Decklink Studio + Windows Server 2008: Dropping frames after 10h of streaming

Hi!
We just bought two Decklink Studio cards to use with our live streaming servers.
First, everything works fine. We have high quality flash live streaming, using SDI input with embedded audio.
But after approximately 10 hours of streaming, the quality comes down, and the frame rate too, looks like the encoder start are dropping frames.
Then if we just try to stop FLME, they freeze.
The only way to close the program is forcing with CRTL+ALT+DEL.
Memory usage and CPU load do not change when the problem appears: 1.4GB RAM used, 18% of CPU load in all 8 cores.
At this time, if we restart the FMLE, all works fine again, for more or less 10 hours.
The specs are:
FLME 3.1
Windows Server 2008 R2 (64)
Decklink Studio w/ Driver 7.5.2.0
Dell PowerEdge R610
16GB RAM
Dual Intel Xeon E5504
I`ve tested a basic core i5 desktop with 4GB of RAM, running windows XP 32bit , and works fine for more then 36 hours with 1.3GB RAM used and 80% of CPU load. (need to stop tests after 36h).
Looks like a 64 bit problem with FLME.
Can you guys help me with this problem?
Thanks
Marcelo Guerra

Make sure that you are using the right set of device drivers for the 64-bit machine. Please share your session log file.

Similar Messages

FLME + Decklink Studio: Dropping frames after 10h of streaming

Hi!
We just bought two Decklink Studio cards to use with our live streaming servers.
First, everything works fine. We have high quality flash live streaming, using SDI input with embedded audio.
But after approximately 10 hours of streaming, the quality comes down, and the frame rate too, looks like the encoder start are dropping frames.
Then if we just try to stop the live encoder, they freeze.
The only way to close the program is forcing with CRTL+ALT+DEL.
At this time, if we restart the FMLE, all works fine again, for more or less 10 hours.
The specs are:
FLME 3.1
Windows Server 2008 R2 (64)
Decklink Driver 7.5.2.0
Dell PowerEdge R610
16GB RAM
Dual Intel Xeon E5504
Can you guys help me with this problem?
Thanks
Marcelo Guerra

I would recommend you post your query on FMLE forum for faster resolution: http://forums.adobe.com/community/flash/flash_media_live_encoder

Text frame not shown on windows server 2008

I am facing the issue that on windows server 2008 the frame of a text fields are not shown. On windows 7 there is no issue. As example I have attached two screenshots showing that on windows 7 the frames for precision and scale are shown, but on 2008 not (additional info: the text field is there and can be edited).
Do you know such an issue? Any suggestion how to solve it?
Many thanks for your help
Peter

Hi,
When you click the Plus sign next to a master page to create another master page, it doesn't inherit the objects from the master page. It simply creates a blank master page. If you want the new master page to inherit the objects, then right click the desired master page and select "Duplicate page".
As far as child pages are concerned, yes, they should inherit all the objects and properties of the master page. It is really odd if its not happening for you. What happens when you right click the child page and apply desired master for that menu?
Regards,
Aish

Crystal Reports XI stopped working error message on a Windows Server 2008

We recently installed Crystal Report XI in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
"Crystal Reports has stopped working"
Problem signature:
Problem Event Name: BEX
Application Name: crw32.exe
Application Version: 11.0.0.1282
Application Timestamp: 422d5c77
Fault Module Name: StackHash_1fc1
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 7ef2fbfc
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 1fc1
Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
Additional Information 3: 2f92
Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
Any recommendation on what is causing this error?
Thanks,
Luis

Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
The error I'm getting when trying to start the service is:
The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created

Hi There,
As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
DCRServer is down or may not be completely up. Check if the DCRServer process is running.
And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Thanks,

Also Here is more info output:
C:\Program Files (x86)\CSCOpx>pdshow -brief
Process               State                                     Pid
Tomcat                Program started - No mgt msgs received    1572
TomcatMonitor         Running normally                          2236
Apache                Program started - No mgt msgs received    2436
DataPurge             Administrator has shut down this server   0
DCRServer             Failed to run                             0
CMFOGSServer          Administrator has shut down this server   0
EssentialsDM          Administrator has shut down this server   0
ConfigMgmtServer      Never started                             0
ConfigUtilityService Never started                             0
CTMJrmServer          Administrator has shut down this server   0
ChangeAudit           Never started                             0
SyslogAnalyzer        Program started - No mgt msgs received    2976
ICServer              Running normally                          5096
EnergyWise            Never started                             0
PMCOGSServer          Administrator has shut down this server   0
IPMOGSServer          Administrator has shut down this server   0
IPMProcess            Never started                             0
TISServer             Program started - No mgt msgs received    2544
DFMOGSServer          Program started - No mgt msgs received    876
InventoryCollector    Running normally                          3052
Interactor            Program started - No mgt msgs received    5136
InventoryCollector1   Program started - No mgt msgs received    5144
Interactor1           Program started - No mgt msgs received    5308
PTMServer             Program started - No mgt msgs received    5320
UPMProcess            Never started                             0
TISDiscoveryJobCreate Administrator has shut down this server   0
SyslogCollector       Running normally                          5340
Proxy                 Program started - No mgt msgs received    5348
PMServer              Running normally                          5360
NameServer            Program started - No mgt msgs received    5680
NameServiceMonitor    Running normally                          5876
LicenseServer         Program started - No mgt msgs received    5884
FHPurgeTask           Never started                             0
EventFramework        Program started - No mgt msgs received    5892
EPMServer             Program started - No mgt msgs received    5904
FHServer              Administrator has shut down this server   0
NOSServer             Program started - No mgt msgs received    5580
diskWatcher           Running normally                          5640
DFMMultiProcLogger    Program started - No mgt msgs received    5864
DFMLogServer          Program started - No mgt msgs received    4896
DFMCTMStartup         Administrator has shut down this server   0
DfmBroker             Running normally                          6104
DfmServer             Running normally                          6416
DfmServer1            Running normally                          6424
DCRDevicePoll         Never started                             0
CSRegistryServer      Running normally                          6432
CSDiscovery           Never started                             0
AdapterServer1        Program started - No mgt msgs received    6440
AdapterServer         Program started - No mgt msgs received    6448
C:\Program Files (x86)\CSCOpx>pdshow DCRServer
        Process= DCRServer
        State = Failed to run
        Pid    = 0
        RC     = -3
        Signo = 1073741821
        Start = N/A
        Stop   = 07/02/2012 17:39:06
        Core   = Not applicable
        Info   = Application failed or was registered incorrectly.
C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
The Cisco Prime Daemon Manager service is stopping..........................................
The Cisco Prime Daemon Manager service was stopped successfully.
C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
ERROR: [StandardDbUpgrade] : Database cmf is not installed.
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
ERROR: There is no database available to change password.
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
'cmf' is not a valid data source for the product.

DBCA error ORA-01034 oracle not available on Windows server 2008 r2 64

Hi All,
I have installed oracle 11.2.0.1 on my system having OS Windows server 2008. Then after that through DBCA i was creating the database during that i got ORA-01034 oracle not available. if any body know how to resolve it please reply me.
Thanks & Regards,
Arya

Did you got the error in between when DBCA executed some percentage of work? PLease check its logfiles to get the exact error.

Problems installing Crystal Reports 2008 Server on Windows Server 2008 serv

I attempted to install the Crystal Reports 2008 product on one of our Windows Server 2008 servers.
After installing disk 1
Crystal Reports 2008 Server attempts to open up in IE...... but opens up to a blank page
http://bmlfileserver:8080/CmcApp/
anyone have any idea why? why does it not prompt for the second CD?
Is this a compatibility with Windows Server 2008?

I'm attempting to install CRS 2008 on Windows Server 2008 as well, and I'm running into a few issues. Did you ever get yours resolved? I started by trying to use IIS, but I'm uninstalling it completely now and will try Tomcat instead. Which route did you go?

10.1.0.2.0 database download link needed for window server 2008 64bit

Here is our plan. We are currently running oracle 10.1.0.2 database on a windowsServer 2003 32 bit.
Now we would like to migrate the database to 10gR2 and run it on our new server windows server 2008 64bit. After doing research, I think I need to go through the following step:
1) install 10.1.0.2 on our new server,
2) clone the database using the current back up data on the new server.
3) install 10gR2 on the new server.
4) using dbua to upgrade the older database to the new version.
Please let me know whether those steps are correct.
If yes, where can I download 10.1.0.2 version database for 64bit window server 2008?
The only link I can find is http://www.oracle.com/technology/software/products/database/index.html
but 10gR1 not listed.
Thank you very much!

Welcome to the forums !
10gR1 is de-supported, hence you will not find any download links. You will have to create an SR to see if Support can mail you the install media.
How big is the database ? One other option you have is to export the 10.1.0.2 database and import into 10gR2 on the new server. This will achieve the upgrade in one step and will not require the intermediate 10.1.0.2 version on the new server.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/preup.htm#BABFHFIJ
MOS Doc 419550.1- Different Upgrade Methods For Upgrading Your Database
HTH
Srini

Problems after print server migration to Windows Server 2008 R2

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Webi scheduling error in BO 4.0 SP04 after security patch updates in windows server 2008 R2

We are getting below error in BO 4.0 SP04 Web Intelligence report scheduling after security patch updates in windows server 2008 R2
while trying to invoke the method com.businessobjects.sdk.core.server.IServer.getServerContext() of an object returned from com.businessobjects.rebean.wi.impl.services.DocumentInstanceManagementServiceImpl.getServer(com.businessobjects.sdk.core.context.IContext, com.businessobjects.rebean.wi.model.engine.IDocumentInstance)
We have reverted back security patch but still giving above scheduling problem in BO 4.0 SP04 WebI and we can view and refresh report.
Is there any way to fix the scheduling problem in BO 4.0 SP04 WebI?

HI,
Check SAP notes if they will help you.
1934855 - Scheduled Web Intelligence documents fail with com.businessobjects.sdk.core.server Error
1916443 - Scheduling Web Intellignce reports which are having long names to excel and pdf fails.
1792921 - Unable to schedule Webi documents in Excel or PDF format

Visual Studio 2005 deploy Crystal Report to Windows Server 2008 64-bit

I've read a lot of posts here regarding deploying on a 64-bit server, but I'm still confused.
We use Visual Studio 2005 to develop on a Windows XP machine. We use the built-in version of Crystal that comes with VS2005.
We want to deploy the runtime to a Windows Server 2008 running 64-bit. We want to deploy using the msi runtime components and not the merge modules.
We end up with the message "An error has occurred while attempting to load Crystal Reports".
So, the question is, can we build & deploy a 64-bit version, and if so, what are we doing wrong here ? At first glance, I don't see VS 2005 as listing Windows 2008 as a supported platform, so am I dead in the water right there ? If that's the case .... then what are my options ?
Any help or pointing me in the right direction would be greatly appreciated !
Thank You,
Wayne

In a nut shell, the only two 64 bit versions of Crystal Reports are 10.2 (bundles with .NET 2005) and 10.5 (bundles with .NET 2008). All other versions of Crystal Reports are 32 bit only. For more info see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article.
Ludek

Using drag and drop in remote desktop on windows server 2008

we running an application on windows server 2008 terminal services .. this application was support drag and drop functionality .. i understand that terminal services on windows 2008 is supported to drag and drop but is not happening !! even when i run remote desktop connection on this server the drag and the drop is not working !
i need to enable the drag and drop for windows 2008 terminal services ..
Thanks in advance

Hello Ayman,
If your requirement is to drag and drop files between local and remote sessions, Danny is right. Drag-and-drop feature is not supported in Windows Server 2008-based Terminal Server, which is a by-design behavior hard-coded in the current version of the Remote Desktop Protocol.
As a workaround, I recommend you to use copy-and-paste function instead of drag-and-drop. To enable the copy-and-paste between local and remote session, please enable the clipboard redirection in Windows Server 2008-based RDC. (In Windows Server 2003 environment, local drive redirection is needed.)
Hope it helps. Thanks.
Best Regards,
Lionel Chen

Backed up files partially disappear after restore (Windows Server 2008 R2 - Windows Server Backup)

Dear all,
I am experiencing a problem with "Windows Server 2008 R2", using Windows Server Backup.
Here's my setup:
Server: RAID 5 Disk setup
Backup:
By using Windows Server Backup (within Windows Server 2008 R2), C: and D: were fully backed up, with "System State" and "Baremetal Recovery" options selected. Backup went okay without any errors.
Restore:
By using Windows Recovery Environment (booted from Windows Server DVD), C: and D: were fully restored to the original partitions with "System Recovery" option found within Windows RE (without re-formatting partitions during restore). Restore
went OK without any errors. Rebooted, and system has been running fine.
Problem:
After the restore, the system itself seems running OK; no BSOD, no crash, no visible errors.
However, our client insisted some files (around 6 to 7) which are related to the propriety software has "disappeared" right after System Recovery.
Question:
Since Windows Server Backup is using "Volume Shadow Copy" technology which enables "live backup" of the running system, is it possible that some files will disappear (=restore error) after
System Recovery?
I cannot really find any errors or warnings related to Windows Server Backup in the event log, through. No Windows-backup errors. No VSS errors, too.
Do anybody have experienced this kind of problem in the past? Any suggestion will be greatly appreciated.

Thank you for your reply, Ms. Mandy.
To make things clear, let me explain to you briefly:
1. The "missing data" was backed up with "full system backup".
2. After a system restore from the above backup image, as you mentioned, partitions has been overwritten with the partions' backup data in the Backup Data Set taken by Windows Server Backup. No error with backup. No error after restore, and reboot - system
has been running fine.
3. Although there was a report that the affected files(about 7 java exectables) were missing after the above restore operation, other aspect of system was running fine at the time of the report.
4. I have checked the original backup data set - and voila, there ARE files which seems to gone after restore.
5. When I used Windows Server Backup "on" Windows Server 2008 R2 normal environment (= NOT Recovery environment from DVD) and selectd ONLY these affected files to restore, these files could be RESTORED successfully, without any errors. SO... data
was property backed up.
> The recovery will overwrite the partitions so files created after the backup point will be missing.
I understand, and this is not the case this time, because the affected files are already present in the backup data set (= I have mounted the backup data as VHD, and I could clearly see them present in the mounted VHD file)
Plus, these files are completely restoreable via "selective file restore" in Windows Server Backup.
Things I want to know/confirm:
> The recovery will overwrite the partitions
If I understand this correctly, in case that the files in question are already present in the backup data set, these files SHOULD be restored after full system restore, right? (If these files could not be restored, Windows Server Backup SHOULD show some errors.)
What do you think, Ms. Mandy? :)
Jo

IE is not showing on windows server 2008 after updates

Hi,
I have installed Window server 2008 R2.
After installing i found IE 8 on the server, but after 1day it automatically updated some softwares and now IE is not showing on my system.
i.e IE uninstalled after the updates to the windows server.
Please can some one help me to get the IE. I tried installing IE8, IE9 after downloading but it is showing "Internet Explorer 8 is not supported on this operating system"
Regards
Krishna

Hi,
Internet Explorer 8 runs on any of the following operating systems:
Windows Vista, 32-bit versions
Windows Vista, 64-bit versions
Windows Vista with Service Pack 1 (SP 1) or a later version
Windows XP, 32-bit versions with Service Pack 2 (SP2) or a later version
Windows XP Professional, 64-bit Edition
Windows Server 2003, 32-bit versions with Service Pack 2 (SP2) or a later version
Windows Server 2003, 64-bit versions with Service Pack 2 (SP2) or a later version
Windows Server 2008, 32-bit, or a later version
Windows Server 2008, 64-bit, or a later version
Please expand the below path to check whether IE is there:
C:\Program Files\Internet Explorer
Regards,
Yan Li
Regards, Yan Li

Windows Server 2008 sp2 Task Scheduler missing next run time after restart

Hi,
I have the issue that there does not appear to be a fix for with a server 2008 sp2 (NOT R2) where after a restart all tasks are missing the next run time so I need to edit each task to add this time back in. I have tried the hotfix in KB 950035
but this when you run it is only for Vista and cannot be installed despite saying it's also for Server 2008.
For some reason also this is Task Scheduler version 1 not 2 which I thought came with windows since Vista so SP2 should have it.
Anyone got any ideas?
Thanks,

Hi Evans,
Would you please let us know current situation of this issue?
As Dave mentioned, Windows Server 2008 Service Pack 2 include all the previously released updates for Windows
Server 2008.
Based on your description, I understand that all scheduled tasks still miss the next run time on your Windows
Server SP2 when the server restart. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please open Properties of one problematic scheduled task, navigate to History tab, then
check if find some relevant events or errors. Those may help us to go further analyze.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Decklink Studio + Windows Server 2008: Dropping frames after 10h of streaming

Similar Messages

Maybe you are looking for