Decimal places in Planned order quantity
Hi Experts,
We are getting planned order(made from MRP) quantity as 43.24 KG. We dont want this. We want planned order in whole no. Like 43KG.
How to achieve this,
Regards,
Santosh
Hi Santosh,
You can create rounding profiel for PO and contract release orders, but have to chk for planned orders...chk the below link may help :
http://help.sap.com/saphelp_47x200/helpdata/en/67/c50d38c5a5c82ee10000009b38f842/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d28c844af11d182b40000e829fbfe/frameset.htm
BR,
Krishna
Similar Messages
-
Original Planned order quantity
Hi,
I want to capture the planned order quantity. Since planned order quantity is dynamic, I cant able to capture the original planned order quantity.
Eg: After running MRP, system gives a planned order 001 = 10,000 pcs.
When I convert this planned order in to partial order. Partial order quantity = 1000
Now system shows remaining planned order is 9000 pcs.
In which table system will store the original planned order quantity of 10,000 pcs. I tried in planned order table PLAF. The field total planned order quantity (GSMNG) is dynamic. It shows the current planned order quantity only.
Question:
1. Is it possible to find original planned order quantity?
2. If yes, then from which table we can see that.
Regards / USMD05 info cannot be directly read from a table in a meaningful manner unless you have setup the same to be a transparent table. So to read the info you will have to use - BAPI_MATERIAL_MRP_LIST
But I believe a better approach for your need would be to read the planned order & planned qty. from AFPO, add this to the value which you see in PLAF. This would give you the correct picture in your report, as MRP list keeps changing & you will not be able to have a reliable report if its based on MD05 data.
Provide the above spec's to your developer & the report should be easily built. -
Hi Experts,
I wanted to know if is there any way to read the planned order quantity directly in a macro ?
The scenario is that production is planned on 3 machines in production shop. When I refer to planning book, I get consolidated production of all the 3 machines (in KF Production Planned) but I want to use the production of individual machine & do some calculation in macro. Is there any BAPI / User Exit available to achieve this?
Thanks in advance
Regards
Sandeep PatilYou can use User exit macro to do this. Call BAPI_MOSRVAPS_GETLIST2 in this macro and you can get the planned order data. but this is complex developement and you need a good ABAP skill to do this.
regards -
Plan Order Quantity Table & Field
Hi
I want Plan Order quantity in z report.
Please help how I will get from system.
I required table & field name.
Regards
ARKDear Ashish,
No
This is not possible
Once the plan order is deleted you can not get in any table and
Also once the plan order is partially converted to process order then only remaining qty will be stored in PLAF table
PLAF is only table for plan orders as plan orders are not confirmed receipts
Only in initial stage when plan order is created with the quantity then it appears in PLAF
Once you start converting partially then the remaining qty gets updated in PLAF
Regards
Madhu -
Srap quantity should reduce planned order quantity
Hi Gurus,
I have a scenario here and i wanted to know if this can be technically achieved .
1.We have IDOC flowing from legacy system and it consists of both good quantities produced and scrap quantities produced .
2.Good quantity produced must be reported as a reporting point confirmation. Scrap quantity produced must be reported as reporting point scrap. Scrap quantity produced must also reduce the planned order planned order quantity.
3.Function module currently calls BAPI 'BAPI_REPMANCONF1_CREATE_MTS’ to post good Pieces Produced, can the same BAPI be used to call the scrap quantity and reduce the planned order ?
I have tried 'BAPI_PLANNEDORDER_CHANGE’ to achieve this scenario but still the planned order quantity is not getting reduced.
I want to know the feasibility to achieve this in technical or functional side .
Kindly help me to solve this problem , rewards would be generous enough for people who solve my problem.
Regards,
PKPHi Santosh,
Yes, it's true, it would simplify a lot. Unfortunately it can't be done.
These are high-end, high value and small life-cycle components and some packaging materials. Packaging materials are relatively easy to stock for one week or more but the other components should only be stocked to a minimum level.
Moreover, suppliers of high-end components do not feel the need to respect scheduled delivery dates because they "own" the market, so we can't be sure when stock will be available. The high demand for this components also adds more uncertainty because there might be only (unplanned) partial deliveries during the week as of production is available and distributed for us and other supplier's vendors.
Oh, and a production lot can really be of as low as 40 units in some cases.
Well anyway, I've tried the ATP approach but immediately run into a problem. In the morning I might be assembling a component (A) for the afternoon and I have a delivery scheduled for the morning of another component (B). I can't plan the afternoon production of a product with both components. Even being 2-3 days, in some very frequent cases we should immediately start production as soon as components arrive.
So ATP isn't very adequate even in the shortest time-frame to plan production in this scenario.
Thanks a lot for your input Santosh, it was worth a shot. Right now I can't see an option other than copy SAP_PP_009 to a new heuristic that reduces planned orders to component availability or to use a very small maximum lot size for these short production runs.
Regards,
Edgar -
Decimal places in Purchase orders
Hello,
currently, when typing in the unit price in a purchase order, we can only use 2 decimal places. We need to be able to use 4 decimal places for materials such as paper, which we buy at 0,028 (example). Can this be modified through customizing? Currently we can play around with this price and the quantity to be able to get the correct price, but this is a hassle.
Thanks in advance
DanielHi
You can maintain the price in unit for 1000 pcs.
Example: 28$ per 1000 pcs.This you can maintain in master data itself.Either in material or Info record etc.
Regards
Ramakrishna -
Increase decimal places in the PO quantity and Price
Hi All,
Can the decimal places in the PO( ME21N) creation be increased more than 3 decimal places in quantity and price?
I did changes in UOM's in CUNI, I increased the decimal places upto 14 but still it does not take more than three i-e., 0.001 maximum.
Is there any other way to handle this?
Request inputs on this.
Note 569326 - ME9F: Customized decimal places are not taken into account........ found this OSS but this correction instruction is not for our pack level ECC 6.0
Best regards,
Sridharhi
In case if you are already working in production remember that decimal places should not change. It will affect all previous data.
For your problem best solution is make order unit as 1000. So that your problem will solve
e.g. instead of 2.009 inr for 1 Unit use 2009 inr for 1000 unit. -
Ppds Planned order quantity is taken back to DP for analysis
Hi Guru,
Can any one explaine in step by step how i can release my order quantity from PPDS to DP to do my further analysis?
Please it will be really great if any one can guide me.
Thanks & Regards,
Kumar.Kumar,
Can you explain a little more what you are asking?
DP is demand planning. Here you are managing and deciding what your demand will be (predicting what you will sell is one of the more common outputs of DP)
PPDS is detailed supply planning. Here you are creating your supply elements, determining exactly how you actually intend to procure or build the product. In this plan, you have the opportunity to take into consideration capacity, execution duration, and the availability of lower level materials. In many (but not all) cases, the PPDS plan is built after the Demand plan has been turned into a final production demand forecast, and released to production for execution, prior to actually receiving the actual sales orders. In some cases, companies also may create an intermediate supply plan, which would usually be at a simpler level of detail (SNP).
Now you say you wish to 'release my order quantity from PPDS to DP' for some kind of analysis. I am not sure what this means. Supply and demand are two different things.
Companies that wish to, say, compare the demand plan to the supply plan typically don't do it in DP. Some will write custom reports, others build custom infocubes in a BW and perform their analyses there. It is definitely possible to extract supply elements (or just about any other type of data) into some kind of data structure, and place these elements into a DP planning book, if there is a business requirement. This would definitely be non-standard, and would have to be designed and built from scratch.
If you are looking for a transaction that will 'releases the order quantity from PPDS to DP', I don't believe it exists. If you wish to pull data from PPDS or SNP or ERP into DP in general, I would say you should talk to your local BW and DP experts to see what they can design for you.
Rgds,
DB49 -
Hi Experts,
for a particluar material I need the Open quantity of Planned orders for displaying in a custom report.
Please suggest from which table or by logic can i fetch this quantity .
Note: Not from any std report - i need table lable detailHi
Will this give the Open quantity of the Planned Order ( not converted ) ???
in PLAF table only existing plan orders info will be there
no productions orders
Regards
kumar -
CIF blocked .. due to planned order quantity too small
Hi,
we facing the issue of whenever planned order generated after optimizer run. if the quantity of planned order < 1 i.e 0.8pcs . It will get stuck and won't cif to R3... any solution for this ..??
thx in advanced
regardsHi
Can you please clarify the following:
1. Your Base Unit of Measure.
2. Any Min/Max Lot and rounding values maintained in ECC/APO.
3. PPM/Prod Version Lot sizes defined.
4. What is your BOM base quantity?
Also please elaborate the issue with proper examples, for us to help you better.
Regards,
Manjit
Edited by: Manjit Pahal on Aug 7, 2008 2:00 PM -
How we can increase decimal places in Sales Order for Qty
Hi,
In Sales Order qty field now its 3 decimal places for MON unit of measure but we want 4. how we can increase decimal places.
Thanks in advance
Thanks & Regards,
PMTo elaborate better.
Again, use Tcode CUNI - Unit of measurement : Initial Screen.
At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
And click on UNIT OF MEASUREMENT button.
In that you will find MON - Month.
There go for details by selecting MON or select MON and press F5 from Key board.
For MON unit maintain following parameter as per your requirement:
-Number of decimal places for number display
Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
-Base ten exponent for floating-point display
Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
And deselect commercial meas. unit in application parameters section.
I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
Thanks & Regards
JP -
Production orders in place of planned orders in MRP run
Hi,
Please help me with this senario,
we receive saleorders through CRM interface then these are chnged to redistribute to different plants by changing the plants in saleorders.
we want to run and create production orders directly for these saleorders without creating planned orders.
I tried using strategy 82 but it makes the production order online, but we want it to be created after mrp run.
Is there a way to create production orders instead to planned orders in MRP run.Hi You used Right strategy only.Use Strategy '82', Transfer requirement from CRM and execute MRP run in Background.It will generate Production order.But i didn't understand what you mean by 'Online' 3
Pl. Correct me If I am wrong.
Edited by: Velmurugan S on Mar 4, 2008 10:02 AM -
when i convert t o planeed order to purchase requistion
the quantiy shows wrongly
i checked with BOM quantiy data is correct
why it is calculated wronglyDear sir
Thank you for the solution
actually the quantity is 6,870 mm
instead of that 6.780mm
finally we found that for particular user ,they select decimal notation as x.xxx
now we changed the decimal notation as x,xxx in SU01
now problem solved -
Decimal place in Quantity field
Hello experts,
Got a query regarding decimal places in the quantity field of a sales order.
The material UOM is maintained as EA. I have checked the transaction CUNI, where the decimal place is maintained as ZERO. Still , Sales order / Delivery documents which i am creating is allowing decimal places for in the quantity.
For eg: material quantity of 50 EA in sales order, during the delivery batch splitting is getting splitted as 25.095 EA and 24.050 EA. Can you pleae advise the reason for this and how to go about this...
Thanks,
Safeer RahmanThanks for your reply....
But , as i have already told the decimal place field is maintained as 0(zero) in CUNI for the UOM EA.... Still its allowing me to enter decimal values... for eg:. its allowing me to enter 50.038 EA. I don't know why its not giving an error message prompting me not to enter decimal values...
Any idea?
Thanks,
Safeer Rahman -
Hi Gurus,
This is my problem -
51 links (Base UoM) = 2.5 feet (Sales & Production UoM)
Delivery unit = 53 links
In VA01 -> when I entered Sales order = 12 feet system automatically rounded it to 12.990 feet.
I also received a pop up showing "Item 10 rounded to 265 lk. Rounding reasons 1,2,8 -> long text"
In MD04 -> when I look at the Sales order quantity = 264.996 links.
Ran MRP and the planned order quantity = 265 links
There is a surplus inventory of ------------> 0.0004 links
Settings in CUNI: (due to business reasons - Links can NOT be in Decimals. Feet has to be in decimals)
CUNI
Decimal places
Decimal rounding
Link
0
0
Feet
3
3
Please helpThanks a lot Dave. You are the only guy who really understood my issue in the first place.
And you asked all the right questions.
Just for the sake of our discussion - I created a brand new material (material setup is same as production client). MRP settings- Proc type E, PD, EX, no rounding profiles, strategy 40, Collective.
Material master sales view
Rounding on Sales order
MD04 before MRP run
MD04 after MRP run
MD04 in Feet
Production order conversion
Please let me know if you can not see these images.
I really appreciate your help.
Sorry for the delay in reply. I was travelling.
Thanks
Maybe you are looking for
-
How can I set a different default color for hyperlinks in Pages? My company's style sheet dictates a particular color for hyperlinks; I'd like to be able to set that once rather than having to manually set the color each time.
-
External Table Authentication - Not Able to Login to Presentation services
Hi , I am trying to setup External table Authentication and in Rpd file I have setup session Variable as described in the OBIEE Server Admin Guide (http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31770.pdf -- Page 326 ) .. But when I try to
-
Headphones aren't working:(
Ever since I updated my iPad to IOS 7 none of my headphone worked does anyone have some ways for me to fix it?
-
I am getting an error message "An authentication error has occurred using your Adobe ID. (SHARED_UNKNOWN_ERROR)" when I press PUBLISH site in Muse.
-
Recording problem in Windows 7
I recently installed Audition 3.0 and its patch in my lap top running windows 7. I use the Line-In for the audio source and recorded several audio files without any problems. I tried to record some new files today and it will not do it anymore. It gi