Decimal Quantity in ME84 release

Hello All,
When releasing SA delivery schedules (ME84) whose date falls within current week and in
the past, the quantity decimal is not transmitted through DELFOR (e.g if sending 10.4 its transmitted as 10 only), for the future date its working fine.
please guide whether it is standard behaviour or I am missing something
Thank you

Hi Zhang,
repeating my question
E.g I am releasing Delivery schedules to vendor through Idoc DELFOR (aggregating as per calendar attached) if the date is <= Today's date, it is transmitting without decimal and if the date is > today's date the quantity is transmitted with exact decimal values.
If the Decimal pl. rounding is zero then its should behave same for all schedule lines
Regards

Similar Messages

Order quantity in purchase order has to be ordered in Decimal quantity.(MM)

Hi All,
       I need your help.I am trying to enter the order quantity in decimal quantity in purchase order(ME21) and i am getting a system error "enter numeric value".
    I checked the customisation setting in, Global settings-Unit of measure.Here i found that the field "decimal places" is given value "2".
     Please guide me if there is any other stting apart from this to make the order in decimal quantity.
Eg;I need to order in 1.76 M (meter)

Hi sunil
At the same place in global settings- unit of measure Try "Decimal pl. round" as 2 and then try to make po.
Regards
Mahesh
Message was edited by: mahesh kore

Decimal Quantity Orders

Hi All,
On our website ,our cusmtores are able to order in Decimals(ex:8.3) .
they should not order in decimals, how can i resolve this issue.
Any suggestions please.
Thanks,
Sabitha

When adding an item or updating quantity in the Oracle iStore shopping cart, the customer can enter a decimal quantity if the item is divisible. Oracle iStore calls the same API used by Oracle Order Management for validating quantity. If an item is marked OM Indivisible, decimal quantities are not allowed for its primary unit of measure (UOM).
To prevent the customer from selecting a decimal quantity of an item, log into Oracle Forms with Inventory responsibility for the master inventory organization, and mark the OM Indivisible flag. See the Oracle Inventory User's Guide for more information.
Please let me know if this does not resolve your issue.

Decimal quantity in BOM

Dear Gurus,
Need Urgent help. We want to use decimal quantity in BOM componenets. If base unit of measurement PC is used then system not allowing to use but if PCS is used then system allows to use decimal quantity. Please let us know other repurcussions of using decimal quantity in BOM. We are having following concerns while using PC
1. Practically issuing material in decimal to production order is not possible.
2. if system round off the quantity then there will be variance in planned cost & actual cost
What could be the effect in other modules if PCS is used.
Regards,
SAP CONS

In SAP R/3 all quantity fields use the domain MENG13 so even though your unit PC is not allowing any decimals it is still storing the values with 3 decimal places. If you do not mention any value in decimal rounding in transaction code CUNI (Table T006-ANDEC) it will take the rounding value as 0 decimal places. If you do not mention any value in Decimal places CUNI (T006-DECAN) it will display zero decimals. BUT internally it storing it as 1.000. In the BOM you will just see it as 1
So as per knowledge it should not affect anything. You can go ahead and change the PC in CUNI and set both values "Decimal places" and "Decimal pl. rounding" to 3.
Refer to this note to get more understanding
https://service.sap.com/sap/support/notes/931971
Also refer to this post.
Re: Changing Decimal Places in CUNI

Decimal Quantity Receiving in Serial Control Item

HI ALL,
Can anyone explain, how can i receive decimal quantity in case of serial control item ? I want to receive quantity in decimal while system is showing error.
Plz provide any solution or workaround of the issue.
Regards,
Fahd

Decimal quantity for a serialized item is unusual.
You should put the item on lot control.
Sandeep Gandhi
Independent Techno-functional Consultant
Omkar Technologies Inc
513-325-9026

Can not put decimal quantity in BOM quantity

Hi all,
while go to put decimal quantity in BOM quantity, sytem is not allowing me. It is only allowing me to put only integer number.
with regards,
partha

Partha,
Is it an error or warning message. Like Suhas said it might be due to User settings. Change the format for numbers to decimal (middle one) in User settings.
IF it is a warning message it may be that the UOm does not support decimals as per customizing. Check in CUNI.
Regards
Ram

PR quantity change after Release

Hi Friends,
I am unable to change PR Quantity after release of PR. Please suggest..
Regards,

hi,
When you set up the release strategy there is an indicator for the changability, which states that whether you wanna make the further changes in the PR doc, once it is released...
So, if you wanna allow the changability for the PR docs, then you can use the any of the indicator among 4, 5 , 6 as per your req....
by this you shd be able to make changes...
Regards
Priyanka.P

GR blocked Quantity and corresponding released quantity

Hi,
I want to find out GR blocked Quantity and corresponding GR released quantity (103 & its 105), kindly let me know the table link to get these data.
Thanks,
Kaleel

Hi
In table MSEG, field MBLNR will have 105 GR ref and field LFBNR will have corresponding 103 GR ref.
With regards,
Jeeva

ME84- Release documents for SA not transmitted

Dear Experts,
After creating release documents in ME84 for a Scheduling agreement, release out put is not trasmitted.
Kinldy let me know what could be the reason for this and where can I correct this.
In header---> Messages, I can see an output type LPH1 with yessow indicator on
Thanks in advance
Regards,
Shashidhar
Edited by: Shashidhar Shetty on Jan 5, 2011 11:49 AM

Hi,
What's the SA Type that was created via MRP.
If it's LP (without release document), release will not do anything BUT
If it's LPA (release document), then you will not be able to Post the GR until release is affected.
Thanks.
Scheduling Agreement can be categories as
1) LP (without release document) and
2) LPA (with release document)
If use LP, you can do GR without release but with LPA, you need to release the schedule line via ME38.
Thanks.
NanoSAP
Posts: 58
Registered: 1/5/09
Forum Points: 6
   Re: release strategy for Scheduling Agreement(SA)
Posted: Jun 26, 2009 8:32 AM    in response to: sathish.kumar           Reply
Dear Mr.Satish,
Thanks a lot for your earliest reply...But my point is i want the system should not allow to make delivery schedule if release is not affected...Though schedule lines are generating through MRP run...Is is possible,by any chance...??

Release Procedure for Quantity Contract

Dear All,
We have a business requirement to ensure that Quantity Contracts are released by the Account Receivable Accountant before the Sales Support Staff can create Sales Orders against them.
Process : Create Quantity Contract (VA41) -> Release Contract (VKM3)->Create Sales Order (VA01)
Currently, users can create sales order against the quantity contract before the contract has been released.
I need guidance on how to implement system control to prevent this creation of Sales Orders before Quantity Contracts are released..
How can i configure release procedure for quantity contract?
Any assistance will be appreciated.
Many Thanks

Hi
There is a concept of User Status / Status Management in SAP. By using this you can set status as default that is Blocked, and then the authorised person can release the document, only after that a person can create an Order, with reference to that Contract.
The Customisation setting is in :- IMG> sales and Distribution>Sales > Sales Document>Define and assign User Profile(T Code is BS02)
To know more about this you can search the Forum, also check the below given Link:-
[http://web.mit.edu/sapbiz/docs/Explanation%20of%20Status%20Management%20functionality%20v3.doc]
[http://help.sap.com/saphelp_crm40/helpdata/en/73/29943a7acb9023e10000000a114084/content.htm]
Hope this will help you.
Regards
Amitesh Anand

PR Release date in TAB Quantity/Dates

Hi Experts ,
When i am creating a PR then In the TAB>Quantity/Dates the release date is coming same as the delivery date .
As per my opinion it by default should be same as the PR requested date .and when it release by( me54 or me55) .then it will update as the dated on which we are releasing the PR.
Please Suggest
Varun Bisaria

Hi Varun,
The field 'release date' is a bit confusing. It has nothing to do with
the date you perform the release strategy (transaction ME54 or ME55).
The help on the field tells you more about it.
The release date does not mean PR release approval date.
In PR table/EBAN-FRGKZ or ME53 screen you can find the 'release date',
then press F1 -> purchase requisition release date which means for the
material to be available on the date it is needed the PR must be release
on xx.xx.xx (date) (that's requirement date less GR proessing time, GR
proessing time, planned delivery time, and purchasing department
processing time).
In ME53 screen -> item detail -> MRP data block (include release date.)
click 'statistics' icon -> administrative data (include release ind. and
rel. strategy).
In ME5A -> press F1 on 'release date' of initial screen which have same
explain for this field.
There is no actual PR release date field in EBAN, so in PR display,
we can not see "actual PR release date".
BR
Nadia Orlandi

Set No Decimal Point for Quantity in Any Stock Movement.

Hi experts,
Can anybody tell me how to block user from entering qty with decimal point in any stock movement that they plan to do. Our current system setting allowed user to do goods issue with decimal quantity such as 1.25 Unit.
Regards.

Hi Sujiana,
If you dont want to decimals i think one option is availble is it correct or i dont know.why dont you try onece for this
Go to logistics general ->Quantity optimizing and allowed logistics units of mesure->unit of measure rounding rule
do here round to your unit
i think it may be helpful to you
Prem

Decimal on quantity for GI and BOM

Dear Respected Gurus,
can any one tell me how to allow decimal quantity for inventory transactions and BOM.
Like GR, 12.20
Like GI, 12.20
Like BOM, 12.20.
Regards,
qsm sap

Hi,
Please try by allowing the decimal values for the Unit of measure.
Thx
Raju

MRP create more Schedule Lines than target quantity

We already follow the OSS note 83343, we create a Schedule agreeement and validity date is the same as the Source List and Quota arrangement, also the Target Quanity is the same in the quota arrangement in the maximun quantity and Maximun release qty fields.
After maintaining that data, we run the MRP as follow:
Processing key          NETCH               Net change for total horizon
Create purchase req.    2                   Purchase requisitions in opening period
Delivery schedules      3                   Schedule lines
Create MRP list         1                   MRP list
Planning mode           1                   Adapt planning data (normal mode)
Scheduling              1                   Basic dates will be determined for plann
After that, still in teh schedule agreement was created more schedule lines that the quantoty is bigger that the target quantity in the sched Agreement.
What else we miss??

Thanks for your not help.
That I can investigate is the quota arrenagement is incorrect but for some reason the QA is not working.

Purchasing document 13000040 not subject to release strategy

Dear all
iam create Po
30 or 30+ qty it is showing Release code but less-then 30 qty its showing bellow error
how rectify this error
Purchasing document 13000040 not subject to release strategy

HI
you are creating two thread for same requirement
check your following thread
[how to set Release indicator ,ofter quantity change PO release cancel;
as qty change your value will get change in PO
as you are changing qty now try following
keep qty less than 30 and change price increase it you will get Po for release,means your release procedure set for value of PO
Regards
Kailas Ugale

Decimal Quantity in ME84 release

Similar Messages

Maybe you are looking for