Declined Barclay's Hawaiian Air Business" Recon"

Hi Everyone , Well to recap and update regarding I applied for the Barclay Hawaiian Air Business Card on the 21st , was denied due to my report locked again, on the 22nd so I called the # regarding the status to verify my unlocked the rep verified this was later that evening,  I called back got the same rep again. and he pulled my TU ,asked 10 min questions more like interrogation LOL , mostly my credit report , the inquires, Citi Bank account,(don't know why) in short I cut him off nicely and explained, yes I have recent inquires because in looking for good business rewards account that suits my traveling, then he says I see you do have excellent  credit and you have shown you can handle large amount payments , puts me on hold for about 5 min comes back and tells me we need further review and someone will contact you or relieved a letter in the mail 7-10 business day .OK figured that wasn't good. Well today I decided to call back a different # and got the check status and they only had my resent approval the Barclay RCI, and card is on its way but no Hawaiian air mentioned I was connected the a management rep (very bubbly rep) looks up my account and says declined and asked me do I want to know why it was decline (course) transfers me over to the security department and the rep ask me how am I doing, I responded I would do better if I heard I was approved, anyway the rep, says they sent out a letter reasons why it was declined and reasons was they needed proof of ownership docs of the company. I told the rep no problem. I'll send it now. Fax #. He puts me on hold 2 min comes back and says that department is close until 11-pm for me to call back and they will give me what they needed,2nd call, was connected to security dept., during the call got disconnected Grrrrrr3rd call back, connected to security dept. again. Ran down the situation, security rep puts me on hold, comes back, they need to send copy of DL, Utility bill, SS# because, 2 accounts opened less than a week apart put a red flag on my account,Ok, I asked if I can fax all required docs, the rep said no, (which I will call again hope I’ll get a different Dept. rep) for me to mail in only. Then after I hung up , 5 min later my home phone rings  I pick up and ask for me , I said this is me, and the same rep asked did we just talked about an application you submitted . Yes I did, and the rep says ok great thank you, I will note that on your app, that I confirmed your application and verified, We barclay wait for your documents... That’s all.

NY2014 wrote:
Hi Everyone , Well to recap and update regarding I applied for the Barclay Hawaiian Air Business Card on the 21st , was denied due to my report locked again, on the 22nd so I called the # regarding the status to verify my unlocked the rep verified this was later that evening,  I called back got the same rep again. and he pulled my TU ,asked 10 min questions more like interrogation LOL , mostly my credit report , the inquires, Citi Bank account,(don't know why) in short I cut him off nicely and explained, yes I have recent inquires because in looking for good business rewards account that suits my traveling, then he says I see you do have excellent  credit and you have shown you can handle large amount payments , puts me on hold for about 5 min comes back and tells me we need further review and someone will contact you or relieved a letter in the mail 7-10 business day .OK figured that wasn't good. Well today I decided to call back a different # and got the check status and they only had my resent approval the Barclay RCI, and card is on its way but no Hawaiian air mentioned I was connected the a management rep (very bubbly rep) looks up my account and says declined and asked me do I want to know why it was decline (course) transfers me over to the security department and the rep ask me how am I doing, I responded I would do better if I heard I was approved, anyway the rep, says they sent out a letter reasons why it was declined and reasons was they needed proof of ownership docs of the company. I told the rep no problem. I'll send it now. Fax #. He puts me on hold 2 min comes back and says that department is close until 11-pm for me to call back and they will give me what they needed,2nd call, was connected to security dept., during the call got disconnected Grrrrrr3rd call back, connected to security dept. again. Ran down the situation, security rep puts me on hold, comes back, they need to send copy of DL, Utility bill, SS# because, 2 accounts opened less than a week apart put a red flag on my account,Ok, I asked if I can fax all required docs, the rep said no, (which I will call again hope I’ll get a different Dept. rep) for me to mail in only. Then after I hung up , 5 min later my home phone rings  I pick up and ask for me , I said this is me, and the same rep asked did we just talked about an application you submitted . Yes I did, and the rep says ok great thank you, I will note that on your app, that I confirmed your application and verified, We barclay wait for your documents... That’s all.Wow! Can't wait to hear the end of that story... Please let us know and good luck...

Similar Messages

  • Approval U.S Bank perks+Signature Visa

     Was Just Approved after a week ago I submitted an app 8/22 to open a on line checking  on the app ask if I wanted to apply for there card I said oh well another HP. sure.LOLanyways, like everyone said on here about U.S Bank,  Manual review two days after i get a call from there verifying dept, ask if I did an application on line.and apps  they were having trouble verifying my Identity, (still haven't heard back regarding my checking yet ,but received a call asking my verification and unfreeze my credit report was told it was a SP , not going to give the long story, but APPROVED $10,000  0% months 11.99 APR, very happy with U.S, was just approved. I'll guess i'll add was approved firday  with  NFCU Business Visa $7.500 10.15 rate Business CLOC . $2.500,OK I think I am definitely going to be locked in the Gardens.but still have 2  business CC ,apps,i am waiting to hear back from before I applied two weeks ago   had to send docs .for verification  Thanks again everyone,, 

                                                                     thanks everyone .. was just approved Hawaiian air business as well $9,000 SL ..I am done .. 

  • 2 of 3 approved....how is barclays for recons?

    So in the past month, I have decided to go after some business cards for my side gig; 1.  Chase Ink Plus ... approved2.  Amex Business Gold ...approved3.  Barclays Business Hawaiian Air ....denied I have not got the letter yet on the denial from barclays...anyone get a successful recon from them?  I have 3 personal cards from barclays with combined CL of $52K...the last one approved on Jan of this year.. 1 inq on TU with Fico of 798.

    Congrats on your approvals.. You can recon with Barclays however, they are sensitive to a lot of inquiries so if you have alot you may have to wait a bit and re-apply.  But it does not hurt to call.

  • Use of user status and business actions

    Hi all,
    I'm new at status profiles, user status and business actions.
    Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
    After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
    Let's say I've a status profile with following user status with according business actions:
    - status: new;   business action: to progress
    - status: in progress;   business action: to confirm
    - status: confirmed;   business action: decline or close
    - status: closed;   business action: close
    What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
    Regards,
    Christian

    Christian;
    If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
    1. Enter a Status Profile.
    2. Assign the status profile to an Object Type.
    3. Define the User Status.
    4. Assign Business Transactions to user statuses.
    5. Translate the status profile and user statuses.
    You can also to use this function to simulate the status development for a particular object.
    To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
    Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
    You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
    The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
    Status profile info
    Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
    The first block contains the permitted object types.
    The second block contains the user statuses.
    The third block contains the following information for each user status:
    which transactions it allows
    which transactions it allows with a warning
    which transactions it disallows.
    I hope help to you
    Regards
    Luciano Nobrega

  • Why the 'decline' option not present in the lock screen for an incoming call in ios7?

    Why is there no call decline option on the lock screen for an incoming call in IOS7??

    Yeah... One workaround is double-click the lock button. But still it's stupid. The "Decline" is available only when screen in 'unlocked'. They think, you only need the to decline only when you are busy doing something on the iPhone, else need not to decline the call i.e. when your screen is locked.
    WTH, is my phone the only thing in the world, I could be busy with to decline??

  • Probleme 3 g sur ipad air

    mon ipad air ne reconnait plus aucun signal 3g malgre qu'il apparait en mode recherche manuel et me marque toujours reseau indisponible

    Up

  • Approved for a Barclays Rewards Card

    Hi So i  received a pre approval for the Barclays rewards card and surprised i was approved for 1500.00 is there anything i should know about Barclay's?  I heard once youre in good you are in a good position.  They offer the apple barclays visa card which i love Apple.  is that a good sign that my rebuilding is improving because before they wouldnt give me the time of day.

    sparklerd34 wrote:
    Hi So i  received a pre approval for the Barclays rewards card and surprised i was approved for 1500.00 is there anything i should know about Barclay's?  I heard once youre in good you are in a good position.  They offer the apple barclays visa card which i love Apple.  is that a good sign that my rebuilding is improving because before they wouldnt give me the time of day.Congrats on the approval.  If you take care of that card you'll be good with Barclays.  I had to recon to get my first card with them, then 6 months later I was able to get a 2nd card with instant approval.

  • Best language for Adobe Air?

    For a couple of days now I have been trying to develop an AIR
    business application in Flash, but several times I have hit into
    inconveniences using Flash. Some examples:
    - there is no DateField in Flash (only in AS2 which is not
    compatible with AIR) and several other components are missing.
    - the stage/frames setup isn't very well suited for
    applications that more have a page-structure rather than a
    movie/timeline structure.
    - building a multi-page form is extremely tedious and almost
    not feasible in Flash (haven't come to a final verdict of that
    yet...)
    And I have found that there are other annoying things with
    using Flash. I'm also against the extreme verbal abundance that
    Actionscript as an object-oriented language sometimes results in,
    but that is a completely difference discussion, espacially since
    Flex also uses AS3...!
    On the contrary I see that the DateField and other components
    are available in Flex... so considering all this, this question
    popped into my mind:
    Are there any of the three different ways of making AIR
    applications (AJAX - Flash - Flex) that are preferrable over the
    other, maybe not in that more things are possible, but in that it's
    better optimized for making business applications?
    Would love to hear some good comments on this, espacially
    from Adobe themselves or another AIR expert...

    WinterNet,
    > For a couple of days now I have been trying to develop
    an AIR
    > business application in Flash, but several times I have
    hit into
    > inconveniences using Flash. Eg. there is no DateField in
    Flash
    > (only in AS2 which is not compatible with AIR)
    It's true, a number of UI components (and all of the data
    components) go
    missing when your FLA is configured for ActionScript 3.0.
    That said, the
    thing to keep in mind is that components are, at bottom,
    nothing more than
    custom classes packaged in a way that makes them available in
    the Components
    panel. In fact, you can even write custom components of your
    own -- if
    you're inclined (I realize that isn't everyone's cup of tea)
    -- and many 3rd
    party teams and developers have done just that.
    You might want to check out the Yahoo! ASTRA components,
    which are free
    under the BSD license:
    http://developer.yahoo.com/flash/astra-flash/
    Unfortunately, they don't include a DateField component, but
    you might
    find some other useful stuff in there. They matched their API
    very closely
    with the APIs that ship natively in Flash.
    I did find an AS3 DateField component here:
    http://www.flashscript.biz/components/flash9datechooser/datechooser.html
    Might be worth checking out.
    > On the contrary I see that the DateField and other
    components are
    > available in Flex...
    Yes, and that's because Flex Builder (in fact, the whole
    Flex platform)
    has been positioned as Adobe's answer to JBuilder, Visual
    Studio, and
    similar programming IDEs. On the one hand, Flash and Flex
    Builder are the
    same: both tools produce SWFs -- SWFs that run in the same
    Flash Player --
    and on the other hand, they're different, because they
    provide different
    workflows (and different components sets).
    > Are there any of the three different ways of making AIR
    > applications that are preferrable over the other, maybe
    not in
    > that more things are possible, but in that it's better
    optimized
    > for making business applications?
    To my thinking, it comes entirely down to what toolset
    you're most
    comfortable with. If you're a Dreamweaver guru, you'll
    publish your AIR
    apps as HTML-based, AJAX-enhanced projects. If you're a Flash
    guru, you'll
    use ActionScript and probably include more artwork and
    animations than a
    someone using Flex.
    By the sound of your project, you may well want to use Flex,
    whose
    extensive AS3 platform gives you access to numerous
    components that may suit
    your needs.
    In the end, if you're planning to code in ActionScript 3.0,
    you're
    ulitmately using the same technology; namely, the Flash
    Platform. If you're
    more of a business app coder, you'll probably use the Flex
    compiler, even if
    you don't use Flex Builder. Why? Because you'll want to take
    advantage of
    the Flex platform, which is written in AS3. It's all still
    Flash ... it's
    just that using the Flex platform gives you access to
    pre-built app-inclined
    APIs.
    David Stiller
    Co-author, The ActionScript 3.0 Quick Reference Guide
    http://tinyurl.com/2s28a5
    "Luck is the residue of good design."

  • Websites on Firefox: For some reason the top line of every website (including Log-in) is inactive, does not work!

    An example: On the current page, clicking (single or double click) on items in the page heading produce no result.
    This has been noted on my e-mail accounts with Yahoo.co.uk, Postmaster.co.uk and gmail.com, Barclays bank and other business and commercial sites. The main problem is caused by the inability to sign/log in.

    HI Bev,
    *"I've tried safari, firefox and camino and it's the same for all of them."*
    Since this is happening on all of your browsers I'm inclined to think it's the Parental Controls causing the glitch. Can you disable Parental Contols and see if the problem persists?
    Keep in mind you can only enable and disable Parental Control's from your admin account.
    Also, try repairing disk permissions and see if that helps...
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Open System Preferences/Accounts. Click the gold padlock bottom left side of the window. You will be prompted for your admin password. Now select your personal account in the panel on the left. Now, make sure the box next to: Allow user to administer this computer is checked. Quit System Preferences and restart your Mac. Try internet access ...
    One other thing. I noticed in your profile you are running 10.5.6. You need to be up to 10.5.8.
    You can download and install the 10.5.8 combo update available here.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    Carolyn

  • Skype steals focus DON'T IGNORE THIS

    I've seen a few posts about this get ignored or no replies and I find this completely unacceptable. There are many full screen games that have huge consequences to dying. I play Diablo 3 and there is a hardcore mode where if you die, your character is dead and you can't play it anymore. Diablo 2 had this as well as Path of Exile and other similar games I'm sure. The point is having Skype steal focus and minimize your game when someone calls you is unacceptable. There NEED to be an option to auto decline or show yourself as busy while in a full screen application. Many other IM clients have this kind of feature. There's no reason why Microsoft cannot implement this in 2014. If no one responds to this post, I will bump it daily until someone does (unless I get banned) because this is simply unacceptable. Admins or moderators please contact the appropriate people to see that this issue is taken care of. Thanks.

    Hi and welcome to the Skype Community,
    Change your Skype online status to "Do not disturb" and you won't be notified about incoming calls or chats during your D3 session.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Mobile banking app

    Just changed to a leap from an iphone but i cant get banking apps from Barclays how can a business smart phone not have a banks App?? might have to send it back....

    you can try download this apps on this link
    http://www.klikbca.com/mbca/informasi.html

  • Employee grouping for travel entitlement

    Hi Experts,
    Where do i specify Employee grouping for entitlement in Travel Management?
    For Ex:Vice President will be eligible for travl mode air(business Class) and 5 star hotel stay
               Manager will be eligble for travel mode train(AC Train) and 3 star hotel stay.
    where do i have to configure this mode of travel,class of travel and hotel accomadation against employees? Pleas help me on this.
    Thanks and Regards,
    Shilpashree

    Hi AP,
    DO i have to maintain this in vehicle type and class to achieve different modes and class of travel?
    Wat about Hotel acoomodation entitlement?
    Thanks and Regards,
    Shilpashree.M.R

  • Other Manufactuers can't be happy about this!

    Other manufactuers can't be happy about Apple's early price drop. This will only teach all consumers to wait after launches until prices drop. This will have dramatic effects for many early adopters moving forward across the board. Sony, Panasonic, Samsung and others can't be happy with this. It's bad PR for all electronic manufacturers.

    Your post indicates a very possible scenario.
    All potential new buyers may just wait for a possible further price decline.
    In this electronic business as well as other businesses, this is called "eating your own babies". Everybody is waiting for the next big move, and it can be counter-productive to what Apple is attempting to accomplish.
    mikeab

  • Error Installing AIR 1.5.3 app on Vista Business

    Hiya,
    Unable to install an AIR 1.5.3 app on a Vista Business, cribs about the file being corrupt/damaged.
    The same installer appears to install without any errors on Windows XP SP1 & SP2, Windows 7.
    Any Ideas...
    Many Thanks
    Follows is the installation log...
    Starting app install of file:///H:/Temp%20Files/TestApp.air
    UI SWF load is complete
    UI initialized
    Unpackaging to C:\Users\Klem\AppData\Local\Temp\fla3A13.tmp
    unpackaging is complete
    application is bound to side-by-side version 1.0
    application is bound to this version of the runtime
    app id com.blah.TestApp
    pub id 0D7DF9FDC8D22E042E344B4E5EF89B22F15E27B5.1
    Application not located
    Waiting for user confirmation
    User confirmed action: install
    creating native installer in: C:\Users\Klem\AppData\Local\Temp\flaE9C3.tmp
    native installer creation complete
    Starting install
    Destination for installed application is C:\Program Files
    stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
    stateInstallingWithElevation: enter install
    stateInstallingWithElevation: c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files\Common Files" -silent -logToStdout -url -location "C:\Program Files" -desktopShortcut -programMenu file:///H:/Temp%20Files/TestApp.air
    subinstaller: Starting silent app install of file:///H:/Temp%20Files/TestApp.air
    subinstaller: UI SWF load is complete
    subinstaller: UI initialized
    subinstaller: Unpackaging to C:\Users\administrator\AppData\Local\Temp\fla5B59.tmp
    subinstaller: failed while unpackaging: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032" errorID=2032]
    Failed during elevated install: error 5005 Error #2032
    starting cleanup of temporary files
    application installer exiting

    It appears AIR does not like installation from a mapped network on Vista.
    Installing from a CD / USB storage or from a local copy seems to resolve this issue.

  • Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

    Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

    Yes - well you have to make the file in a word processing Application.
    You could use TextEdit (it's free) Pages (words only), or Numbers (data base) (they are part of iWorks - and may or may not be free (included) on your machine.  You could use MS Office (it is not free) You could use any Open source word processor that plays well with Office (NeoOffice, StarOffice) they are free.
    That's how you create content and copy/paste URLS. Then you save the file to the desktop. If you are going to make more than one file... you make a folder on the desktop and save, or drag the file(s) into it.
    You attach it to your e-mail client which will compress it and e-mail it. An excellent reference is to use Help, from the menu bar, also from inside any application. From your library or book store the OS X for Dummies has a lot of useful information (you don't read it cover to cover but look up chapters about what you'd like to do)
    You can also make appointments at your local Apple store for individualized help (if a store is nearby)

Maybe you are looking for

  • Xml publisher report giving warning

    Hi friends, I have a issue with xml publisher report. All existing xml publisher reports are working fine. Only the problem is newly created one. Application version 11.5.10.2 dDtabase 9i BIdesktop version is 10.1.3.4.1 MS office  2010 i checked the

  • How can I execute a existing source code in visual studio 2012?

    My friend sent me a mini project(ASP.Net) through mail in a zipped folder. I extracted it and it contains source code and databases. I don't know how to execute it in visual studio 2012. I read that I can do it by choosing Project from existing code

  • Function modules for Classifications

    Hi Sapall. here iam have got some abap technical work to do on classifications. before creating new tasks i just looked at some of the  existing programs in Material management and classification. i have observed  that  most of the programs are using

  • Ticker Issue

    Hi Gurus, I'm new on OBIEE 11G and try to access a dashboard to look for a ticker. In other computer it displayed normally. I have install shockwave flash object 10.2.1531 and access other chart normally. Is anyone know what other add on that needed?

  • Negative sign before amount in report display(urgent)

    i have one condititon in a rerport that if SHKZG is debitor then before that amount no sign means positive and if it is creditor then a minus sign should come before tha amount in list display. for example- if rs 100 is credit then it should display