Decryption policy not working with Goole chrome

Hi,
Good morning!!!!!!!
I have been facing the issue with the CX module decryption policy. I have applied decryption policy to facebook, working with IE and mozilla browsers but not working with Google chrome. When tried with google chrome, getting the certificate error.
Kindly find error screen shoots in the attachments.
Please help us.
Thanks in advance.
Ashok Kumar.

Hi Colin,
Thank you for your reply.
Because of the certificate chrome is not trusting. I have imported the certificate from CX module and added the same certificate in google chrome browser, then it is working fine.
Thanks and regards,
Ashok Kumar S.

Similar Messages

Access Connections "Override home page" does not work with Google Chrome

I have different homepages set up for home and work locations within Access Connections. These work fine with Windows Internet Explorer 9 and with Mozilla Firefox 16. However, with Google Chrome 23 (my preferred browser), Access Connections does not override the home page. Since that section in Access Connections is entitled "Customize Internet Explorer, Firefox Browser or Google Chrome", it ought to work...
I am using a T520 with Windows 7 Professional 64 bit.

If Chrome does't display your webpages, then contact Google about it.
And for solutions, why not click a link at the right.
This one seems to have the answer :
https://discussions.apple.com/message/15096460#15096460
And provide a link.

My Iweb website does not work with Google Chrome

I have a website that works fine with Internet Explorer, Safari and Firefox but shows as a blank page in Google Chrome, as this is my business website I need to get this issue fixed. The website is hosted through CableOne. Any suggestions?

If Chrome does't display your webpages, then contact Google about it.
And for solutions, why not click a link at the right.
This one seems to have the answer :
https://discussions.apple.com/message/15096460#15096460
And provide a link.

Crossdomain policy not working with AMF

<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" />
</cross-domain-policy>
Attached is the crossdomian file I placed in WebContent folder. Below is the action script code I am using to set the policy file and send an AMF call.
                  private function init():void
                        var hostPath:String=HTTPUtil.getProtocol()+"//"+HTTPUtil.getHostName()+":"+HTTPUtil.getPort();
                        var policyFile:String=hostPath+"/Reports/crossdomain.xml";
                        Security.loadPolicyFile(policyFile);
                        Alert.show(policyFile);
                        var cs:ChannelSet = new ChannelSet();
                        var customChannel:Channel = new AMFChannel("my-amf","http://localhost:9081/Reports/messagebroker/amf");
                        cs.addChannel(customChannel);
                        divisionStrategiesRO.channelSet = cs;
                        divisionStrategiesRO.viewDivisionStrategies();
When tried loading the page I get the below error.
                Channel.Security.Error error Error #2048: Security sandbox violation: http://ffrtp1s.dist.abc.com:9081/Reports/flex/swf/svp/DivsionDrop.swf cannot load data from http://localhost:9081/Reports/messagebroker/amf. url: 'http://localhost:9081/Reports/messagebroker/amf'
                Let me know if we can get some help to fix this issue.
I am trying to load the JSP using spring-BlazeDS and I get the above error. My url in the browser is http://ffrtp1s.dist.abc.com:9081/Reportshttp://ffrtp1s.dist.abc.com:9081/Reports/showreports.jsp/showreports.jsp
both ffrtp1s.dist.abc.com and localhost point to the same machine and I am launching the browser in the same machine. If I use localhost in place of ffrtp1s.dist.abc.com then it is working fine.We will be deploying the application in remote server in few days and the dns is mmapped to hide the port and hostname and we are sure we will face the same error above.
   Let me know if we can get some help to fix this issue.

Hi Colin,
Thank you for your reply.
Because of the certificate chrome is not trusting. I have imported the certificate from CX module and added the same certificate in google chrome browser, then it is working fine.
Thanks and regards,
Ashok Kumar S.

Flex 2-15 Touchpad not working with google chrome

My touchpad works fine with every other program (so far) but the mouse cursor disappears over a google chrome (web browser) window and there is no click response either when ov er a chrome window.

@All...
Have you seen this thread: https://forums.lenovo.com/t5/Lenovo-Edge-Yoga-LaVie-Z-Flex/Problem-with-modes-on-Yoga-2-13-Windows-10/m-p/2130336
Reads as some folks have found some success with a similar issue with a Yoga 2 13.
Regards.

Drag and Drop not working with IE11,Firefox or Chrome on Windows 7 x64 SP1

Hello,
I am trying to use drag and drop on my system but it is not working. other's within my department have no issues, but they are using IE10. I also have SharePoint Designer 2013 installed.
Any suggestions?
Thanks,
Derek

Derek,IE11 is having some compatibility issues with the share point.Apart from IE11,it should work on IE10,9 and Firefox and chrome as well.
Please check the links below that explains the issues with IE11 and the functionality of Drag and drop and limitations as-well.
1.Since SharePoint 2013 fully support IE 32-bit version above 7, there might be compatibility issue with other browsers. I’d recommend you use IE 8,9,10 32-bit for optimal Performance.
2. Open the same document library in Internet Explorer as this functions does not work with Firefox or Chrome by default
3. Make sure the IE (Internet Explorer) Version should be 32-bit and not a 64-bit
http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
http://expertsharepoint.blogspot.de/2013/12/how-to-upload-multiple-documents-in.html
http://expertsharepoint.blogspot.de/2013/12/sharepoint-server-2013-drag-and-drop.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Simple Pass Not Working with Chrome Version 42.0.2311.90 m

SimplePass stopped working today. I noticed a while ago that I no longer had to manually add the Website Logon extension anymore. A small window popped up with a warning about using developer extensions and SimplePass worked. Website Logon extension is enabled, but SimplePass isn't working.
Does anyone know I can fix this? Many thanks in advance.
As a last resort, I have gone back to a previous restore point. Now SimplePass is working. However, I would still like resolution as I expect to encounter this problem again with other updates, etc. Can someone tell me what Windows Update may have caused the problem so I can not apply that particular update?
Thanks again.

Hi @mellman ,
Welcome to the HP Support Community! I hope you enjoy your time with us.
I see that you are having a problem with SimplePass not working with Chrome. This has been a problem for a while now as Google Chrome made some changes about what extensions are available from their webstore and how they work. You can try the steps in this HP Forums post to see if that fixes the issue for you.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Simple pass not working with Chrome

I've seen this posted numerous times (some posts going back to 2012) and I have yet to see an answer that works. I just bought a windows 7 machine with simple pass. Simple pass simply does not work with chrome. The only time it works is when I log on to windows itself. Everything is new and up to date, and simple pass is configured correctly.
This is one of the reasons why I bought this machine, and it just doesn't work. Can someone, anyone, tell me how to make it work?

It does work with IE Explorer but I have to use Chrome for work

Adobe Muse site not working in Google Chrome

Hi Guys, my adobe muse website www.focaldesigns.ie is not working in Google Chrome, i was advised to publish it again which I tried twice with no joy. Any help on how i can get the site back working in Chrome and on an iPad would be greatly appreciated. Thanks a mil, Claire

Hi Gaurav, thank you for taking the time to check this out for me. I appreciate it.
I've figured out If you open it in Chrome on a larger that 15" screen the site will open yet for some reason when I open it in Chrome it recognizes it as tablet and http://focaldesigns.ie/tablet/index.html appears in the tab bar -
I've tried re publishing the site in Muse and updated Chrome updates yet it is still not opening on a 15inch mac in Google Chrome, it is opening in other internet browsers perfectly. Any ideas?
Look forward to hearing form you.
Thanks Again.
Claire

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Safari not working with Yosemite- incompatible with google search too

Ever since I upgraded my macbook pro, Safari has been slow. In the past 2 days, it's more than slow - it's impossible. I am able to get to pages I have bookmarked or get to links in email documents - but every time I try to do a search using the search bar in Safari, it hangs. Sometimes I get a list of possible websites (after a few minutes) but if I click on any of those, Safari just hangs there and won't go. I even had to use Chrome in order to generate this question in the discussion groups. Does anyone have any suggestions other than using an alternate browser. Is it possible that google and Safari on Yosemite are incompatible? I did try using the "Develop" menubar option and chose DuckDuckgo as the search tool and it worked a bit better.
This is now the 2nd big issue I've had with Yosemite -- it totally would not work with my Adobe Photoshop Elements program -- I spent hours on the Adobe forums and discovered that 100s of others were also having issues. It turned out to be a problem with Yosemite and the trackpad. Adobe finally came up with a temporary plugin that allows Elements (and other Adobe programs) to run.
Suggesions on Safari other than ditching it and using Chrome?

Try a Safari reset.
Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items. Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.

Uploading files to website not working with Safari in Windows 7

Safari version: 5.1.7
OS: Windows 7
Hi,
I am a website owner, and I have a feature on my site where users can upload large (up to 50MB) music files to my server. The feature works in Firefox on OSX & Windows platforms and it also works in Safari on OSX. The uploading feature is not working with Safari for Windows. Do you have any idea why and how to fix this? It can't be an issue with my server as it works in other browsers fine and works fine in Safari for OS X.
If you have any information on how to solve this or things for me to try to rectify this for use with Windows operating system it would be much appreciated.
Thanks.

GREAT NEWS!!!!
I have solved this issue myself with some help from my a user on Microsoft Forums. The issue stems from the mime type of each Browser Chrome, IE, & Safari for Windows defaults as audio/wav. When the mime type is changed to audio/x-wav everything works. Firefox defaults to audio/x-wav and when changed to audio/wav it DOES NOT work.
Once I input some code in my .php upload page to change the mimetype if audio/wav is detected everything works GREAT!!!
So Here is what you need to do: Find your upload page and input this code:
echo "<p>MIME Type: ".$_FILES["file"]["type"]."</p>";
right before your "If/then" statement of file type. For me it was near line 30 in my upload.php page, but I'm sure this is different for everyone.
This will detect and DISPLAY the default mime type of your browser on the error page when your upload doesn't work. Once you know what mime type works for your file type then you can change your "if/then" statement for mime type upload to change your mime type to the correct one.
I don't want to give the code here, because I'm sure it's specific to your file types and your site construction, but this should lead you on the right track.
***This is the solution if you ARE NOT ABLE to upload any certain file in a certain Browser. It has to do with mime type construction***
I hope this helps others like it helped me!!!!!

HT4759 Why does icloud Contacts not work with Windows XP?

Does anybody know why iCloud Web page does not work with Windows XP? I have tried IE, Firefox and Chrome

XP is not supported by iCloud, that's why.
iCloud System Requirements. PC.
Microsoft Windows 7 or 8
iCloud Control Panel 2.1 or later
iTunes 11 or later (for iTunes in the Cloud and iTunes Match)
Outlook 2007 or 2010 or iCloud.com
Safari 5.1.7 or later or Internet Explorer 9 or later (for iCloud.com and Bookmarks), Firefox 16 or later or Chrome 23 or later (for iCloud.com)

ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE. THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

Decryption policy not working with Goole chrome

Similar Messages

Maybe you are looking for