Decimals number when using 'Calculate values as... normalize result'

Hello all,
In a Bex report, we display a quantity per shipping condition (delivered/not delivered). To check the proportions of the quantitybetween delivered and not delivered, we use a calculated keyfigure that relates to this quantity and we set the options 'Calculate values as...' to Normalize result.
3 decimals appear although we set the number of decimals to 1 :
57,367 % instead of 57,4%
I checked OSS notes and couldn't find anything really matching my need.
Any of you have a hint, I take it
Thanks in advance.
Best regards

Yes, we ware aslo facing the same issue and could not track the solution with this problem.........there seems to be some bug in 3.X system, where, when we use <b>normalize</b> the decimal value comes to three places irrespective of the setting done in query

Similar Messages

When using Quite Imposing Plus the resulting file is only given a Temp name which will be sent as the document name.

Our company has recently upgraded form Acrobat Professional 8 to Acrobat professional XI. We also use the Quite Imposing Plus plug-in in both versions. Now when using Quite Imposing Plus the resulting file is only given a Temp name which will be sent as the document name to the printer unless the imposed document is first saved. This was not the case in Acrobat Professional 8. I have attached a screen shots that shows an example.
Is there any reason why this is happening and how can we stop it.

Thank you for your advice although I think you may be incorrect as the naming of the documents made with Quite Imposing is correct in Acrobat 8.
After reading the comment below it would seem something has changed from version nine onwards.
Going forward we plan on changing the way we save and send our imposed documents to print but thank you for your time.

System crashes when using Middle Values on a vertical progress Bar

I've been trying for several days to get a Vertical Slider/Vertical progress bar to work using middle values. Sometimes it'll work fine in the High and Low values mode but crashes when you choose the middle values mode. After many iterations I finally got one verticle slider bar with middle values to work but when I try to add a second slider it crashes again. I'm getting the error that memory cannot be read.

Hi Maureen,
Can you please tell us which version of Xcelsius you are running?
If it's Crystal Xcelsius 4.5, are you running a Hot Fix? If so, which version? This can checked by going to Help --> About Crystal Xcelsius, and then analyzing the Application Version field.
If it's Xcelsius 2008, which version (Present or Engage) are you using?
Are you using Service Pack 1? To check if you're running SP1, you can go to Help --> About Xcelsius. The Build Number field should end with 247 if you have it.
Thanks,
-david

Invalid Serial Number when using Customization Wizard to install Acrobat 8

Hello. I'm trying to install Adobe Acrobat 8 Professional using the Customization Wizard to create a transform. The serial number is for the volume license product, and I put this number in the space provided in the Wizard. Whenever I remotely deploy the msi file and the user opens the program, I get the following error: "You have entered an invalid serial number. Please reinstall Adobe Acrobat 8 Professional and enter in a valid serial number when asked." The program then closes. This does not happen when I install from the CD.
Each of the workstations is a Gateway E-4500S running Windows XP SP2. Adobe Acrobat 7 Professional is uninstalled prior to installation of Acrobat 8, and Acrobat 8 exists alongside Adobe Reader 8.1.1. No other Adobe products are installed apart from Flash Player.
The following are the contents of the setup.ini file:
[Startup]
RequireOS=Windows 2000;Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
CmdLine=/sall /rs
[Product]
msi=AcroPro.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows 2000]
PlatformID=2
MajorVersion=5
ServicePackMajor=4
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I've tried editing the setup.ini file to indicate the full path to the mst file, to no avail. Pretty much at the end of my rope right now. Any suggestions? I'll be happy to provide further information.

Chris Benton - 4:40am Jan 29, 08 PST (#2 of 2)
Correct. The CD installation goes without a hitch. I'm using Attachmate WinInstall to try to deploy the software remotely. It worked fine for Adobe Reader 8.1.1, but it's been a bear for Acrobat 8. I'd be okay with a straight CD installation if it didn't involve fifty machines.

Display skype number when using skype to go to cal...

Is it possible to display my skype number when i am using skype to go to call mobiles?

InternationalSk wrote:
Is it possible to display my skype number when i am using skype to go to call mobiles?
when you call your STG access number, you are then causing a SkypeOut call to be launched on your behalf, which is why you need credit or a calling subscription
it is possible to configure Skype so that your Skype Number is displayed on the destination phone when you make SkypeOut calls
see here for more details
http://www.skype.com/en/features/caller-identification/
Regards,
Neil

PDA build error when using a 'value change' event on two controls

I get a build error when I use a 'value change' event on controls of a different type or even a different numeric representation. I'm using LV 7.1 PDA with no other modules installed. Attached is a picture of the entire code and the error message.
Try to take over the world!
Attachments:
PDA Error.jpg ‏48 KB

Hi,
I verified the error that you are seeing. It appears to be a bug hence I have reported it to our developers. Hopefully this bug would be fixed in the next relaese of the PDA module.
Thank you for pointing this to us. It is through feedback that we can make LabVIEW PDA module even better.
Regards,
Ankita A.
National Instruments

Apple TV name followed by random number when using AirPlay

Hi, I've been having this issue for a while and it's getting on my nerves because I can't seem to find a reason and there's nothing on the internet.
Lately, whenever I use AirPlay, the name of my Apple TV in the drop-down list of devices appears like this:
There's that annoying number between brackets following Apple TV, and I've no idea why it's there. Whenever I try to use AirPlay to stream a movie, I see 188, but when I stream audio I see '2', and some time ago, number 5 appeared; they keep changing. Right now, for instance, there is no number when streaming audio (just 'Apple TV'), but sometimes that annoying number will appear.
I see the number from either my Mac or my iPhone. And just in case it's important, my Mac is connected through ethernet to a Time Capsule, and the Apple TV is wirelessly connected to the TC.
I know it's something rather silly but what bugs me the most is not having the slightest idea of what that number is or why it appears. I want to get rid of it.
Thanks in advance.

I changed my Apple TV name to Living Room Apple TV but it still has the number following the TV identification in the mirroring window. It starts at no number then gains one number at a time. If I unplug the Apple TV electric plug, then plug it back in, the number disappears - then, sometime later, starts adding the number again. Doesn't affect the Apple TV performance, just an irritation.

I can't send Imessage to my contact number when using 3G or LTE. I am using iphone 5c I tried to restart my iphone, remove the simcard, reset the network setting. Please help. Thank you

I can't send Imessage to my contact numbers it says "not delivered" when using 3G or LTE. I am using iphone 5c I tried to restart my iphone, remove the simcard, reset the network setting it didn't work. Please help. Thank you

ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367

When "Use Google Instant", "Open search results in a new browser window." does not function.

In the "Google Search Setting", if select "Do not use Google Instant", then the selected search result of Google Search will be displayed in a new window, but if "Use Google Instant", the selected result will replace Google Search window. This problem does not exist when using Chrome Browser.

That does what it says - even if Google tells the browser to open the page in a new window, you have told Firefox to ignore that and open it in a new tab. Uncheck the box and you should get the result you want.

Error: PL/SQL ORA-00932 inconsistent datatype when using LONG value

Good morning:
I am using a work PL/SQL script where I am using a LONG value in a cursor. When I execute it, I am receiving:
PL/SQL ORA-00932 inconsistent datatype: expected NUMBER got LONG
set serveroutput ON SIZE 1000000
set heading off
set feedback off
set trimspool off
set echo off
set term off
set pagesize 0
SPOOL &so_outfile;
DECLARE
v_data_file          varchar2(30);
--   v_sch_code            varchar2(10);
--   v_instance_name       varchar2(10);
    ws_path            payroll.pybutfl.pybutfl_utl_file_path%TYPE;
    v_data_line           VARCHAR2 (2000)                              := NULL;
    fhandle_o             UTL_FILE.file_type;
    v_line_count          NUMBER                                       := 0;
    v_selected_count      NUMBER                                       := 0;
    v_error_count         NUMBER                                       := 0;
    v_written_count       NUMBER                                       := 0;
    v_error_text          VARCHAR2 (50)       := ' AMACONF_ERR: Unable to write the line. ';
    v_errm                VARCHAR2 (255);
    v_sqlerrm             VARCHAR2 (255);
    v_payment_type        VARCHAR2(10);
CURSOR C1 IS
select RTRIM
        AMRCONF_PIDM_ERR            ||'|'||
        AMRCONF_IDEN_CODE_ERR       ||'|'||
        AMRCONF_ENTRY_DATE_ERR      ||'|'||
        AMRCONF_CONFID_IND_ERR      ||'|'||
       *AMRCONF_COMMENT_ERR        ||'|'||*
        AMRSUBJ_SUBJ_CODE_ERR       ||'|'||
        ERROR_CODE                  ||'|'||
        ERROR_CODE_TEXT                 ) data_line
        from WSUALUMNI.AMRCONF_ERR;
BEGIN
DBMS_OUTPUT.put_line ('Program Generating AMACOMT Mass Update Error File ');
IF UTL_FILE.is_open (fhandle_o)
    THEN
   UTL_FILE.fclose (fhandle_o);
END IF;
/* Name The File Here */
v_data_file := ('Amaconf_error.txt');
SELECT RTRIM (pybutfl_utl_file_path)
      INTO ws_path
      FROM payroll.pybutfl;
      fhandle_o := UTL_FILE.fopen (ws_path, v_data_file, 'w');
      DBMS_OUTPUT.put_line ('UTLFILE file for this run is: ' || ws_path||'/'||v_data_file);
      v_written_count := 0;
FOR c1_rec IN C1 LOOP
      BEGIN
        v_selected_count := v_selected_count + 1;
        v_data_line := rtrim(c1_rec.data_line);
        UTL_FILE.put_line (fhandle_o, v_data_line);
        v_written_count := v_written_count + 1;
    EXCEPTION
     WHEN OTHERS
      THEN
       DBMS_OUTPUT.put_line (v_error_text);
       v_error_count := v_error_count + 1;
    END;
END LOOP;
     DBMS_OUTPUT.put_line ('Number of Records Selected: ' || v_selected_count);
     DBMS_OUTPUT.put_line ('Number of Records Written: ' || v_written_count);
      IF UTL_FILE.is_open (fhandle_o)
      THEN
         UTL_FILE.fclose (fhandle_o);
      END IF;
END;
SPOOL OFF;If I comment out the "AMRCONF_COMMENT_ERR ||'|'||" line, then the script works fine. The table was created as:
Create Table WSUALUMNI.AMRCONF_ERR
    AMRCONF_PIDM_ERR             NUMBER (8)    NOT NULL,
    AMRCONF_IDEN_CODE_ERR        VARCHAR2(5)   NOT NULL,
    AMRCONF_ENTRY_DATE_ERR       DATE          NOT NULL,
    AMRCONF_CONFID_IND_ERR       VARCHAR2(1),
    AMRCONF_COMMENT_ERR          LONG,
    AMRSUBJ_SUBJ_CODE_ERR        VARCHAR2(5)   NOT NULL,
    ERROR_CODE                   VARCHAR2(12) NOT NULL,
    ERROR_CODE_TEXT              VARCHAR2(50) NOT NULL
); I don't get what is the problem here in the script.

Hi,
Feew suggestions
1) LONG is a deprecated type hence if possible start working on changing that column
2) CLOB will your preferred datatype over LONG.
3) you cannot use RTRIM on long.
here is a very quick example
drop table h
create table h (x long,y varchar2(100))
select rtrim(x) from h
select rtrim(y) from hSolution:
[http://www.oracle.com/technology/oramag/code/tips2003/052503.html]
need a better solution change the datatype to clob and
drop table h
create table h (x clob,y varchar2(100))
select dbms_lob.substr( x, 4000, 1 ) from h
select rtrim(y) from hCheers!!!
Bhushan

Error ' unable to interpret "*601" as number ' when using CONVERT_OTF

Hi All ,
I am converting a Smartform to PDF in 4.7 version and I am getting an error like " unable to interpret "*601" as number ' in Convert_otf function module here the importing parameter BIN_FILESIZE is getting *601 value in back ground of FM . Can any one help me in solving this error . Did i miss any parameter's .
Thanks and Regards
Syed Akbar .

Hi.
The asterisk can appear when field length inconsistency takes place at value assignment between two variables.
Example:
DATA:
p_amount TYPE c length 15,
l_amount TYPE p DECIMALS 2.
WRITE: l_amount CURRENCY l_waers TO p_amount.
If value of L_AMOUNT equal '103276149119,40-', then value of P_AMOUNT will be equal '*3276149119,40-' (asterisk appears).
Best regards,
George Shlyahov.

Oracle 11.1.0.7.0 Issue with Streams when using NULL value in a key field

Hi,
we have an issue in our replicated environment using Streams.
We have a replicated table using the following index:
UK_S01_TEXT_FORMAT_TBL01 SOGID
UK_S01_TEXT_FORMAT_TBL01 INDEX_TEXT_FORMAT_ID
UK_S01_TEXT_FORMAT_TBL01 INDEX_LANGUAGE_LABEL
UK_S01_TEXT_FORMAT_TBL01 INDEX_TEXT_FORMAT_COUNTER
UK_S01_TEXT_FORMAT_TBL01 INDEX_PROVIDER_ID
UK_S01_TEXT_FORMAT_TBL01 INDEX_TARIFF_PLAN_COSP_ID
with field INDEX_PROVIDER_ID allowing NULL values. Actually we insert empty strings in there, but as far as I understand Oracle will convert it sliently in a NULL value, which is fine to our application.
When we apply a change on that table (either update or delete) we get errors at streams level and the transaction is not propagated.
Local Transaction ID: 6.28.11170
Source Commit SCN: 25397175
Source Commit Time: Dec-03-2012 12:21:30
Error in Message: 1
Error Message: ORA-26787: The row with key ("INDEX_LANGUAGE_LABEL", "INDEX_PROVIDER_ID", "INDEX_TARIFF_PLAN_COSP_ID", "INDEX_TEXT_FORMAT_COUNTER", "INDEX_TEXT_FORMAT_ID", "SOGID") = (ITALIAN, , , 0, MIKE, 124) does not exist in table
SMS.S01_TEXT_FORMAT_TBL
ORA-01403: no data found
message: 1
TableName: S01_TEXT_FORMAT_TBL
Operation Type: DELETE
_____ Old Data _____
SOID : 1010000008
SOGID : 124
INDEX_TEXT_FORMAT_ID : MIKE
INDEX_LANGUAGE_LABEL : ITALIAN
INDEX_TEXT_FORMAT_COUNTER : 0
TEXT_FORMAT : Hai raggiunto i 100MB di traffico incluso nello scatto
APPLICA_PERIOD_CRI_ID :
INDEX_TARIFF_PLAN_COSP_ID :
INDEX_PROVIDER_ID :
If I force the set of primary keys to be only the NOT NULL fields, I can successfully apply the error, but since we may have them storing both NULL and NOT NULL values, this is not a solution.
I'm wondering why the DB on one hand converts the empty string in a NULL while inserting, but it looks the Apply process onStandby is not able to do the same when looking for the record before applying the transaction.
Thanks in advance!
Cheers,
Mike

Its showing all objects the user has permission to see- why does that need to be restricted?

Display Blank Tablix when using multi value parameter in SSRS 2008 R2

I have a main report which contains tablix1 and tablix2. Tablix1 is using DataSet1 and Tablix2 is using DataSet2. I have a multi value parameter set up with 71 items to choose from. My company owns 71 convenience stores and what I am doing is comparing sales
for a hard coded date in DataSet1 versus a hard coded date in DataSet2, sales for the same date 1 year ago. Pretty simple, works great when both datasets return data. However, we have a store that we opened up about 4 months ago. The data is displayed
in Tablix1, but since the store did not exist 1 year ago, there is no data for Tablix2. I have tried the "No Row Message" and Repeating Column and Row Headers, etc. When I choose all stores that existed last year, the report runs great. When I choose
a store that existed last year and our new store (#39) that did not, the report messes up. The below image, you can see Tablix1 is good, but Tablix2 should be blank and only show the column headers. Instead it moved Store #40's Tablix1 beside it. If I
run the report and just select store #39, Tablix1 runs as it should and Tablix2 shows The column headers and a blank row. It disappears as soon as I select multiple values.
When you click the next page button, you will see Store 40's Tablix2 where it's Tablix1 should be and then a blank space where Tablix2 should be.

Hi BassMan75,
According to your description, there is a main report with subreport, since the store did not exist one year ago, there is no data for the subreport. You want to show tablix grid even through there is no data in subreport, right?
Report data comes from datasets, if there is no corresponding value in the dataset, only column headers will be displayed in the report, we could not set the rows to blank, so we can’t achieve your goal directly. As a workaround, we can put one text box
in the report with the message: No data for the store. In this way, if there is no data meets search condition, the message will be displayed in the report. Please refer to the following steps:
Click and select the tablix.
In Properties window, in No Rows section, in NoRowsMessage text box, type No data for the store.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How to get the total page number when using Crystal Report in JSP

In my JSP, I use the class CrystalReportViewer to generate and display the report views. But this class only sypply the function to get the info of the active view.
Thus with this info, I only can get the active view's page number. How can I get the report total page number without showing the last page first?
Thanks.

Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

"Wrong" material number when using manufacturer part number

Hello gurus,
when I create a new material, first the system gives me a new material number according to the given number range of the material type, let's say 100000002. So far, so good.
But when I enter a manufacturer part number (e.g. 123456789) and press enter, the material number changes to 00000000000000000000000000000000100000002. And when I save the material master, the number is 123456789, allthough that number is not even allowed concerning the number range.
What's wrong here? Is this a bug or a feature? In my view the manufacturer part number should never overwrite our own material number!
Thanks
Alicia

What Material type you are Using for Creating Manufacturer Parts?? Its HERS and the Number Range for HERS Material type is Internal.
If you Want to Maintain externally then you have to Define new external no range and assign to HERS.
When you Select HERS you can see the Basic Text and Purchasing Views alone. In that You have to enter Desc of Mfg part and Input Original Material no.
Here is the Process for Manufacturer Part Profile :
Create External No ranges for Vendor Account Group MNFR and save.
Now Create Each Make / Manufacturer like ABB as one Vendor in XK01 Trxn code.
Create Material Code original say XXXX in MM01 with ROH material type. (for eg Transistor which is available with ABB & Seimens make)
Create material code for ABB make say 11with Material type HERS which contain only two views (Basic Data & Purchasing) and give Make, Original material No & Material group and other details and save.
Create material code for Seimens make say 12with Material type HERS which contain only two views (Basic Data & Purchasing) and give Make, Original material No & Material group and other details and save.
Create a Purchase order with original Material XXXX, then it will ask for mnfg part profile then select the material and click F4 on it it will show you the created mfg part nos like ABB 11 & seimes 12 and select one and save.
Prerequisite is you have to Activate Mfg part profile in OMPN trxn code
And in Material master Purchasing View Select the mfg part profile and save
Even if you set the Mfg part number in Display mode in SPRO settings system will throw the same error.
Now What can be done is :
Either go to ME21N and Select material tab after inputting and press f4 and select Manufacturer part number options then system will showe the list of mfg part number maintained to that material select the desired and save.
Else go to MM02 Purchasing View and in Mfg part Profile tab there must be a four charecter profile assigned to field Remove this and save.
The Second option is not a good practice.

Decimals number when using 'Calculate values as... normalize result'

Similar Messages

Maybe you are looking for