Decode error when outputting to file to later burn to DVD

I have an MPG file created in Ulead Media Studio Pro (which I can no longer run as it does not run on Windows 7 which my new PC uses). I created a new project in PE9, added the mpg file, dragged it to the timeline and told Premiere to change the project settings to match. It is now PAL DVD Upper field first. There is no red line on the timeline above the clip. When I try to output it to a file for later burning to DVD I get a decode error around a particular frame. When I go near that frame in the monitor window and step forward one frame at a time it moves smoothly until it gets to the frame in question when there is a noticeable delay from pressing the arrow button and the time counter updating to the next frame number. The MPG plays fine in Windows Media Player and VLC player - it shows a cross fade transition at the spot that fails in PE9. Is there anything I can do to fix this? I don't have independent DVD authoring software as otherwise that would be an option.

Depending on the source footage, I have found that some other programs do a better job of handling them. For that reason, I have CyberLink PowerDirector, and Magix MovieEdit Pro on my computer. Actually, since I use PrPro for most of my work, that is also why I bought and installed PrE - it handles footage well, that PrPro chokes on.
Personally, I am less comfortable actually editing in PowerDirector, or MovieEdit Pro (older versions of both), but PrE is closer to PrPro, so I rely on it as my "first step," and the other two NLE's more as just converters.
Still, if another tool in your video-editing toolbox, works better, there is zero shame in using it. Sometimes an adjustable spanner is all a mechanic needs, but when they require a universal socket with a "wobbly" extension on their Snap-On rachet, then the adjustable spanner goes back into the toolbox.
Most of all, I am glad that you are able to produce the desired results. That is what it's all about.
Thanks for reporting your workflow and your success. Good luck.
Hunt

Similar Messages

Error in InfoPackage: Error when uploading Flat Files

Hello Experts,
I encoutered this error in Info Package when uploading a flat file.
When i try to click on the "Preview" button, this errors appear:
"Error 8 when compiling the upload program: Row
237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
Please help to advise what is this error about and how to resolve this?

hi Annie,
run RSA1 and try again
Error when compiling the upload program (Message no. RSAR233)
other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
A newer version of the data type error when loading
Flat File Preview error message
Error when loading from Flat File
Error message when previewing data in InfoPackage
hope this helps.

Error when publishing to file

i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
It still works if i just publish to mobileme.
Any ideas?
Im trying to get my site going on go daddy, and kinda really need it in a folder...

If you are still getting the error then its likely that you have a corrupt domain file.
To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
If this works, your original file is corrupt.

Multiple JavaScript errors when opening aspx file in Dreamweaver

I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."

Hi Steven,
Not sure if this is related, but can you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

Error when creating ZIP file (return value 2 when IGS was called)

Hello All
I attempted to Schedule a Query to the Portal folders and executes fine. However when it's scheduled to and email, I am getting this message
'Error when creating ZIP file (return value 2 when IGS was called)'
Any ideas?
Thanks ...BK

Hello Kai
Thanks very much for the info. how would I know what patch the IGS is?
Thank you.
Regards..BK

HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

Welcome to the forums.
Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings. You could start a new iDVD project, or try deleting encoded assets.
Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have). Double layer DVDs can be finicky and are used for video more than 2 hrs long.
Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
For a detailed treatise, see: https://discussions.apple.com/thread/3926901?tstart=0
John

SOLVED: Getting an Input/Output error when accessing certain files

My system started failing a few days ago because of sudden Input/Output errors when trying to access certain files. It was running fine until various applications started crashing like for example Pidgin (in retrospect probably because of DBus crashing). I decided to reboot and now can't login anymore because the DBus module fails to load which in turn means that HAL doesn't load either and so I can't use my keyboard to login.
The error message I get from DBus is that it can't access the file /etc/dbus-1/system.d/org.freedesktop.PolicyKit.conf because of an Input/Output error. I tried to fix/see what was wrong using the arch livecd. Because I thought my problem had to do with a pacman update that had failed before I'd rebooted, I updated my system and I noticed that when pacman tried to access other files it came back with the same error message. The files seemed pretty random, one of them was fakeroot.conf and then several library files like libfaad (sorry this is kind of vague but I'm away from home right now and can't go online very often so I'm writing this from memory).
I'm guessing its a hard drive problem because checking the filesystem for errors came back with nothing. I was just wondering whether anyone had any other ideas before I go and reinstall. I'm going back home tomorrow so I'll be able to follow any advice/reinstall then.
Last edited by siell (2010-04-08 17:01:37)

UPDATE
It seems to be fixed! The second run of e2fsck fixed some more issues and the files that were causing the problems earlier seemed to have bad inodes. Boots fine now and I can get into my system. I checked and I still have a reasonable amount of free space so I don't think that was the reason ... I have no idea how the filesystem got so corrupted out of nowhere.
A few things are different, for example, it asked me to unlock the keyring and I couldn't mount my external encrypted drive anymore and had to do it manually with cryptsetup. e2fsck made quite a few changes so I imagine it's due to that. Shouldn't be to hard to fix though.
Thanks for your help!

Error when rendering my file...

an output module failed. the file may be damaged or corrupted.(-1610153464), how can i fix

I'm having the same issue. None of the usual recommendations have helped. specs are below.
Thanks!
What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number. USING AE CC 2014.1.1
Have you installed the recent updates? (If not, you should. They fix a lot of problems.) YES, UPDATED NVIDIA K5000 DRIVER AND AE
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac". PC WINDOWS 8.1
If you are getting error message(s), what is the full text of the error message(s)? AFTER EFFECTS ERROR: RENDERING ERROR WHILE WRITING TO FILE "FILE PATH" AN OUTPUT MODULE FAILED. THE FILE IMAY BE DAMAGED OR CORRUPTED. (-1610153464)
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking? NEW COMP NO 3RD PARTY PLUGINS, SIMPLE SOLID IN 1920X1080 COMP, COMP ADDED TO RENDER QUE AS QUICKTIME H.264 100%.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time? NEVER WORKED
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected. INTEL ZEON CPU E-52690 V2 @3.00 GHZ 2 PROCESSORS, 56GB RAM, 64-BIT OS X64 BASED PROCESSOR, TWO CONNECTED 27 INCH MONITORS, NO EXTERAL DRIVES CONNECTED, STANDARD RAID DRIVE IN PC.
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)? CUDA K5000 CARD, RECENTLY UPDATED TO VERSION 340.84 (11.1)
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)? INVIDIA GRAPHICS CARD ONLY
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime"., NO SOURCE FOOTAGE, STRAIGHT SOLID ONLY IN COMP
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2".
What other software are you running?QUICKTIME 7.7.5
Do you have any third-party effects or codecs installed? NO
Are you using OpenGL features in After Effects? YES, TRIED WITH IT OFF ALSO
Does the problem only happen with your final output, RAM preview, or both? ONLY FINAL OUTPUT WITH QUICKTIME FORMATS
Are you using Render Multiple Frames Simultaneously multiprocessing? TRIED BOTH WITH AND WITHOUT
Are you using the ray-traced 3D renderer? NO
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help. 1920X1080 23.98 SQUARE PIXELS QUICKTIME H.264 100% 30 SECONDS LONG. EXPORT GETS 34 FRAMES IN ( NUMBER OF PROCESSORS BEING USED) BEFORE ERROR MESSAGE POPS UP. ALSO TRIED WITH ONLY TWO PROCESSORS RUNNING AND IT CRASHED AT FRAME 2

Getting an error when outputing with Autocad

I have the latest Adobe viewer installed 10.1.1. Yet I get an error when trying to output to a PDF. It wasn't always this way.
error is; "No PDF viewer installed"
Please help

Mac or Win? Can you open Reader? In any case, you cannot create PDFs with Reader, which is, well, very little more than a reader of PDF files.

Smart View error when opening Powerpoint files read-only

Users are experiencing the following error when they open a Powerpoint file as read only. Using MS Office 2007 with Hyperion 11.1.2.1 Doesn't happen in edit mode. Error reappears every time user pages down to next slide. Quite annoying!
Shape. Tags : Invalid request. Presentations cannot be modified.
Has anyone experienced this issue and resolved it?
Thanks,

Source: My oracle support
=============================================================================================================================
Applies to:
Hyperion Planning - Version: 11.1.2.1.000 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Symptoms
In Smart View Version 11.1.2.1.000, when attempting to open a PowerPoint document that is already open by other user the following error occurs:
ERROR : Shape.Tags: Invalid Request. Presentation cannot be modified.
Cause
This issue has been verified as Unpublished Bug 12418027: SMART VIEW ERROR : SHAPE.TAGS : INVALID REQUEST. PRESENTATION CANNOT BE MODIFIED
The cause of the problem is that when a presentation is edited by another user, an exception will be thrown while trying to query the tags in the presentation from a different process.
Solution
This issue has been fixed in the Oracle Hyperion Smart View for Office, Release 11.1.2.0.000 Patch Set 1 (PS1): 11.1.2.1.102 Release.
This patch is available via My Oracle Support:
1. Log into the My Oracle Support portal.
2. Choose the Patches & Updates tab.
3. Enter the Patch Name or Number from the drop-down box.
4. Perform a search for Patch:12968304 for your corresponding OS platform.
5. The patch file includes both installers and the readme.
Additional Information:
Please refer to the patch readme for system requirements, dependencies, and installation instructions.

Error when outputting

When I go to output my file (File > Export > Media) I set everything up hit OK then Media Encoder opens and then I press "Start Que" and within seconds I get the little yellow triagle next to the Job. I click on it and notepad opens up the Error Log and It says:
Could not read from the source. Please check if it has moved or been deleted.
I have cehcked the path and the file is there. What the heck is going on?
Many thanks,
Houston
I have never had this problem before.

This very link that you suggested takes to mack to the Adobe article that started this post.
http://kb2.adobe.com/cps/407/kb407106.html
So I am back wher eI started.. I really dont want to have to reaload Adobe Suite. My God I don't have that kind of time. Can I just reload Premier PRO?
So you've already read that Adobe KB Article and have followed all suggestions? I saw no mention of that in the OP.
Well, if you ARE logged-in as Administrator, have followed the suggestions in the KB, it's probably time to follow the second suggestion in that second step, unless you are trying to edit to/from an external, or NAS, as Bill suggests.
Good luck, and sorry to send you a link that you have already followed with no success.
Hunt

Internal server error when adding a file item

Hi Gurus,
We have Portal 9.0.2.0.1. We add all our documents to portal as file item. I am getting the following error when I try to add a file item. The file size varies from 1 MB to 10MB. It's all .pdf or .doc files. I am able to add 1 or 2 files, then I get this error.
please post a reply if you have any idea about this one.
Thanks
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle HTTP Server/1.3.22 Server at prtl.nw.us Port 7778

I suggest that you log a TAR and work with Oracle Support on resolving this problem.
Regards,
Jerry
PortalPM

Error when deploying ear file

Hello
What could be the problem that I get this error when deploying my ear file with a web service within.
[#|2008-03-29T17:43:02.640+0100|SEVERE|sun-appserver-pe9.0|javax.enterprise.system.tools.deployment|_ThreadID=12;_ThreadName=Thread-26;_RequestID=0a164c90-57bc-4d4a-8b3f-270fc4584891;|Exception occured in J2EEC Phase
com.sun.enterprise.deployment.backend.IASDeploymentException: Fatal Error from EJB Compiler -- C:\Sun\AppServer\domains\domain1\generated\xml\j2ee-apps\agency_app\agency_jar\META-INF\wsdl\AgencyModuleWebServiceService.wsdl (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:70)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:161)
     at java.net.URL.openStream(URL.java:1007)
     at com.sun.enterprise.webservice.WsUtil.generateFinalWsdl(WsUtil.java:699)
     at com.sun.enterprise.webservice.WsUtil.generateFinalWsdl(WsUtil.java:643)
     at com.sun.enterprise.deployment.backend.WebServiceDeployer.doWebServiceDeployment(WebServiceDeployer.java:165)
     at com.sun.ejb.codegen.IASEJBC.doCompile(IASEJBC.java:855)
     at com.sun.ejb.codegen.IASEJBC.ejbc(IASEJBC.java:580)
     at com.sun.enterprise.deployment.backend.EJBCompiler.preDeployApp(EJBCompiler.java:339)
     at com.sun.enterprise.deployment.backend.EJBCompiler.compile(EJBCompiler.java:222)
     at com.sun.enterprise.deployment.backend.AppDeployer.runEJBC(AppDeployer.java:359)
     at com.sun.enterprise.deployment.backend.AppDeployer.deploy(AppDeployer.java:214)
     at com.sun.enterprise.deployment.backend.AppDeployer.doRequestFinish(AppDeployer.java:129)
     at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:169)
     at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:95)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:871)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:266)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:739)
     at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:174)
     at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:210)
|#]when I deployed this application on a custom domain setup, it does not fail. But it fails on default domain.
Regards
Michael

How did you create your datasource, can you post the content, without passwords of course.
Greetings.

Weblogic 10.3.2 Error when deploying ear file

Using WLS 10.3.2, wwhen activating changes, I obtain following errors:
An error occurred during activation of changes, please see the log for details.
Exception occured while downloading files
[DeploymentService:290066]Error occurred while downloading files from admin server for deployment request "1,285,335,764,675". Underlying error is: "[DeploymentService:290065]Deployment service servlet encountered an Exception while handling the deployment datatransfer message for request id "1,285,335,764,675" from server "p8aerm". Exception is: "Could not create temp location for application : Engine-wl"."
Would someone with expertise confirm where "temp location for application" is on an AIX 6.1 server.
Any help appreciated.

What user runs your weblogic? the oracle user?
In my case weblogic is started by a weblogic user who owns all the WLS folders.
Try $> ps -fea | grep p8ce to verify the user running the weblogic instance.
In a RH5 the privileges are (755):
4 drwxr-xr-x 2 weblogic weblogic 4096 Nov 19 2009 .internal
4 drwxr-xr-x 5 weblogic weblogic 4096 Nov 19 2009 WLinternal
4 drwxr-xr-x 8 weblogic weblogic 4096 Nov 23 2009 ..
4 -rw-r--r-- 1 weblogic weblogic 379 Sep 20 16:53 WebServiceUtils.ser
0 -rw-r--r-- 1 weblogic weblogic 0 Sep 20 16:55 SysAdmServer.lok
4 drwxr-xr-x 5 weblogic weblogic 4096 Sep 21 19:28 .
4 drwxr-xr-x 6 weblogic weblogic 4096 Sep 21 19:28 WLuser
The folder WLuser will be created when the deploy starts.
In your case an error happends before this step.

Error when uploading par files - Exception

Hi all,
I'm getting an error when I try to upload any par file of the MSS package through the administration console. The error thrown is:
Messages:
INFO: Detected Portal Archive File: com.sap.pct.hcm.attendanceoverview.par
INFO: Application successfully stored in the PCD
Messages from Server ID 8657950
ERROR: Operation failed: The archive com.sap.pct.hcm.attendanceoverview has not been deployed.
ERROR: Exception caught: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem.prepare]: com.sap.pct.hcm.attendanceoverview
The error is displayed in the administration console. The logs don't say anything useful. I'm getting a few exceptions about finding archives and this error message: get data source CVERS failed! Trying SAP/BC_UME...
I have checked the rights to all directories and the directory structure. We're running EP6.0 with SP 9.
Thanks for your time.
regards,
Dion

Hi Dion,
i would think that SAP tries to stop uploads of par files which should be installed with them SDM or import of a whole package.
Try the following :
- rename the par file name from com.sap.... to something else...
or :
- import the par into Developer Studio and change the project name
change/delete the META-INF files
Another question : why do you want to install only certain elements of the MSS package ?
Regards,
Kai

Decode error when outputting to file to later burn to DVD

Similar Messages

Maybe you are looking for