Decimal Places in BOM

Dear All
How can i increase decimal places of components in BOM as it is taking only three decimal but i want to add upto 6 decimal. I mean i want to add component qty as 8.785642 in BOM. so how can i enter it

Dear Ahmad,
Go to transaction CUNI, Click on unit of measurement, select ur unit of measure(ex: M/L/KG etc) for which u want to maintain 6 decimals, In decimal places field maintain 6. come back and create BOM.
test and come back
sree

Similar Messages

  • How to maintain decimal places in BOM Qty & what is the essence of base qty

    Hello PP members
    How to maintain decimal places in BOM Qty & what is the essence of base quantity in BOM ?
    Thank You

    ur first question is not understood, You can have maximum of 3 decimals in BOM item qty.
    Base qty is the qty which is refered to all the BOM items.
    example -
    Product X, base qty 1
    Raw material 1 - componen t qty= 1
    Raw material 2 - Component qty= 5
    This means To produce Product with qty1, it needs raw material 1 qty 1  and raw material 2 qty 5.
    This means To produce Product with qty10, it needs raw material 1 qty 10  and raw material 2 qty 50.
    This is the meaning of Base qty..it is the referece qty refered to all the components.
    About the decimal places
    let us say  example 2
    To produce Product with qty1, it needs raw material 1 qty 1  and raw material 2 qty .0001.
    When you enter this in SAP for the raw materialm 2 system will give error message that you  need to enter the qty with maximum 3 decimal places, hence you need to enter as below
    Product with qty10, it needs raw material 1 qty 10  and raw material 2 qty .001.
    This is how you need to adjsut the base qty and component qty with decimalplaces moer than 3,
    pl come back

  • Qty with more than 3 decimal places in BOM

    HI ALL,
    CAN I PUT QTY IN BOM WITH MORE THAN 3 DECIMAL PLACES ITS VERY URGENT REQUIREMENT.
    THANKS
    R SEHGAL

    Dear Rakesh
    I am not sure, but you can try this
    1. Define one more UOM for example 4dec then in MM02 give the conversion of 4dec to your 3 decimal, give conversion in it. for eg 10*3dec = 4 dec
    2. Now when you define bom enter quantity in 3dec(i,e, multiplying by 10) and then convert the uom in BOM to 4dec
    You can try and let us know your feedback
    Regards
    Jitesh

  • Decimal place support in BOM for R11i

    Hi, does anyone can enable higher precision upto 9 decimal place in BOM, existing only 6 decimal place support in component quantity but ct would need more. Does R11i (11.5.4) support more than 6 decimal place in BOM? if it can, how to setup.
    Thanks in advance.
    Rex

    HI Indraneel,
    Both are important. When you upload any data and create PO,So this will be important .Similarly oy04 also.It is not allowed to change this manually.This is maintained as per the country currency.
    Regards,
    Madhu.

  • Decimal Points in BOM

    Greetings...
                       How to make the setting for allowing deciaml points usage .
    Now i want to use the qty as 0.006 KG for (60 gm)  in BOM, But system giving me error as
    "Input must be in the format .__.___.__~,___V
    Edited by: SAP PP on Nov 26, 2008 6:52 AM

    Dear SAP PP,
    In standard SAP the syetm allows you to maintain only upto 3 decimal places.
    For configuring the units use T Code CUNI
    To solve your problem,refere these links and decide.
    [Decimal Places in BOM|Re: Decimal places in BOM]
    Regards
    Mangalraj.S

  • Change of the quantity field to 5 decimal places in SAP

    Hi Gurus,
    The quantity field is appearing with 3 decimal places in BOM, Process Order, etc. Is it possible to make the decimal places to 5.
    All the decimal digits from SAP are 3 digits. We have an interface through which the data flows from another legacy system (Fow system) to SAP. And the Fow system setting was 5 digits. The issue is some of the raw material requirement qty was really minor and it might be below the decimal 3 digits.
    In that case, when the data flows to SAP from Fow system it will cause the material stage failure. so please help me to investigate how to let the SAP also could have the 5 digits decimal. Thanks.
    Regards
    Brijesh

    Dear ,
    Its SAP standard ,to put and use decimal places in BOM qty .You can use upto 3 decimal places in BOM qty.
    At SE11 you need to see what measure field is linked to the quantity field.Then goto tranaction CUNI and chage the decimal places of the unit of measure for the qty field unit , it will not allow you more than 3 decimal places in case of BOM qty.
    You have following choice :
    1. With the access key make changes in the standard program and take help from ABAPer
    SAPLCSDI, Table Name-RC29P, Field Name- MENGE.
    2) Change the base quantity in BOM header to 1000 aand accordingly change the component quantity.
    Hope this is clear
    Regards
    JH

  • BOM Component quantity decimal places

    Hi... All..
    how & where to maintain settings for decimal places for component quantity in a BOM..??
    eg.,  Base unit of measure is KG n base quantity is 1KG
            component quantity is o.5KG... at present system is not accepting decimal places.... 
    waiting for reply,
    with rgrds
    L Narayana

    Hi,
    enter the no of decimal places in CUNI .
    then , in CS02 - enter the qty as 0,05 and not as 0.05 (use comma instead of fullstop and it will not throw any error) pls check.
    you can change this using this path also
    in the SAP user menu System->User profile-> Own data in the Default value tab page you can find the decimal notation
    The same topic was discussed earlier in this forum.
    How to maintain BOM quantity in decimal (i.e.0.5 kg) instead of Round valu
    Regards,
    Sheik
    Edited by: sheik abdulla on Apr 14, 2008 2:25 PM

  • BOM -ITEM QTY - SIX DECIMAL PLACES

    Dear friends,
    I want to enter item qty upto six decimal places. What are steps required.?
    Pl  help.

    Hi Sandeep
    to make the qty with 6 decimal places you can use the steps below
    the T-Code is = CUNI and
    here you can select your unit of measurement and change the units of measurement decimal places,
    you can select upto 14 decimal places if required
    pls reward points if useful
    regards
    chakri

  • Decimal Precision In BOM....

    Hi there,
                 Can any one pls enlighten me that is there any setting in SPRO (without ABAP in picture) to change the decimal precision for the qty of  item material in BOM ?
    Points will be rewarded for helpful answers....!!
    Thanks
    Kaushik

    Hi dear,
    Refer below link
    [CUNI|https://docs.google.com/document/d/1-swZ49vu38bi52dIxQ1Vcc__mjdLGj7jfVd4c5NBP2M/edit?hl=en]
    I have shown the example of chaging decimal places for the material having uom as KG.

  • Decimal unit in Bom

    dear gurus,
    when i enter quantity in BOM in decimal for eg. 0.0001 gm,system do not accept more than 3 decimal is there any setting bom itself to increase this decimal. please suggest solution,
    points will be rewarded...
    regards
    Pravin

    Hi
    The system setting is 3 decimal places only.
    In your BOM if the base qty is 1 then u need to enter 0.0001.
    change the base qty to 100 or 1000 and enter 0.01 or 0.1 insted of changing the decimal places.
    This will solve ur problem.
    This is required as u never use 0.0001 in real production.
    nanduri

  • Decimal quantity in BOM

    Dear Gurus,
    Need Urgent help. We want to use decimal quantity in BOM componenets. If base unit of measurement PC is used then system not allowing to use but if PCS is used then system allows to use decimal quantity. Please let us know other repurcussions of using decimal quantity in BOM. We are having following concerns while using PC
    1. Practically issuing material in decimal to production order is not possible.
    2. if system round off the quantity then there will be variance in planned cost & actual cost
    What could be the effect in other modules if PCS is used.
    Regards,
    SAP CONS

    In SAP R/3 all quantity fields use the domain MENG13 so even though your unit PC is not allowing any decimals it is still storing the values with 3 decimal places. If you do not mention any value in decimal rounding in transaction code CUNI (Table T006-ANDEC) it will take the rounding value as 0 decimal places. If you do not mention any value in Decimal places CUNI (T006-DECAN) it will display zero decimals. BUT internally it storing it as 1.000. In the BOM you will just see it as 1
    So as per knowledge it should not affect anything. You  can go ahead and change the PC in CUNI and set both values "Decimal places" and "Decimal pl. rounding" to 3.
    Refer to this note to get more understanding
    https://service.sap.com/sap/support/notes/931971
    Also refer to this post.
    Re: Changing Decimal Places in CUNI

  • Error while updating decimal places in general settings

    Hii All
             I have got an error while updating Decimal places in General Settings
    Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
    Note : there are no postings yet, a fresh database for a new client
             what could be the possible reason
                                                                 thanks
                                                                         RIYAZ

    Hiii All
          As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
              would be helpfull if there is any other way..
                                                Thanks
                                                         RIYAZ

  • Decimal places in report painter

    Hi experts.  I have a financial report written in report painter.  I want to show two decimal places on a single row.  The rest of the report is in whole dollars, but this one row is a percentage, so I want to show decimal places.  I know that you can format an entire column, but I can't figure out how to format a single row.  Can anyone help?
    Thanks
    Janet

    YES U CAN
    SAME AS ABOVE PROCEDURE
    BUT SELECT ROW INSTEAD OF COLUMN
    Edited by: Anil Kumar Potnuru on Feb 10, 2009 9:02 PM

  • Can not change the number of decimal places in the normalization of result

    dear all
        i want to see the proportion of some data, for example, the income of May is 300, and the total income is 1000, i need to display it like 33.33% . so i set the
    Calculate single values as normalization of result, and then it display 33.333%, i like to display only two number of decimal places, so i set the number of decimal places as 0.00, but i doesn't work, it still display three decimal numbers.
        maybe you say i can use the percentage function like %CT %GT %RT, but i need to allow external access to my query, so the i can not use those functions.
        can somebody helps me ? your advice is appreciated.

    hi,thanks for your advice, but that doesn't suit for my problem.
    before i set the normalization of result, i can change the decimal values. After that i cann't.
    In your thread, someone proposes use the T-code OY04. but this wouldn't help. As i change to other key figure, such as user quantity, when i set normalization of result, it still display 3 decimal values.
    i think the point maybe lie in the normalization of result. please advise... thanks...

  • Problems with decimal places and formatting

    Hi , we are having problems with an add on running on different localization companies. Decimal places separatd by "," differ from other localizations. We dont know if this is a SQL collation setting or somethng related to code or requirements to run add ons on different servers and languages.
    Any ideas??
    Thanks

    Hello
    Follow up with this thread:
    [Re: How to get the numeric value of DocTotal from UI API]
    Regards,
    J.

Maybe you are looking for