Decimal tab as a template in a letter

How can a make a decimal tab in a letter?
When a make a decimal tab, the next time when want to use it at another place in the letter, the tab point (in the ruler above) has disapeared.
Very frustrating.
Greetings,
Menno

And once you have the tabs set where you'd like, save it as a new style that you can easily apply to other paragraphs. You can import style from other documents & templates so you don't have to recreate them all of the time.

Similar Messages

  • Grouping and Decimal characters in rtf templates.

    Hi guys and girls,
    I’m really struggling with a problem here regarding the decimal characters for the prices in my output.
    I'm using XML Publisher 5.6.3.
    My goal is to control the grouping and decimal character from my template.
    The numbers in the XML data file can either be 10.000,00 or 10,000.00. The format is handled by the users nls_numeric_characters profile option.
    The output of the template shall be based on the locale and not the data generated by Oracle Reports. For example: Reports to US customers shall show the numbers in the following format 10,000.00. Reports to our European customers shall show the numbers in this format 10.000,00.
    How can I achieve this in my templates? Can it be achieved at all?
    Thank you in advance.
    Kenneth Kristoffersen
    Edited by: Kenneth_ on May 19, 2009 1:30 AM

    Hi,
    Thank you for your reply.
    The problem is that the report is generating the output based on the users profile option nls_numeric_characters.
    I have tried to override the users profile option in the before report trigger without any luck. I can alter selects so the query gets the numbers in the right format but then I would have to go through all queryes and reports which seem a bit wrong? Especially for the standard Oracle reports.
    BR Kenneth

  • Termination error when accessing resource tab in project template

    Hi,
    i am getting error when i am trying do resource in the project template. i have structured the project structure in the template. and i am trying to add roles for the project template but it is showing termination error when i click on "resource tab" in the template. 
    anybody can help on this error?
    thanks,
    Prabu
    i have serached for notes but it didnt help.
    fyi,  below are the error message i am getting,
    Error while processing your query
    What has happened?
    The URL call http://cmcw08v701.us.fit:8000/sap/bc/webdynpro/sap/CPROJECTS_FPM was terminated because of an error.
    Note
    The following error occurred in system CMD : Line types of an internal table and a work area not compatible.
    The error occurred on application server cmcw08v701_CMD_00 and in work process 8 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: RETRIEVE of program CL_DPR_API_APPLICATION_OBJECT=CP
    Method: IF_DPR_PROVIDER_ACCESS~RETRIEVE of program CL_DPR_API_APPLICATION_OBJECT=CP
    Method: RETRIEVE of program CL_DPR_API_BUSINESS_OBJECT====CP
    Method: IF_DPR_PROVIDER_ACCESS~RETRIEVE of program CL_DPR_API_BUSINESS_OBJECT====CP
    Method: IF_DPR_CORE_SERVICE_PROVIDER~RETRIEVE of program CL_DPR_API_CPROJECTS_CSP======CP
    Method: IF_DPR_CORE_SERVICE_ACCESSOR~RETRIEVE of program CL_DPR_API_CORE_SERVICE_MNGR==CP
    Method: HANDLEDEFAULT of program /1BCWDY/0O2TQEJ08RJE3X97BQID==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0O2TQEJ08RJE3X97BQID==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
    What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system CMD in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server cmcw08v701_CMD_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. cmcw08v701_CMD_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 120 -u: PTHANGARAJ -l: E -s: CMD -i: cmcw08v701_CMD_00 -w: 8 -d: 20110918 -t: 002509 -v: RABAX_STATE -e: OBJECTS_WA_NOT_COMPATIBLE -X: 005056B8017E1ED0B8B7AF786703B697_005056B8017E1ED0B8B7AF77EFCBF697_1 -x: 7BBDE1E038C3F1239697005056B8017E
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Line types of an internal table and a work area not compatible

    Hi Prabu,
    Just do a quick check if there is any custom implementation in Project management side. This may occur most probably due to not defining the navigations properly or if any modifications in the Define Navigation part of SPRO. Raising a ticket to your BASIS team might help some time to resolve this. Last option is OSS notes.
    Regards,
    Karthik

  • Pages 2.0 for iOS 7/ 5.0 for Mac - decimal tab separator

    The function "decimal tab" works fine with the separator "." but not with the separator "," - used in Europe (except UK) and in other countries.
    I've sent a bug report to Apple.

    p12d24r55,
    maybe you should send this crash log to Apple (if you haven't done so).
    I fear, I cannot help you any further.

  • Template for testimonial letter to going through SAP exam

    Hi,
    I wonder if you all might be able to share template for testimonial letter required by SAP about previous projects, so I can attend their exam without attending their course.
    Thanks in advance guys.
    Best Regards,
    Tony

    Hello,
    Please contact your local SAP Education Team. They should be able to provide you template in which they want the details.
    Regards,
    Ravi

  • Multiple queries / tabs in Web Template

    Hi all, I'm trying to find a few people I can share experience with regarding Web Templates with multiple tabs / dataproviders (ie queries, usually)
    Two particular issues at the moment:
    I'm having regular Internal Server Error when I have select the second tab and then click Refresh Variables (command Open_Variable_Dialogue, which doesn't link to a specific DataProvider). Has anyone come across this?
    Also, has anyone worked out a way of only having 1 of each of Filter, Navigate, Export and Print buttons/links? Because these are specific to a DataProvider it seems I have to have a different button for each tab, which is clumsy with 2 queries and unacceptable for more than 2.
    I'm not a Java programmer - any thoughts on whether Java programming skills are more or less essential to a BW Web development project?
    But wider than these specifics, I'm keen to get some discussion going on this... I know many companies use multi-query web templates, so why the lack of discussion?
    Hope to hear back soon, points awarded where deserved.
    Patrick

    Hi Patrick,
                     i worked in the webtemplate with multiple quiries.
    you are trying to create the webtemplate with multiple quiries. can brief your requirement, so that i can help you out.
    do you want to use multiple quiries in template. do you want you use the variable screen before opning the webtemplate. you can use the dropdown box, filter in the webtemplate. By using the dropdown or filter panel you can control multiple quiries in the template. by using the one dropdown box, print button, you control all the quiries in the template.
    if you have any quiries please let me know.
    regards
    amith

  • Using Calculate tab in a field.  Not letting me choose fields to use.

    I am trying to make one field calculate a few other fields into a sum.  But in the Calculate tab it seems I can pick all of the fields on the sheet or none at all.  It's not letting me pick and choose.  What am I doing wrong?

    Nothing. It's a bug in Acrobat. When you select a single field use the
    space-bar to select/un-select it, or click a bit off to the center of the
    check-box next to its name.

  • Problem with Cross-tab report (RTF Template) null values, current-group()

    Hi, experts!
    I generate Cross-tab report using RTF Tamlpate and I have problem with grouping.
    My XML file have to be with one group only because I want to using dynamic regrouping inside the RTF template.
    Here is my data structure (XML file):(Look the images for details)
    http://img156.imageshack.us/img156/3997/xmlstructureay9.jpg
    =======================
    WITH GROUPS
    =======================
    Here is my RTF template:
    http://img151.imageshack.us/img151/2951/resultcrosstabbycustomehf8.jpg
    When I'm using grouping and I want to have for each group cross-tab report I have the following problem: (Look the images for details)
    http://img156.imageshack.us/img156/8786/resultcrosstabbycustomect9.jpg
    And this is my code I'm using inside the RTF template with groups:(Look the images for details)
    http://img156.imageshack.us/img156/4253/fieldbrowserxb7.jpg
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    =======================
    WITHOUT GROUPS
    =======================
    Here is my RTF template:
    http://img151.imageshack.us/img151/9545/resultcrosstabwithoutgrzg7.jpg
    When I generate one cross-tab there is no problem: (Look the images for details)
    http://img156.imageshack.us/img156/7030/resultcrosstabwithoutgrsr1.jpg
    This is my code I'm using inside the RTF template WITHOUT groups:(Look the images for details)
    http://img151.imageshack.us/img151/7030/fieldbrowserwithoutgrours8.jpg
    Can someone give me a hand to deal with this?
    Thank you!

    Pitson,
    better to ask this question in the BI Publisher Forum than here in the Oracle Reports Forum:
    BI Publisher
    Regards
    Rainer

  • Problem with Cross-tab report (RTF Template)

    Hi, experts!
    I generate Cross-tab report using RTF Tamlpate and I have problem with grouping.
    My XML file have to be with one group only because I want to using dynamic regrouping inside the RTF template.
    Here is my data structure (XML file):(Look the images for details)
    http://img156.imageshack.us/img156/3997/xmlstructureay9.jpg
    =======================
    WITH GROUPS
    =======================
    Here is my RTF template:
    http://img151.imageshack.us/img151/2951/resultcrosstabbycustomehf8.jpg
    When I'm using grouping and I want to have for each group cross-tab report I have the following problem: (Look the images for details)
    http://img156.imageshack.us/img156/8786/resultcrosstabbycustomect9.jpg
    And this is my code I'm using inside the RTF template with groups:(Look the images for details)
    http://img156.imageshack.us/img156/4253/fieldbrowserxb7.jpg
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    =======================
    WITHOUT GROUPS
    =======================
    Here is my RTF template:
    http://img151.imageshack.us/img151/9545/resultcrosstabwithoutgrzg7.jpg
    When I generate one cross-tab there is no problem: (Look the images for details)
    http://img156.imageshack.us/img156/7030/resultcrosstabwithoutgrsr1.jpg
    This is my code I'm using inside the RTF template WITHOUT groups:(Look the images for details)
    http://img151.imageshack.us/img151/7030/fieldbrowserwithoutgrours8.jpg
    Can someone give me a hand to deal with this?
    Thank you!

    Pitson,
    better to ask this question in the BI Publisher Forum than here in the Oracle Reports Forum:
    BI Publisher
    Regards
    Rainer

  • How can I use a right,  left or decimal tab in a table?

    As soon as I set up a left, right, center or decimal key and then hit the tab key in order to position a number, the cell highlight switches to the next cell and the number does not move to the position desired. I can set a left, right or center position, of course, but I want to have more control over the number's position in the cell. Any ideas? Thank you, Lou

    I realise now that once you type numeric data in the cell (aligned with your tab), as soon as you leave the cell, Pages decides what kind of data you have typed and makes its own mind up about how to align it. Your best bet (and mine, since I have been struggling with this behaviour) is to use the Cell Formatting options in the Inspector, and format the data as Currency or Number, with 2 decimal places. Add the Accounting Style tick box and you get the Currency symbol at the far left of the cell and the number at the far right. By resizing the width of the cell you get pretty much the effect you want.
    There is also an additional alignment option on the formatting bar at the top when you are in a cell which does 'Auto align table cell based on content'. That might be useful sometimes, too.

  • Custom Tab Missing in Template Section

    Hello -
    I recently migrated to SharePoint 2013.    Under Site Settings > Web Design Galleries > Solutions, I can see that my site templates carried over.   They have been activated.    However, when I go to create a
    new subsite, I noticed that the Custom tab is missing.    Any suggestions on how I can retrieve that?    

    I was able to modify the manifest.xml file, and repackaged the .cab using IZarc.   I renamed it to a wsp and uploaded to the site Solutions and was able to then click the Upgrade button.   it's activated, but there still isn't a Custom
    tab.    When I recreated the template in 2013, I was able to see the Custom tab.   
    I guess there isn't a real easy way to migrate 2010 site templates to 2013.
    Here they mention to recreate using 2013, but I wonder what companies that have hundreds of custom site templates would do it their case?
    http://technet.microsoft.com/en-us/library/jj219648.aspx
    Q: I receive an error that I cannot create a subsite based on a site template because the site template uses the 2010 experience version and my site collection is in the 2013 experience version
    A: Recreate the site template in the 2013 experience.
    To recreate the site template, create a new subsite based on the 2013 experience, customize it again to match the template that you had, and then save the customized subsite as a template (on the
    Site Settings page, click Save site as template).

  • [Dynamic Tabs UI Shell Template] Access AM from main page

    Hi
    I am using JDeveloper 11.1.2.1
    I have a doubt about UI Shell Template. I'm using this template and this user data map implementation to store user preferences:
       http://andrejusb.blogspot.com.es/2012/05/solution-for-sharing-global-user-data.html
    I use this solution because I need to share the user language in the view layer and the BC layer (some viewObjects depend of language)
    I have a use case where I need to change the user data map from a managed bean (the user changes your favorite language from UI). Because I use the UI Shell template with several BTF in ADF libraries I don't know how can I access the application modules of these BTFs or the DataControls from the managed bean in the main project that contain the home page based on the UI Shell Template.
    Any suggestion will be appreciated.
    Thank you

    Hi User,
    you need to look for customizing the UI shell template.
    here are few articles may help you to customize the default UI shell template.
    Techie gossip: ADF talk: customize the logo inside Dynamic Tab UI Shell
    Andrejus Baranovskis's Blog: Building Custom UI Shell with ADF 11g R2

  • Using Tab Pages & Web Template Web Items

    Hi Experts,
    i want to build a report with a tabs
    i have created a WAD report with a tab page web item
    in the tab page i have inserted three web template web items
    and in each web item i have entered a diffrent technical name of a WAD report (3 reports)
    but when i run the report i get in all three tab pages
    the data of the first report (like it uses DP_1 of the first one)
    i have tried to change in the reports the name of the data providers
    to DP_7 or whatever and it is not working still.
    any one know how to display three WAD reports in a tab page web item?
    Thanks and BR,
    Or.

    Hi
    for  one clair example you can install the 0Analyzer web template - the standard sap web template that use TABs with different reports inside
    hope it helps
    Edited by: Andrea Previati on Sep 28, 2011 5:53 PM

  • Oracle dynamic tab ui shell template : the rest of page missing

    im new in adf
    hi;
    im using oracle dynamic tab shell which i download it from oracle site.
    my problem is
    i have a page fragment ( two.jsff) and i drag and drop from data controls vo as adf amaster table ,detail table
    when i run the application first.jspx and click the fisrt link the page show me only the fist table , i can not see the second table Unless change the the zoom level in the internet explorer( to make application appearance smaller)
    how to solve this problem.
    i drag and drop vo directly to the panelGroupLayout , should i use panelstretch?
    - some one told me the problem in computer screen resolution ( he say when your create an application ( jdeveloper ) with high screen resolution then take it to other computer and edite the page you will face this problem) is it true.
    thanks

    Hi User,
    you need to look for customizing the UI shell template.
    here are few articles may help you to customize the default UI shell template.
    Techie gossip: ADF talk: customize the logo inside Dynamic Tab UI Shell
    Andrejus Baranovskis's Blog: Building Custom UI Shell with ADF 11g R2

  • Highlight a list (TABBED NAVIGATION LIST TEMPLATE)

    Hi everyone,
    I have created a list with template (TABBED NAVIGATION LIST 2) in my application.But its not highlighting the tab(as the list template is tabbed navigation) what i seleted.How can i highlight that selected list.Could anyone please help me to solve this.
    Theme: Business Look
    Thanks
    phani

    Could anyone help me how to change the template of that list (TABBED NAVIGATION LIST) to make it highlight the selected list.
    Thanks
    phani

Maybe you are looking for

  • Crashes every time I try to download folders

    I have the CS5 Master Collection I'm using a 2.8GHz Intel Core i7 iMac with 16GB DDR3. Mac OSX 10.6.4 I've created a WordPress site. I can upload to it. And I can download single files. But when I try to download folders, Dreamweaver CS5 crashes. Las

  • I need help regarding moving my music from pc to PalmPre+ and my amazon account. . .

    Recently I had to have my Palm Pre+ replaced w/warranty. I'd backed up my stuff onto my pc. When I tried to drag & drop my music to my replacement palm, instead of it saying, 'copy to music', like it usually says, it had a circle with a line through

  • Is there a way to restrict who can connect/find a HP MFP attached to a router.

    We have  a HP MFP connected to a local network router.  I'd like to restrict access to who can print to it.  The printer is connected via ethernet.  Anyone who has access to our network (wired or wirless) can find/connect to the printer.  We only wan

  • Installing Windows 7 on a B540

    Hello, I purchased a new B540 All-in-one from Best Buy and had the Geek Squad downgrade the operating system to Windows 7. The computer was purchased for my sister, who uses Windows 7 on her laptop. The first day I used it for 8 hours without a probl

  • Photoshop elements wont download on mac

    i purchased photoshop elements 11 for my mac osx 10.8.2 and its not downloading. ive also tried downloading the trial version so that i can just punch in the product key after but it wont download all the way keeps saying theres an error. need help o