Decryption of Account Number Send By Third Party System
Hello,
We are processing CSV file sent by one of Third Party System.
Earlier we used to receive plain text account number in this CSV file. For this month, Third Party System has sent this Account Number in Encrypted Format.
My Question is how can I decrypt this Account Number so as to get it converted in Plain Text ?
If I get Private Key / Shared Key used by Third Party system for encryption, How can I use it in People code so as to decrypt the account number ?
Thanks in Advance.
Atul.
Hi Ram,
of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
<soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
which is the actual adress of the service.
An example service can be found here:
<a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
containing the WSDL URL at
<a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
have fun,
anton
Similar Messages
-
Account Assignment Category for third party process.
Hi ,
I would like to use different account assignment category for third party process. This account assignment cat must be assigned at the sales order itself. Is there any config for this.
Kindly help me.
Ram.You can create new account assignment category for 3rd party process by copying existing std one 2 in configuration under MM - Purchasing - Account assignment - maintain account assignment category
You can assign your own set of control for account assignment based on requirement.
SAP use TAS item catgory in 3rd Sales order which is linked to Pur Req account assignment catgory 2.If you are defining own account assignment catgory than you need to config set-up with TAS sales order item catgory.
Hope above details will help to move further...sanjay karkun -
Integration with PF Accounting module Third party system
Dear All,
I want to integrate SAP with PF Accounting module third party system. Since i dont have any idea about it kindly do the needful. It woud b appreciable if anyone let me know the information .
Regards
Suresh.v
Removed_ ModeratorHi,
Please use "Interface Toolbox". It is native SAP tool to integrate SAP HCM with third party systems.
Here you learn more about it and how to use it:
http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/PAXX/PYSOME_INTERFACE.pdf
Cheers -
How to configure https to send wsdl file to third party systems
Hi Experts,
instead of using http, i need to use https. so for this in xi system what steps do i need to follow to send wsdl file to any third party systems. here iam using pi 7.1 as a xi system.
please help me in this.
thanks
jas>> to send wsdl file to any third party
In no communication you send wsdl to third party. You always send related http message.
For HTTPS, in the receiver channel, use HTTP Destination.
Goto sm59 in PI and create RFC destination type G. There under "Logon & Security", set SSL as Active.
For this to work, certificates should be imported on ABAP stack using STRUST.
Regards,
Prateek -
Enhancemnet in the include RV03VFZZ to send request to third party system
Hi Experts,
I am using Enhancemnet in the include RV03VFZZ to send the request to third party system(ADEXA) and get the response using proxy and place that in the sales order.
If there is no response from ADEXA system means 'reason for rejection' field has to be filled with some reason. Now I want to know which is the structure that updates the 'reason for rejection field'. the screen field is VBAP-ABGRU and program name is SAPMV45A.
help me in updating the 'reason for rejection field'.
Regards,
Hari KrishnaYou can use the below to populate the order reason at the respective levels.
1.FORM userexit_save_document_prepare in MV45AFZZ for VA01/VA02
2.FORM USEREXIT_PRICING_PREPARE_TKOMK in RV60AFZZ for VF01/VF02 and VF04
If you are in ECC then first preferrence should be for Enhancement Framework rather than using Classical User exits.You can check Enhancement Spots ES_SAPMV45A and ES_SAPLV60A for the above requirements or you can even implement using Implicit Enhancement within the subroutines of MV45AFZZ and RV60AFZZ.
TVAUT is the table for Order reasons with descriptions.
Thanks,
K.Kiran. -
Howto Send IDOC to third-party system. programID can not be registered.
Hi, guys.
I want to post IDOC to a third-party system through XI. And for sure, the third-party system can receive IDOC.
In the receiver communication channel, I would fill in the RFC Destination with a RFC connection defined in SM59.
In SM59, it is a tcp/ip connection and in technical settings the activation type is Registered Server Program. I name the Program ID randomly with 'a.a'. In Gateway Options, I fill the host with XI server and service with sapgw01.
Then I test the connection, the result is program a.a not registered on XI server.
My question is how to register the progam when I want to use this RFC to send IDOC to the third-party system. And how the RFC know which system he would connect. I don't find anyplace with the connection information such as IP or something like this.Sergio Cipolla
Thank you for your material. I have read the doc you refered.
Almost I understand the process, there is one part.
I should register the program ID in saprfc.ini file with the following content:
DEST=FROMXI
TYPE=R
GWHOST=saphost
GWSERV=sapgateway
PROGID=a.a
Here I am wondering the fiield "DEST" represent for. Does it mean the hostname of the target external system?
And Here is the UNIX system, what is the path location of the file saprfc.ini or where I should put this file to be effective.
Thanks in advance.
Bu Ju -
Create Oracle USER Account from Third Party System
Hi there
We have requirment to create Oracle USER Account through third party system.
How can we achive this?
I know ORacle Provide FND_USER_PKG.CREATEUSER API to create user
Is there any special thing we have to do to create Oracle USER from another system?
Thanks
ASIMHi,
Is there any special thing we have to do to create Oracle USER from another system?I believe you need to check the third party manual or contact the vendor for other considerations when creating user accounts from this system.
For FND_USER_PKG, please see the links referenced in this thread.
change password of EBS user
Re: change password of EBS user
Regards,
Hussein -
Sending Data from BI to Third Party System through CIB Interface
Hi Experts ,
We have a requirement where we need to send data from BI to any Third Party System through CIB Interface . We do not have to use the OHD's . Please share the documents for the same .
Regards
GarimaHi,
My problem is solved.
Sol: Getting wrong data from third party sytem. They are adding spaces in front of the payload and end of the payload so it was not processing. After deleting that spaces its is working fine.
Thanks for your help.
Thanks & Regards,
Purshothamm -
Need to extract PO's to send third party system
Hi,
I need to extract Purchase orders with the following criteria. I need to extract them based on vendor, Purchase Org and date of creation of PO
1. PO with no GR and IR
2. PO with no IR
3. PO with no GR
I need to extract the PO's as mentioned above as we need to send third party system. Please let me know is there any standard reports available to extract.Hi,
Explore t-code ME2L.
You can filter using the field Selection Parameters to identify those three segments:
Selection Parameters:
GUTSCHRIFT Invoices exist
M-OFFEN Open target quantity
R-ERLEDIGT No open invoices
RECHNUNG Open invoices
W-OFFEN Open target value
WA351 Open issue quantity
WA352 Issue quantity reversible
WE101 Open goods receipt
WE102 Goods receipt exists
WE103 Open goods receipt
WE104 GR blocked stock exists
WE105 GR blocked stock exists
WE106 Goods receipt exists
WE161 Open goods receipt: returns
WE162 GR exists: returns
You can also use the column available in the layout to idenfity if the PO has an invoiced, if its pending, etc..
Kind Regards,
Mariano -
Third party system (JCO) ---RFC--- PI ---RFC--- ECC
Hello all,
We are trying to implement the following scenario:
Third party system (JCO) -RFC-> PI -RFC-> SAP ECC
The third party system connect to PI via Java Connector API with a know user id in PI. After that third party system tries to obtain the RFC that is already implemented and remote enabled in SAP ECC environment. But at this step there is something wrong in third party system software because we are not able to obtain the RFC interface and metadata from PI repository.
1. This step is working correctly. Connection is OK.
JCO.Client mConnectionPI = JCO.createClient("100", // SAP client
"user_id", // userid
"********", // password
"pt", // language
"10.x.x.x", // application server host name
"01"); // system number
mConnectionPI.connect();
2. This step is not working correctly:
JCO.Repository repository = new JCO.Repository("TestRep", mConnectionPI);
IFunctionTemplate ftemplate = repository.getFunctionTemplate("Z_RFC_XXX"); - not found exception
We would like to know if there is something missing in any environment that we have to configure or implement in order to fix this issue. Thanks a lot.Hi Primini,
couple of stupid-but-necessary questions:
1) have you imported the RFC model in PI Repository?
You don't need to have the RFC metadata in PI ABAP stack (there is no point in doing that), but rather in the PI Repository/ESR, within the SWCV you've created.
Check the "Activities" session of this link for more details:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
2) if you have done 1), have you configured the RFC Sender scenario properly?
I mean, have you ran the configuration wizard to create the agreements & determinations, setting the RFC interface as both the sender and the receiver interface? Of course, the systems would be different: as the sender system, you'll have a Business Service representing the legacy/JCo system; as the receiver, you'll have the ERP Business System.
This should make your scenario work.
If it doesn't, try one more thing: in the JCo code, just for the metadata repository connection, use a connection to the ERP system. But for the actual call, use the PI system.
Let us know the results.
Best regards,
Henrique. -
RFID for third party system(rosetta net)
hi friends
Iam new for this Scenario, customers send the Purchase order through the ASN to the Rosetta net software. We are using the Rosetta net software for receive the purchase order from the customer.
Our business process I want to convert purchase order to sale order from the Rosetta net .after sale order number generated.
I am cleared about using the RFC program only helping to convert the data to SAP data between the system .but I want to know how I SAP system is connect to third party system and what are configuration required for this scenario .pls send me your sugggestion
with regards
dinesh
Edited by: code acess on Oct 15, 2010 5:00 AMif third party system is capable of making Remote Function call, then writing a Function module & making it remote enable is not difficult task in ABAP.
You may have to prepare specifications first to decide if third party system is going to Read, insert, update, delete records from Zee table. -
Commitment Interface from SAP to third party system!
When we created Purchase Requisition or Purchase Order, the commitment will be created. The third party system needs to track the commitment. So SAP needs to send the commitment to the third party system by this interface.
But when the Goods have been delivered, the commitment will be zero out and the actual will be posted to SAP. SAP needs to send the offsetting records to the third party system. In this way, the third party systems knows that how much commitments have been reduced.
My problem is that I cannot find the right table to record the offsetting entry. In the table COSP, I can identify the commitment by the Business Transaction -- RMBA and RMBE. But it did not record the offsetting entry. It just becomes zero when the goods have been delivered. But I have nothing from that table to send to the third party system.
Does anyone meet this problem before? Can you share some experience on this?
ThanksHi ,
As pointed ...above you can for a file to file scenario you can create just the Business service in integration Directory and create two file communication channels for sender and reciever under it.
However if it was file to idoc or file to rfc ..
then you need create ts web as abap ..identifying your R/3 system
System Name: <you can give a 3 character id here of r/3 system ...i.e like IDS>
System Home : <can be found in status of R/3 system>
Installtion Number : In transaction Slicense in R/3
Host Name : Same as System home can be specified.
Message Server: <3600+instance Number can be found in the log pad to the r/3 system itself >
associate a bussiness system with this ...create a product and a software component version ...In swcv in respository ..develop your object under it ...
Import this business system in Configuration ..and create your communication chanel under it.
Regards ,
Deepak -
Hi
i have a scenario like transfer data from SAP Ztable to the third party system with platform /os/db as mainframe/DB2 .. which adapter i have to use ( file or any other ) and which protocol i have to use..
generally what kind of questions i have to ask network enginner for using the FTP protocol..
venkatHi ,
As pointed ...above you can for a file to file scenario you can create just the Business service in integration Directory and create two file communication channels for sender and reciever under it.
However if it was file to idoc or file to rfc ..
then you need create ts web as abap ..identifying your R/3 system
System Name: <you can give a 3 character id here of r/3 system ...i.e like IDS>
System Home : <can be found in status of R/3 system>
Installtion Number : In transaction Slicense in R/3
Host Name : Same as System home can be specified.
Message Server: <3600+instance Number can be found in the log pad to the r/3 system itself >
associate a bussiness system with this ...create a product and a software component version ...In swcv in respository ..develop your object under it ...
Import this business system in Configuration ..and create your communication chanel under it.
Regards ,
Deepak -
Handling Rowset based message in third party systems
Dear All,
Could you please help me to understand, how can we handle a row set based message at third party system?
PeopleSoft will be sending a row set based messages to third party system and in turn it will be expecting a row set based message as a response. How do we need to handle this?
Thanks,
Hari.ASo you are creating an inbound sync service operation routing.
This can be very well a rowset based message for the request as the response, since every message is an XML.
3e party system will be sending an XML which in the rowset format (which is still XML).
You can just take the message and read it in a rowset, process it and create a response message based on a rowset.
3e party system will be receiving an XML which in the rowset format (which is still XML).
The reason wy I mention XSLT is that the rowset based message has a lot of overhead noded which is not relevent for 3e party systems, but needed for PeopleSoft.
See example:
method OnRequest
/+ &MSG as Message +/
/+ Returns Message +/
Local Message &response;
&response = CreateMessage(Operation.SYNC_REMOTE,
%IntBroker_Response);
&response.GetRowset().GetRow(1).GetRecord(Record.QE_FLIGHTDATA).
GetField (Field.DESCRLONG).Value = &MSG.GenXMLString();
Return &response;
end-method; -
PO import from third party system
Hi All,
We have a third party system where PO's are created and imported into Oracle as an approved PO via Standard interface table. A PO was created in Aug 2012 and is stuck in interface tables with rejected status as the vendor site ID missing. So updated the interface table with vendor site ID. And ran import standard PO program. PO is imported but with the date in FEB 2013 instead of the date in Aug 2012. ( As the PO period for Feb 2013 is opened)Why it happened? And is there any way I can cancel/delete the PO from Oracle and resend it with the same old date I.e., Aug 2012 date and so that it can create with old PO Number.
Thanks in advance,
Regards,
PramodWhy not starting with docu?
The general process is explained well in help.sap.com
As a service, put this into your Google: vendor invoice edi site:help.sap.com
Maybe you are looking for
-
CIF of material classification data
Dear Experts, Since a recent technical upgrade to our systems, I have seen a change in behavior of the integration of material classification data from ECC to SCM. Before the upgrade, classification data transferred with the initial CIF of the mater
-
HTML Toolbar in Email Compose with Java WebDynPro
Hi Friends, We are working on a email functionality requirement and we are having a requirement to add a toolbar in the Email Compose Box. For ex. that toolbar contains Bold, Italic, Underline, and other HTML stuff. i.e. to decorate the text in compo
-
Configuring Active Directory with 11g and Windows Server 2003 R2
Hi people, I'm spending some happy hours to setting up the windows domain authentication in a 2003 sever realm. When I try to register the database in the realm (logged as total-administrator-user of domain), NETCA give me an unexpected "no message"
-
Like the rest of you......ever since the downloaded update, my email won't download my email from mail client. Has anyone solved this problem yet? I know some have said it's gone away on it's own, but so far not my case. I'm getting very frustrated,
-
After IO8 what about my music ?
After IO 8 my music cannot be played and seems that it has to be bought again in App Store?