this problem before. Below is my control file. The new column is the last one: fromweb_id. It is a number field in both FoxPro and Oracle.
Thanks for any advise.
JOBS table control file:
load data
infile 'convdata\fp_ora\JOBS.dat' "str X'08'"
into table JOBS
fields terminated by X'07'
TRAILING NULLCOLS
(SID,
CO_NAME "replace(replace(:CO_NAME,chr(11),chr(10)),chr(15),chr(13))",
JOB_TITLE "replace(replace(:JOB_TITLE,chr(11),chr(10)),chr(15),chr(13))",
CREDITS,
EARN_DATE date "mm/dd/yyyy",
COMMENTS CHAR(2000) "replace(replace(:COMMENTS,chr(11),chr(10)),chr(15),chr(13))",
DONT_SHOW,
PC_SRC "replace(replace(:PC_SRC,chr(11),chr(10)),chr(15),chr(13))",
PC_SRC_NO,
SALARY,
SALFOR,
ROOM,
BOARD,
TIPS,
UPD_DATE date "mm/dd/yyyy hh12:mi:ss am",
STUKEY,
JOBKEY,
JO_COKEY,
JO_CNKEY,
JO_ZUKEY,
EMPLID,
CN_NAME "replace(replace(:CN_NAME,chr(11),chr(10)),chr(15),chr(13))",
JOB_START date "mm/dd/yyyy",
JOB_END date "mm/dd/yyyy",
FROMWEB_ID)

I apologize for not explaining how this was resolved. Sql Loader was working as it should.
The problem was due to new fields being added to the FoxPro table, along with the fromweb_id column, that I was not informed about. I was asked to add a column named fromweb_id to the oracle jobs table and to the sql-loader program. I was not told that there were other columns added at the same time. In the foxpro table, the fromweb_id column was the last column added.
The jobs.dat file contained data from all columns in the foxpro table, including all the new columns. I only added the "fromweb_id" to the control file, which is what I was asked to do. When it ran, it was getting values from one of the new columns and the values were being uploaded into the fromweb_id column in Oracle. It is that simple.
When I had checked the FoxPro table earlier, I did not pickup on the other new columns. I was focussing in on looking for values in the fromweb_id column. When back-tracing data in the jobs.dat file, I found a value in the fromweb_id column that matched a value in a differnt column (new column) in FoxPro. That is when I realized the other new columns. I instantly knew what the problem was.
Thanks for all the feedback. I'm sorry if this was an inconvenience to anyone. I'll try to dig a little deeper next time. Lessons learned...
regards,

BO XI R2 - decimal numbers are truncated

Hi all,
When we create query in webitelligence the measure "item price" the decimal numbers are truncated/not shown. The right number is 23.123,55 but we get 23.123,00 ?
Configuration:
WIN 2003 server,
BOE XI r2 => IIS,
SAP int. kit XI r2
Thank you for reply!
Gregor

Hi Roman,
you can download the supported platforms list here [http://service.sap.com/bosap-support]. Just navigate to Documentation->Supported Platforms.
The work-around with the special system user may be used if you have truncation problems on your BOBJ server after installing the integration Kit for SAP. Please keep in mind that this is a work-around when using the integration Kit for SAP and not a recommendation for every installation. As far as I know this problem will be fixed in one of the future fix packs (at least for XI 3.x).
Regards,
Stratos

How to configure Oracle Configuration Manager in R12.0.4

Dear
I need to configure oracle configuration manager for my running R12.0.4 instance on single node setup.Whenever i try update my metalink credentials in oracle application manager dashboard,it says userid or password is wrong. While installation i skip the OCM screen. How can i configure it now either using Universal installer or comand line? Need all steps for setup?
Do i need to download & install OCM client or is it already shipped with software & needs just configuration setup?
Help me!
Regards

Ateeq,
Running AutoConfig should populate profile options with the correct values. However, you can check the values after running AutoConfig to verify it.
According to metalink document id, this Applications Server-Side Proxy Host And Domain profile needs to changed. Document id, will mention later.I forgot.Below are the notes:
Note: 297689.1 - Unable to update MetaLink credentials from OAM
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=297689.1
Note: 308369.1 - Unable to Connect to MetaLink from OAM After Updating MetaLink Credentials
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=308369.1

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

Problem with importing decimal numbers in Apex

Hi,
I have a ascii data file which I load into db tables calling a procedure in a db package.
Executing the procedure by SQL Plus everything works fine.
Calling the procedure by Apex button I get a "ORA-01722: invalid number; Error inserting subject" because of the decimal numbers in the data file. Taking the decimal numbers out of the file it works.
- I tried with different formats in the data file like: 4.40 4,40 4.4 4,4: Makes no difference.
- In Apex I tried column formatting in the report attribute: 999G999G999G999G990D00: Makes no difference, it's obviously only formatting the display.
- Debug mode just shows there is an error..
- The db column is of format NUMBER(10,2)
As I mentioned, with SQL Plus it works no matter of the number format in the data file.
Anybody has an idea where the problem might be?
Help is greatly appreciated,
Roger

Hi Joel,
Thanks for your reply. You were right, the NLS setting for the decimal separator in SQL*Plus is a , (komma) and in Application Express a . (point).
I suspected a NLS problem that's why I tested with different formats in the data file (4.40 4,40). Shouldn't that make a difference?
Now, to fix it: I didn't see in Apex any NLS settings, I checked in utilities and shared components. So, the way to do that is to directly write into SQL Workshop / Apex?
ALTER SESSION SET NLS_NUMERIC_CHARACTERS=",' "
Cheers,
Roger

How do I install Oracle Configuration Manager in oracle Fusion - discoverer 11i

Hello Gurus,
I need some guidance to install Oracle Configuration Manager.
I have just successfully installed Oracle Fusion - following "Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1.6.0) (Part Number E10421-07)" without OCM. I have EBS 12.1.3 and rdbms 11.2.0 on the same server.
Thanks
Mathias

ikaros wrote:
I have installed OracleAS 10g. What should I download now in order to install Oracle Portal 10g?Portal (actually Portal and wireless) is one of the three installation types of a full-fledged OAS 10g in release 1 and 2.
You need to have an infrastructure as a pre-requisite for a portal type OAS installation.
Please see this [link and the whole guide - click Content on the top-right|http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/mt.htm#sthref508] for details and then decide what have you installed that you are referring to as OAS 10g.
thanks,
AMN

Conversion of a binary data stream to decimal numbers

Hi
I am having great difficult working out how to convert my binary data stream to decimal numbers.
The data I am reading back is in the format of a binary string, starting with the Most Significant Bit (MSB) of the first word, then the corresponding Least Significant Bit (LSB), where a word is two bytes long. A carriage return indicates message termination. The return message starts with ‘bin,’ followed by the number of bytes requested. No delimiters are used to separate the data, but a carriage return is appended onto the end of the data.
bin,<first word msb><first word lsb>...<last word lsb><CR>
e.g. bin,$ro¬z1;@*...etc
Does anybody know of any examaple vi that can help me convert this data from binary to decimal numbers?
Many Thanks
Ash

Hi Ashley,
after getting the string you can strip the first 4 characters. After this try a typecasting to array of U16. If the numbers are not correct, you can add a swap bytes operation to the resulting array.
Message Edited by GerdW on 09-13-2006 02:46 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Convert.png ‏2 KB

Problem with decimal numbers..

hi i posted the other day with a problem I had. I thought it was all sorted but I have just realised that there is another problem.
I have the following code for an applet:
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class TextFieldExample extends Applet implements ActionListener {
TextField textInput;
String text = "";
public void init() {
textInput = new TextField (20);
add(textInput);
textInput.addActionListener(this);
public void actionPerformed(ActionEvent e) {
text = textInput.getText();
repaint();
public void paint(Graphics g) {
     int x = Integer.parseInt(text);
     double y = Math.abs(x);
g.drawString("You wrote " + text,20,500);
     g.drawString("The absolute value is: " + y,20,100);
I am trying to do the applet so when you type in an angle, it tell you the sine, cosine etc. I can get it to work with whole numbers like 1,10,300, but it won't work when i try to use decimal numbers. Can anyone help?
Thnk you in advance!


Hi,
you are using Integer.parseInt() to convert the input, so it will only work if the text is an integer. Use Double.parseDouble() instead.
Andre

Sorting xml content based on decimal numbers

hi,
I would like to proceed a sorting an xml content. So, when the sorting elements are numbers, I must add the dt:dt="number" attribute in the concerned tag.
But when this number are decimal numbers, it seems that the sorting occurs only when the decimal separator is the '.', but it does not work when the decimal separator is the ','.
So is there a solution for sorting decimal numbr with the decimal separator ',' ?
Thanks in advance
Bye

Typically the best way is if you know the name of the default table that contains your document. You do the update on the default table as follows
update yourTable t
     set object_value = updateXML(...)
where ref(t) = (
                 select extractValue(res,'/Resource/XMLRef')
                   from resource_view
                  where equals_path(res,'/some/path/mydocument.xml') = 1
                      )

Oracle Configuration Manager - EBS R12.1.1

Hi ,
EBS R12.1.1, on OEL 5.4
Is there forums for Oracle Configuration Manager?
I am trying to configure it, but as usual the docs is very topsiturvy.
Identifying If Oracle Configuration Manager Is Already Installed or Configured
Oracle Configuration Manager is included with many Oracle product lines. To verify if
it has been included, check for the presence of the ccr directory under $ORACLE_
HOME. If the ccr directory exists, you must verify whether it has been configured.
■ Navigate to the ccr/bin directory and locate emCCR. If emCCR exists, OCM has
been configured.
■ If emCCR is not present under the ccr/bin directory, OCM has been installed but
not configured.
If the ccr directory does not exist, Oracle Configuration Manager has not been
included with your Oracle release.
Note: For the middle-tier of Oracle E-Business Suite Release 12
installations, check for the presence of the ccr directory under the
$INST_TOP/ocm/10.1.2/ and $INST_TOP/ocm/10.1.3/
directories.
For the database tier, the ccr directory can be found
under $ORACLE_HOME.I searched the "ccr" at the apps tier:
[appldev1@apps1 ~]$ cd /u01/appldev1
[appldev1@apps1 appldev1]$ ls
DEV1
[appldev1@apps1 appldev1]$ find . -name "ccr"
./DEV1/apps/tech_st/10.1.3/ccr
./DEV1/apps/tech_st/10.1.2/ccr
./DEV1/apps/apps_st/appl/fv/12.0.0/mds/ccr
./DEV1/apps/apps_st/comn/java/classes/oracle/apps/fv/ccrAnd I searched the "ccr" at the database tier:
[root@apps1 ~]# cd /u02/oradev1
[root@apps1 oradev1]# find . -name "ccr"
./DEV1/db/tech_st/11.1.0/ccrWhy is that there are lots of "ccr" directories in the appstier?
And there is also existing on the dbTier.
Where should I install the OCR? in the apps tier or db tier or both?
Thanks a lot
MsK

Hi user;
If you follow Note:Oracle Configuration Manager and E-Business Suite Release 12 Release Notes [ID 406369.1]
As you can see in note +"Starting with Release 12, Oracle has updated the Oracle E-Business Suite Rapid Install, Rapid Clone, and AutoConfig tools to incorporate support for installing and configuring OCM."+
Please check your Applications context file via section 1. The information will appear in your in the following variables:
After you confirm this,please check Section 2: Configuring OCM after Installing Release 12
Modify your Applications context file on each node to add the CSI, OracleMetaLink user name, country code, and proxy values.
Its mean take backup of Applications context file on each node than add add upper information to your Applications context file on each node and run autconfig each node.(For adding parameter,please follow section 1. The information will appear in your in the following variables: )
If you dont know how you can edit Applications context file please check:
Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12 [ID 387859.1]
Regard
Helios

Oracle Configuration Manager - No database target

Hi,
i've installed the latest version of the oracle configuration manager (10.3.3.1.0) in my database home and ran the installCCRSQL.sh script successfully against the database instance.
Unfortunately i don't see any database instance target in the metalink system section nor if i run the "emCCR disable_target" command. A "Host", "Oracle Home" and a "Oracle Configuration Manager" target are available.
For the installation, i set the following environment variables:
ORACLE_CONFIG_HOME=/oracle/product/11.1.0/db_1
OLDPWD=/oracle/product/11.1.0/db_1/ccr/bin
ORACLE_SID=MIST
ORACLE_BASE=/oracle
TNS_ADMIN=/oracle/admin/network
HOME=/home/oracle
ORACLE_HOME=/oracle/product/11.1.0/db_1
I'm running oracle enterprise linux 5.4 and oracle database 11.1.0.7.
Can anyone tell me why I don't have a database instance target?
Regards,
P. Liniger

anyone?

Registration Service is unavailable (500); Oracle Configuration Manager

Getting error while installing OCM in red hat 4 linux server.
setupCCR -R ocm.rsp
** Registering installation with Oracle Configuration Manager server(s) **
Failure in registering with Oracle Configuration Manager server
Error encountered in registering. Registration Service is unavailable (500).

i am using proxy server , a day back it is wrking fine , but today i am seeing this error.
How can i test opening web page from my server ?Please let me know the steps?

Displaying line numbers in oracle Sql developer

hi guys, can someone tell me how to display line numbers in oracle sql developer Version 2.1.1.64?.

I absolutely didn't know where it was, so I had to look for it, and it appears easy to find.
Hit Tools
Hit Preferences
Expand Code Editor
Navigate to line gutter
Now click 'Show line numbers'
And, oh yes, there is a separate sql developer forum. Please keep sql developer issues in that forum.
Sybrand Bakker
Senior Oracle DBA

Decimal Numbers in Oracle Configurator

Similar Messages

Maybe you are looking for