Dedicated analog POTS line for the user

Hi Experts
yesterday ....... i post the discussion about how i can reserve one analog telephone line for one of my user so whenever he make outgoing call his calls go through one particular analog line and never found busy tone .... in reply to my this query one guy tell me to use partitions and CSS ... my question is lets say if i create new partition name " test" and assign my user to this partition so he can only use it  whenever he makes PSTN dialing so his call goes through this partition and reached my GW but my GW have five different analog line's how GW came to know that the first line is reserved for all of the calls coming from this user which is assigned to this partition.
i have CUCM 8.5 and GW is Cisco 2800 series ......... i dont want my user to dial any extra digit or PIN
Regards
Salman

Hi,
I assume that this is MGCP gateway
Please, try to do the following to achieve your requirment:
Create a partition named "TEST" and associate this partition with your all access CSS say XYZCSS
Create a Route Group (TEST-RG) and add one of the five analog line which you want to isolate for this user. (analog line i.e. AALN/Sx/SUx/y@abc)
Create a Route List (TEST-RL) and select the TEST-RG group.
Create a Route Pattern (Pattern .!) select Route Partition "TEST", choose the Gateway/Route List "TEST-RL" ans save
In gateway configuration for End-Point please select the Calling Search Space "XYZCSS" and the attendant DN will the user's DN
Assign the users DN in TEST Route Partition and configure the CSS as XYZCSS (this CSS will have all the other partition to rreach internal user and including the TEST partition)
Try by configuring as per the above suggestion, if you have any issue please quota me. This user will able to dial the digit directly without adding any prefix or extra digit.
I hope this will help you or will drive you to right direction.
Thanks
Selvarathnam

Similar Messages

  • FAX Analog line for the Router

    Hi NetPro.
    May i know that if i have 22 numbers of FAX Analog lines which i module should i add on into the router ? and how many ports which can fullfill the 22 lines of FAX Analog lines.
    example : EVM-HD-8FXS/DID ... etc
    Thanks
    Regards,
    Kitten

    Are you connecting 22 analog faxes (FXS), or are you connected to 22 analog POTS lines (FXO)?
    EVM can only do 16 max FXS or 8 max FXS + 6 max FXO.
    which router do you have?
    If FXS, consider getting 24 port VG224 http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps2250/ps5516/product_data_sheet09186a00801d87f6.html

  • Authority Check at the T.Code level for the user in particular User Group

    Hi Friends,
    I have created a ZREPORT and assigned this report to a ZTRANSACTION CODE.
    Need to give Authority Check at the T.Code level for the user in particular User Group.
    I have searched in SCN, but not get suitable pages.
    How to solve this?
    Regards,
    Viji.

    Hi Viji.
    Saha way is actual way for authority tcode but user authority in TCODE:- SE38 he/she can run report(ZREPORT) wise program is run is no authority check.
    Another way is you have also check authority in program level.
    DATA: T_ROLE_USERS TYPE STR_AGRS OCCURS 0 WITH HEADER LINE.
       INITIALIZATION.
      CALL FUNCTION 'ESS_USERS_OF_ROLE_GET'
        EXPORTING
          ROLE       = 'ZROLE''  " Role define
        TABLES
          ROLE_USERS = T_ROLE_USERS.
      READ TABLE T_ROLE_USERS WITH KEY UNAME = SY-UNAME.
       IF SY-SUBRC NE 0.
       RETURN.
       ENDIF.
    Thanks & Regards
    Rahul

  • I am in the process of expanding a database of chemistry journal articles.  These materials are ideally acquired in two formats when both are available-- PDF and HTML.  To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

    I am in the process of expanding a database of chemistry journal articles.  These materials are ideally acquired in two formats when both are available-- PDF and HTML.  To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read.  Both formats are, of course, readily recognized and indexed by Spotlight.  Journal articles have two essential components with regards to a database:  the topical content of the article itself, and the cited references to other scientific literature.  While a PDF merely lists these references, the HTML version has, in addition, links to the cited items.  Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight.  Embedded URL's are, of course, ignored by Spotlight.  As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them.  Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
      In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight.  This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items"  (along with "Get URLs From Web Pages") give unsatisfactory results.  When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step.  A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed.  Is there a way for Automator to do this?

    Hi,
    With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
    That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
    "I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson  EMP-TW2000 projector. This projector is HD compatible.
    To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
    I prefer option 2, so my question is: which would be the preferred export preset?
    Project specs:
                        - 1920x1080 sq pix  (16:9)
                        - 25 fps
                        - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
    To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video  (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
    So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
    I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
    Please give it a look.
    Thanks,
    Jef

  • Background job got cancelled for the user ----- Isolation and resolution

    Hi Experts,
    One background job got cancelled for the user I have the Jobname and User...
    Able to view the log information in SM37.
    I am not sure what is the next step to do and how to resolve this issue.
    Could any one please provide me the step by step Isolating the issue and resolving it.
    That would be really greatfull.
    Thank you in advance.
    Regards,
    Prem.

    Hi,
    What the error it was stating in that SM37 job log?
    Pls post that error log, not completely just mention the error here we'll try to help you.
    rgds,

  • How can I change the password for the USER in SAP.

    How can I change the password for the USER in SAP?
    also I want to change the Language and  date Format b/c it's displaying in German language..

    Hi,
    Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
    select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
    Now, system will ask for new password to change.
    If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
    Enter User's id and Click Change icon.
    It will lead to Page: Maintain User.
    Here, Select tab: Logon Data
    There is a Sub-Tab: Password.
    Here, key-in change password and SAVE.
    For Language and Date format, contact your Basis-Personnel.
    Best regards,
    Amit

  • Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

    Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

    List and table controls -> listbox..is that what you are thinking of?
    The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
    If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
    MTO
    Attachments:
    Listbox_example.vi ‏34 KB

  • Creating portal desktop for the user

    Hi All-
    Please help me out...
    1) Could you let me know the detailed procedure ( if possible please provide screen shots) to create "Portal Desktop for the user".
    2)Suppose we developed a webDynpro Application and we need to make it Role Based access....please let me how to achieve this..
    3)Help me out in creation of "Roles" in Portal Content Development and the steps to assign pages to "Roles"
    Regards,
    Cris

    Hi Cris,
    Follow these links for the required info.
    Creating Portal Desktop for specific user
    Portal Branding for specific user
    Creating Roles & worksets
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/bceaffeb8c114ebef8255b63079c7c/frameset.htm
    Integrating webdynpro in portal
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/2fffe990-0201-0010-aab0-e61c3250bcf3
    Hope I am helpful.
    Cheers,
    Santhosh

  • Windows 7 very slow logon, Waiting for the User Profile Service, winlogon event 6006

    Hello,
    Every so often one of our Windows 7 clients which is not normally having any delay at logon will take a very long time to login. This may be 10 or 20 minutes or up to an hour in some cases.
    Typically the event log will contain entries like
    The winlogon notification subscriber <Profiles> took 572 second(s) to handle the notification event (Logon).
    There is no further information available from Event Log Online Help, nor any additional detail as to why the logon event was so slow. During the delay the user will just see "Waiting for the User Profile Service" on their screen.
    We first started seeing this problem with Windows Vista and if anything the situation has not improved since then. It has never happened with any of our Windows XP users.
    We are currently planning a migration of computers to Windows 7 but stuff like this which has not been resolved in Windows over a 2 year period will stall that migration. The least improvement is to increase the event notification to give a lot more
    information on why the user profile processing has stalled.

    Hi,
    When did the issue begin to occur? Did it occur after installing certain application or applying certain policy?
    To troubleshoot the issue, please perform the following step.
    1. Restart the machine in Safe Mode with Networking to check whether the system can login quicker.
    2. Type “gpedit.msc” in Search box and press Enter. Navigate to the following location:
    Computer Configuration->Administrative Templates->System->Logon
    Please double click “Always wait for the network at computer startup and logon” policy and disable it.
    3. Perform a
    Clean Boot to check the result.
    Thanks,
    Novak

  • When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

    when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

    Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
    ''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

  • [SOLVED][GNOME] What is the line for the startup sound?

    Hi!
    I removed the startup sound from GNOME.
    I don't even remember if it did work, but I press the remove button a bit too quickly and there is no confirmation box.
    Could you launch gnome-session-properties and tell me the command line for the GNOME startup sound please?
    Thanks!
    Last edited by Creak (2014-01-17 18:40:13)

    Spider.007 wrote:You're welcome! You should also mark this thread [SOLVED]
    Done!

  • "Please Wait For The User Profile Service" message when logging on to TS 2008

    I have a Windows 2008 AD Domain with 2 Windows 2008 Terminal Servers.  Both are configured identically.  I have the TS Roaming profiles stored on a 3rd server and a GPO pointing all users to the roaming profiles.  On one of the servers everything works perfectly.  On the second server the users, after they input their credentials, get the following message "Please Wait For The User Profile Service".  The message can stay there for up to 3 minutes, then they are logged innormall with the correct profile.  This problem does not occur on log off.  Any help would be appreciated 

     99% of the times I had this problem it was caused by either DNS issues or network bindings.
    Are your servers multihomed? In other words: do you have multiple network cards? If so, make sure your "production" card is on top in the network connections -> advanced settings -> adapters and bindings.
    You could also enable user env logging (search microsoft how to do that)

  • Trying to install Leopard on my iMac (G5).  Got to the screen that asks for the user name and password and it won't take it.  How do I get out of this and resume the software install?

    Trying to install Leopard on my iMac (G5).  Got to the screen that asks for the user name and password and it won't take it.  How do I get out of this and resume the software install?

    Help here >  Mac OS X: Changing or resetting an account password

  • Table name in Oracle for the User Mapping field?

    Does anyone know the table name for the user Mapping field in EP6.0?
    Thanks

    Hi Alan,
    why do you want to access the DB directly?! You can access the information via the Java API, which is in general the most secure way for the DB scheme is always "subject to change without notice"...
    Best regards
    Detlev

  • After a quiz can you show the questions and answers for the user to review from passing the quiz

    After taking a quiz, is there a way to show the questions and answers for the user to review from passing the quiz.
    And the ones who has failed the quiz would be directed to the first slide again to take the quiz over.
    Thanks

    Rod
    I see that information about adding the review quiz button but on that last slide where it shows results, I want it jump back to slide 1 but it jumps to the first question of the slide. Is there a way around that?

Maybe you are looking for