Decrypt errors occurred for client
I am getting error messages for clients:
11 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:13:ce:54:57:3c using WPA key on 802.11b/g interface of AP 00:16:9c:91:97:c0
12 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:16:6f:91:d8:60 using WPA2 key on 802.11b/g interface of AP 00:16:9c:91:97:c0
These are only occuring for clients that are disconnecting....
They can reconnect after a WLC reboot....
We have swapped APs.....
I have seen this error in other forums but it says not to worry about it. There has to be a connection between this and clients getting disconnected. We have anywhere between 10-50 clients on the system at any one time.
Is this a client issue (nic firmware, version) or is this an error in the controller??
AIR-WLC2106-K9
IOS ver: 6.0.196.0
Thanks
This means that the client is using a different key than the one he agreed on using with the AP. There were bugs about this long time ago but nothing recent.
I've seen this happening a lot with old/not updated clients. It rarely happens on intel adapters with latest drivers for example.
So I'd suggest checking the client pattern (are the clients facing this all having old wireless drivers ?).
It can also happen if you offer funny encryption combinations that client doesn't like (wpa1+aes, wpa2+tkip). Try to only enable wpa2/aes and see if it helps.
Nicolas
Similar Messages
-
Decrypt Errors occuring in WLC Log
Hi all,
we see a strange message in our WLC logs, which occurs quite often (>10 times a day):
Decrypt errors occurred for client [MAC-Adress] using WPA key on 802.11b/g interface of AP [MAC-Adress]
The MAC-Adresses of the affected clients are varying as well as the APs reporting the error.
The clients are Notebooks, Cisco IP-Phones and Nokia-DualBand-Phones.
Even more frequently we see the following message in the log:
%ETHOIP-3-PING_TRANSMIT_FAILED: ethoip_ping.c:227 send_eoip_ping: Failed to tx Ethernet over IP ping rc=5.
We use TKIP as Encryption and EAP-Fast as well as LEAP as Authentication (Cisco ACS).
The WLC is an 2106, the APs are 1242AG.
We don't recognize any problems placing calls or talking over these phones. It's just these messages in the log that concern me.
Anyone else got these messages (and hopefully fixed them :))
Greets,
SebastianHi Everyone, you can count me in as well for getting the decrypt errors. However the only difference is that I'm not using WPA on the network that this is happening on. The wlan that is reporting this for me is just a simple WEP key. I'm thinking this is related to encryption since TKIP is also based on RC4. I also have other WLANS where I use WPA2 Enterprise with AES (PEAP MS-CHAPv2) and I do not see the decrypt errors for those clients. Also, to further expand on this I haven't noticed any client problems either. Maybe this is a bug that doesn't cause denial of service. I'd love to get rid of them though! This is with a 4402 WLC and 1242AG AP's...
-
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
Environment: ZFD4
Windows OS: 2000 Professional Sp4
Novell Client: Tried both: 4.83SP2 and 4.91SP3
Zenworks Server: NW51 SP6
I successfully created a NAL object for an application called Delphi from
a company called NewMarket. The Application utilizes an SQL database and
runs off a Windows 2000 server. We already have one NAL object for this
application which works fine. The new object I created is for a newer
version of this appliction.
I have compared all the settings, and parameters of the new object with
the old one and all are in identical. I am not entirely sure of every
registry or INI entry though.
On trying to deploy the object, the files and registry entries of the
application seem to get copied to a point from what I can see but then it
always ends up with this error: " Unknown error occurred for application
DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
I did a search for this error off Novell's knowledge base but came up
empty.
Any thoughts about what could be the problem?
Will greatly appreciate any help with this.
Thanks very much
KennethOriginally Posted by Craig Wilson
Export the object as an "AXT" file and mail to
Craig_D_Wilson at yahoo dot com
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
"Kenneth " <[email protected]> wrote in message
news:_vl0i.484$[email protected]..
> Environment: ZFD4
> Windows OS: 2000 Professional Sp4
> Novell Client: Tried both: 4.83SP2 and 4.91SP3
>
> Zenworks Server: NW51 SP6
>
> I successfully created a NAL object for an application called Delphi from
> a company called NewMarket. The Application utilizes an SQL database and
> runs off a Windows 2000 server. We already have one NAL object for this
> application which works fine. The new object I created is for a newer
> version of this appliction.
>
> I have compared all the settings, and parameters of the new object with
> the old one and all are in identical. I am not entirely sure of every
> registry or INI entry though.
>
> On trying to deploy the object, the files and registry entries of the
> application seem to get copied to a point from what I can see but then it
> always ends up with this error: " Unknown error occurred for application
> DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
> I did a search for this error off Novell's knowledge base but came up
> empty.
>
> Any thoughts about what could be the problem?
>
> Will greatly appreciate any help with this.
>
> Thanks very much
> Kenneth
>
I had the same type of error and found that the version of snapshot was different then the version of zen on our network. When I matched the two versioin the snapshot worked perfect. Hope this helps. -
FRM-99999: A network error occurred, the client will not...
Hi Folks,
I'm getting the below Forms error message appears as an alert,
while loading it in a browser using static HTML.
====
FRM-99999: A network error occured, the client will not be able
to continue.
Details...
Java Exception
java.net.SocketException: Socket read failed|
|at java/net/SocketInputStream.socketRead|
|at java/net/SocketInputStream.read|
|at oracle/forms/net/EncryptedInputStream.fill|
|at oracle/forms/net/EncryptedInputStream.read|
|at java/io/DataInputStream.readUnsignedByte|
|at oracle/forms/engine/Message.readDetails|
|at oracle/forms/engine/Message.readDetails|
|at oracle/forms/net/StreamMessageReader.run|
====
If you have any solution for this problem, Pls mail me.
Regards
Ramasundaram
([email protected])
nullErik Martens (guest) wrote:
: Ramasundaram Perumal (guest) wrote:
: : Hi Folks,
: : I'm getting the below Forms error message appears as an
alert,
: : while loading it in a browser using static HTML.
: : ====
: : FRM-99999: A network error occured, the client will not be
: able
: : to continue.
: : Details...
: : Java Exception
: : java.net.SocketException: Socket read failed|
: : |at java/net/SocketInputStream.socketRead|
: : |at java/net/SocketInputStream.read|
: : |at oracle/forms/net/EncryptedInputStream.fill|
: : |at oracle/forms/net/EncryptedInputStream.read|
: : |at java/io/DataInputStream.readUnsignedByte|
: : |at oracle/forms/engine/Message.readDetails|
: : |at oracle/forms/engine/Message.readDetails|
: : |at oracle/forms/net/StreamMessageReader.run|
: : ====
: : If you have any solution for this problem, Pls mail me.
: : Regards
: : Ramasundaram
: : ([email protected])
: To troubleshoot your Developer 6 Server
: WinNT
: ifsrv60.exe -listen port=9000
: Unix
: $ f60ctl start pool=10
: $ ps -ef | grep f60
: oracle 24713 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=7,2,(null)
: oracle 24714 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=8,3,(null)
: oracle 24719 24709 2 10:35:49 pts/4 0:01 f60runw
: webfile=13,8,(null)
: oracle 24712 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=6,1,(null)
: oracle 24718 24709 2 10:35:48 pts/4 0:01 f60runw
: webfile=12,7,(null)
: oracle 24715 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=9,4,(null)
: oracle 24717 24709 2 10:35:48 pts/4 0:01 f60runw
: webfile=11,6,(null)
: oracle 24709 1 0 10:35:47 pts/4 0:00 f60srvm
port=9000
: pool=10
: oracle 24720 24709 2 10:35:50 pts/4 0:01 f60runw
: webfile=14,9,(null)
: oracle 24716 24709 2 10:35:48 pts/4 0:01 f60runw
: webfile=10,5,(null)
: oracle 24711 24709 2 10:35:47 pts/4 0:01 f60runw
: webfile=5,0,(null)
I have got the same problem and I do not know how to troubleshoot
Developer 6 Server with ifsrv60.exe -listen port=9000 command. I
am working on WinNt server. Can any one help me.
Thanks
null -
Two days ago I noticed a noise my MBP started to make all by itself, it started basically right after I changed the sync contacts option in iTunes for my iPhone to sync my contacts along with my gmail contacts. I've changed it back since then but it continues to make the noise and log file error entries are still posting. Below is my error log file for this issue from the first instance to the last one. Can someone please tell me how to fix this?
5/6/12 5:36:55.323 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. Socket is not connected
5/6/12 5:36:55.338 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 5:36:55.343 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:19:08.556 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152ab60>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:31:36.063 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. Socket is not connected
5/6/12 6:31:36.077 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab5a350>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:31:36.085 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab5a350>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:37:38.014 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:37:40.525 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152cd20>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:16.042 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. Socket is not connected
5/6/12 9:16:16.065 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab4bf30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:16.070 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:17.575 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab5a350>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:18.597 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab58270>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:44:10.355 AM applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
5/7/12 7:59:36.004 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. Socket is not connected
5/7/12 7:59:36.065 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:36.096 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab5d240>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:36.520 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:39.044 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:41.177 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab7f8d0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:43.695 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab7f8d0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 8:51:48.271 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab67f60>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 8:51:48.272 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:16:30.061 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab4bf30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:17:37.165 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. Socket is not connected
5/7/12 9:17:37.172 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6c0b0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:17:37.188 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:20:19.760 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. Socket is not connected
5/7/12 10:20:19.766 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:20:19.775 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:20:19.781 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:21:47.436 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:21:47.671 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 1:45:59.140 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6e570>: The operation couldn’t be completed. Socket is not connected
5/7/12 1:45:59.155 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 1:45:59.243 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73150>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 1:46:00.308 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 2:09:38.352 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. Socket is not connected
5/7/12 2:09:38.394 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 2:09:38.414 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 2:09:39.301 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:34:43.403 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. Socket is not connected
5/7/12 5:34:43.430 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:34:43.447 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:34:45.952 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:20:48.145 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. Socket is not connected
5/7/12 6:20:48.169 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:20:48.178 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:20:48.184 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61553e50>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:33:59.398 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab58660>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:34:01.913 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:57:20.569 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab66ab0>: The operation couldn’t be completed. Socket is not connected
5/7/12 6:57:20.583 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 8:11:38.386 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:14:13.280 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. Socket is not connected
5/7/12 9:14:13.298 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:14:13.311 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:14:14.076 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:23:52.792 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615479b0>: The operation couldn’t be completed. Socket is not connected
5/7/12 9:23:52.809 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab58270>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:23:52.828 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab58270>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:01:40.292 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. Socket is not connected
5/8/12 1:01:40.307 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:01:40.312 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab3fe30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 2:49:58.175 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab3fe30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:31:59.322 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:32:00.256 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:32:01.763 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:32:02.767 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:10.243 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615479b0>: The operation couldn’t be completed. Socket is not connected
5/8/12 6:02:10.268 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615479b0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:10.323 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab3fe30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:12.129 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61554bf0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:14.638 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61554bf0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 10:58:53.278 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. Socket is not connected
5/8/12 10:58:53.307 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 10:58:53.315 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:41:08.131 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. Socket is not connected
5/8/12 11:41:08.152 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:41:08.249 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615168f0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:41:09.746 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:46:54.727 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab63590>: The operation couldn’t be completed. Socket is not connected
5/8/12 11:46:54.740 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab63590>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:46:54.746 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:55:41.541 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:55:44.051 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab66ab0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)I get same error, i was trying to, understand why the host in my Terminal was "HOST139cddb40e29 " and not "MacBookHouse", then after the same error you get i see this two lines, just after:
21/06/12 13:05:22,371 configd: network configuration changed.
21/06/12 13:05:22,747 configd: setting hostname to "HOST139cddb40e29"
May be make some sense to somebody. i will see... -
Error occured for "APP-PO-14090: Document was not created
Hi All,
Can anbody please help for the error occured as
"APP-PO-14090: Document was not created", while creating purchase order through Auto create feature in Purchasing Module.
So request you please help me.
Thanks for your response in advance.
Thanks & Regards,
Ram.VHi All,
Thanks for the replies, I found the sollution.
for further references here I am providing the sollution.
The issue happens when ship to bill to location is there but the organization is not given in the location definition form while defining the location. In order to reference the organization to location please perform the following steps:-
1. Go into the responsibility: India Local Inventory
2. Navigate to Oracle Inventory > Setup > Organizations > Locations > Query Location
3. Navigate to Other tab and provide the name of organization. Save changes.
4. Retest the issue.
5. Migrate the solution as appropriate to other environments.
Thanks & Regards,
Ram.V
Edited by: 901012 on Dec 11, 2011 11:31 PM -
Error occurred for the accounting cockpit
Hi.
When I tried to change the tab to "accounting" , there is error message display as the next.
"Error occurred in the accounting- see the accounting cockpit (cproject)"
By the T-code "COCPCPR", I found the internal order with the error meeages.
"No the settlement rule exists for object number OR0000600000"
Would you please give me some input for how to fix or some guideline about the linkage between cproject and internal orders.
Thank you a lot.
Best regards,
EdwinHello Edwin,
As per your error message, the Internal order has been created, however a settlement rule has not been assigned to the IO. I'd recommend you to check the settings of the model order (if you are using any). Also, take help from the CO consultant of your team to assign a settlement rule to this Internal Order.
Let me know if this helps.
Regards,
Vivek -
Why does a Login Error occur: "AFP Client wants to use Keychain Login"?
I have three people in my house with separate logins. We are currently using two desktop G4s which are networked via 1000 Base T. When the users login to one of the Macs, they must enter their passwords twice. Once for the AppleShare login and then a second time for the KeyChain Login.
If I attempt to unify the passwords, which are exactly the same, I will get a login error: "AFP Client wants to use Keychain Login". At this point, a dialogue box will appear looking for a password, but not accepting any kind of text at all. All I can do is reset the Mac, go into my admin login and remove the login.keychain file from the local Library folder to get back into the User account.
In my attempts to fix this, I have removed every preference file with the word "login" in it and re-logged in without success. I have also used the Keychain Access software to administer Keychain First Aid without success. Finally, I have deleted the keychain login in Keychain Access without success. I have done all of these separately and together without success.
This is only happening on one Mac. The Mac that has no files on it. All working files are stored on the other Mac and it does not have the same problem at all.
This is not a huge problem, but it is annoying. I would appreciate it if anybody knows anything about this and could shine some light on the situation.Sorry about the delay from your last reply. I have been busy with work and studying for a licensing exam.
Anyway I tried the AppleJack Utility you suggested. It looked like it tidied up some things. But as for my particular issue, it did absolutely nothing.
Interestingly enough, you know when you aren't looking for something and that something just happens by accident? When I logged in the other day, I typed in the first login. The second dialogue came up immediately and I hit the cancel button instead of the OK button. When I was passed on to the Finder, the second login dialogue came up again. I typed in the password this time and checked the checkbox. When I relogged in, the problem vanished. I only waited this long to let you know to make sure the problem is gone and it is. I wish I would have thought of selecting the cancel button before. Sometimes solutions are simple like this one.
Thanks for your help. -
Error occured for transaction IW31
Hi all,
I am doing upgrade project from 4.6 C to ECC 6.0
when running the transaction code IW31 i got the pop up window stating " Bussiness transaction cannot be carried out".
The parameters as follows:
Order Type MIT1, Functional Location 9001827-00130054-MS-001, and Planning Plant 3001
But in development client this error is not coming it is coming in quality.
How can i solve this error.
Regards
JaiAnswered
-
Error occured for the data source 0uc_isu_27
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Incomplete control parameter for commmunication wi
Hi everybody,
At the time of loading data in to the BW side for the datasource i got an error message.Actually in the source system this data source is extracting the data records. But in the BW side it is giving error. Please help me on this issue. Here i am mentioned the error message actually i got...
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.Hi Dinesh,
I observed at R/3 side it is showing the error
Error message text:
Incomplete control parameter for communication with the BW system
status text:
Application document not posted
Coming to BW side it is giving at RSRQST:
IDOC sent to R/3 system or external program
Status text:
IDOC sent to R/3 system or external program
Thanks
Satya -
Error occur for wrting TDSM file
Hi, all
I try to generate a set of random data and save it into a TDSM file. Is this correct? When I open the TDSM file, nothing is there.Why are you using a Timed Loop? These are typically reserved to Real-Time operating systems and should not be used for non-deterministic operations such as writing to disk.
What error are you receiving?
You may want to specify the extension for the file, e.g. C:\Test.TDMS
Craig H. | CLA | Systems Engineer | National Instruments -
Check for updates error occured for 10.1.3.2 Jdev
Hi:
I try to install clear case extension for JDEV 10.3.1.2 and I am getting "Connect Timeout: Connect." error message below. I check my JDEV-->Preference ---> Proxy setup and it looks okay. Where should I check for the connection issue?
Thanks,You can get the file from here:
http://www.oracle.com/technology/products/jdev/101/update/center.xml -
My computer will randomly fill my desktop with finder files, numbers and pages files and around 60 untitled folders. I pulled the error from the system logs, that is what is showing there. Does anyone have any ideas?
I am with you. I keep getting the message every ten minutes and sometimes several times at ones. I have not found any explanation.
-
Hi
We've got a wireless implementation with Wisms and 1142 LAPs and for a while we've been getting decrypt errors and like other posts here say, I've been ignoring them because they haven't been disconnecting clients but now they are getting disconnected. Errors like the one below seem to be causing the client to be disconnecting:
Decrypt error occurred for client 'xx:xx:xx:xx:xx:xx' using 'WPA' key on '802.11b/g' interface of AP 'xx'. - Controller Name: WLC-1
Its happened to 3 out of 5 laptops in one location plus an iPhone 3GS in another location, all the laptops are the same model and on the same versions of of drivers.
We're on 6.0.188.0.
Any suggestions on what to do?
ThanksHi Megz,
This is cosmetic :)
DECRYPT_ERROR_FOR_WRONG_WPA_WPA2
MIB Name
CISCO-LWAPP-DOT11-CLIENT-MIB. CiscoLwappDot11ClientKeyDecryptError.
WCS Message
Decrypt error occurred at AP with MAC "{0}" running TKIP with wrong WPA/WPA2 by client with MAC "{1}."
Symptoms
The controller detects that a user is trying to connect with an invalid security policy for WPA/WPA2 types.
WCS Severity
Minor.
Probable Causes
The user failed to authenticate and join the controller.
Recommended Actions
None.
http://www.cisco.com/en/US/docs/wireless/wcs/4.1/configuration/guide/wcsevent.html#wp1150053
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf95ef/0#selected_message
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cbf340f
Hope this helps!
Rob
Maybe you are looking for
-
Is it possible to upgrade/add a graphics card to a Pavilion dv7-7000 laptop?
I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Pavilion dv7-7025dx laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card. Mostly I've come acr
-
Messages not saved in Adobe Send
I'm not finding any way to access the messages that were sent to recipients in Adobe Send. I can access the files that were sent and see who they were sent to and the date they were sent, but I'm unable to find the messages that were written to the
-
Sql database connection in jsp
Hi, I am new to java. I know how to connect the database in the java using the javacodings [jdbc] but i am don't know how to connect the database using the jsp. Is it easy. If so, can any one help me in this regards. Any sample codes or white paper a
-
Hi Gurus, We have a requirement for while run the transaction code ABAON put a validation for 1. Transaction type 206 = If Posting Year(ABAON screen field) Less than or equal to Capitalized Year(ANLA-AKTIV from the Asset entered); transaction will r
-
Someone please help me with mac & Elements 3.0
I'm a aged computer novice, so please be gentle with any answers (treat me like a 1st year school child when answering ) I run Elements 3.0 and have just purchased a Macbook pro, running Snow Leopard, because my children said its user friendly. I hav