Decimal Places in Unit of Measure

Hi,
I want to post a service entry sheet for an activity with 5 decimal values.Five decimal values is required  in order to arrive at exact value of service rendered.
I tried changing the decimal values for the particular UOM in CUNI. Still iam not able to do service entry sheet.
I require your solutions.
Thanks,
Karthik.

Hi,
Need to take help from ABAP consultant.
Change the decimals from 3- 5 also need access key for same.
Regards
Gietesh

Similar Messages

  • Decimal places in unit of measure in Sales order

    Hi,
    In the Sales Order application in PCUI, when I create a create an order for customer XYZ, and add product ABC for qty 1 which uses unit of measure PC, the qty is displayed with 3 decimals as 1,000 whereas if I use the unit of measure EA the quantity is displayed without the 3 decimals as 1. I need the unit of measure PC to not have the decimal places like in SAPGUI.
    Could anyone help me understand how this can be achieved?
    Thank you for help in advance.
    Regards,
    Priya

    To elaborate better.
    Again, use Tcode CUNI - Unit of measurement : Initial Screen.
    At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
    And click on UNIT OF MEASUREMENT button.
    In that you will find MON - Month.
    There go for details by selecting MON or select MON and press F5 from Key board.
    For MON unit maintain following parameter as per your requirement:
    -Number of decimal places for number display
    Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
    -Base ten exponent for floating-point display
    Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
    Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
    And deselect commercial meas. unit in application parameters section.
    I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
    Thanks & Regards
    JP

  • DECIMAL PLACE UN UNIT OF MEASURE

    Dear Friends
    is ther any way to maintain decimal place during alternate  unit of measure.  FOr Ex 1  bar = 23.34 Kg. without rounding 100 bar = 2334 kg. i already maintained decimal in CUNI. still not able to maintain decimal.
    Thanks and Regards
    Madhavan

    Yes you should be able to maintain this. Ensure that you allow decimals for the UOM Kg in CUNI it should allow this conversion you are referring to. You should put decimal places for both display and conversion.
    Edited by: Hemalatha Raghavendran on Jul 20, 2009 4:33 PM

  • Changing number of decimal places for Unit of Measure

    Hi All,
    I have a requirement to convert a quantity in one unit of measure to another (custom) unit of measure.
    The issue is that the custom unit of measure has 4 decimal places (customer requirement). I found function module MD_CONVERT_MATERIAL_UNIT which does the trick for regular, 3 decimal places, UoM's. It won't output 4 decimal places since the output data type is EKPO-MENGE, which has 3 decimal places.
    Does anyone have experience with trying to convert material's UoMs into 4 or more decimal places?
    Thanks!

    <b>round_f_to_15_decs</b>  round variable of type f to 15 decimals
    Sometimes type F (float) is used to represent exact data (Amounts, Quantities):
    if values are to big to be represented as Packed (> 31 decimals)
    to significally improve performance of calculations, e.g. in statistical reports
    G_DECIMAL_PLACES_GET
    REPORT Z_ROUNDING .
    DATA: float TYPE f,
          amount TYPE p DECIMALS 2,
          correctamount TYPE p DECIMALS 2,
          chars(5) TYPE c value '1.005'.
    CLASS cl_abap_math DEFINITION LOAD.
    correctamount = chars.
    WRITE: / 'Exactly:', chars,
           / 'Correct Amount:',  correctamount.
    float = chars.
    amount = float.
    skip 2.
    WRITE: / '==== Usual Processing:',
           / 'Float:', float,
           / 'Decimals 3:', float DECIMALS 3,
           / 'Decimals 2:', float DECIMALS 2,
           / 'Amount:',  amount.
    float = cl_abap_math=>round_f_to_15_decs( float ).
    amount = float.
    skip 2.
    WRITE: / '==== Correct Processing:',
           / 'Float:', float,
           / 'Decimals 3:', float DECIMALS 3,
           / 'Decimals 2:', float DECIMALS 2,
           / 'Amount:',  amount.

  • 3 decimal places for unit of measure KG

    Hi,
    I would like to create a production order. In the field total quant I would like to give the 3 decimal places of mesure KG.
    Error: "Only 2 decimal places are permitted for unit of measure KG"
    Where can I customize the system, so that 3 decimal places have been permited.
    thanks
    Desy

    thanks
    I've seen the place in Customizing where I will maintain it.
    Now I only have display authorization for class SS
    I will speak with our Basis for more authorization.
    Thanks
    Desy

  • Decimal places for unit of measure

    Dear All ,
    If i change the Decimal Places for rounding in Customizing for Unit of measure ( CUNI tcode) for KG as 6 from 3 whether it will calculate with the 6 decimal places like 0.004756 ( earlier with 3 decimal places it will calculate any multiplication with 0.004 now i want the same with 0.004756 Kg )
    whether it will work ?
    and where it will impact

    Hi
    No it will not work like that. And it depend on the transaction where you enter that. In case of Purchase order quntity field it will be always with 2 decimal places because field MENGE has 2 decimal places only. If your system is already live then it is not advisible to do such changes.
    Regards
    Antony

  • Routing - decimal places for unit of measure conversion quantity

    Hello all,
    in the change routing screen in SAP (CA02), when going to a operation detail screen, a unit of measure conversation value can be defined. A value for header and operation can be made.
    Currently we cannot set any decimal values for operations, I get the error message: "decimal places are not permitted."
    Where in customizing can I change that?
    Thanks
    Anne

    Hello,
    thanks for the answers.
    The UoM is LB.
    I've already checked CUNI, but I can not find LB..?
    Also I've noticed other places in SAP, for example the base quantity of some operations in the routing have a numbers with 3 decimal places and the same UoM LB, so this looks like the UoM is setup fine, maybe there are just problems with this special screen?
    Thanks
    Anne

  • How to allows decimal place for unit of measure of order confirmation

    Hi Guys
    we have some special cases here that need to confirm the order quantity as decimal place,is that possible made some customizing in code CO11N? or have some ways support it .....
    ex. work order A   10 EA
    - operation 1   : colse 10 EA
    - operation 2   : close 4.5 EA
    Regards/Eric

    Hi,
    You can set a UoM to allow decimals in transaction CUNI. But i fail to understand why you would want to set EA to have decimals.
    If a material is to be managed in decimals then evaluate the usage of a different UoM which allows for decimals.
    Regards,
    Vivek

  • Upto 4 decimal point for unit of measure

    hi,
    We have requirement to maintain upto 4 decimal point in PO and sales order quantity for unit of measure M3. Example PO quanity 0.3902 m3, sales order quantity 2.3212 m3,   SAP allow upto 3 decimal point, how to handle this 4 decimal point for unit of measure and any impact to do so ?
    best rgds,

    Dear Eric,
    To change decimal places of Materials follow this:
    IMG - SAP NetWeaver - General Settings - Check Units of Measurement
    select Units of Measurement & select required Unit of Measure & set decimal places.
    Hope this helps...
    Give points if useful...
    Thanks,
    Jignesh Mehta

  • Decimal Points for Unit of Measurement

    Hi all
    For doing service entry in the QTY field can we put the value upto six decimal for any unit.
    in customisation for Unit of measurement can we configure this thing putting decimal places - six or is there any other setting is required
    Please help
    Thanks in advance
    Rajesh

    Hi,
    Yes in customisation for Unit of measurement you can customize it,
    but it will be valid whenver you use this UOM in the system.
    There is one thing also you can do
    The Quantity fields decimal points in service entry is by default 3 digits ,
    so to use 1,123456  quantity for lets say price 10 $
    you can multiply both sides with 1000
    i mean
    use 1123,456 for 10000 $
    just an idea
    Regards
    Hope it helps

  • Increase in decimal places in unit of material

    Dear All,
    Please let me know the procedure for increasing the decimal places in a material unit.
    regards,
    GHS.

    Transaction CUNI. Select the UOM and click on the magnifier of function key F5. You can find the place where the decimal places are mentioned. Consider impact that may affect, before changing.

  • Decimal in routing unit of measure conversion

    Hi SAPper,
    I have an error from SAP when creating routing.
    Actual my routing consist of several operations
    Header Routing for finish good UoM = BOX
    10 Spray Drying UoM KG
    20 Press UoM BOX
    30 Firing UoM BOX
    40 Packing UoM BOX
    the problem is we must enter the conversion between UoM in operation to UoM in header routing
    100 BOX equal  3,275.59 KG
    or
    1 BOX requal  32.76 KG
    But:
    1. in routing operation UoM conversion doesn;t support decimal
    2. the space is too small for long numeric
    how can i dea with this issue.
    Kindly help
    Beest regards,
    Freddy Ha

    Hi!
    Actually you will have to define the conversion as 100 BOX = 3276 KG. This is applicable wherever we define an alternative UOM and give unit conversion factor, may it be additional data of material master or alternative unit for work center capacity. This is because it is designed like that. The UOM is stored in table as numerator and denominator without decimals. If you want you can get it modified from developer but that is not suggestible.
    Regards,
    Uday

  • Difference between Decimal places for  Quatities and Units

    Can anyone please explain the difference between the followings -
    1. Number of Decimal places for  Quantities, and
    2. Number of Decimal places for Units
    In SAP B1 2007B General Settings.

    Hi,
    The Decimal places in the general setting indicates
    Amounts:Display of row and document details
    Prices:Display for price fields in documents,item  data,price lists
    Rates:Display of decimals in currency calculation
    Quantity:Display of quantity in documents and item data
    Percent:Display used in calculation of tax amounts and discounts
    Units:Display used in units(UoM) of items.
    Also refer these note:[737880|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000737880]
    Hope this is helpful

  • How we can increase decimal places in Sales Order for Qty

    Hi,
    In Sales Order qty field now its 3 decimal places for MON unit of measure but we want 4. how we can increase decimal places.
    Thanks in advance
    Thanks & Regards,
    PM

    To elaborate better.
    Again, use Tcode CUNI - Unit of measurement : Initial Screen.
    At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
    And click on UNIT OF MEASUREMENT button.
    In that you will find MON - Month.
    There go for details by selecting MON or select MON and press F5 from Key board.
    For MON unit maintain following parameter as per your requirement:
    -Number of decimal places for number display
    Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
    -Base ten exponent for floating-point display
    Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
    Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
    And deselect commercial meas. unit in application parameters section.
    I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
    Thanks & Regards
    JP

  • CUNI Decimal place - error message

    Dear Friends,
    Is there any way we can display an error message if a user enters more than the allowed decimal place per unit.
    In CUNI we can control the display of decimals or the rounding of the decimals. Eventhough this is done the system still allows decimal places more than what is stipulated for that unit in CUNI.
    But, the requirement is that the system should not allow the user to enter decimal places more than the allowed decimal place setings in CUNI. The system should display an error message.
    Please let me know if this can be done per unit.

    Hi Lakshmipathi,
    Please find my explanation below:
    Scenario - 1
    -CUNI - BTL (Bottel) - No.Decimal place display (T006-DECAN) = "0"
    -Material - ABC - Base UoM = BTL and Sales Unit = BTL.
    -When a user creates a sales order for the third party process the system allows decimal places in quantity field (e.g.) = 1.50 BTL
    ->The system should not allow the above process.
    Scenario - 2
    -CUNI - SH (Sheets) - No.Decimal place display (T006-DECAN) = "1"
    -Material - XYZ - Base UoM = SH and Sales Unit = SH
    -When a user creates a sales order for the third party process the system allows decimal places in quantity field (e.g.) = 1.5 SH
    -> The system should not restrict the above process.
    Is there any way this can be achieved per unit of measure? If we restrict the decimal notation per user, there would be no flexiablity in the useage of units per user.

Maybe you are looking for