"Decoding" the Destination URL/IP listed in the in Outgoing Log

Is there any way to translate the Destination URL/IP that is recorded in the Outgoing Log file to an actual URL? I would like to know what the actual website is (trying to make sure my kids are behaving themselves), but I cannot figure out how to take the IP address that is listed (EVERYTHING is listed as an IP - no meaningful URLs at all) and visit it.
Any help on this would be appreciated - thanks!

Welcome to the linksys forums. You can go to this website:
http://samspade.org/
Just copy the ip address into the field and it will supply you with information about the website.
Hope this helps, good luck.

Similar Messages

Decoding the Device Event log (LGLG)

Not sure this is the best section to ask in, but...
Is there a document that can help developers decode the device event log (the one you see with Alt - LGLG) ?
We're trying to debug some connection issues and hope to find some help in the log.
Thanks!
Kev

Hi,
You may need to restore or re-issue your CALs.
Detailed steps.
The number of client access licenses may be reset to five in Windows Small Business Server 2003
http://support.microsoft.com/kb/888818/en-us
Hope this helps.
Jeremy Wu
TechNet Community Support

WRT54GL: How do I get the Incoming/Outgoing Logs?

I've enabled the Log function under Administration > Log, but no matter what I do and how long I wait, when I click the Incoming Log or Outgoing Log buttons, I get an empty window with only a table header and a refresh button. Am I doing something wrong?
Also, I was wondering if there is a way to see a list of connected users.
Thanks, Peter

To Peter
The Incoming logs do not work in the original wrt54gl 4.xx.xx Linksys firmware. This is due to a software problem in the iptables-module.
What you can do is load a third party firmware on it.
Greetings,
jchuit
Tarifa firmware
http://sourceforge.net/projects/tarifa/
Message Edited by jchuit on 08-10-2006 03:24 AM

Configuring the Destination URL for the Adobe Document Services

hi all,
I am going through the documentation for "Configuring the Destination URL for the Adobe Document Services " at :
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/560f41ca73d349e10000000a1550b0/frameset.htm
I am not able to understand 7th step
7. Define the user name and password. To find out how to create the user name and password for the Adobe document services, see Creating a User for Basic Authentication in the document Adobe Document Services Configuration Guide. You can find this guide in the SAP Service Marketplace under Quick Link /InstguidesNW04.
In our scenario
We are running NW04s SP11 on 2 machines
1) 32-bit machine with ADS and credentials properly configured on Web AS for Java installation
com.adobe AdobeDocumentServices null (710.20061024154505.342190)
com.adobe AdobeDocumentServicesEjbClientLibrary null (705.20060407121920.289077)
sap.com SAP-JEE 7.00 SP11 (1000.7.00.11.0.20070201154700)
sap.com SAP-JEECOR 7.00 SP11 (1000.7.00.11.0.20070201154700)
com.adobe DocumentServicesBinaries2 null (710.20060629085312.115621)
com.adobe DocumentServicesConfiguration null (710.20061024154505.342190)
com.adobe DocumentServicesDestProtoService null (710.20060821084105.325745)
com.adobe DocumentServicesLibrary null (710.20060629090137.115621)
com.adobe DocumentServicesLicenseDatabase null (705.20051005114147.242570)
com.adobe DocumentServicesLicenseManager null (710.20060929113452.336248)
com.adobe DocumentServicesLicenseService null (710.20060929113452.336248)
com.adobe DocumentServicesLicenseSupportService null (710.20060929113641.336248)

2) 64-bit machine with portal installation on Web AS for Java, with ESS and MSS
sap.com/SAP-JEECOR 7.00 SP11 (1000.7.00.11.0.20070201154700) 20070308153304
sap.com/SAP-JEE 7.00 SP11 (1000.7.00.11.0.20070201154700) 20070308153213
sap.com SAP_ESS 600 SP7 (1000.600.0.7.12.20070314050106)
sap.com SAP_MSS 600 SP7 (1000.600.0.7.4.20070321052655)
sap.com tc/wd/webdynpro null (7.0009.20060804145649.0000) 

Why do we have to create a new user for the server which is consuming the web service? We already have an user "ADSUser" defined for the Web AS server which has ADS services deployed.
I have opened this thread to solve the previous unanswered question I posted on SDN Empty area in place of Interactive form. .
One more thing the adobe print forms of ESS [Total Compensation Statement and Salary Statement] are rendering properly, only the ones with Interactive ability or not.
thanks,
Sanketh

Hello Sanketh,
1. To access the NW04s configuration guide,
 - Go to https://service.sap.com/adobe
 - On the left frame (tree), under Adobe > Media Library > Documentation
 - On the right had pane you will find the link to the NW04s Configuration guide
2. The link that you have mentioned below details the steps required to be carried out on the client machine that consumes the Adobe Document Services. In our case that is the j2ee engine on which your Web Dynpro application is running. It could be the same physical machine with two different j2ee instances hosting Web Dynpro and ADS or it could be two different physical machine or a single machine having a single instance of j2ee engine hosting both the Web Dynpro and the ADS.
You do not have to create a separate username and a password on the consuming machine but you need to configure the Web Service client proxy to point to the ADS (maybe hosted on a different machine) with the username and the password created on the ADS server. As you have mentioned, you have already created such an user on the ADS (ADSUser). This user authentication on the client machine (consuming server - Web Dynpro) would be required at the runtime by the j2ee engine to authenticate itself with the ADS.
Best Regards,
Krish

No destination URL is defined. Use the followind redirect URL in Transactio

Hi,
I am new BSP, I have to display logon screen in my BSP application, i was copied SYSTEM bsp application and tried to run it, but it is throwing error "No destination URL is defined. Use the followind redirect URL in Transaction SICF: /sap(====)/public/bsp/sap/login/default.htm?sap-url= " . Please let us know what has to be done for the same
Message was edited by:
Rams BSP

Hi Rams,
see http://help.sap.com/saphelp_47x200/helpdata/en/33/8351f1f3351c41853ea3508cbef0cf/frameset.htm
and
http://help.sap.com/saphelp_47x200/helpdata/en/1d/13c73cee4fb55be10000000a114084/frameset.htm
It sounds like you have not configured the redirect correctly in the ICF.
Cheers
Graham

NEED A FUNCTION WHICH CAN DECODE THE URL

Hi all,
I am trying to decode the URL which appears in the address link.
Please read the following for more clarification:
On some search engine, I type the search item.
Say Google is the search engine
The search criteria that i gave is
Case 1
"Human Resources"
Resulting URL
"http://www.google.com/search?biw=1003&hl=en&q=Human+Resources"
Expected result after decoding the URL is
Human Resource
Case 2
Seaechitem http:// oracle
Result
http://www.google.com/search?hl=en&lr=&biw=1003&q=http%3A+%2F%2F+oracle
Expected Result after decoding the URL:
http:// oracle
Can anybody suggest me how to achieve this goal using Oracle?
Is there any function/procedure or any utility available to do it?
Thanks in advance.
Himanshu

Hi,
You lucky guy... I did something really close to what you need. I modified the code a bit (there might be some glitches) to match your requirements:DECLARE
     ref1 VARCHAR2(1000 CHAR) := 'http://www.google.fr/search?hl=fr\&biw=1280\&q=http%3A+%2F%2F+oracle\&btnG=Rechercher\&meta=';
     ref2 VARCHAR2(1000 CHAR) := 'http://www.google.fr/search?hl=fr\&biw=1280\&q=Human+Resources\&btnG=Rechercher\&meta=';
     FUNCTION hextodec( h IN VARCHAR ) RETURN NUMBER
     AS
          h2 VARCHAR2( 10 );
          i NUMBER( 10 );
          j NUMBER( 2 );
          d NUMBER;
     BEGIN
          h2 := LTRIM( h, '0' );
          d := 0;
          FOR i IN 1 .. LENGTH( h2 )
          LOOP
               SELECT DECODE( SUBSTR( h2, i, 1 )
                    , '0', 0, '1', 1, '2', 2, '3', 3, '4', 4, '5', 5
                    , '6', 6, '7', 7, '8', 8, '9', 9, 'A', 10
                    , 'B', 11, 'C', 12, 'D', 13, 'E', 14, 'F', 15 )
                    INTO j
                    FROM DUAL;
               d := 16 * d + j;
          END LOOP;
          RETURN d;
     END hextodec;
     FUNCTION strip(samplevalue IN VARCHAR2) RETURN VARCHAR2
     AS
          finalvalue VARCHAR2(1000 CHAR) := samplevalue;
          decimalvalue NUMBER(2);
          pospct NUMBER;
          extract VARCHAR2(2 CHAR);
     BEGIN
          finalvalue := SUBSTR(finalvalue ,INSTR(finalvalue ,'\&q='));
          finalvalue := SUBSTR(finalvalue ,4);
          finalvalue := SUBSTR(finalvalue ,1,INSTR(finalvalue ,'\&')-1);
          finalvalue := REPLACE(finalvalue ,'+',' ');
          LOOP
               pospct := INSTR(finalvalue ,'%');
               EXIT WHEN pospct = 0;
               extract := SUBSTR(finalvalue ,pospct+1,2);
               finalvalue := SUBSTR(finalvalue ,1,pospct-1) || chr(hextodec(extract)) || SUBSTR(finalvalue ,pospct+3);
          END LOOP;
          RETURN finalvalue;
     END;
BEGIN
     DBMS_OUTPUT.PUT_LINE(strip(ref1));
     DBMS_OUTPUT.PUT_LINE(strip(ref2));
END;
/Warning: ESCAPE must be ON in order to do that under SQL*Plus (because of the '&').
Regards,
Yoann.

How to load the destination url of af:goLink component to a REGION?

Hi,
I've a tree in which every node is <af:goLink> component. How to load the destination url of <af:goLink> component to a REGION? Can anyone please tell me whether it is possible or not?
Thanks
-Sukumar

Hi,
Thanks for the reply. I have looked at the blog.
But my scenario is little bit different. I'm not trying to load a JSF fragment page or a JSF page or a html page. I'm trying to load a url page which is not related to the applicaton. Eg: I'm trying to load "www.my.oracle.com" web page in the region. So I must use a <af:goLink> component. Please correct me if i have misunderstood the concepts".
Thanks
Sukumar

REP-52006: Failed to decode the specified URL %

Hi all,
i have converted my reports from 6i to 10g and pass the parameters in the URL but when i pass % in variable it gets the following error message
REP-52006: Failed to decode the specified URL %
please anyone know about that problem
thanks
Najeeb

According to RFC 1738, the Uniform Resource Locators Specification:

<blockquote>
Only alphanumerics [0-9a-zA-Z], the special characters "$-_.+!*'()," [not including the quotes - ed], and reserved characters used for their reserved purposes may be used unencoded within a URL.
</blockquote>

Try replacing '%' with '%25' (Search the web for information on the topic URL Encoding, for details.)

Eric Adamson 
Lansing, Michigan

REP_52006:Failed to decode the specified URL%1

I need to find more information about this report error
REP-52006: Failed to decode the specified URL %1
this error occurs when I attempt to run a report that has multiple bind variables whose initial values are % (wildcard)

Hi Harry
Did you try escaping % with its hex value (25)?
Regards
Sripathy

Could not BER decode the CRL.

Today when I go to build the latest version of an app I am working on (this is the 368th build), I receive the error message "Could not BER decode the CRL.". This occurs during the signing part of the process, I can export an airi file, and when I try to sign with adt, this message is returned. My cert should be good for a few more months, what is the source of this error? I have not found much for information.
Thanks!

We've had other reports of this error. ChosenSecurity (TrustCenter) is having difficulty with their Certificate Revocation List server. Another developer contacted them and reported that they hoped to have the problem resolved soon. In the meantime, you can produce test builds on a machine that is disconnected from the Internet (this is not recommended for public releases).

Encore CS5: The software that's used to decode the media is not available on this system...

Hi guys, I am needing assistance with this matter. I have read up on similar threads (mostly commented on my Bill Hunt), but I fear I may be missing something. Can anyboy please assist me?
Here's the background:
OS: Windows 7 64-bit.
Video footage format: AVCHD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have been running CS4 Master collection for the past year and a half, with minimal hassles in encore (except for the early patch that needed to be downloaded and applied for some or other transcoding error in Encore CS4).
Right, so we bought the CS5 Master collection upgrade, and all applications are running great, except Encore. The moment I have completed editing my hour-long video in Premiere Pro CS5, I "send to Encore" via Dynamic Link. (This is the way I have been operating countless times in CS4. However now, in Encore CS5, the programme opens with all the regular project settings and saving dialogues, but the the moment it looks as though Encore is going get going, it stalls and doesnt respond, forcing me to close and try again.
So I tried the other way around. I restarted Encore, created a new project, in a new project folder, encore opens, and I chose to Import as "new timeline" selecting the Premiere project of choice. This time around, i don't get a crash out of Encore, instead I get the following message:
"The software that's used to decode the media is not available on this system.
Installing the correct decoders for the files you are working with may help to correct the problem."
So I googled the matter, and came up with Bill's response to the same problem (expect the date that it was posted was back in 2009). I am would desperately like to know if there is a solution, a patch, a workaround of some sorts that can help me get back to my usual workflow. I am pretty screwed without encore at this present moment, and the work is piling up. Can anybody help?
Many Thanks,
Matt

I am having the same problem however I end up having hardware error "Sense code 52102"
My video capture is similar to yours except I am using HD (Canon HNV model Legria HV40)
The process takes a long time and I have breaks in my recording to DVD and with no sound - once it completed after 40 hours.
I have wasted over 20 DVD's trying different things.
OS: Windows 7 64-bit.
Video footage format: HD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have not tried what you did buy opening up Encore and importing to new timeline , let me do that and see if I get the same message.

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

Decoding the content (text/plain) for charset "iso-2022-jp"

Hi there,
I am using IMAP protocol to receive new email message and retrieving the contents using java mail API InputStream is = p.getInputStream()
The part content type is text/plain and text/html and charset is "iso-2022-jp"
The contents contain Japanese Characters as well. In my code, I am decoding the contents using charset "iso-2022-jp" to get the actual content (verified by sending the same content using SFTP client built on java mail APIs). The contents are decoded properly in Linux OS but not working properly on Windows OS.
Can anybody help me out the root cause of this problem? The code snippet is as follows
InputStream is = p.getInputStream();// p is Part object
 byte[] bytesJap = IOUtils.toByteArray(is); // org.apache.commons.io.IOUtils
 String decodedBytesJap = decodeBytes(charset, bytesJap);
The content I am getting while deploying the program
on Linux box:
Subject: FW: Japanese characters
聖書に示された神の純粋なみ言葉に基づいて
on Windows box:
Subject: FW: Japanese characters
$B@;=q$K<($5$l$??@$N=c?h$J$_8@MU$K4p$E$$$F(B&
----------------------------------------------

decodeBytes() method implementation is as below
protected String decodeBytes(String characterset, byte[] bytes) throws CharacterCodingException
 CharsetDecoder decoder = null;
 try {
 decoder = Charset.forName(characterset)
 .newDecoder();
 } catch (IllegalCharsetNameException e) {
 } catch (UnsupportedCharsetException e) {
 decoder.onMalformedInput(CodingErrorAction.REPORT);
 decoder.onUnmappableCharacter(CodingErrorAction.REPORT);
 try {
 return decoder.decode(ByteBuffer.wrap(bytes)).toString();
 catch (CharacterCodingException e) {
 throw e;
}

Error could not build a topology to decode the input file

682593 (3088) - exe\logging.cpp:0841: --- START 2014\11\4 5:38:34 AM ---
682593 (3088) - exe\main.cpp:4511: WinSAT registry node is created or present
682609 (3088) - exe\main.cpp:4542: Command Line = winsat formal
682625 (3088) - exe\main.cpp:4314: INFO: The axe results path environment variable is not set. Assuming we aren't running under AXE.
682625 (3088) - exe\main.cpp:4649: INFO: Winsat is not running in AXE mode.
682625 (3088) - exe\processwinsaterror.cpp:0146: ERROR: tried to read resource strings, unknown exception occured
682687 (3088) - exe\main.cpp:4741: > IsFormal=TRUE IsMoobe=FALSE.
682687 (3088) - exe\watchdog.cpp:0113: WatchDogThreadProc Launched with priority 0
682734 (3088) - exe\main.cpp:4860: Watch dog system enabled
682734 (3088) - exe\main.cpp:4875: Main watch dog timer set to 600.0 seconds
682875 (3088) - common\winsatutilities.cpp:1060: PNPID from DX9 call = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
682875 (3088) - common\winsatutilities.cpp:1126: Index [0]: PNPID = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
682875 (3088) - common\winsatutilities.cpp:1150: Matching device PnPID is PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
682875 (3088) - common\winsatutilities.cpp:1126: Index [1]: PNPID = ROOT\BasicDisplay
682937 (3088) - exe\main.cpp:2615: > DWM Running.
682937 (3088) - exe\main.cpp:2622: > turning off DWM.
682937 (3088) - exe\main.cpp:2595: > EMD service will be restored on exit.
682984 (3088) - exe\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
682984 (3088) - exe\main.cpp:2923: > power policy saved.
683171 (3088) - exe\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
683171 (3088) - exe\main.cpp:2944: > power policy set to maximum.
684515 (3088) - exe\main.cpp:0867: > WinSAT info: Version=V6.3 Build-9600.16384
684562 (3088) - exe\main.cpp:1007: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
684562 (3088) - exe\main.cpp:4125: > Power 'execution' request successfully set.
684562 (3088) - exe\main.cpp:1852: > Run Assessment features
684593 (3088) - common\winsatutilities.cpp:1060: PNPID from DX9 call = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
684593 (3088) - common\winsatutilities.cpp:1126: Index [0]: PNPID = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
684593 (3088) - common\winsatutilities.cpp:1150: Matching device PnPID is PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
684593 (3088) - common\winsatutilities.cpp:1126: Index [1]: PNPID = ROOT\BasicDisplay
684640 (3088) - exe\main.cpp:1852: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 1 -alphaw 2 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
684656 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
696296 (3088) - exe\processresults.cpp:4571: > Wrote video memory bandwidth to the registry 3000430
696359 (3088) - exe\main.cpp:2138: > DWM Assessment results processing SUCCESS
696359 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
696359 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
702843 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
702843 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
709234 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
709234 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
716265 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
716265 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta
3
723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta
3
723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0)
-rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0)
-rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
723515 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff
5 -cbufp 6
723515 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
723515 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
723515 (3088) - exe\main.cpp:1852: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
723515 (3088) - mfmedia\mfmediaop.cpp:0508: ps_MFMediaWorkerThread Launched with priority 0
733562 (3088) - mfmedia\mediaerror.cpp:0137: mfmediatest.cpp @ 1555: 0x800705b4 == ERROR_TIMEOUT
733578 (3088) - mfmedia\mediaerror.cpp:0137: mfmediatest.cpp @ 1279: 0x800705b4 == ERROR_TIMEOUT
733578 (3088) - mfmedia\mediaerror.cpp:0137: mfmediatest.cpp @ 388: 0x800705b4 == ERROR_TIMEOUT
733578 (3088) - mfmedia\mediaerror.cpp:0096:Error: Could not build a topology to decode the input file. (p_BuildTopology)
733625 (3088) - exe\main.cpp:2157: > mfmedia Assessment FAILED due to an error
733625 (3088) - exe\main.cpp:4164: > Power request 'execution' successfully cleared.
733625 (3088) - exe\processresults.cpp:4571: > Wrote video memory bandwidth to the registry 3000430
733625 (3088) - exe\processresults.cpp:1421: Skipping HighDefPlayback limit check.
733625 (3088) - exe\processresults.cpp:1547: No D3D10 Subscore. Using D3D9 subscore for final D3D score.
733640 (3088) - exe\processwinsaterror.cpp:0298: Unspecified error 21 occured.
733640 (3088) - exe\processwinsaterror.cpp:0319: Writing exit code, cant msg and why msg to registry
733796 (3088) - exe\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
733796 (3088) - exe\main.cpp:2985: > Power state restored.
733812 (3088) - exe\main.cpp:3000: > Successfully reenabled EMD.
733859 (3088) - exe\main.cpp:3026: > Composition restarted
733859 (3088) - exe\watchdog.cpp:0339: Watch dog system shutdown
733859 (3088) - exe\main.cpp:5204: > exit value = 21.
i accidentally deleted all the formal assessment.xm file
please help me

Hi,
I'm agree with amavhsrma, we do need more information about your problem. We couldn't provide any suggestion with single log file.
Roger Lu
TechNet Community Support

Any function in BPEL to decode the message??

Hi,
I am working on BPEL.I am sending a xml message as input which is getting encoded. Is there any function in bpel which will decode the message and assign to the output.
please help me out of this problem
Regards,
mohamed

Use the java api com.collaxa.common.util.Base64Decoder to decode this.
See also:
base64 conversion
Marc
http://orasoa.blogspot.com

"Decoding" the Destination URL/IP listed in the in Outgoing Log

Similar Messages

Maybe you are looking for