Decoding the output of the Show Status Task

Looking for the definision of the output from teh Show Status task for a DMP in DMM vers 5.2.
Is this just essentially a mib walk of the DMP?

Hi,
Are you using latest patchesets.sh script ?
Regards
Yoonas

Similar Messages

I can't see the show status bar option in iTunes 11

I can't find the 'show status bar' option in the View Option section, it simply isn't there. Also, every time I go to the store, iTunes crashes.

Are you working with Pretest Questions?
Is it happening with specific sldie, can you chekc the slide type and verify again.
Pretest do not allow skin-playbar to appear.
Thanks,
Anjaneai

PO output message (Fax) showing status- incorrectly processed.

Hello,
I'm unable to send the PO output through fax.
Processing status shows- "2 incorrectly processed".
I checked the fax number and necessary configs and are correct. Moreover there are two messages triggered for same Po. one is processed while the other one is getting error.
Can anybody suggest what might be the issue?
Regards,
Nilesh
Edited by: Nilesh B on Jun 1, 2010 12:23 PM
Edited by: Nilesh B on Jun 1, 2010 3:56 PM

Hi Nilesh,
Can you see from SOST how many attempts were made to send the fax? Sounds like the fax number was busy at the time, preventing the fax from being sent. If 2 faxes were created from the same PO, were they both going to the same number? If so, this may be the cause as both would be trying to dial the same number at the same time.
If you try and reprocess the message from SOST does it go through? If so, this is definitely an issue linked to the fax number being busy.
Rob

Button "Show my tasks"

Hi experts,
I would like to get rid off the "show my task" button that is available in some / all documents.
So far I tried customizing using this path:
SAP Supplier Relationship Management --> SRM Server ---< Cross-applicaiton Basic Settings --> Extensions and Field Control (Personalization) --> Control Actions --> Display Standard Metadata Tables for Actions on Header Level
either the button is not there or I couldn't find it.
Alternatively I took a look at WD component FPM_OIF_COMPONENT and View CNR-INFO but couldn't find the button there either.
Who can tell me to hide the button?
Best regards,
Marcus

Hi cg_srm,
what you need to do is to find out what Web Dynpro application and what component configuration is involved. You do this by right clicking on the SRM screen and selecting "more field help".
Then go to SE80 and find the WebDynpro component and the component configuration. If you double click on the configuration you will get a button on the right side of the screen that reads "start configurator". If you click on that an brwoser window opens where you can create an enhancement of the existing configuration (you should not edit the existing SAP standard configuration). In that enhancement you can do whatever changes are necessary, hide buttons, edits texts etc.
Best regards,
Marcus

Use of SHOW MY TASKS button

Hi,
We are on SRM 7. ECS.
I'm confused regarding the use of SHOW MY TASKS which appears in the shopping cart screen.
If I create a shopping cart which needs aapproval by my manager sya USER B,then how can user use the SHOW MY TASKS button to directly approve my cart until and unless he sees the cart in his POWL?
Are there any settings for POWL so that users can see the carts which are peniding for their approval even though they are created by some other user?
Pls advise.

how can user use the SHOW MY TASKS button to directly approve my cart until and unless he sees the cart in his POWL?
SHOW MY TASKS button is not used to directly approve the cart. The approver will not find the cart through POWL, but through his/her UWL (Universal Worklist), which is usually under the tab "Home" >> "Overview" >> "Universal Worklist". The approver can see all the workitems in UWL and click into each document to view and approve from there.
Are there any settings for POWL so that users can see the carts which are peniding for their approval even though they are created by some other user?
There is no setting in configuration so that users can see others' shopping cart through POWL. The POWL showing only the user's own shopping carts (or as requester in the case of "shop on behalf") is the standard feature of SRM.

If for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar. My question is, I do not have this option. How do I get the sync to stop

"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please.

"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please.

What does act/unsup mean in the "show vlan" output

I have 2 same switches with factory default configuration. I found that once those 2 switches are up, the show vlan output is different.
one of the switch shows active in the status column for the vlans 1002-1005, and the other switch shows act/unsup for same set of vlan.
I've delete the vlan.dat file and reboot but the problem is still there.
Why?
Can anyone tell me what is the meaning of act/unsup?

Hi,
The 'act/unsup' is stating that the switch doesn't support TR or FDDI vlans.
Check the versions of IOS on both switches to see if they match.
Regards,
Phil.

Show your tasks in the calendar view - Outlook Web App

Hi,
Is it possible to show your tasks in the calendar view in Outlook Web App 2013 ?
Some explanations of what I want to do :-)
We use Project Server so user can encode their work, this tasks are sync with an Exchange Server 2013 so tasks can be view in Outlook Web App. It's working really fine but we also want that in OWA, tasks are showed in a calendar so users can share what they
have to do.
How can we add the tasks into a calendar or how can an user can easily share what he do ?
Thanks,
Patmol

Hi Patmol,
Tasks are not listed in
calendar in Outlook/OWA, To view task you will have to go to
Tasks folder or view the task
in To-do bar. You can also see the tasks for the day
in calendar folder if you go to Daily Task List. There are no Add-ins from Microsoft that can add
tasks in the
calendar along with Meetings/Appointments.
Thanks,
James

How to capture the Escalation status in Human Task & Update in database

Hi,
I have created a Workflow where I have a humantask. Here if the Approver Escalates the task, I want to capture this Workflow status and need to Update it in the our(Oracle) Database as Escalated. I am Updating the database as Approved when the Approver Approves and Rejected when he rejects. as we can have capture these status. Similarly I want to do for the Escalated status also.
Please Help I have been stuck to this.
Thanks.

No Experts to answer this???????????????????

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

Workflow: Even if PO is released the log shows status as 'In Progress'

Dear All,
I have created custom workflow for PO approval procedure. I have 3 step approval process and have specified same User ID as agent to all 3 levels. Now I am facing below issues in my workflow
1) It is getting triggered twice, I have specified only one start condition as RELEASESTEPCREATED, why is this happening?
2) If I execute the workflow from SWBP for release, even after release of PO the step shows status as 'In Progress' in SWIA, its not going to complete status. Hence not going to next step.
Please guide me on the above issues.
Thanks and Regards,
Aniket

If you are using standard Workflow WS20000075 on releasing the PO a notification workitem is ent to the Initiator which displays the PO. On executing this workitem the workflow instance get completed. This is a standard solution if you need to change it then copy it and customize it accordingly.
Thanks
Arghadip

What does the "Show file status badges" in Slideshow mean ?

Does anyone know what the "Show file status badges" in Slideshow mean ?

Presumably whether the image is online or offline.

Safari status bar disappears. I have tried clicking on show status bar and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page only full screen or close the browser. Any idea how the rectify this

Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?

One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me.

Workflow status column is not showing the internal status values (Inprogress, Started, Suspended, Completed)

I've created SPD 2013 workflow and deployed them onto that document library, This workflow execute on item update event. When updating library item, workflow triggered and completed successfully but workflow status column is not
showing the Internal Status values rather it is showing the Stage information. I've unchecked the "Automatically update stage name on workflow status" and republished the workflow. After that, it is still showing the stage information. Any help
is really appreciated.

Hi Venkadesh,
It is by design that 2013 workflow will show stage name in the workflow status column when
Automatically update the workflow status to the current stage name is checked.
And the workflow status column will be blank when Automatically update the workflow status to the current stage name is unchecked.
For existing workflows, the workflow status will still exists with the previous values after unchecking Automatically update the workflow status to the current stage name.
We can use Set Workflow Status action to update the workflow status value based on our needs.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

JMS Bridges not showing the right status

I am using the weblogic 9.2 MP3 on production servers with around 300 managed servers in 7 clusters. There are around 1200 queues and 2500 JMS bridges connecting the queues to internal and external world.
The JMS bridges on my system doesn't reflect the right status. Sometimes, it shows INACTIVE/Failed status but still keep forwarding the messages.
Different bridge status and description that I can see:
Inactive     Stopped by the administrator.
Active     Forwarding messages.
Inactive     WARN: failed to connect to the target.
Active     Connected to the source.
Also,
I see lots of warnings in the logs as follows...
####<5/03/2013 10:33:33 AM EST> <Warning> <MessagingBridge> <HOSTNAME> <MS NAME> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1362440013003> <BEA-200026> <Bridge "BRIDGE NAME" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was javax.resource.ResourceException: Error setting message listener.)>
<27/01/2013 05:52:07 AM EST> <Warning> <Connector> <BEA-190024> << eis/jms/WLSConnectionFactoryJNDIXA > Error making initial connections for pool. Reason: javax.resource.ResourceException: Adapter internal error -- connectionFactory object is not instanceof ConnectionFactory>
Any help on the issue will be appreciated...
Thanks

what does emctl status dbconsole show?
Hi All,
I have installed 10g in Win 2000. Enterprise manager
was working fine after installation. I restarted the
Oracle Service (DB Service, TNS, iSQL, DBControl)
from services in Control Panel. Database is up and
working fine but the Enterprise Manager is not
working. When I am trying to use the EM through
Internet Explorer, it is not asking for any login and
showing as database as down. I am able to connect to
DB from client PC. Please advice.

Decoding the output of the Show Status Task

Similar Messages

Maybe you are looking for