Decimal Places is not showing in Qty field in COPA report

Hi,
I have made a COPA report using one form that I have made it through TC:KE34.
I have used ABSMG for Sales qty in my report.
What I am observing in report, the qty is  not showing the decimal places for exmaple 6.032 MT but it gets round over to 6 MT.
I want the system should show the 3 decimal places for the Sales Qty.
How to do resolve this.
Regards
Kami

Hi Ajay,
No this is somthing new you mentioned. I havent tried to change the number format after executing the report.
Please let me know how to do that. I am using Object ALV to display the report and I am not getting any option in the menus to change the number format.
Also I noticed one thing, In other output format like drill down report its coming correctly , only in Object ALV output format its showing the rounded values.
Please let me know the path.
Regards
Kami

Similar Messages

  • Key figure, number of decimal places are not showing in report output

    Dear experts,
    At cube level PO qty value is getting 0.010 where as in bex report output of PO qty showing as 0. I have chosen decimal places as 0.000 in key figure additional properties tab. In query designer also I have chosen no of decimal places as 0.000 in display propertiesu2026please help me out. How can I get 0.010 value in report o/p.
    Thanks in advance.
    Srivalli.

    Hi,
    Try to run the query in RSRT. CHeck if you are getting the same output. Also make sure that in the reports all the filters are same as you have applied in the info -cube to see the data.
    - Jaimin

  • Decimal places are not displayed in smartforms

    Hi,
      Iam having a quantity field which has length 13 and decimals 3. While debugging it has the value has decimal places but while displaying it does not have the decimal places. Only the whole number is displayed. Can anyone help how to rectify this one.Thanks...
    Thanks,
    Rose.

    Hi,
    The format of a quatity field will be based on the associated unit of measure.  Each unit of measure will have a number of decimal places (as defined in table T006 field DECAN) defined to match how the quantity is typically recorded (e.g. ST or 'each' has no decimal places as you could never have half and each).
    Regards,
    Nick

  • Decimal place is not permitted in activity level

    Hi Experts,
    We have built a project structure with 100+wbs and 600 activities as per business requirement but we need to introduce Decimal value in POC Weight age in activity level, system is throwing error as Decimal place is not permitted, and we need system should allow to enter Decimal value while confirming also.
    These are my observations:
    The domain of the field EVGEW ( POC Weight) decimal is zero
    Note 172410 - Percentages of completion with decimal places (which is old notes)
    Please provide inputs to come out from this issue.

    Hi Guru,
    As far as i feel, there should be some logical reason as to why the system is not allowing decimal places for the POC weightage. If nothing helps, i would suggest you to raise this with SAP and seek their guidance.
    Regards,
    Gokul

  • On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Anyone got a fix?

    On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

    On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

  • ABAP query output not showing all output fields

    I added a new field group in an existing query and marked them to display in the output list. When I test the output from SQ01 -> InfoSer Query, the output is what I expect. However, if I execute the query itself, it does not show the additional fields I just created.
    I notice that in the Basic List layout design, the new fields are on a new line and not appended to the same line as the output fields before I did the modifications. I already tried to manipulate the output length and positions, but it didn't help. I turned on the ruler to drag the fields in the desired positions, sometimes it works but not for all the fields. Can someone help me please?

    I figured it out already. The maximum width for the report output is 255 only. Switching from graphical query painter, I got the error that some fields were overlapping. Then I recalculated the starting positions of the fields and adjusted their lengths. 

  • Decimal places are not permitted for asset useful life

    Dear SAP experts,
    I need to post a new net book value on a new depreciation area 50 for fixed assets. The new deprecation for depreciation area 50 will start in July 2011 on all existing (also fully depreciated or to be disposed) assets with a different useful life unlike the book deprecation for depreciation area 01. The depreciation method for depreciation area 50 is straight line.
    I have a requirement to assign the new useful life for the depreciation area 50 which may contain decimals, for example 5.5 years. Basically, I need to depreciate the asset for the remaining 6 months of 2011 and the entire 2012 to 2016.
    SAP does not allow decimals on asset useful life (Decimal places are not permitted, Message no. 00011).
    Have you come accross a similar situation? How can that be managed via depreciation methods and keys?
    Please advise.
    Thank you in advance,
    Inna

    Hi Inna,
    You can define your useful life of 5.5 years for the depreciation area 50 as follows:
    Useful life : 5
    period : 6
    here, useful life(5) represents 5 years and period(6) as 6 months which gives you 5.5 years starting depreciation from Depreciation calculation start date.
    Kind Regards,
    Mehul

  • Can not show Address of BP in XL reporter

    Hi all!
    I don't undersatnd why i can not show address of BP in XL reporter although i have already entered these information for address.
    Thanks!

    If you use the report composer to create your report:
    Drag the business partner object into the report view an then make right-click --> display more attributes and than choose the adress fields you want to display
    Hi !
    I have already used this way before i create new thread but Address is stll not showed. You can test in your Database
    I'm using SAP B1 2007A Pl42
    Thanks!

  • Decimal Places are not Permitted for Chile Country

    Hi All,
    In OVA8 settings for Chile country at the field max.doc value, i am not able to use the decimals. getting error message as Decimlas are not permitted (Message no - 00011). checked OY04 - there is no decimals for Chile currency. checked - OY01 Dec.Pt. format as 1.234.567,89
    For Argentina, Peru and Uruguay same settings has been done and i am able to save the decimal points in OVA8 at the field max.doc value.
    Please let me know if there is any specifis settings for Chile or SAP NOTE
    Thanks,
    Mahesh

    HI,
    just looking at a brand-new ECC60 / EhP4 system where nobody changed OY04 settings.
    I can find CLP (Chilean Peso) in the list with ' ' decimal places, so thats why there are no decimal places allowed.
    Check again OY04, if you find an entry for CLP and NOTHING is maintained it means that ZERO dec. places are allowed.
    If you find an entry in OY04 with a number of decimal places >0 than this decimal places are allowed.
    If there is NO entry for a given currency then its used with 2 decimal places (SAP standard).
    So OY04 is only for the currencies that should be treated different as SAP standard.
    Best regards, Christian
    Edited by: Christian Ortner on Feb 3, 2011 5:09 PM

  • Decimal Places are not permitted

    Hello,
            The Vendor Invoice amount in Rs 25920.72 and the currency is INR, When i am entering in T.code FB60 i am getting an error "Decimal Places not permiited". i made changes in T.code SU01 (Maintained User) and T.code OY01 (Defining Countries in SAP Systems) respectively but still getting the same error as "Decimal Places not permitted". After that i checked in T.code OY04 (Set Decimal Places for Currencies) and there Currency INR is reflected and "no decimal places"  field is assigned to it. What should be done. Please Help!
    Regards
    Ashwin

    Yes. you are right, once done the transaction for INR
    Your are not suppose the change decimal settings.
    So it will effect old transaction.
    Please check the note mentioned. below. Hope it helps.
    Note 172410 - Percentages of completion with decimal places
    regards
    vamsi

  • How we can increase decimal places in Sales Order for Qty

    Hi,
    In Sales Order qty field now its 3 decimal places for MON unit of measure but we want 4. how we can increase decimal places.
    Thanks in advance
    Thanks & Regards,
    PM

    To elaborate better.
    Again, use Tcode CUNI - Unit of measurement : Initial Screen.
    At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
    And click on UNIT OF MEASUREMENT button.
    In that you will find MON - Month.
    There go for details by selecting MON or select MON and press F5 from Key board.
    For MON unit maintain following parameter as per your requirement:
    -Number of decimal places for number display
    Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
    -Base ten exponent for floating-point display
    Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
    Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
    And deselect commercial meas. unit in application parameters section.
    I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
    Thanks & Regards
    JP

  • Adobe Acrobat Version 9.0 & X are not showing "Clear Signature Field" with Custom e-sign plug-in

    Hi...
    We have created Custom PDF signature plug-in using Adobe X SDK.
    Earlier we had the same Custom PDF signature plug-in with Adobe 7.0 SDK and it used to show "Clear Signature Field" in context menu of digital signature placed on PDF.
    After upgrading the Custom signature plug-in to Adobe X SDK (complied again with SDK X, earlier it used to be 5.0 SDK) to support Acrobat 9, X and XI for digital signature, the "Clear Signature Field" option is appearing in context menu of digital signature box. Even the "Clear Signature Field" option is not shown for the user who has signed the document.
    "Clear Signature" option is available for Adobe Default Security signature.
    We have not changed anything in our plug-in code apart from recompiling it with Adobe X SDK.
    This is a critical issue for us.
    Here is the screen-shot from signed PDF having Adobe Default signature as well as our Custom plug-in signature.
    Here it clearly shows that "Clear Signature" option is not present in signature placed by Custom plug-in.
    Please let us know if anyone else has faced this type of issue earlier and has a resolution.
    Thanks In Advance...
    Waseem

    I am still not getting the Clear signature option for the user who has signed the PDF using Custom PDF Signature plug-in but the same is available for Acrobat Default security signature.
    Custom plug-in is compliled with Adobe X SDK and we have not made any code change to hide the Clear Signature option.
    I found a related posts where Clear Signature option is not shown:
    http://forums.adobe.com/message/5092195

  • Refresh of a Report Builder Dataset does NOT show newly added field

    I'm working with Report Builder 2.0 (we don't plan on getting SQL 2008 R2 - so NO 3.0 for us!) and have found that if I have an existing report using an existing stored procedure (it has 4 existing parameters) and I add a new field to the stored procedure
    it will not refresh the
    data set.  I have gone to the DataSet properties and executed the query(SPROC) where it does show the new field (so I know the sproc will
    execute), but when I click OK and hit Refresh Fields it stops responding.  I also tried the same steps without the Refresh Fields and still stops responding.  I also tried to add the field name and it errored out as invalid.
    The only work around I've found is to
    create a new dataset referencing the updated SPROC with a different name, deleting the old dataset and then re-naming the newer dataset with the old
    one's name so all the field references are the same.  I do know that in the case of renaming
    a field in a sproc that this would end BADLY because there is no way any of the old field's references would work.  
    But it seems odd I have to go through so much to refresh for new fields, so perhaps I'm missing a step in dealing with this situation.  Any recommendations would be appreciated.

    Hi CinBH,
    I understand that the Report Builder 2.0 hangs while flush the dataset by executing the query. In that case, I think it is necessary to capture a user dump when the problem occurred. And then, you can send the dump to Microsoft CSS support. Support Professionals
    from Microsoft will assist you to solve the problem.
    I am providing the steps below for you to gather the hang dump or crash dump to further work on this issue,
    Hang dump,
    a. Open Report Builder as usual, and wait for a while.
    b. When you found that the Report Builder application hang, and was not responding, please open TaskManager by one of follws,
    - Pressing “Ctrl + Alt + Del” button and then click “Start Task Manager” item.
    - Or right-clicking your task bar, click “Start Task Manager”menu.
    c. Once the Task Manager opened, switch to Process tab, find the “Report Builder” process MSReportBuilder.exe.
    d. Right-click the item, click Create dump file.
    e. After that, it will prompt a window and let you know the location of the dump file.
    You can copy the hang dump or crash dump file to your development machine configured with symbols files, and open it in Visual Studio 2008. Next, you can analyze the error / exception, and call stacks to see why the error happens.
    Thanks,
    Eileen

  • ESS US ADDRESS IVIEW NOT SHOWING ALL OVERVIEW FIELDS

    NW2004s , EP 7 , MYSAPERP 5.0, ECC 6.0
    ESS ADDRESS IVIEW - ( UNDER PERSONNEL INFORMATION ) -
    The IView is not showing up few key fields in the Overview Part
    for instance - Name, C/O , State , Zip code fields are missing from the overview part, but when i go to Edit part these field show up ( having data in them ).
    The personalization option shows NO UI Element listed ( in the Overview - Transparent container ) in both Displayed and Hidden Column ( Yet few fields are showing up  - Street Address , Telephone without area code )
    I deleted all the personalizations from the iview and the corressponding page ( By reseting it - as advised by a fellow SDN'er ) , but it didn't fixed the issue.
    Backend is correctly configured and webdynpro code has the fields listed as well.
    There isn't any SAP Note on this, as well.

    what SP level ar eyou on. If you are not on EHP2 or EHP3 ( that is ESS 1.3), the fields on the overview overview are hard coded ( UI elements generated on runtime not during design time) and hence you will not be able to use personalization. You will have to add fields in wdDoModify method of the overview screen.
    I remember replying with a code of how to do this. Probably you may find it with a search on ESS forum

  • Place Cursor not showing the (#) number of text files loaded

    Hi all,
    I´m using Indesign CS3, updated to the latest patch availabe, this is 5.0.4. I´m using Windows 7 32b.
    When trying to import text files via File > Place and I select 2 o more text files and click OK, the Place Cursor should show in parenthesis the number of files loaded right?. Well the bizarre issue I´m dealing with is that this (#) doesn´t show up. I can see the little preview of the text to be imported but not the (#) number of text files loaded. If I press the down arrow key on the keyboard the mini text updates and cicles through all the loaded texts. That's fine.
    I wanted to screen capture this issue so I installed Techsmith Snagit 9 on my computer. When I was ready to capture the Place Cursor on Indesign, Snag it captured it showing (2) documents loaded. ???? What´s going on?
    Anyone could explain this issue?
    I´ve already rebuild my Preferences with no luck.
    What I see in Indesign http://img214.imageshack.us/img214/1774/whatiseeinindesign.jpg
    What I see after the screen capture with Snag it 9 http://img299.imageshack.us/img299/6001/screencaptureinsnagit.jpg
    Thanks for your help.
    Francesc.

    I use jdk1.5 on Xp. Ok, I'll check it again

Maybe you are looking for