Decimals not seen in the query...

Hi Guys,
I have a problem with the query..
I have loaded a KF with 2 decimal places in the cube.
But when I run a query created on the cube, the digits after the decimal place are not seen in the query.
For e.g.  the value of the KF in the cube is 9.85...but in the query, it is seen as 9
please let me know where do i need to make the changes.
FYI..the unit of the KF is %. Has this got anything to do with the problem ?
thanks in advance,
Punkuj...

Hi Aby,
Sorry, i just missed to mention this imp point :
I had done the operation that you have suggested :
I am getting the following output :
In the Cube : 9.85
in the query ( after the decimal selection) : 9.00
I hope that clears my problem..
Thanks..
Punkuj

Similar Messages

  • Info area not seen in the "open query"window

    Hi all
    For some reason my Info area is not seen in the "open query"window, in the BEx Anal. can some tell me how to fix this.
    Thanks
    kavi

    Hi kavi
    I am not sure
    Is it Business content infoarea, for me also business content infoarea is not seen, but in "open query" window if u select the icon for create new query,there it will ask for the cuben here u click binaculor icon for search and type ur infocube technical name there u can get ur cube.
    Hoope it is helpfull........Let me know
    Regards
    NR
    Assign points if it is helpfull

  • BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS

    Blackberry Passport:
    After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
    With original OS 10.3 could connect USB key to transfer my photos with file manager.
    Any suggestions?

    There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
    You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
    - Ira

  • Why the menu to move from one page to another is not seen when the page is online?

    On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
    why the menu to move from one page to another is not seen when the page is online?
    Thank you,
    Roger.

    Where are you publishing and how are you uploading the files?

  • My query prompts does not appear in the Query prompt order list!

    Dear colleagues,
    All of my query prompts does not appear in the Query prompt order list in properties of the query. It seems random which of them that appears there and not.
    This makes it impossible for me to control or change the order of prompts, instead they order themselves alphabetically.
    Is this some kind of bug? Is there a fix for this problem?
    Regards
    Silje

    Hi Stratos,
    We use Edge.
    Correction- we use Enterprise, changed a few months ago!
    By the way, we heard about a bug that probarly causes the problem.
    If the query has ever had a prompt containing 'Between', all prompts created afterwards will not appear in the prompt order list! Even if the between-prompt is deleted.. We still havent heard about a fix for this, please contact me if you hear anyting. It is not an option to create all the queries from scratch again!
    Silje
    Edited by: Silje Mari Sunde on Oct 22, 2009 9:24 AM

  • SmallSearchInputBox not seen in the Migrated site from SP 2010 to SP 2013

    We did the content database attach migration and didnt use any tool.
    We reworked on the Master Page by taking the seattle.master page and put the custom placeholders.
    The design came out well, but the SmallsearchInputbox is not seen in the "View All Site Content" and the Home Page.
    Please help to fix this. Thanks in advance
    Veena R

    Hi Veena,
    What did you mean by “We reworked on the Master Page by taking the seattle.master page and put the custom placeholders”?
    Did you set the seattle.master page as the default master page for the migrated site?
    If yes, I recommend to set the master page to be v4.master and then do visual upgrade for the migrated sites.
    After that, add the custom placeholders to the seattle.master page and then check the results.
    If I misunderstood, please feel free to correct me.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id.  I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability.  How do I do that?

    I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id.  I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability.  How do I do that?

    Not sure if you can have 2 Apple ids contact Apple.com/I'd You may to set IPhone up as new with a different Apple ID & password. Bsydd uk

  • When using facetime, my picture is not seen on the receiving end. How do i fix?

    When using FaceTime, my picture is not seen on the receiving end.  Help!

    Part of training the junk filter is also to mark good messages 'As Not Junk'.
    http://kb.mozillazine.org/Junk_Mail_Controls#Training_the_Junk_Mail_Controls

  • Open View not seen in the 7.0 Query Analyzer

    Hello ,
    I am not able to see open view in the 7.0 Query Analyzer, but that seen in the 3.x Designer
    Are we missing something here, or its the GUI issue
    When we click on Open, I have only 2 options
    Open Query....
    Open Workbook...
    I could locate my view through the open Query & then naviagting it from the Dialog box, but thats does not seem a good way of locating views.
    Any help on this
    Regards
    Lalan

    Hi Lalan,
    The Query View is not missing and it's not a GUI issue.It's by design.
    With 7.x BEx Analyzer,the Query View can be opened only through Open->Open Query dialog
    where you have to select the "Type" as "Query View".It will list the available query views in the open dialog.Select the query view you want to open and click "Open".
    This is the way to open the query view with 7.x Analyzer.
    Rgds,
    Murali

  • BI: some dimensions in multiprovider not showing in the query

    Dear all,
    i have created  cube top of DSO and i created  multiprovider with that cube and with 2 master info object
    but  when i create query it showing only few dimensions in the multiprovider so kindly help me on this
    for example multiprovider has 11 custom dimensions and 3 standard dimensions..!
    Thanks
    sivakumar Ramakrishnan.

    Can you elaborate, how many and which of the dimensions are not shown?(And please specify if they have some special properties like line item,high cardinality etc).Also check whether you have the same problem with the key figures in the multiprovider.
    Also, I know that it sounds silly but check the dataprovider of the query is whether the correct multiprovider.Check that there is characteristic in the dimension which does not appear.Then exit query designer, activate the multiprovider and go to query again.

  • Virtual Characteristic value not populating in the query output

    Hi Experts,
    I am new to BAPI and I am using this to populate the values of virtual characteristics.
    I wrote the below code to populate if an order status got some status value then i need to populate the flag y if not n.
    I got the order value in the reprot. I need to go to order master data and should get the status and then i have to do the comparision and populate the flag zww_teco in the report.
    The below is the compute method of my implementation class.
    FIELD-SYMBOLS :
    <fs_0cs_order> TYPE ANY,
    <fs_zww_teco> TYPE ANY,
    <fs_status>  TYPE ANY.
    if p_cha_0cs_order > 0.
      ASSIGN COMPONENT p_cha_0cs_order OF STRUCTURE C_S_DATA to <fs_0cs_order>.
    endif.
    if p_cha_zww_teco > 0.
      ASSIGN COMPONENT p_cha_zww_teco OF STRUCTURE C_S_DATA to <fs_zww_teco>.
    endif.
    Select single /BIC/ZSYSTATUS
        from /BI0/PCS_ORDER into <fs_status>
       where CS_ORDER = <fs_cs_order>.
    if <fs_status> CP 'TECO'.
      <fs_zww_teco> = 'Y'.
    else.
        <fs_zww_teco> = 'N'.
    endif.
    But I am not sure why the values are not populated. But when i debug , i could see the values for
    P_cha_0cs_order = 35
    p_cha_zww_teco = 54
    But i could get the values of <fs_0cs_order>, <fs_zww_teco> after assign component statement.
    And it is firing me a dump in select statement. Also when I click c_s_data i am getting S____274, S____505 fields like that in the structure but i could see p_cha_0cs_order
    Can you please guide where i am missing ...
    Thanks
    Vamsi
    Edited by: vamsi talluri on Nov 9, 2011 6:14 PM

    Hi Sushant,
      RSRT --> Enter Query Name
    Click on Technical Information --> If " Virtual Char./Key Figures " = Y
    In my case , even then i clciked generate report,
    even after that P_CHA_0CS_ORDER = 35
    and after assign component P_CHA_0CS_ORDER of structure c_s_data to <FS_0CS_ORDER>.
    the <FS_0CS_ORDER> is nothing , here i should get the value of cs_order value of that record but it is coming empty which i am not able to rectify. How should i change or i need to put any other setting to get the value populated into my <FS_0CS_ORDER>.
    Can you please guide me .
    Thanks
    Vamsi

  • UDF Value is not coming in the query report

    Hi all,
    i have designed query report based on AR Invoice which has some UDF .
    all udf have FMS applied and all these udf has values.
    when i run report some times udf values are coming in the report and somtimes not even if udf contains values.
    if i open perticular invoice and again update that udf and again run report now udf value will come in the report.
    every time i need to manualy update the udf even if that udf contain value.
    how to avoide this problem.
    Pls suggest solution.
    Regards,
    Chetan

    Hi Chetan,
    Try this,
    -> Open the require document(module).
    Assign this procedure and then ADD the document
    and Run the Query Report.
    1. Goto the UDF and Click (ShiftAltF2).
    2. Select the SEARCH BY SAVED QUERY.
    3. Assign the FMS Query in UDF.
    4. Select the AUTO REFRESH WHEN FIELD CHENGES.
    5. Select the Auto Refresh Field (for example CardCode (or) Remarks).
    6. Check the Display Saved Values.
    OR
    -> Open the require document(module).
    1. Goto the UDF and Click (ShiftAltF2).
    2. When will you add the document at that time
    you can Click the SHIFT + F2 and than ADD the document.
    and than Run the Query Report.
    Regards,
    Madhan.

  • Currency Conversion type not visible in the query

    Hi ,
    I created one currency type conversion   Z_INR
    exchange rate type : M
    Exchange rate from infoobject : zexch_rate(key fig)
    source curr from data record
    Fixed target curr : INR
    Variable time reference  : A to Exact Day
    Special info object : Ztr_date (Transaction date)
    it got saved succesfully but wen i try to include  this in the query its not visible there . can anyone let me know why this problem is coming
    help will be appreciated .
    i also included rate and date in the query still not visible

    Hi,
    Create Currency conversion type using Trans: RRC1.
    1.Specify your Exchange rate type.                     
    2.Dynamic Exchange rate type
    3.Source curency from data rec.
    4.Fixed currency say USD.
    5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
    Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
    Thanks,
    Nagesh
    Sony Singapore

  • Attribute not visible in the Query Designer

    Hi,
    I am not able to see 0BPPartner as attribute of object 0Customer in the Query designer .It is marked as display attribute.For some user its visible & for Some not.
    Please help me its very urgent.
    Thanks & regards,
    Anita

    Hi Anita,
    As you stated earlier that some users are able to see it and some are not then it surely is a Authorization/Profile issue. Speak to the BASIS/person who manages this to resolve the issue.
    Bye
    Dinesh

  • Changes to the infoobject are not reflecting in the query Desinger level.

    Hi All,
    We removed some Attributes to one characteristic and transported into QA.
    The removed attributes are not getting in BEx query designer in Dev, But we are getting those removed attributes in the context menu of that particular Char in BEx Designer in QA.
    We checked in the Characteristic level, those removed Attributes are not there in Info object level but still those Attributes are displaying in BEx designer level in QA.
    And info object showing as gray color even though we activated the info object, We think this may be the cause to not reflect the changes to BEx Designer level.
    Can any one suggest us to resolve the issue.
    Thanks & Regards,
    Raju. E

    Hi Raju
    Go to transation RSRT enter one of the reports and click to Generate Report. If this solves your problem then you can go to Environment\generate queries directly to regenerate the impacted queries.
    Cheers
    Tansu

Maybe you are looking for