Decimal places display at the time of results recording

Dear All,
Please i faced one problem, At the time of results recoridngi/.e,
In my insp. plan i defined Quantitative specification as 70.0 with '1' decimal place in Qunatitative data. but after results recording it displaying one more decimal place excessi.e., as 70.00. How can i solve this problem, due to what this problem is occure. Please if any, solve its urgent.
Regards,
Vijaya

Dear Vijaya,
While entering Inspection Characteristics.. There is a field called DecPlaces on the right. its the 24th field on the item table.
The field comes after
Method, Insp Method plant, Version, Sampling Procedure, Sample Unit of Measure, Base Sample Quantity, SPC Criterion, Modification Rule, Test Eqpmt, Test Equip Short Text, Par Sample, DecPlace, Unit of Measure, Target Value, Lower spec Lmt, Upper Spec Lmt... and so on...
Regards
Vijay

Similar Messages

Employee ID & Password at the time of Results Recording

Hi Gurus,
At the time of results recording there is a need of entering employee id, password & some additional text. Is it possible?
Thanks in Advance,
Sandeep

Hi
Use digital signature for this scenario. SPRO > Envt>Central functions>Auth.Mgt>Dig Sign. In this signature method for results recording. All this linked with Material Authorization Group in MM-QM View. Read more on digital signature. You will get the solution.

How can i get the time and result together show in one Array or in Cluster?

hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
I post the time and voltge NOT together photo
Attachments:
12345.GIF ‏54 KB

You can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
Message Edited by smercurio_fc on 10-17-2007 03:15 PM
Attachments:
pic.PNG ‏11 KB

0QUANTITY - Six decimal places - Rouding to the third decimal place

Hello experts, how are you?
We are facing a problem with decimal places here in the project.
We're using M3 unit of measure and the user required 6 decimal places.
We already changed ANDEC and DECAN fields from T006 table to value 6,
the key figure itself (0QUANTITY), the key figure in the InfoCube and in the input-ready query, but the recorded data is being rounded to the third decimal place.
Can someone help us with it?
Thanks in advance,
Helder Rios

Hi,
First of all I'd like to thank you for your help guys.
Ashish, I changed the data element RSKYFQUA to 6 decimal places. But when I try to activate the cube, the system is not able to re-create the fact tables.
Do you know if there's a solution for it?
Thanks in advance,
Helder Rios

Double value truncated to two decimal places without rounding the value.

I want to truncate double value to two decimal places without doing the rounding of the value.
Is there any method which can directly do the truncation.

There's many ways to achieve this such as using
BigDecimal's setScale method or type-casting. This is
the way I like to do it:double d = -5.239;
d = d > 0 ? Math.floor(d * 100) / 100.0 : Math.ceil(d
* 100) / 100.0;
Your division by 100 may cause an rounding error, because there are numbers which no finite binary representation. That's splitting hairs! I know ;-)

How to delete the Time Evaluation Result in the CLSTB2

Hello,
does anyone know how to delete the time evaluation result in the CLSTB2?
thanks.

Hi Ling,
SE38
program RPUP2D00
Relation Id is B2
in sort field give pernr
tick the check box of delete.
password is your id (ex : saphcm)
Regards,
Harsha

Is it possible to disable the autodimm function, so that the clock can be displayed all the time?

Is it possible to disable the auto dim function, so that the clock can be displayed all the time?

At this time it is not possible. Sorry.
Being able to do so would dramatically decrease your iPod's battery life between charges.
B-rock

Time writing results recording

Is it possible to write time during results recording? I'd like to generate a report to check how long has been worked on specific analysis or operations?
Thanks.

Yes It is possible to maintain time required for any inspection for a particular char.
1 in result recording , select char-->extras (at header) ->inspector, date, inspection time (Select this)>enter the start and the end time reqd for this char.
this is the standard method
2. if u want it in hour basic then u can select char-->extras (at header) ->insp description> short description--> enter hour's here.
we can get this data in table QAMR -PRUEFZEITV PRUEFZEITB FOR 1ST and PRUEFBEMKT for second option

How to get the exact decimal places displayed while exporting to Excel?

Hi All,
I have a requirement to display the exact decimal place values in my report. In my pivot table, i duplicated a column named order number and converted to percentage by applying these conditions Show Data As-> Percent Of-> Column. I got a resultant column with one decimal point. As i needed two decimal points i took the xml of the report and changed the minDigits='2' and maxDigits='2' values like this. After that i got the accurate answer. But when i export it as excel sheet it is not showing the % column properly. The values after 0 is not getting displayed. Any solution for this?
Thanks in Advance
Thenmozhi

Hi Thenmozi,
You can try adding the below statement in the Custom CSS section of the your column properties.
mso-number-format:"\@"
Edit your report--> Criteria-->which column you want to display in excel click column properties --> select CCS--> Paste here above code.
Second way:
Edit your report --> criteria-->click fx option for your column and apply the below code.
2. '<span style="display:none">&nbsp</span>' || CAST(your column name AS CHAR)
Award points it is useful.
Thank,
Satya

Number with more than 10 decimal places display as 0 in report

We have a number stored on a table as this long with several decimal values.
2440.159999999999854480847716331481933593
On one PC it display in a Crystal report as 0 and to another user it displays at the 2440. The report formats the display field with 0 decimal places.
Is there a max precision setting at the database level that is causing this?
It seems I can add an SQL express as follows:
Round ("ORDER_RELEASE"."TOTAL_WEIGHT", 2) to resolve the issue but cannot determine could be causing the differences in display among two different client PCs running the same report.

Hello,
CR was built using C++ and therefore the max number is 15 digits plus 1 for the sign of the number.
Cause could be different runtime of MS C++ but hard to say for sure. I any event the only work around is to use Store Procedure and break the field into 2 parts. The in CR add a text object and drop the fields into it next to each other. For doing any calculations on them you'll also have to do that in the SP or handle each field manually.
Thank you
Don

DVR STB will not hold the display of the time of day.

I am new to FIOS. I have a DVR Set Top Box for my HD TV. I prefer to see the time of day displayed. I set this option in Menu/Settings/Set Top/Display and it works OK UNTIL you change the channel. Then it displays the new channel and DOES NOT revert back to the time of day as it is supposed to do.
Called Verizon. They reset the box. It worked OK for about 30 minutes then went back to the same problem. I don't want them to reset it again because when they did it wiped all of my favorites.
Any solutions will be greatly appreciated.
Solved!
Go to Solution.

Try rebooting the STB and then change the clock setting and change it back. That worked for me when i had this issue. I have seen this reported a couple of times and most of the time if this fix didnt work, the issue resolved itself within a couple of days.
Also, it should be noted that with the 1.7IMG release they changed the way the front display functioned. It now changes to show the channel number at every program change and then reverts back to showing the clock after about 2 minutes.
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"

I wanted to keep my locked screen display with the time and date from turning off is that possible

So I enjoy my locked screen display with my chosen picture because it has the time displayed nice and big and its a cool nightlight but the locked screen display/wallpaper/time with date always goes black after 13ish seconds of locking it is there no way to let the locked screen stay on while charging? because it is awesome if it could stay on as a nightlight also so i dont have to press the lock button to see what time because the normal display is ugly am I just being super picky or am I not the only one who agrees or maybe it does exist im just stupid please respond when you can also thanks for reading much appreciated.

wjosten wrote:
Again, there is NO WAY to do what you asked: display the time constantly.
I have a clock app that displays the time constantly on my iPad. I use it as a bedside clock. Many clock apps have the ability to disable autolock just within that app. Whether there is one that lets you pick your own background, I don't know but I wouldn't be surprised if there were, based on the number of clock apps out there. While what I'm suggestion is not precisely what the OP asked (display the system lock screen), it seems it might be a possible workaround.

How do I display BOTH the Time AND Date in the menu bar

When I, System Preferences > Date and Time > Clock.
I choose "show date and time in menu bar".
But I only get the Time and Day of week, but NOT the date.
I am trying to get the display to look something like this.
*12-29-07 6:34 PM*
I tried a program called 'MagiCal' that fixed this "bug" with OS 10.4, however with 10.5 'MagiCal' prevented my mail sounds from working properly (so it had to go).
Any ideas on how I can display the date and the time with 10.5.1

Try this:
http://www.nateklaiber.com/2006/02/13/os-x-add-the-date-to-the-menu-bar/

Rounding off float to 2 decimal places and returning the float

I tried doing bigdecimal but it doesnt work. :
BigDecimal bd = new BigDecimal(5 * 0.0394);
          retval = bd.floatValue();
          System.out.printf(" th %f\n",retval);
I see 0.197000. I know that there are 6 places since I didnt do %.2f. However its not the printf thats important . The float I want to return must be rounded off to two decimal places.
Thanks in advance for the help,
sb

Use BigDecimal.round( MathContext mc ), where the MathContext object is set to a precision value of 3;
BigDecimal roundedBigD = myOriginalBigD.round( new MathContext( 3 ) );� {�

Displaying operation long text in results recording screen

Hi, all!
I am trying to understand why I cannot display the operation long text when in results recording screen (either QE51N or QE01 transaction will not support displaying of operation long text).
I have checked all areas that I could think of in config to see if there is a display setting that will require to be activated and I could not find anything under Results recording, Inspection planning or General settings. I also tried to see if user settings may be making a difference and it did not. The SAP Help portal when talking of long texts available in results recording lists the following: Long texts for inspection lot, inspection method and inspection charcateristic. Nothing about operation long text.
However, the text is printed on the inspection instruction standard form.
SAP Notes has nothing on the subject that I could find.
So, as a last resort, I would like to ask if any other Quality Management specialist came across this and spent any time in determining if this can be done and why the information would not be displayed standard in the transactions. My client would prefer not to have to print the instructions in order to see the entire text. However, I do not see any standard way to have it displayed.
Any help would be greatly appreciated.
Thank you in advance!

Hi Senthil,
Don't know it will help or not. But if your MIC is qualitative then you can use the long text of catalog code in QS42.
Please refer below screen,
Click on the which help to maintain the long text.
Regards,
Sandip

Decimal places display at the time of results recording

Similar Messages

Maybe you are looking for