Dedicated Memory Does Now Show

My Laptop model is HP ProBook 450 G2 Notebook PC, Serial Number:   [Personal Information Removed], Product Number:   L6B82PT. This PC supports AMD 2GB Dedicated Graphics Card (ATI AMD Radeon R5 M255). I have istalled both driver such as below:
1. AMD Hybrid Graphics (HG) Video Driver and Control Panel
2. Intel Video Driver and Control Panel
but I can see my Dedicated Memory is 0 in Graphics Advance Settings Panel like below image
Please help me with proper instructions to resolve this issue.

Hi, That's right, it only uses shared memory in this case and the value is over 1900MB. Other vendors do the same by letting system allocates available memory for it. Regards.

Similar Messages

  • HT4623 I started my ios7 update and had to interrupt it and now it does not show up but phone was not updated.  What can I do?

    what can you do when you interrupt your update and when you try and finish it, the update does now show up on your settings>

    try resetting your phone by turning it off and back on again and tr again. if that doesnt work, try updateing via itunes

  • When searching files within folders does not show all? Plz help

    This problem occured recently, few days back.
    When searching a name or extention it does now show all the files with the same name or extention?

    Figured it out I used straight serial cable. put null modem adapter solved the problem.

  • I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

    I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
    It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
    If anyone has any suggestions I would be happy to hear them.
    I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
    I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
    Anyone?

    Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
    The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
    I have my suspiscions about the drive but any help would be appreciated.

  • DBCA does not show memory above 2GB

    Hi,
    I created a DB using DBCA and was trying to assign 4GB for memory_target on a 11.0.1.6 database Win x86 ; but DBCA shows max memory of 2048 MB.
    PAE is enabled on the server and I can see it shows 6GB RAM. But why does DBCA show only 2GB ? Can I only edit the spfile to increase memory_target to 4GB now ?
    Thanks.

    You'll never get to use more than 2GB of memory on a 32-Bit OS for the following reason:
    bq. {color:#0000ff}Oracle on Windows runs as a single process. All memory for the Oracle RDBMS on Windows comes out of that single process address space. This memory includes: \\ - Process overhead (code for oracle.exe) \\               - The SGA for the instance \\               - All user threads \\               - All user PGA memory \\ The process address space on 32-Bit Windows is 4GB. However, Microsoft reserves 2GB for OS kernel memory, leaving a default of 2GB for a user process (eg ‘oracle.exe'). \\     {color}
    This excerpt is from the following document and you can refer to it for further understanding:
    Oracle Database 10g - Best Practices for Windows Deployments
    [http://www.oracle.com/technology/tech/dotnet/col/ow%202005%20oracle%20db%20on%20windows%20best%20practices.ppt]
    Hope this clarifies.
    Regards,
    Naveed.

  • I use an iPod nano 5th generation. I have had it for 2 years now and then after about a year when I plugged in my iPod to my computer, the iPod is read but the tab where I would always go that showed my list of artists to sync to my iPod does not show up

         I use an iPod nano 5th generation. I have had it for about two years now and after about one year, I plugged in my iPod into my computer to sync more music. Here is the problem: The tab where you go to sync music to your iPod and shows the list of artists and songs you want to sync to the iPod, the tab I can get to but the list of songs and artists does not show up and the only way I can sync music to my iPod is to basically wipe my iPod and start from scratch. Obviously, I do not want to do that because I do not have all the songs in my library that I have on my iPod. I have uninstalled iTunes and then re-installed it, but it did not work and I do not know what else to do. I would really appreciate helpful guidance to get it fixed if it can be fixed. Thanks in advance

    http://support.apple.com/kb/TS1591
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address.  How can I re-gain access to those hundreds of purchased songs?

    You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
    Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

  • I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes.  There is no 'Devices" category on the bar at the left

    I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes.  There is no 'Devices" category on the bar at the left

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.

    ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.  help?

    Hi stitchinstar!
    I have an article for you that will help  you troubleshoot this issue with your iPod and iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • HT4972 My IPad 2, IPhone 3GS ans iPod  no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-startedev

    My IPad 2, IPhone 3GS ans iPod  no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.

    Ok thank you so much, for your timely response.
    RESPONSES:
    1)   When I set up my iMac, I did not transfer any data directly from my windows PC.  I simply used the same iTunes login and account.  I have access to all of the files via the "Purchased" section of the iTunes store.  If I click "Download Previous Purchases"  text, I can download ALL of the purchases I have ever made.
    2)   I have the Apple TV 2, so good news, question answered.  I thought maybe it was the Apple TV 1, but it is the Black model, so bam.  Good response for you.  Well the whole damned reply is an awesome response, just pointing out that one piece of awesome.  I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
    QUESTIONS:
    3)   So can my iMac not stream the data directly from itunes, without download?  Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
    SERIOUSLY.... THANK YOU... 
    I work in the computer support section for the Military.  The only problem is we use Windows , lol.  Well that and i've been gone for nearly 6 months on recover.  I go back next month though I hope.  But working in that field gives me the abilty to judge responses that run inside the same vein.  Your response was so awesome that I half thought I might have written it myself. 

  • I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
    To get all your content off your connect your iPad to your new computer.
    Then use a 3rd party piece of software to transfer your content
    I have found Senuti useful but there are others listed in the article I linked to in a previous post.
    https://discussions.apple.com/docs/DOC-3991
    That will let you transfer your non purchased content
    For Purchased content log in to iTunes on the new computer
    In Itunes Store click on Purchased under the Quick Links section on the right.
    Download any music by clicking on the cloud button

  • My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

    I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

    http://support.apple.com/kb/TS1591
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Does the standard Intel HD Graphics 4000 in the 13 inch Macbook pro stand up to other graphics cards with dedicated memory ( 1GB of memory for instance)?

    Does the standard Intel HD Graphics 4000 in the 13 inch Macbook pro stand up to other graphics cards with dedicated memory ( 1GB of memory for instance)? I need a laptop for college and the Engineering program suggests a dedicated video card with minimum 1GB of video memory.

    I have a Intel HD 4000 in my Mac Mini (late 2012), and it's okay for what I need it.
    However:
    - there were a few issues with flickering on the video output to external monitors. These were solved through a firmware update that came with OSX 10.8.3 - for the majority of the users. There is apparently still a small group of users that still has issues. You can read long threads about this here:
    https://discussions.apple.com/thread/4472316?start=0&tstart=0
    and here
    https://discussions.apple.com/thread/4490924?start=0&tstart=0
    So for most of us (me included) this issue is solved, but it seems that certain displays / monitors don't work well with the intel HD4000, don't know if there is a pattern or a list of monitor models...
    - there was an issue with the color calibration on the HDMI output. No matter how much you tried to calibrate, the results remained unsatisfying. All light colors were crushed to white, wrong contrast, ...
    You can read about this here:
    http://forums.macrumors.com/showthread.php?t=1482487
    https://discussions.apple.com/thread/4480354?start=0&tstart=0
    The same firmware update improved this a little, good enough for me, but I can imagine it's not good enough if you do graphic work and need reliable colors from your monitor. On HDMI output, the thunderbolt/MDP output is fine. So it's mainly a dual monitor setup issue.
    If it's for graphic work, I'd go for a Mac Book Pro with dedicated GPU !

  • I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    Please then use your web Browser  address http://www.adobe.com/  and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
    Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
    Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in  using the account that has the subscription the one you used above to Activate Photoshop.

Maybe you are looking for

  • Unable to see IMAP folders after crashing Memory module.

    Hi All, We are running Sun JES Messaging Server V6.2 on Sun Sparc Solaris9 platform. Software Name/Version: Sun Java(tm) System Messaging Server 6.2-4.01 (built Sep 1 2005) libimta.so 6.2-4.01 (built 04:31:31, Sep 1 2005) SunOS jes-be 5.9 Generic_117

  • Difference Betweeen BW 3.0 and 3.1

    Hi friends I have the following quries 1. Did you find any difference when activating the buisness content BW 3.1 when compared to BW 3.0 2. In order to send an email to particular usesrs in Process chain can we use messages.If we use messages is the

  • Hash table and function module input

    Hi ABAP Expert, Please advise what happening if i am passing the intertal table (hashtable) become input of function module (table). so insite the function module is this table still hashtable type or just normal internal table ? Thank you and Regard

  • Transfer Digital Performer files into Logic Express?

    I have some old recordings that are on a ADAT tape. A friend of mine said he could transfer them to Digital Performer. Does Logic open DP files? Paul

  • Export DB on my destop

    I want to build my testing DB Lab on my desktop, I am primary owner of 4 DBs at work, I am planning to configure the same environment on my desktop for testing. I need hard disk like 500GB, my question is which hard drive i should put in my desktop,