Decreasing latency and increasing down/up speeds

My latency is usually between 30ms and 50ms. My speed is 2454kbps down and 350kbps up. It's really hard to do some good gaming at those speeds and especially with that kind of latency. I'm running through my wireless router. I'm on a Buffalo WHR-G54S Airstation Wirless-G. How can I decrease my latency and increase my speeds?

I am paying that extra money for the high speed. I should be getting at least 3500kbps/down and around 1200kbps/up. I tested my apartment neighbor's speeds and he tested out at 3200kbps/down and 900kbps/up, (latency only less by about 5ms on average), and we are on the same internet package. He's running on a pc with more than out of date equipment and I know my macbook should kick his pc's butt. Fine, forget the router and the wireless. Being hardwired into my modem, how can I achieve greater speeds and semi-more importantly, how can I decrease my latency time?
P.S. Is there a way to get the speeds I desire while being hardwired into the router? (Reason being because I like to play my 360 online as well, and I'm gettin some semi-bad lag everywhere I go). If not, I'll go hardwired permanently... until I get a better router of course.
Message was edited by: renen1987

Similar Messages

Hi, i am looking to set cells so that when one number decreases the other increases. The catch is that when the first number goes up the other stays the same. And when it starts decreasing again the other builds up. so forth

Hi, i am looking to set cells so that when one number decreases the other increases. So say cell A is at 5, and cell B is at 0. When Cell A goes to 4, Cell B goe to 1. The catch is that when Cell A gets down to 1, and i change it to 5 again, Cell B will be on 4 and start incresing from that point on when cell A decreses. This is to show an amount of sales within a company when stock is sold.
Example:
A = 3
B = 0
A = 2
B = 1
A = 1
B = 2
A = 3
B = 2
A = 2
B = 3
A = 1
B = 4
A = 3
B = 4
A = 2
B = 5
Sorry if this sounds confusing.
Many Thanks,
Oliver

Can't be done, in a single cell, for the reasons given by Jerry.
But not difficult in a column:
I've moved the columns one to the right to put them in the body cells of the default Numbers table.
Current stock is listed in column B, with results of increases and decreases entered manually. Any increase is assumed to be a restocking, and does not affect the sales to date figure in column C. Any decrease in stock is regarded as a sale and increases the current total in column C by the amount of the decrease.
Until an entry is made in B, the corresponding cell in B will show a hyphen. This can be changed by changing the text between the quotation marks in the formula.
Enter the formula into C3 and Fill it down the rest of column C.
Regards,
Barry

I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns. How do I decrease the height of the column. Have tried to use cursor and drag down the top border, but that does not reset the top border.

I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns. How do I decrease the height of the column. Have tried to use the cursor and drag down the top border, but that does not reset/decrease the top border.

Set your columns back to one for the moment. In layout mode, insert a Text box. Place it in the upper left corner of your document, and drag down and right to the size of the container for your two columns. Click inside the Text Box, and now bump up your columns to 2. Your two columns are now contained in this resizable Text Box.

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

How do I decrease the start up and shut down time?

Processing pin wheel becoming more prevelant an time for start up and shut down is increasing.

Start by using this utility that is already on your Mac:
Using Activity Monitor to read System Memory and determine how much RAM is being used
What Mac OS X are you using?
How much Green in the pie chart? How much Blue?
How many pageOuts since last startup?

Increasing the Upload and if possible download speed of Linksys X3000

Hi I'd like some assitance in increasing my download an dupload speeds of my Linksys X3000.
Mian reason I want to increase them for include:
1- TwitchTV hardly ever loads properly for me, what methods can I go about to make it stream normally?
2- Here's my SpeedTest results:
http://www.speedtest.net/result/2820023231.png
I'd like to increase my upload speed as I never manage to get a good connection with friends from the mid east and in europe and USA when I play on my PS3. As is, my upload speed based on the PS3's Network Test is between 0.5-0.7 MBPS but never goes higher than that.
What options should I alter in 192.168.1.1 to get the desired results?

Port forwarding or on turning on DMZ would help if your issue is regarding unable to connect to server and the like. If your concern is regarding slow download and upload speed, then you need to ask your internet server provider if how much speed they are giving you. In the event that the problem is with the router then you can try the following:
Upgrade the router’s firmware
Reset the router
Check this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re... to know on how to change the router’s mtu size
Enable QoS and prioritize your PS3 for faster connection

On iMovie for iPad2, is it possible to speed up and slow down voices?

On iMovie for iPad2, is it possible to speed up and slow down voices? (in order to sound like a chipmunk for example) I know that it can be done on a Mac, but what about iPad?

It it possible to speed up or slow down music from my iTunes file?
http://www.bulletsandbones.com/GB/GBFAQ.html#changeimportedtempo
(Let the page FULLY load. The link to your answer is at the top of your screen)
cut
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)
blend
open GB's help and search for "curve"
I am using music from my iTunes.
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)

Can anyone tell me how to increase the text size in my menu bar and drop down menus?

Just bought a new 27" screen iMac. The menu bar and drop down menu text is much to small for me to see without leaning close to the screen. Does anyone know how to customize the text to a larger size. This is an issue for any program I open.

Once upon a time Apple displays packed in 72 dots to an inch (making their resolution 72 DPI). That meant that what we saw on screen at 100% scale was exactly what was printed on a printer - not to mention quite comfortable to read. However that advantage was eclipsed by the fact that photopgraphs and video were pixelated and the only solution to that was to increase the resolution - to pack in more dots per inch - which has the side effect of shrinking the size of text. Where I once used Word at 100% scale I now find it most comfortable at 150% scale.
There are several solutions. One, as Lex gave you, was to reduce the resolution of the LCD display. But unlike CRT displays, an LCD is tuned to a specific resolution and when you change it the results tend to be blurry. Another is to keep the resolution as it is and to adjust each program (if the program allows it). This makes Word usable and your browser can be set to use no font smaller than a size you set (which has some unpleasant side affects at some Web sites), but some programs and some parts of programs cannot be changed. The menubar and menus are among them. The third solution is one that Apple promised several years ago but has not yet provided - a resolution independant GUI. We can only hope that comes soon. And there's another partial solution - look in System Preferences under Accessibility.

Speed up and slow down tracks

I need a program that I can speed up and slow down tracks with. Is that possible in Logic Express? I know that it can be done in Logic Pro, however I don't need quite that much program.

xcuse me if i jump in here without answering the original question, but that brings up something similar to me:
if i have a setup in the arrange with a combination of various audio-files, apple loops and midi-tracks, and i want to record something additional into that (midi over connected edirol midi-keyboard): can i slow down the whole song, just to make it easier to record the new part without destructively destroying anything?
and after that just go back to the original song-tempo?
thanx a bunch for any thoughts!
again, sorry balletboy for jumpin in here, hope that is ok for you :o)

Really stuck with speeding up and slowing down clips

Hi gang,
I have been reading the Final Cut manual for the last hour and fooling around with my clips, but I can't get the effect that I want.
I have a clip (CGI of a star field moving towards the observer) that I want initially to be frozen, then I want the clip to accelerate rapidly, and then end at about double normal speed. I thought I would be able to use keyframes and specify the playback rate at given points, but that option doesn't seem to exist. I have been playing with variable and constant speed settings, but these don't seem to work either.
Ideally, the clip would go like this:
1) first frame of original footage is frozen for 2 seconds.
2) the original footage then begins playing, accelerating rapidly from frozen to double speed over 2 seconds.
3) remainder of original footage plays at double speed until complete.
I feel like I am missing something obvious, but I can't get it to work!
Any suggestions appreciated.
Cheers!

Dude, I have the same problem. I found a picture/text tutorial on how to slow down, speed up and reverse all in one clip w/o chopping it up, but it was for FCP 4. I have 5 and when I ramp the green line down it speeds up, doesn't slow down. Is it just me or is the effect changed from FC4 to FC5.
I'm looking for a great video tutorial for FC5 or similar on how to slow, speed up and reverse a clip using the Time Remap Tool in FC.
If it's a DVD I have to buy so be it.
Thanks everyone.

Speeding up and Slowing down Clips

I know how to do this on the older versions of imovie, but this new layout is useless. Anyone know how to speed up clips? Im so confused!!!!!!

Dude, I have the same problem. I found a picture/text tutorial on how to slow down, speed up and reverse all in one clip w/o chopping it up, but it was for FCP 4. I have 5 and when I ramp the green line down it speeds up, doesn't slow down. Is it just me or is the effect changed from FC4 to FC5.
I'm looking for a great video tutorial for FC5 or similar on how to slow, speed up and reverse a clip using the Time Remap Tool in FC.
If it's a DVD I have to buy so be it.
Thanks everyone.

I have ios5 on iphone 4, but it makes iphone too much slower, release update to improve phone speed, when i touch home button, it have slower reaction, too while i scroll in menu and shuting down the applications, infinity blade is frozing

i have ios5 on iphone 4, but it makes iphone too much slower, release update to improve phone speed, when i touch home button, it have slower reaction, too while i scroll in menu and shuting down the applications, infinity blade is frozing during video game parts and during playing its 3 or 4x slower reactions, make update for ios5 please,
- reminders are ok
- camera- perfect
- newstand - perfect
- icloud too

Hi
I have a iPhone 4S this is not siri it is actally something to help those who have some sort of disability by reading the screen you can disable this by going to general then go to the bottom to accessability
Hope this helps you

Checked my TW Road Runner Down & Up speed and performing fine. FF is hanging, disconnecting, slow, etc... What to do ?

Checked my Time Warner Road Runner Down & Up speed and performing fine. Fire Fox is hanging, disconnecting, slow, etc... What to do ?

At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.
DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.149.160.49 behind the scenes.
These Servers have been patched to guard against DNS poisoning, and are faster/more reliable than most ISP's DNS Servers.
For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.

I was listening to an audiobook and somehow managed to speed up the reader, How can I slow the reader back down to a reasonable speed?

I was listening to an audiobook and somehow managed to make the reader talk faster. How can I slow the reader back down?

On the right side of the playing screen right below the scurbber bar is the speed setting box. It has 1/2X, 1X or 2X, the playback speeds. Tap the bax to change and cycle through the speeds.

GE60 fan problem. speeds up and slows down constantly [EC reset done]

My model is GE60 OCN and bios and EC is the newest ones for win7 embeded on msi website.
I have the same problem with others if you search here 'ge60 fan'.
The temperature between 50~60℃ the fans runs slow and really quite.
But if the temperature goes down under about 46℃, it speed up and slows down constantly and it is annoying and much noiser.
I think msi should provide new EC firmware for this. Even the temperature is low, it annoys and nosier than when the temperature is between 50~60℃.
Please check this problem and provide new EC firmware for fan policy.
Someone has uploaded video link: youtube.com/watch?v=OQjjjVOpsEQ
this is exact problem with me as well.

I have exactly the same problem. Let's continue in the other thread (https://forum-en.msi.com/index.php?topic=165613.0)

Decreasing latency and increasing down/up speeds

Similar Messages

Maybe you are looking for