Decimal place for qualitative characterstics

i have lot with 01 inspection type ,quantity 1.5 Litres,its a qualitative MIC with classed recording ,while result recording for this
quantity to be Accepted are rejected and partialy accepted,while entering the values i.e 1.5 its giving a error that is no decimal places are allowed,i checked all the Base units its all in Litres,how i overcome this type issue,

Yes system behaves as per setting you have done
1.You have selected Qualitative Char ,it means you should enter "accepted or rejected" etc.
but you have entered 1.5 this is a "Quantitative Value"
2.So You have make this char as "Quantitative" ,select the upper limit ,lower limit ,base value along with decimal places(say 2).
this will allow you to enter value 1.5 or 1.50 etc

Similar Messages

Decimal places for qualitative characterstics in inspection lot

i have lot quantity with decimal (i.e 2.5 Ltr),and lot is generated for 01 type inspection type,But we have assigned MIC's as qualitative characterstics,While result recording the MIC's are either accepted are rejected,for this in RRecording,I am entering the quantity 1.5Ltr Accepted and 1Ltr Rejected ,But system not allows me to enter Decimal places.
Now My question is why system not accepted the quantity but lot Quantity is in Decimal.
I know for qualitative character is attribute,it cannot accept the Decimal places,But we have assinged an inspection point to generate a rejection leter for above quanity. The Rej Letter fetches the data from resul recording.
can give any suggestion to enter decimal places in Resul recording.

Now My question is why system not accepted the quantity but lot Quantity is in Decimal.
In simple words Lot Qty is derived in inspection lot from the PO or GR qty whereas sample Qty or individual sample Qty is derived from the sampling procedure attached to a individual char.
Now As you rightly understood that for attribute char you really can not enter the decimal.what can be done is as you wrote >"the Rej Letter fetches the data from result recording">you can make the enhancement in the Letter fetching data like 1.5Ltr Accepted and 1Ltr Rejected
or
make enhancement & update table with User Exit :---->QEEM0003 User exit: add. functions after valuating insp. characs
I hope this may throw some light

Decimal places for JPY currency in change documents

Hi Gurus,
For opportunities in SAP GUI the change documents for JPY show incorrect numbers.
The number is divided by 100 (two decimal places added).
Checked the CDPOS table and found the values already divided (two decimal places added).
SPRO->General Settings->Currencies->Set decimal places for currencies is set for 0 decimals for JPY.
Is there any way I can get correct values in the change documents?
Please advice. Any hint is useful.
Thx,
Martin Kuma

Hi Naren,
Thank you for the tip, however the TCURX table is changed via customizing and should be changed only during the system initialization.
What I would like to do, is to assure that the system displays the values in change documents correctly. It should apply the currency conversion for the data displayed the same way it does for all the tables.
Do you have any idea, how should I do this?
Regards,
Martin Kuma

Decimal Places for Currencies

Impact on the processes of change at MM decimals for Currencies.
We want to use foreign currency to 6 decimals anand two decimal places for the currency of society

Dear José Luis Flores ,
Please always make sure your business process not reach the limitation of overflow during
the conversion as the Price it is always with 11 characters with 2 Decimal place (9,2) in standard.
All together 13 characters.
If this limitation was reached, you will received the dump message. This is normal and you had to
make sure it suits your business requirement in the beginning to avoid any changes later . You
had to plan it before do this type of customizing in very beginning.
Thanks
Ian

Changing the Decimal places for Percentage in cost distribution in SC

Hi Gurus,
Is it possible to change the number decimal places for the Percentage field in cost Assignment tab in Shopping cart in cost distribution option?
The user wants 3 decimal places, currently we can enter only 2 decimal places.
I have gone thro' couple of blogs which are talking about changing the price decimal and not the percentage field decimal. (in IMG setting: General settings > Currencies > Set Decimal places)
So, if anyone come acorss this issue, please let me know.
Thanks and Regards,
Nowsath

Decimal Places Factor of the Receiver Weighting Factors
Specifies the number of valid decimal places with which the given weighting factors are valuated.
Example
You enter 123456 as the weighting factor. Depending on the factor, this number is interpreted as:
Factor Decimal places Weighting factor
1 0 123456
10 1 12345.6
100 2 1234.56
1000 3 123.456
10000 4 12.3456
100000 5 1.23456
1000000 6 0.123456
Please check with your FICO consulant .what settings you have in backend system.
http://help.sap.com/saphelp_nw04/helpdata/en/bb/bdbdc4575911d189240000e8323d3a/frameset.htm
Muthu

Changing decimal places for currencies

Hi everyone,
I'm a complete begginer to SAP BI and I need to change a value in SPRO > General Settings > Currencies > Set Decimal Places for Currencies, but the option that I want doesn't exist.
I need to add a new entry with the value: currency - EUR6 and decimals 6, but there is no 6 available. Can anyone tell me where can I add this or what is the table where this information is???
Thanks in advance!
Rogério Brá

ok I think it works - just try and play
This is what I did (sort of same scenario - if you get my drift)
Currency Key MGF - translation ratio 1000:1
Exchange rate is : 11:02750 to the Euro
Invoice entered for 1,000,000.00
Currency calculated as 90.68 eur
(ie 1,000,000/(11.02750 * 1000))
You can play aroudn with direct/indirect to ge the factors right
But it works (I thought it did - I am qualified FICO honest!!)
This wont get you around displaying 6 decimals - BUT it will help with currency conversion

More DECIMAL places for MM price-Not Global

I have read the <u>many</u> postings on decimals. However, I have not seen the exact scenario I'm inquiring about.
I want to increase the decimal places from 2 to 4 for the cost of materials we purchase (i.e. supplier price), but I do NOT want to set this as a global aspect for the company when dealing with numbers/currency.
It's not just a simple matter of setting a different unit of measure, because let's say we order a reel of capacitors - the reel may come in qty of 1,000 or 2,500 (only one example). So, we really need to set price by (ea). The problem is that many of our parts price at .0014 (example) and in SAP that shows a cost or price [depending on where you're looking] of zero. Plus, the Purchasing agent sends a PO with incorrect price information.
<b>It would be very helpful if anyone could tell me how to increase the number of decimal places for specific fields as opposed to globally.</b>
Thanks you!!

The right tool to do that is the pice unit. This is in the system for ecatly that purpose, to provide more precision in prices. It has nothing to do with unitz of measure that is used for logistical purposes.
If you have a price 0f 0.0014 each you can set a price unit of 1000 and will have a price of 1.40 for 1000. You still can have only 500 or even 1 on stock. the calculation done if you receive your 2500 will be 2500 * 1,40 / 1000 which is of course the same as 2500 * 0,0014
best regards, Udo

Question about decimal places for currencies

hi ,experts ,
   here is the problem , when i use mb5s, i found the net price has been enlarged 1000 times . I also found the data of the table EKPO has been enlarged 1000 times. So ,i check the decimal places for currencies , i found there are five decimal places , the standard system is two decimal places .
   Does this mean that we cann't change the decimal places in SAP? If we can change , what should we do for configuration ？
Jarod

When running OY04, you are receivingin the following message:
Before you continue, please read the following
text carefully.
If you do not heed this note, you can cause
irreparable damage to the system with this
transacton.
In the R/3 System tables currency fields are
stored as decimal figures with a variable number
of decimal places. The decimal point is not
stored in the field in the database. Instead,
each currency field refers to a currency key
field. In this transaction you assign the number
of decimal places to this currency key uniquely.
Example: If you have set currency USD to have
two decimal places and you post an amount of 100
USD, an amount of 10000 USD is stored in the
Do you want to change the decimal places despite
all recommendations?

Changing Decimal Places for Currencies (Table V_TCURX)

The instance is ECC 6.0
We need to change the decimal places for a currency from 0 to 2 decimal places. Is there any impacts of doing that?
Also need to add some currencies which are not in the table. Is there anything need to be careful while doing this. If this table is updated, do we need to update any other tables also which may be impacted?

Hi,
It is not recommended that when postings have already been made, that a change in the currency be done, as amounts posted can become invalid or incorrect as a result (ie USD 100->1.00), which is most critical in production environment Please go through the note 137626 When you made changes via OY04, the effect of which is across all clients.
To change the number of decimal places for a currency already in use, you must convert all the tables in the R/3 System that contain currency fields, so that the data integrity remains. This cannot, however, for both organizational reasons and under the runtime aspect, in a productive system.
You must never change decimal places in a productive system if you have documents posted with this currency. Such a change could lead to inconsistencies in these documents already posted.
In case you really decide to use decimals you may consider to use SAP conversion services for them to convert all documents aready posted as explained in note 434349.
Additional inforamtion:
Note No. 137626 - FAQ: Decimal places for currency codes
                 126857 - Display of amts with correct decimal places in SE16
                   53206 - Processing of currency fields
                     9574 - Currency fields on selection screens
Regards
Ravinagh Boni

Decimal places for unit of measure

Dear All ,
If i change the Decimal Places for rounding in Customizing for Unit of measure ( CUNI tcode) for KG as 6 from 3 whether it will calculate with the 6 decimal places like 0.004756 ( earlier with 3 decimal places it will calculate any multiplication with 0.004 now i want the same with 0.004756 Kg )
whether it will work ?
and where it will impact

Hi
No it will not work like that. And it depend on the transaction where you enter that. In case of Purchase order quntity field it will be always with 2 decimal places because field MENGE has 2 decimal places only. If your system is already live then it is not advisible to do such changes.
Regards
Antony

Decimal Place for Percentage

Hi,
Where do we change the number of decimal places for percentage? Currently it is set as 3places. (e.g. 1.234% change to 1.2345%)
Thanks,

Hi Shiva,
As for the link you gave, we don't want to change the currency decimal place. We only want to change the number of decimals shown in a percentage value. (such 1.2345% instead of 1.234%)
Thanks,

Difference between Decimal places for Quatities and Units

Can anyone please explain the difference between the followings -
1. Number of Decimal places for Quantities, and
2. Number of Decimal places for Units
In SAP B1 2007B General Settings.

Hi,
The Decimal places in the general setting indicates
Amounts:Display of row and document details
Prices:Display for price fields in documents,item data,price lists
Rates:Display of decimals in currency calculation
Quantity:Display of quantity in documents and item data
Percent:Display used in calculation of tax amounts and discounts
Units:Display used in units(UoM) of items.
Also refer these note:[737880|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000737880]
Hope this is helpful

To Include Decimal places for set of Records

Hello,
I have an OBIEE Report with four Unions where the first union has the count and other have Sum as aggregation for the 3 measure columns. If iam using combine similar request and if I apply column formatting it applies to all the unions, but my requirement is to show first bucket (top union which are counts) as 0 decimal places integer and other union values as currency with 2 decimal values. Something like below
Col1 Measure1 Measure 2
A 100 200 ---> Values from First Union
B $ 2.35 $ 3.45 ----> Values from Second Union
C $ 1.25 $ 1.00 -----> Values from Third Union
D $3.67 $5.67 ------> Values from Fourth union
I tried to add round(column,0) to values in my first union but it does not work. Could you please help me on this, hope iam clear.
Unions - http://i51.tinypic.com/izcg2x.jpg
Edited by: 887893 on Sep 27, 2011 4:31 PM

You can't...This can throw errors like incapatible data types and all..
As a business analyst, I'd suggest business to go for: i.e using signs in row values only
Col1 Measure1 Measure 2
A(FTE) 100 200 ---> Values from First Union
B($) 2.35 3.45 ----> Values from Second Union
C($) 1.25 1.00 -----> Values from Third Union
D($) 3.67 5.67 ------> Values from Fourth union
Hope its clear

Query regarding decimal places for currencies

Dear all,
SAP standard allows 2 decimal points as default for any condition value. However, based on the entries in TCURX table we can set number of decimal places with reference to specific currencies.
In our system there is no entry in TCURX table against USD currency. Still the system is taking 3 decimal places against the expected 2 decimal places.
Is there somewhere hardcoded this for US or are they any additional settings impacting this? Please help
Regards,
Rajesh

Hi All,
I have been trying to set 3 decimal places. I got the reference to Note # 38881.
This is what I did:
1. Create a new currency US$ and set the decimal places to 3
2. Maintained the prices using VK11.
3. Changed the customers' sales area currency to US$
But when I created the sales order although the system determined the prices in 3 decimals i got the following information message which keeps on showing during the entire sales order creation:
Pricing error: Mandatory condition ZMAC is missing
Message no. V1801
Details are as below:
The obligatory condition ZMAC does not exist. The document is therefore considered to be incomplete from the point of view of pricing.
The cause can be, for example, that a condition record does not exist for condition ZMAC or that a field overflow has occurred when the condition rate was calculated.
Procedure
Check why the condition could not be found. Use the pricing analysis function on the pricing screen to do this. If necessary, add the missing condition manually to the document.
I believe I am missing some configuration that should be done in pricing, not sure what. As this question has been flagged answered, hope someone would be able to help me.
Thanks & Regards,
Rajesh Singh

Decimal places for formula variable

Hello,
I have created a formula variable of type manual entry and type number. I'm multiplying it to an amount. The problem is that the user is unable to enter a decimal place value.
eg:
cannot enter 0.5 or 0.05. the query regards it as 5 (converts 0.5 or 0.05 to 5)
when i enter 5.1, it converts it to 51
when i enter 51.11, it converts it to 5.111
when i enter 51.111, it keeps it the same and does not change it.
Is there a setting that i need to change in the query or the fomula variable? I need the variable to accept decimal values with out changing the decimal places.
Regards,
Sameer

This was an issue with the number format setting for the user.
His setting was 1.000.000,00 and he was trying to enter it in this format: 1,000,000.00
Hence I noticed the fictional change in decinal places.
Should have caught it sooner.
Regards,
Sameer

Decimal place for qualitative characterstics

Similar Messages

Maybe you are looking for