Dedicated web cache server configration -- Help pls!!!

We have a server (A) dedicated for web cache purpose, and outside the firewall. The web cache is pointing to machine B's mid-tier port.
Inside the firewall, we have this mid-tier (portal) and infrastructure installed on one machine (B).
The config. works when we use the intranet to access. However, when attempting from a computer outside the firewall, the authentication fails. Any comments on the problem?

Similar Messages

The Security Token Service is not available error on dedicated Distributed Cache server

I have an error on a dedicated Distributed Cache server stating that the Security Token Service is not available. I was under the impression that when Distributed Cache was running on a dedicated server that the only service that should be enabled
is Distributed Cache.
The token service is working as expected on all other servers but this one. Does this service need to be started or should I just ignore this error message?
Jennifer Knight (MCITP, MCPD)

as per my little experience with 2013, if STS is working fine on Web server then I am sure that sharepoint will be fine...Distributed cache stores the ST issued by STS. NO need to worry about this error.
Login
Token Cache
DistributedLogonTokenCache
This
cache stores the security token issued by a Secure Token Service for use by any web server in the server farm. Any web server that receives a request for resources can access the security token from the cache, authenticate the user, and provide access to the
resources requested.
I would say check the ULS logs and get more details about the error why its not working on that server.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Wlserver.exe error occur while start the web logic server-please help

hi
Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
Thannks in Advance,
Cheers,
bala...

Could you please mail the errors and the WLS Version and service pack as well.
- Ramkumar

No response from web cache server

Hello,
I have OCS installed on linux box. when i am trying to connect to web conferencing home page through winodws, after connectivity check when i click on login, it is showing me error as "NO response from webcache serve".
For webconferencing on linux i have run following scripts ./dcmctl, ./imtctl and ./webcachectl it is showing me as webcached server is running.
what more i have to do for getting the access to webserver?
can anyone help me please?
Regards,
Sarita

In the OAS Release 2 Web Cache Admin guide, you''ll find that the solution related to that particular error is to increase the network timeout between the web cache and the origin server. Change it in Resource Limits and Timeouts page of the ASControl.
However, with all the internal errors that you are also getting, the problem is likely something else so increasing the timeout value might only mean it'll take longer before it tells you there's an error.

Need help resolving Web Cache upgrading error

I successfully installed 10g AS on top of my 9i AS (9.0.3) on a different Oracle home. Then I proceeded to run the Upgrade Assistant (iasua.bat). Everything went well except the upgrade of Web Cache failed. I'm only installing/upgradeing the J2EE and Web Cache. Any help would be greatly appreciated.
I'm running on XP SP2.
the following are the lines in iasua.log related to the error:
2007/04/04 21:10:22.890 GMT NOTIFICATION:1 Framework: Starting to upgrade WebCache.
2007/04/04 21:10:23.515 GMT ERROR:1 WebCache: Invalid element 'MULTIVERSIONHEADERSRULE' in content of 'CACHEABILITYRULE', expected elements '[SELECTORS]'.
2007/04/04 21:10:23.515 GMT ERROR:1 WebCache: Unable to upgrade file C:\Oracle\ora9ias\webcache\webcache.xml
2007/04/04 21:10:23.515 GMT NOTIFICATION:1 Framework: Finished upgrading WebCache with status: Failure.

What that means is Silverlight can't find a required component.
When I clicked on the site, it loaded pretty slow but I got to see the login screen without error.
Either the expected dll is cached on my machine or you have an intermittent problem.
As I'm a some-time Silverlight developer I could well have necessary dll if they are standard components.
As an outside chance...
You could try clearing your cache in case it's a versioning issue.
Failing that, I suppose you could maybe install the Silverlight and blend sdk.
One thing you could easy try.
Does Silverlight work for you generally?
Follow the link on this page:
http://social.technet.microsoft.com/wiki/contents/articles/30387.silverlight-trouble-shooting-installs.aspx
If that errors then it's the install on your machine.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Recommended Hardware, OS for Web Cache

We are planning to implement web cache for our 9i AS (Sun Solaris) environment. The Web cache server will be running on its own box. Also, we would like to perform load balance on our web cache tier down the road.
Keeping all this in mind. Could someone provide us the recommended hardware (/w cofiguration) and OS for implementing web cache. Thanks,

Web Cache is designed to run on low-cost commodity hardware. You need at most 2 CPUs (the faster the better) to run
a Web Cache instance. A single CPU machine is OK, too -- again, the faster the better.
For the money, you can't beat a 2x933 Linux box.
Then there's memory. Most 32-bit OSs provide 2GB of addressable memory. You want to make sure there's enough
memory to cache all the content you want to cache. Usually, 2GB is more than enough. 500MB - 1GB is usually sufficient.
Depends on your app.
In a few days, I will post a paper on http://otn.oracle.com/products/ias/web_cache/
that covers the best practices for sizing and performance of Web Cache 2.0.0.x (9iAS 1.0.2.2). This will help you with
sizing.
The network may also be a consideration for performance, as the paper mentioned above discusses.
Readers shoud note that the information in this standalone paper has been moved to the Performance and Tuning Guide
for 9iAS release 2 (version 9.0.2) which is due out shortly. Some of the information will be different in Web Cache 9.0.2 than
it was in Web Cache 2.0.0.x.

How To Increase WEB CACHING HITS

Hello All,
I have configure WEB CACHING on my TMG Server 2010 , Full fill all requirements as WEB CACHING Needs but still cache results are not well GOOD.
I Tired Different type of rules but still cache utilization is around 3 to 4 % and internet traffic goes 97 %
Is there any technique to more utilization of WEB Caching.

Hi,
You could have a look at the rule in the following blog.
Configuring Forefront TMG 2010 as a Web Caching Server
http://www.msserverpro.com/configuring-forefront-tmg-2010-as-a-web-caching-server/
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to redeploy Calculation Manager Web Application Server

Hi All,
I am installing a patch(13925741) for Calculation Manager, i stuck at the following point:
6. Perform the standard Calculation Manager Web application server deployment task using Hyperion Enterprise Performance Management System Configurator (EPM System Configurator). See the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions.
I don't know how to redeploy Calculation Manager Web Application Server, plz help me in deploying this.
The readme for the patch can be found at:
https://updates.oracle.com/Orion/Services/download?type=readme&aru=15356919#_Toc330987031

909062 wrote:
Hi All,
I am installing a patch(13925741) for Calculation Manager, i stuck at the following point:
6. Perform the standard Calculation Manager Web application server deployment task using Hyperion Enterprise Performance Management System Configurator (EPM System Configurator). See the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions.
I don't know how to redeploy Calculation Manager Web Application Server, plz help me in deploying this.
The readme for the patch can be found at:
https://updates.oracle.com/Orion/Services/download?type=readme&aru=15356919#_Toc330987031
Hi,
Did you actually try to look at the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions as suggested ?
To redeploy a component, run the configurator that can be found in the start menu under Foundation Services. Then select "modify an existing instance". Then for Calculation manager, check the box "Deploy to application server".
Thanks,
JM

IOS SLB transparent web-caches

Hi all,
I wanted to ask if anybody has implemented SLB with transparent web-caches, and if yes how was it done?
can anyone give me a short overview how to implement this? Because I couldn't find enough information on the Cisco site. We are able to implement SLB for various services, but unable to do the same thing with transparent web-caches.
Any help would be greatly appreciated
thanks

HI,
you can do this for example with a CSS (compare to http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a0080093ff3.shtml). This is an example of how to implement transparent caching with a CSS. Same works if you are using a CSM. Required is using a Content Engine.
Regards,
Joerg

Web cache starting problem (Oracle 9iAS)

Hi, newly I installed Oracle9iAS for portal development.
The problem I am having now is:
When I tried to start the web cache service in ias lever,
it always gives me the following error:
oracle.sysman.emSDK.util.jdk.EMException: Throwable: The attempt to start or stop Web Cache failed
Please help em on this issue. Any advice will be greatly appreciated.

I suggest that you post this question in the OracleAS Portal Caching forum:
http://forums.oracle.com/forums/forum.jsp?forum=9

Standalone webcache or Web cache from Oracle Apps Server 10.1.2.0.2?

Hi
I am installing web cache on two servers in web tier and J2EE server (with OHS) on another two servers in apps tier. Should I use standalone webcache or install from Oracle Apps Server package? If I choose Oracle Apps Server package, I have to disable Home, HTTP components. But it is DCM managed. Any suggestions?
And should I deploy my OHS servers on web cache servers in the web tier? In future we want to expand J2EE installation, we will deploy Portal with SSO, OID etc.
Regards
Shen Jie

Shen Jie,
Please review the Enterprise Deployment to see what are the best architectures.
Hope this helps.
Deepak

Cannot start Web Cache in Oracle 10g App Server

Hi,
Our Application runs on Oracle10g App Server,
When it tried to start WebCache using the command
opmnctl startproc ias-component=WebCache process-type=WebCache
it shows the error...
opmn id=oracle10g:6200
no enabled components for this request
When i tried to enable WebCache using Enable/Disable Component in Oracle 10g Enterprise manager - I can't see WebCache component it to enabe or disable it.
When i tried opmnctl status., it shows
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
HTTP_Server | HTTP_Server | 7276 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 7684 | Alive
OC4J | rhs | N/A | Down
OC4J | instaremit | 5880 | Alive
OC4J | insta_test_apr_02 | 7100 | Alive
WebCache is not running, also as the WebCache is not listed in Oracle 10g Enterprise manager, i can' enable or disable it.
Plz Help me over this.,
Regards.,
Deepak.C

Hi.,
Thanks again !!!
Yes, My Oracle HTTP Server is listening on port 80.
I am not clear, may i know why should the ports be changed for the request to go through Web Cache ???
Can i assign port 80 for Web Cache and 7778 for HTTP Server ?
Also In Oracle Enterprise Manager, Web Cache is not available...
home, HTTP Server, management alll these are there...
Also for HTTP Server, it's not showing any metric info, 'Not Yet Available' is shown even though the HTTP Server is running, how can i get metric info about Oracle HTTP Server, i have also used dmstool -t ohs_server, its not working
It's showing... FLEXMON ERROR : detected invalid table name ohs_server
dmstool -l -t also does'nt lists ohs_server
Hellp me over this.....
Deepak.C

Mac OS X Server Forward Proxy(Web Caching)...setup a website for the proxy???

My office is a Mac environment with a couple of windows pcs. To save on bandwidth i would like to setup a Mac OS X Snow leopard server with a web caching proxy, forward proxy. I read this link from apple
Server Admin 10.6 Help: Configuring Web Service Proxy Settings
i understand that to set this up i must enable it on my Mac Server and also on the clients(end user) web browser. What i don't understand is this part:
"When setting up a forward proxy, make sure you create and enable a website for the proxy. You might want to disable logging on the proxy site or configure the site to record its access log in a separate file from your other sites’ access logs. The site does not need to be on port 80 but setting up web clients is easier if its browsers use port 80 by default."
Create and enable a website for the proxy??? I don't understand, why do i need a website for web caching? Shouldn't the settings in the web browser direct the http requests to the mac server and it does the rest, what has a website got to do with it and what type of website?How?
Please help, thank you in advance

SL Server

IPlanet Web Proxy Server 3.6 and emptying out the cache.

Hello.
I'm wanting to empty out our proxy server's cache in an attempt to resolve one of our users help desk problems - a web site they are accessing is not loading correctly when going through the proxy server, bypassing the proxy server works.
The problem is that the technician who implemented our iPlanet Web Proxy Server 3.6 has left the company and no one else is aware of how to do this. Can anyone advise of what has to be done to achieve it? Thank you.
Kind regards,
Jimmey.

Hi
This as per the HTTP/1.1 RFC (RFC2616)
The Connection general-header field allows the sender to specify options that are desired for that particular connection and MUST NOT be communicated by proxies over further connections.
The Connection header has the following grammar:
Connection = "Connection" ":" 1#(connection-token)
connection-token = token
HTTP/1.1 proxies MUST parse the Connection header field before a message is forwarded and, for each connection-token in this field, remove any header field(s) from the message with the same name as the connection-token. Connection options are signaled by the presence of a connection-token in the Connection header field, not by any corresponding additional header field(s), since the additional header field may not be sent if there are no parameters associated with that connection option.
Read the following at
http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html#sec8.1.3
and
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.10
Regards
Nagendra HK

Help on Setting up Web Cache.

Hi,
I need help for setting up OAS Web Cache, whether the following setup is correct. I’m new to this.
When I login to http://server2.domain.com:8300/appname1/, the display URL is changed to http://server2.domain.com:7778/appname1/. However there is no activity in the Web Cache Statistics.
We have OAS Web Cache standalone installed on one server using port 80 (e.g. server1.domain.com) and OAS Application Server (HTTP & J2EE) installed on another server using port 7777 (e.g. server2.domain.com).
Currently, when our user login to the application, they use the following URLs:
http://server2.domain.com:8300/appname1/
http://server2.domain.com:19000/appname2/
I have setup OAS Web Cache as follows:
Listen Ports:
     Cache Name: server1.domain.com-WebCache
     IP Address: ANY
     Port: 7778
Origin Servers:
     Host: server2.domain.com
     Port: 7778
     Routing: enabled
     Ping URL: /
     Protocol: HTTP
Site definitions (two entries)
     Hostname: server1.domain.com
     Port: 80
     URL Path Prefix: (blank)
     Default: No
     Aliases (Host Name: None, Port: N/A, URL Path Prefix: N/A)
     Hostname: server2.domain.com
     Port: 7778
     URL Path Prefix: /
     Default: No
     Aliases (Host Name: None, Port: N/A, URL Path Prefix: N/A)
Site to Server Mapping:
     Site                    Origin Server
Priority Host Name     Port URL Path Prefix ESI Content Policy Host Name     Port
1 server2.domain.com 8300 /appname1/ Unrestricted      server2.domain.com     7778
2 server2.domain.com 19000 /appname2/ Unrestricted      server2.domain.com     7778
3 server2.domain.com 7777 Unrestricted      server2.domain.com     7778
4     *      7777 Exclude Fragments server2.domain.com     7778
5     *      *           Exclude Fragments server2.domain.com     7778
And in server2.domain.com, the following has been set in httpd.conf
ServerName server2.domain.com
UseCanonicalName On
Port 7777
Listen 7777
Listen 7778
Listen 19000
<VirtualHost server2.domain.com:8300>
     Port 7778
</VirtualHost>
Any advise is appreciated.
Thanks,
Lian

as mentioned above, All that you need is a optical cable (a toslink) and that will provide you with the 5.1 sound output. BUT and this is important, the Game or Movie must support 5.1 for you to get 5.1 sound (not a lot of Mac games have 5.1 output) also you will need to ensure that you setup the right settings on your sound Preference panel. You dont need any additional boxes or cables as long as your 5.1 speaker system accepts 5.1 audio via digital toslink (eg optical cable). the z5500 is suitable and will give you 5.1 sound if used with a game or movie that has 5.1 sound output.
Good luck and enjoy the sound

Dedicated web cache server configration -- Help pls!!!

Similar Messages

Maybe you are looking for