Decimals displayes in the List of Totals

Dear experts,
When executing the list of totals records the system displays the amounts in JOD with the following format "30.000" instead of "300.00". This is due to the settings in table TCURX where currency JOD is with 3 decimals.
But I would like to display the data with the usual format, i-e "300.00" : which setting do I have to change ?
NB : when requesting the data in a cube (via Listcube) you have the possibility to select or not the "Do not use any conversion" option. This option deals with this kind of problem. But how do you do for the List of totals ?
Thanks for your help
Regards,
Thibaud

Sorry, my case was not clear.
In fact, the problem comes from BCS Flexible Upload for figures with currency key that have more than 2 decimals (in my example 3 decimals for JOD). In that case, the list of totals displays the figures with a default output conversion, that is to say with these 3 decimals. The problem is that when uploading the flat file, the first step that should be done (that is to say storage with 2 decimals only) is not performed by the system automatically ( indeed if you do a load from data stream, the system multiplies the amount by 10 => standard behaviou). As a result, you need to use the output and input conversion in the mapping tab of the flexible upload.
Regards,
Thibaud

Similar Messages

  • Custom playbar does not display in the list of available widgets

    I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
    http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
    Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
    I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
    Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
    Thanks,
    Peter

    Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

  • Infopath forms are not displaying in the list

    Hi,
       I have created an info path form template after customizing a list form using infopath designer. But it is behaving weird. After submitting the form it is not displaying in the lists allitems view rather it is displaying from designer but directly
    under the list not in the items folder.
    1) Any idea why this is happening?
    2) What is the use of NaN.xml? why it gets created in the list?

    Yes, it sounds very simply, but there is a very tiny little broken piece causing lots troubles.
     It’s tiny piece, so the solution is going to be very simple. On the other hand, it’s hard to find out because it is very tiny broken piece.
    I have feeling that you made a mistake while saving/publishing or filename in submit option (I don’t think List InfoPath form let you set up different submit option).
    Sometimes, it is much faster and easier to re-do it again. I recommend you to following the article below. You can skip most but please pay attention on the start (beginning of Part 2 – Customizing)) and on the end (Part 4 - Publishing)
    http://msdn.microsoft.com/en-us/library/office/gg180738(v=office.14).aspx
    Once you follow the best practice written in the article and make it work, then you may realize the difference and mistake.
    백상하 - Stop hacking my blog http://blog.naver.com/agilepoint
    쉐어포인트 배움터 http://sharepointkorea.com

  • Master data texts in the list of totals records

    Dear all,
    I am trying to display master data texts when doing a List of Totals records, but it is not available.
    In my former projects, I always had the possibility to display master data texts by default.
    Is there any configuration option that I should customize to solve the issue ?
    Many thanks for your help
    Regards,
    Thibaud

    >
    COLLET Thibaud wrote:
    > This has been confirmed by SAP : only available from v 6.02
    yes but as mentioned several times on EHP topics, you can implement the EHP but you must then also activate the function in transaction SFW5 (FIN_ACC_GROUP_CLOSE)

  • Contact not displaying in the list of contact

    HELP. My phone suddenly stop displaying the full list of contact in dialing mode. But I could find/see the full contact list when texting people. can someone help me?

    I am having the exact same problem. Ever since the update.
    They display in the main contact section but not in the dialing contact section.

  • Is there a way in iTunes to save or export the list of "total warnings" that can appear when syncing an iOS devices?

    I often have clients encounter a list of the songs/movies/apps that won't sync with their iPhone or iPad -- usually due to missing items in thier iTunes library.
    Is there any way to copy/save/export that list to facilitate the process of resolving the missing files? That would enable me to fix the issue(s) without the presence of my client or their phone.

    I would just take a screen shot, but I'd end up needing to take dozens, as the attached screenshot shows...
    I can't select any text in the warning window, or I'd just copy and paste.

  • Why do all my artist albums not display in the list format but do when i look at albums

    When I list my songs by artist not all of the albums are listed for some people, but when I turn my phone sideways all the missing albums do show up with album covers and the songs.  What can I do to fix this?

    I'm still not sure that I understand what you have done.
    sgormely61 wrote:
    I thought I used ITUNES by using the add file feature under menu then using the external drive to the load to the my IPOD library.
    To me, that suggests that you copied the music from the hard drive to the iPod directly, as well as importing the songs into your iTunes Library. The usual method is import the songs into your Library and then use iTunes to copy them onto the iPod. Do you see the difference?
    So - if the songs are not in your iTunes Library, you need to sort that out. Once you know they are in your Library, then use iTunes to put a copy onto the iPod.

  • Saved passwords although upper and lower case when displayed in the list of saved passwords transfer to the appropriate location as lower case only.

    running windows 7 64bit pro
    Geico website is the only place where we have upper and lower case user name
    current version firefox 6.0.2

    Make sure that you haven't saved Uppercase and Lowercase versions of that name and password.
    Remove saved Password(s):
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    See also Password Manager:
    *http://kb.mozillazine.org/Password_Manager

  • In the topmost Firefox menu with File,Edit,View,History,Bookmarks, I can not get the list of bookmarks to display as they did before. The Bookmarks menu does not open up into the list of bookmarks.

    I am running Mac os 10.6.8 and Firefox 6.0.1 on a MacBook Pro and on a desktop Macintosh.
    The large computer displays a list of bookmarks when you click on the uppermost Bookmarks menu.
    The MacBook Pro displays the following when you click on the Bookmarks word in the top menu:
    "Show all Bookmarks, Bookmark this Page, Bookmark all Tabs and an icon with a blue dot next to Bookmarks Toolbar with an arrow to the right and below that it says Unsorted Bookmarks.
    There is no display of the list of bookmarks from which I can chose as I do on the larger desktop macintosh computer.
    How can I get the list of bookmarks to show as a list when I click the Bookmarks menu?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    You can also try to move (delete) the Firefox plist file.<br />
    See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]
    Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

  • Custom Infotype not displaying locked records in the list screen (3000)

    I have a custom infotype (9xxx) that will not display the locked records (locked indicator (sprps) is set to X) in the list screen (3000) in PA20 and PA30.
    Any ideas on what may be causing the records to not display in the list screen?
    Thanks,
    Ted

    Hi,
    for creating both employee and appliciant infotype you must check 'Both'  in PM01  IT tab.
    Regards.

  • How do i check the list of invoices which are not posted into sap.

    Hi All,
    Iam displaying(ALV) the list of invoices and epayments for both PO & non PO transactons which are being processed in workflow but not posted in sap.
    (Non po transaction is th eone with out reference of a PO)
    How to check and list out the invoices that are not posted in sap. where does this get stored.
    please help.
    Thanks
    jyothi.

    Hello Jyothi,
    U can give try with EKBE table for getting invoices for PO. In this table there is a field vgabe which has various status. U can try that. Now for Non PO, u would be directly creating invoice doucment using FB60(i guess) which would create an entry directly into BKPF/BSEG. U can scan BKPF for the date range company code document type KR which vendor invoice.

  • Check bix in the list (report out put)

    I have a field GW_FINAL-DECISION  of char1 in an internal table.
    After executing the selection screen the data from internal table is displayed on the list.
    WRITE : GW_FINAL-DECISION AS CHECKBOX.
    when I select the check box from the list, the value of the internal table is to be saved as 'X'.
    please help me in this regard ASAP.

    Hi,
    I think its better if you use ALV to display the report output and you can handle the check box issue with user_command subroutine of Reuse_alv_grid_display function module. Its simplest approach to solve such problems.
    Cheers
    Phani.

  • How to hide the list screen

    HI all,
    When i am calling another screen from my report program to display the result. I am Able to display the result on the intended screen but when i click  on back the back button it is returing to the list screen first and than next to the selection screen.
    I dont want to get the list screen in between but only the selection screen should be displayed when i click on the back button.
    How to avoid the display of the list screen.
    Thanks in advance.
    Regards
    Satish.

    Hi,
    Could u plz give the part of code where u get this problem. Need to know whether u r calling a transaction?
    Try this
    MODULE user_command_9100 INPUT.
      CASE sy-ucomm.
        WHEN 'EXIT' OR  'CANC'.
          LEAVE.    " to SCREEN 0.
        WHEN 'BACK'.
          SET SCREEN '0'.
          LEAVE SCREEN.
    This leaves the program but you may need to re-call the
    transaction to go back to the original screen
        WHEN OTHERS.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_9100  INPUT
    Message was edited by: Judith Jessie Selvi

  • Get a json result to display in a list

    I a new to Flash builder 4.5.1 and Flex and I try to make a mobile application for Android and iOS that will display a list from a webservice.
    The webservice returns the answer in a json.
    I use the data/service to create the connection and when I run the test it shows the four fields of the first record, when I select show Raw I see three records.
    I bind it to a list and it shows me the first record, I have search all over the internet, but been unable to find an example how to get all records to display in the list. Most examples out there are for are for older Flash builder and mostly shows how to deserilize the json string, but it looks like that is already done in the new Flash builder.
    Here is the code that was created.
    <s:CallResponder id="Operation1Result" result="Operation1Result.lastResult as NoName1"/>
    The NoName1 has the four fields configured as strings.
    I have been stock in this for a month, thanks for any help or examples.
    Kim

    Here is the raw json with 2 records:
    I went to a json validator website and I got this result.
    The JSON input is valid according to RFC 4627 (JSON specfication).
    The JSON input is NOT valid in JavaScript, missing ; before statement (At line #1), (At position #121)
    I wrote the webservice my self in Visual Studio using Visual Studios JsonSerializer
    {"Amount":"29.7","Finish":"2\/11\/2011 12:00:00 AM","Invoice":"A187.1         ","date":"2\/7\/2011 12:00:00 AM"}{"Amount":"25.76","Finish":"","Invoice":"A188.1         ","date":"2\/7\/2011 12:00:00 AM"}

  • Total is not getting displayed in the ALV output.

    Hi,
    Total is not getting displayed in the ALV output.
    I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
    Are  there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
    source code:
    DATA: layout TYPE slis_layout_alv,
          IT_eventS  TYPE slis_t_event,
          fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    TYPES: BEGIN OF ty_tab,
          belnr TYPE dberchz-belnr,
          belzart TYPE dberchz-belzart,
          net TYPE dberchz-nettobtr,
          END OF ty_tab.
    DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
    SELECT belnr belzart nettobtr
      FROM dberchz
      INTO TABLE lt_tab[]
    WHERE belnr eq '000000000001'.
      if sy-subrc ne 0.
      ENDIF.
    *  defining layout
    layout-colwidth_optimize = 'X'.
    layout-def_status = 'X'.
    *defning event
    *event
    *defining field catalog
    fcat-col_pos = 1.
    fcat-fieldname = 'BELNR'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 2.
    fcat-fieldname = 'BELZART'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 3.
    fcat-fieldname = 'NET'.
    fcat-tabname  = 'LT_TAB'.
    fcat-do_sum = 'X'.
    APPEND fcat.
    *calling alv
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
      EXPORTING
        i_callback_program             = 'YZ_PLR'
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   IT_EXCLUDING                   =
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
        is_layout                        = layout
        it_fieldcat                      = fcat[]
        i_tabname                        = 'LT_TAB'
        it_events                        = IT_EVENTS[]
    *   IT_SORT                          =
    *   I_TEXT                           = ' '
      tables
        t_outtab                         = lt_tab[]
    * EXCEPTIONS
    *   PROGRAM_ERROR                    = 1
    *   MAXIMUM_OF_APPENDS_REACHED       = 2
    *   OTHERS                           = 3
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    Thanks,
    Gaurav

    Hi
    No I don't think, this is my code (based on your code) and it works fine:
    TYPE-POOLS SLIS.
    DATA: BEGIN OF LT_TAB OCCURS 0,
           BELNR LIKE BSEG-BELNR,
           GJAHR LIKE BSEG-GJAHR,
           WRBTR LIKE BSEG-WRBTR,
           WAERS LIKE BKPF-WAERS,
          END OF LT_TAB.
    DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
          IT_EVENTS  TYPE SLIS_T_EVENT,
          FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
          REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
    START-OF-SELECTION.
      FCAT-COL_POS       = 1.
      FCAT-FIELDNAME     = 'BELNR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'BELNR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 2.
      FCAT-FIELDNAME     = 'GJAHR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'GJAHR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 3.
      FCAT-FIELDNAME     = 'WRBTR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-CFIELDNAME    = 'WAERS'.
      FCAT-REF_FIELDNAME = 'WRBTR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      FCAT-DO_SUM        = 'X'.
      APPEND FCAT.
      FCAT-COL_POS       = 4.
      FCAT-FIELDNAME     = 'WAERS'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'WAERS'.
      FCAT-REF_TABNAME   = 'BKPF'.
      FCAT-DO_SUM        = SPACE.
      APPEND FCAT.
      SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
        WHERE BUKRS = 'MAAB'
          AND BELNR = '0000000001'.
      LT_TAB-WAERS = 'EUR'.
      MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
    *CALLING ALV
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
        EXPORTING
          I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
        EXPORTING
          IS_LAYOUT   = LAYOUT
          IT_FIELDCAT = FCAT[]
          I_TABNAME   = 'LT_TAB'
          IT_EVENTS   = IT_EVENTS[]
        TABLES
          T_OUTTAB    = LT_TAB[].
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
    I've also inserted a currency field
    Max

Maybe you are looking for