Decoder error on media center

I have media center for an hp computer: model # m7170N... it will no longer record or play television. The error message: decoder error- video has either malfunctioned or is not installed comes up. how can i fix this??

Your Microsoft Windows Xp SP3 version value in the registry may be inconsistent or missing ...
- Please navigate to the following tree in the registry editor and paste the value for "CSDVersion"
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
The regkey can be accessed by searching for 'CSDVersion' in the registry editor or you could follow the steps below.
(1) Click 'Start' > choose 'Run'
(2) type 'regedit' in the run window and click 'ok'. This will open the registry editor
(3) Navigate the tree to 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion'
(4) look in the left side pane and locate 'CSDVersion' and its value.
And how did your upgrade to SP3 happen? Did it come preinstalled on your machine or have you upgraded it by downloading upgrades from the internet.
~S~

Similar Messages

Windows Media Center - wont launch...due to Software Restriction Policy???

Current system:
Windows Vista x64 Ultimate RETAIL installed onto clean system.
UAC disabled
Using full administrator account w/ no restrictions
Problem:
Anytime I attempt to launch Windows Media Center or Media Center Extender I receive the following popup error and the program does not attempt to to even start:
Error:
[Windows Media Center
"Windows cannot open this program because it has been prevented by a software restriction policy. For more information contact your system administrator."
Summary:
When I initialy installed the OS, this problem did not exist. I was able to launch WMC just fine. Only after a couple month of reinstalling necessary base applications do I now get this error. My family cannot even use it as an extender for the XBOX360 anymore.
From what i can tell there are a lot of people with this issue and NO SOLUTION from MS as yet. I did see in one post that someone else had this error and was able to correct it by setting WMC as the default application in "Default Programs --> Set Program Access and Computer Defaults" This did not work for me at all. At this point I am at a complete loss. Any insight would be appreciated.
-J

For Windows 8 here was the solution that FIXED it for us:
http://windows.microsoft.com/en-us/windows-8/set-program-access-computer-defaults
To start, open the Set Program access and computer defaults page:
Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then clickSearch.)
Enter control panel in the search box, and then tap or click Control
Panel.
Under View by:, select Large
Icons, and then tap or click Default Programs.
Tap or click Set program access and computer defaults.
Set program access
If you want to make a program inaccessible without uninstalling it, you can set it so it doesn't appear where programs are typically listed.
On the Set Program access and computer defaults page, under Choose
a configuration, tap or click Custom.
Clear the Enable access to this program check box next to the programs you want to make inaccessible,
and then tap or click OK.
Shawn Lafferty

Media Center s/w may be corrupted

I keep getting the error message: Media Center has stopped capturing data due to low data rate in the TV signal...
This cannot be so, as the TV signal is driving three televisions. It the Media Center s/w is the problem, how can I reload it? It came on the computer (HP Media Center PC m1160n). I have the recovery disks. Can they be used to write over or fix any errors in the Media Center s/w?
I need to get a signal in order to record (using Media Center), but keep getting the above error message. Any ideas?

Hi:
Did you try using the system restore utility to restore your PC to an earlier date when it was running correctly?
If not, you may want to try that option.
I have searched around the internet and it appears you need to reinstall the whole OS to get WMC to load as well. I thought there was a way to just load that part of the program, but I can't find it.
Also you did not list what version of WMC you have...XP 2005, Vista or W7?
Paul

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

Media Center Guide - Failed to retrieve EpgListings Error

When is Microsoft going to address this? This is a HUGE PROBLEM for people that use WMC. It couldnt be a bigger problem as it renders my ENTIRE media setup worthless. Below is a link to a workaround and a forum with tons of people having
the same problem.
http://www.thegreenbutton.tv/forums/viewtopic.php?p=80288&f=5#p80288
Re-running the TV setup works for a few weeks but then you start getting the same error. I have 2 TVs in the house that use WMC. Both have the problem. I did what this link suggested and it fixed TV1. I re-ran the setup again on TV2
and it worked, until tonight which is about 2 weeks since the last time I ran it. This is a temporary workaround NOT a solution!
This is a MICROSOFT PROBLEM and this is EXACTLY why ZERO people take WMC seriously. Can you imagine if you turned on your TV with dish, directv, comcast, whatever and you had no guide data and you had to jump through all sorts of technical hoops to
get your guide back? It would be chaos. WMC "could" be one of the best pieces of software from microsoft but with this sort of thing happening, it will never be anything but a snap-in.
I also find it amazing that there is no help on this MAJOR, SHOWSTOPPING, APPLICATION KILLING, bug/defect/issue within Microsoft's forums. I have customers that I have recommended and built WMC based HTPCs because of how "great" they are...I
mean were. This is embarrassing for me, my company, and it should be for Microsoft. I am completely done using WMC after this. We have better support from the open source solutions.

On Mon, 27 Oct 2014 07:52:51 +0000, BmcD wrote:
WMC "could" be one of the best pieces of software from microsoft but with this sort of thing happening, it will never be anything but a snap-in.
Microsoft has discontinued all development for Windows Media Center. There is no
development team as those folks have all moved on to other groups or left
Microsoft. It's difficult to get MSFT to look at problems with EPG downloads. If
you post your issue at
http://connect.microsoft.com/site1145 (you may have to
sign in/create an account to see the feedback tab) and it is trending, they
might eventually look at the issue. There was an issue in the UK about 10 days
ago.
Please don't shoot the messenger.
-- Barb Bowman

Media center problem with Qosmio G35-650 - error message

hello all
I have a problem with media center on qosmio g35-650.
When starting live tv , an error message appears and writes "application failure please restart your computer again. if problem persists again please contact with your hardware assistance"
It was working yesterday and today something happened.
Also it cant find any tv signal available. Is it a hardware problem?
regards
cem mete

Hello
Please dont be mad on me but in most cases is the user the problem and not the machine. I really dont know what is problem in your case but if the unit has well TV signal there should not be any problem.
Your unit must be an US model. Those notebooks are not known to me but I presume that Qosmio player is preinstalled too. I have G20 and TV works perfect (WMCE and Qosmio player). What is with Qosmio player in your case? Does it work well?
Be sure that TV tuner is listed properly in device manager and also TV antenna is connected properly.

Error Downloading Windows 7 Media Center Guide

Setting up an attempting to use Windows 7 Media Center using a Silicondust HD HomeRun Prime Cable box tuner.
I can tune channels and watch programs. However, the media guide will not download
Tasks-> Settings-> General-> Automatic Download Options-> Download Now results in the following error:
Guide Download error The Guide could not be downloaded. For more information, right click on the Windows Media Center system tray icon and open the Windows Media Center update log.
The event log has the following error:
Failed to retrieve Directory (Error: Invalid security token.)

There are threads about this being intermittent... being that it goes down from time to time. Microsoft may have another issue with their Directory.
Also check out this link:
http://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/gets-the-error-invalid-security-token-while/153a7cff-2913-4cc9-8016-f81b23629b9b
If this is helpful please mark as solution.
Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015!

Envy 23 Protected Content Error in Window Media Center

I have a brand new HP Envy 23 with Windows 8 and Intel HD Graphics. I run Windows Media Center and have an HD Homerun Cable Card TV Tuner attached on my network so Media Center can redord HD Cable programs.
Recorded programs play back fine to my XBOX360 Media Center Extender, however, if I try to watch a recorded show on the HP Envy (which is the machine doing the actual recording) I get an error message that the Display Device Does Not Support the Playback of Protected Content.
I was hoping a display driver update might fix this, but I don't see any available. Since HP offers this machine with a TV tuner, and with Blu-Ray, I would think the Intel HD Grapics Hardware and the display would support HD playback.
Has anyone else encountered this, and found a solution?
Thanks!

Hi jfmcgowan,
I have been researching the problem that you are having and came across several other people that were having the same problem. The closest thing that I could find to a solution was the link below. It is regarding Contect Protection Messages Interrupt View of High Definition Movies. Try that out and let me know.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01530801
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Media Center 2 Script Error!

I have not been able to set up my copy of Media Center 2. Towards the end of installation, the following error shows up:
The following things cannot Self Register:WINDEx.dll
When I try to run the program afterwards, several messages come up saying that there is a script error. The DLL file is present after installation. This really frustrates me. Ive tried reinstalling several times. And yes, I have tried installing the patch. Nothing works!!!!!
Has anybody else had this problem? DOes anybody know why this is happening?

........................
Well, at least im not alone......
This program is in par with the OpenMG software from Sony.....
They were made by the same software.....
What a load of shista.
X( :O X(

Widows Media Center (msn video player) 'Video Error' box

Hi
I believe this is a know problem, which is needs an updated to fix the software / player. Is there one on the way?
When I try to play an internet video in Widows Media Center (msn video player) I get 'Video Error' box (blue box in right hand corner) saying 'There was a problem accessing this video. Try viewing a different one'. The video does play, but with the error message over it. When you click the okay option in the blue box the video stops playing. This happens on every video I select.
I've reinstalled Windows Media Center, run all updates and updated flash. Knowhow.com advise that this is a known problem with no solution, and needs an update to fix it. Can you find out when there will be a fix?
Windows 7 Home Premium, Service Pack 1
HP Touchsmart 520-1030uk
Intel Core i3-2120 CPU 3.30GHz
4.00 GB
64-bit

Hi,
According to your description, it probably there’s a conflict between how the Windows 8 HDMI drivers handle 7.1 and how Media Center handles sound.
You can check the Windows Update, if there is any updates relate with HDMI Audio Drivers, you can install it, then this problem will began.
Also you can go to ASRock official site to download the latest HDMI driver for test.
If still there is no use, you may need to contact your machine manufacture for further assistance.
In addition, because this problem relate with WMC, I would recommend you access the site below to ask the question for further help.
http://experts.windows.com/f/
Roger Lu
TechNet Community Support

[TV@Master] ERROR .... TV Tuner & XP Media Center

Hello every body ,, I'm new member in this great site ..
I have PC with :
Intel Desktop Board D915GAV
Pentium 4 Processor 3.4
DDR 400/333 1 GB
Intel Graphics Media Accelerator 900
Intel High Definition Audio
Hard Disk 120 GB SATA.
MSI TV@nywhere Master
Windows XP Professional Media Center
Now ,, my pc and MSI TV Tuner work properly and I see and record directly without any problem , but the major problem is when I start Media Center to see and record from TV I got this message .
I need your advice and help ..
Thank you ..

the answer is already in the stickies:
Quote
"Windows XP Media Center says that my "tuner hardware is malfunctioning or not installed" but I have installed the latest TV@nywhere drivers from MSI"
Neither the Vox or the TV@nywhere cards are compatible with MCE2005. MCE2005 requires an analogue TV card capable of hardware MPEG2 encoding, or a software DVB-T (digital) card that already receives an MPEG2 video stream over-the-air.
You can however still use the Vox or the TV@nywhere using the MSIPVS software outside of the MCE2005 application.
the only MSI TV products compatible with MCE are the Theater 550PRO and DigiVOX

Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs. What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc. This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system. This happens whether I trying to Play a disc or burn the disc to the hard drive. The drives work great though as they do play DATA discs all the way through. MP3 discs play fine. It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything. Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help. Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

Hi,
All dimms work individually? Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive? I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk? Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
You have some options to consider once you can stablize your PC for updating the BIOS.
Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
Try a bootable BIOS update process as suggested at this site. -- less safe but doable
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Windows XP Media Center Edition FAQ

What is a Media Center PC?
It is basically a regular PC, but designed to fit into your home entertainment system to replace your DVD player, Hi-Fi, TV set-top box, as well as allowing other functions as email, web browsing and more, all from the comfort of your armchair, or elsewhere
Many new Media Center PCs (MCPCs or Home Theatre PCs - HTPCs) are styled like hi-fi components to blend in under your TV, while many are regular PCs with extra multimedia functions.
What is Windows XP Media Center Edition?
Windows XP Media Center Edition (or XP MCE for short) is basically Windows XP Professional (Service Pack 2) without advanced networking support (but including Remote Desktop Connection) and extra applications to turn your PC into a fully fledged Home Theatre PC (HTPC). The main Microsoft Media Center appplication allows a full screen interface suitable for viewing on TVs (pictured below left) and controlled by an easy to use Microsoft remote control device (below right), so you can watch and record TV, view DVDs and listen to audio CDs and digital music files.
How do I get WinXP MCE?
At the time of writing, XP MCE is only available as an OEM pack which you can purchase from your nearest dealer or online reseller, or if pre-installed on a purchased system. MCE is currently only available as a 32bit (x86) version, but works on 64bit systems.
The Media Center application is also included with the Home Premium and Ultimate editions of Windows Vista.
How do I install WinXP MCE?
MCE installs the same way as any other version of Windows XP. However it cannot be installed as an upgrade, you must do a clean install. MCE comes on two disks; a WinXP XP SP2 disc, and the MCE extras disc. Boot from CD1 as you would normally when installing Windows. The setup screens will indicate Windows XP Professional, this is normal. During the graphic part of the install process, you will be prompted to insert CD2. This is obviously the second CD of the set which you should insert, as it contains the necessary extra Media Center enhancements. When it is done, Setup will ask you for the "Windows XP SP2 CD". It is actually just asking for the first disc again, so reinsert it and let it continue.
When install is complete, the system will reboot, and you will see the normal Windows XP desktop, though with a slightly different theme. To begin using the Media Center program straight away, click on Media Center in the Start Menu to begin the Media Center Setup wizard.
What graphics hardware is required for MCE to work correctly?
MCE works with DirectX 9.0c, so ideally your hardware at a minimum needs to be DirectX 9.0 compatible.
MCE requires a minimum of 64mb video RAM (shared or dedicated), 128mb recommended for the full visual "eye-candy" interface effects.
For Nvidia GPU chipsets, MCE drivers can be found here: nVidia Drivers. You'll need at least a Geforce FX5200 for MCE to work (however I have it running on an integrated Geforce 4 MX with no problems).
For ATI GPU chipsets, drivers for MCE can be found here: ATi Drivers. You'll need at least a 9250 for MCE to work, but I understand that the 9200 may also suffice.
Unfortunately, I understand that SiS and Via (S3) chipsets (as found on many mobos with integrated VGA) are NOT MCE compatible. Some Intel integrated VGA chipsets will work now, you should refer to Intel's website for updated drivers. I also understand that Via have introduced MCE compatible drivers for their Epia SP13000 ITX board, again refer to Via's website for correct drivers. However, it is recommended to use an add-in VGA card for best results, unless you have a new board which has integrated Geforce 6100 or ATI Xpress chipsets
What TV hardware works with MCE?
In order to display TV output, MCE requires an MPEG2 stream to display. It cannot encode this itself, so requires a hardware based TV tuner / capture card, such as the Hauppage PVR MCE series, or the MSI Theater 550PRO (above left). The card receives analog video through the aerial connection, or svideo / composite inputs, encodes it into MPEG2 format, which MCE can display.
This type of analog card is required to connect a cable or satellite box (eg Telewest, NTL or Sky in UK). Using the Microsoft remote receiver, two supplied IR blasters affix to the set-top box, so MCE can automatically change channels when needed.
For best picture quality on digital TV though, you can use a software-based DVB-T card, such as the Hauppauge Nova-T or the Black Gold DVB-T (above right). Using a regular aerial, these receive high quality digital terrestrial (OTA) signals (eg the Freeview service in UK), which are broadcast in MPEG2 format, and therefore no encoding is required. In the USA, ATSC is the digital terrestrial standard used, as DVB is not available there.
Unfortunately UK users of DVB-T cards will currently not be able to make use of DVB subtitles, interactive text-based services such as Teletext and BBCi, or listen to the Digital Radio services available on Freeview. UK DVB Digital Audio services are now available with MCE Rollup 2.
Unlike with VGA cards, MCE requires that your TV hardware has special BDA (Broadcast Driver Architecture) drivers which are MCE compatible. Check your hardware manufacturers website for compatible drivers.
Unfortunately, analogue TV hardware that is software-driven (such as MSI TV@nywhere and Vox) won't work in MCE.
Windows Vista Media Center will introduce support for cable (DVB-C) and satellite (DVB-S)tuner cards
Do I need any other software to make MCE work?
As MCE is essentially based around Windows Media Player 10, you will be aware that WMP cannot play DVDs until you install a suitable DVD codec. This is also the case with MCE, as until you install this MPEG2 codec, MCE won't play ANY video (including TV). So you will also need to purchase additional MCE compatible DVD player software, such as Cyberlink PowerDVD 6, Intervideo WinDVD 6, or Nvidia's DVD Decoder MPEG codec. Results can be varied using different codecs, so it is best to try a trial version of such software to see which gives you the best results before purchasing. You may find that suitable DVD software may already be supplied with some VGA or TV tuner cards.
Anything else I need?
You will also require an internet connection (not imperative, but certainly very useful) in order for MCE to access the internet in order to find and download TV guide listings, and album and artist information when playing CDs, MP3s and WMAs.
Without guide information, you will have to manually schedule TV recordings, and no programme information will be available.
If you are planning on having your Media Center in your living room, the Microsoft Remote Controller will allow you to control all aspects of the MCE interface without the need for a keyboard or mouse connected.
If you are connecting your Media Center to your TV, then your video display device will need TV-out capabilities (S-Video or Composite). S-Video offers better picture quality over composite video, but you will need to ensure your TV supports S-Video input, otherwise you will just see black and white video.
If your TV supports RGB inputs, then you may be able to obtain a VGA > RGB adaptor, which offers even better picture quality (search with Google, there are lots of sites about this). Many modern LCD and plasma TVs also support direct VGA / DVI inputs. VGA > RGB/SCART is only compatible with ATI Radeon VGA cards.
Can I watch one channel while recording another?
Yes, but you will need two identical TV devices, eg 2x DVB-T cards. You cannot have one analogue card, and one digital, as MCE presumes both hardware devices receive same channels, and can pick and choose between them. (However in the USA, you may have two analogue tuners, and one HDTV tuner)
This is straightforward when using two identical DVB-T cards. MCE has a channel list and guide data, so for example you are watching BBC1 on one tuner, MCE uses the other tuner to record the other programme on ITV2. Both cards are receiving the same input.
It gets a little more complicated if you want to do the same with a paid subscription service, such as NTL Cable or Sky Satellite in UK. As well as having two matching tuners (although I understand that some companies, including Hauppage, are releasing "dual-tuner" cards) you will also require two set-top boxes, with a subscription for each, as MCE needs to be able to change the channel on each set-top box seperately.
Good links....
Windows XP Media Center Edition 2005 homepage
The Green Button - very good MCE community forum
MCESoft - for all sorts of plug-ins and extras for MCE
XPMCE.com - Windows Media Center forums
ukShazam.com - Media Center help & more
Note: MSI is not responsible for the content of external links[/b]
Look out for me in the XPMCE forums if you need further help!
That's about it for now, hope you find it useful. As I think of (meaning "remember" ) other stuff I'll add it above. If you know something that I've missed out, please post below with as much info as you can, and I'll add it to the guide, with a credit to you!
If you need help to solve a problem or want to ask a question, then START your own thread, with as much info as you can, please do NOT post in this thread, this thread is only for tricks,tips and useful reference info.

For some reason when using the "certified" MCE version of the Forceware drivers, after a short while all the buttons in the menus become "corrupted"
The simple solution: use regular XP/2000 version of Forceware drivers. They still work perfectly in MCE2005, and the graphical corruption doesn't appear.
nVidia Drivers
EDIT: this problem appears to have been corrected in the recent Rollup 2 Update

Can't get Xbox 360 Media Center Extender to work

I am using Windows 7 Ultimate x64. This is a retail copy. I had previously set up Windows Media Center and successfully set up my Xbox 360 as a Media Center Extender.
After a long hiatus of using Windows Media Center, I went to watch a movie in my media library through my Xbox 360. It would appear to initially connect and then show the Windows Media Center loading screen and say "Contacting..." After about 30 seconds, it would display an error asking me to make sure my Windows Media Center PC is turned on (it is). I ran the Windows Media Center network test in the Xbox 360 and it tested fine.
I attempted to delete the Media Center Extender in WMC and set it up again, but it always fails with an error "An error was encountered while configuring your computer for use with this Extender" at the part where it says "Configuring your Extender".
I looked in the Event Viewer under the Media Center section and found event ID 543:
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          3/3/2010 10:13:20 PM
Event ID:      543
Task Category: Configuration
Level:         Error
Keywords:
User:          WILL7\swsander
Computer:      WILL7
Description:
Media Center Extender Setup failed to create the PnP device with ID: uuid:10000000-0000-0000-0200-00125AC6E86F (timed out after 120000ms).
Error: Element not found.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>543</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-04T03:13:20.805493500Z" />
    <EventRecordID>333</EventRecordID>
    <Correlation />
    <Execution ProcessID="9408" ThreadID="9760" />
    <Channel>Media Center</Channel>
    <Computer>WILL7</Computer>
    <Security UserID="S-1-5-21-2626302321-2836749625-3976135476-1001" />
</System>
<EventData>
    <Data Name="ID">uuid:10000000-0000-0000-0200-00125AC6E86F</Data>
    <Data Name="Timeout">120000</Data>
    <Data Name="Error">-2147023728</Data>
</EventData>
</Event>
I also tried turning off the Windows firewall on the Windows Media Center PC, but this had no effect on the outcome. I also tried deleting the Microsoft Windows Media Center Extender Host certificate and restarting the Network List Service, but these steps to did nothing to fix the issue.
I am using the same computer with the same NIC with the same Ethernet cable with the same SOHO router (Linksys WRT54GL) with the same Xbox 360. Any advice would be welcome at this point.

Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:51:55 PM
Event ID:      592
Task Category: Configuration
Level:         Warning
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Your Media Center Extender was set up successfully, but failed to connect (timed out after 180000ms).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>592</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:51:55.176149000Z" />
    <EventRecordID>428</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="15676" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="Timeout">180000</Data>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:54 PM
Event ID:      506
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender account Mcx1-ERIC-PC has been created for the Extender with ID: uuid:10000000-0000-0000-0200-001DD847D7F4.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>506</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:54.615896200Z" />
    <EventRecordID>427</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="9024" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="User">Mcx1-ERIC-PC</Data>
    <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:49 PM
Event ID:      500
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender Xbox 360 Media Center Extender 'uuid:10000000-0000-0000-0200-001DD847D7F4' discovered at address 192.168.1.2.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>500</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:49.155888500Z" />
    <EventRecordID>426</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="9024" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="DeviceName">Xbox 360 Media Center Extender</Data>
    <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
    <Data Name="Address">192.168.1.2</Data>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:36 PM
Event ID:      573
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender found:
ID: uuid:10000000-0000-0000-0200-001DD847D7F4
IP Address: 192.168.1.2
Interface GUID: {d8f53a92-8e85-4d1e-bde0-ba30d9b14449}
NHED type: X02
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>573</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:36.095870300Z" />
    <EventRecordID>425</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="15608" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
    <Data Name="Address">192.168.1.2</Data>
    <Data Name="GUID">{d8f53a92-8e85-4d1e-bde0-ba30d9b14449}</Data>
    <Data Name="NhedType">X02</Data>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:35 PM
Event ID:      581
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender Setup has determined that the Windows Firewall is enabled in the Home profile.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>581</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:35.555869500Z" />
    <EventRecordID>424</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="14828" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:35 PM
Event ID:      575
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender Setup started with the following settings:
Affiliation code: 159
Username: Eric
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>575</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:35.485869400Z" />
    <EventRecordID>423</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="14828" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="AffCode">159</Data>
    <Data Name="User">Eric</Data>
</EventData>
</Event>

How can I convert the metadata tags on my mp4s to xml files so that they can be read in Windows Media Center?

I have a library with almost 3000 movies and TV shows that I have fully tagged. However, I have decided to start using Windows Media Center and it does its metadata tagging through XML files. I wanted to know if anyone could tell me if there was a way to extract the metadata from those mp4s and convert them to a format that WMC could read? Thanks!!!!

iTunes can make XML playlists so it might be all you need, I made a simple one file playlist and exported it from iTunes. The result is shown below. In principle I could delete the playlist and the entry from the library, as long as I don't delete the file, then later reimport the XML playlist file. I haven't tested this particular scenario, but I assume that iTunes will read all the properties as listed unless it can read some kind of tag from the file itself in which case the current value of the tag would take precedence.
What I don't know is what media center would make of this file, or what its files look like, however assuming they have a similar structure that can be decoded then it should be possible to read data from the iTunes library and write out a text file that will make sense to media centre.
Video Test.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Major Version</key><integer>1</integer>
<key>Minor Version</key><integer>1</integer>
<key>Date</key><date>2013-09-26T23:30:26Z</date>
<key>Application Version</key><string>11.1</string>
<key>Features</key><integer>5</integer>
<key>Show Content Ratings</key><true/>
<key>Music Folder</key><string>file://localhost/E:/iTunes/iTunes%20Media/</string>
<key>Library Persistent ID</key><string>CCF046191585EA85</string>
<key>Tracks</key>
<dict>
<key>155170</key>
<dict>
<key>Track ID</key><integer>155170</integer>
<key>Name</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Artist</key><string>Abbott & Costello</string>
<key>Album Artist</key><string>Abbott & Costello</string>
<key>Album</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Genre</key><string>Comedy Clip</string>
<key>Kind</key><string>MPEG-4 video file</string>
<key>Size</key><integer>110483524</integer>
<key>Total Time</key><integer>532096</integer>
<key>Year</key><integer>1950</integer>
<key>Date Modified</key><date>2013-06-19T17:35:18Z</date>
<key>Date Added</key><date>2012-12-01T17:30:57Z</date>
<key>Bit Rate</key><integer>156</integer>
<key>Comments</key><string>www.dvdvideosoft.com</string>
<key>Artwork Count</key><integer>1</integer>
<key>Persistent ID</key><string>5AF2C490D1E065CD</string>
<key>Track Type</key><string>File</string>
<key>Has Video</key><true/>
<key>HD</key><false/>
<key>Video Width</key><integer>1136</integer>
<key>Video Height</key><integer>640</integer>
<key>Location</key><string>file://localhost/E:/iTunes/iTunes%20Media/Home%20Vide os/Abbott%20&%20Costello_%20_Two%20Tens%20for%20a%20Five_%20&%20_Who's%2 0on%20First_.mp4</string>
<key>File Folder Count</key><integer>3</integer>
<key>Library Folder Count</key><integer>1</integer>
</dict>
</dict>
<key>Playlists</key>
<array>
<dict>
<key>Name</key><string>Video Test</string>
<key>Playlist ID</key><integer>1930541</integer>
<key>Playlist Persistent ID</key><string>30BF2769C94F7F29</string>
<key>All Items</key><true/>
<key>Playlist Items</key>
<array>
<dict>
<key>Track ID</key><integer>155170</integer>
</dict>
</array>
</dict>
</array>
</dict>
</plist>
Such files are easier to interpret if opened with Notepad++.
tt2

Decoder error on media center

Similar Messages

Maybe you are looking for