Deductible field in Leave service of ESS

Hi all
We are on ECC 5.0 and Netweaver 2004. In the Leave service there is a tab of Show Leave Balance. When the user clicks the same, his leave balance appears. In the balance display there is a column with the heading Deductible to. Now in this column the value is appearing blank. To my knowledge, the value in DEEND field of IT 2006 should appear. I have checked the service specific setting for ESS in SPRO. However I could not find the reason for the field appearing blank.
Can anyone help me.
Regards
Rajay

Issue is now resolved

Similar Messages

Error while accessing services of ESS/MSS tabs - URGENT

Hi,
When i am accessing the services under ESS, MSS tabs ie, Leave request, My expenses etc.... i am getting the following error.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
User XYZ does not exist in this period:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: User XYZ does not exist in this period
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
     at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.initPernr(FcEmployeeServices.java:257)
     at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.onInit(FcEmployeeServices.java:220)
     at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServices.onInit(InternalFcEmployeeServices.java:249)
     at com.sap.pcuigp.xssutils.pernr.FcEmployeeServicesInterface.onInit(FcEmployeeServicesInterface.java:135)
     at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface.onInit(InternalFcEmployeeServicesInterface.java:183)
     at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface$External.onInit(InternalFcEmployeeServicesInterface.java:243)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.tra.fc.utils.FcTraUtils.onInit(FcTraUtils.java:264)
     at com.sap.xss.tra.fc.utils.wdp.InternalFcTraUtils.onInit(InternalFcTraUtils.java:297)
     at com.sap.xss.tra.fc.utils.FcTraUtilsInterface.onInit(FcTraUtilsInterface.java:122)
     at com.sap.xss.tra.fc.utils.wdp.InternalFcTraUtilsInterface.onInit(InternalFcTraUtilsInterface.java:212)
     at com.sap.xss.tra.fc.utils.wdp.InternalFcTraUtilsInterface$External.onInit(InternalFcTraUtilsInterface.java:428)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.tra.fc.allmytrips.FcTraAllMyTrips.onInit(FcTraAllMyTrips.java:247)
     at com.sap.xss.tra.fc.allmytrips.wdp.InternalFcTraAllMyTrips.onInit(InternalFcTraAllMyTrips.java:543)
     at com.sap.xss.tra.fc.allmytrips.FcTraAllMyTripsInterface.onInit(FcTraAllMyTripsInterface.java:115)
     at com.sap.xss.tra.fc.allmytrips.wdp.InternalFcTraAllMyTripsInterface.onInit(InternalFcTraAllMyTripsInterface.java:348)
     at com.sap.xss.tra.fc.allmytrips.wdp.InternalFcTraAllMyTripsInterface$External.onInit(InternalFcTraAllMyTripsInterface.java:420)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.tra.vc.allmytrips.VcTraAllMyTripsInterface.onInit(VcTraAllMyTripsInterface.java:164)
     at com.sap.xss.tra.vc.allmytrips.wdp.InternalVcTraAllMyTripsInterface.onInit(InternalVcTraAllMyTripsInterface.java:205)
     at com.sap.xss.tra.vc.allmytrips.wdp.InternalVcTraAllMyTripsInterface$External.onInit(InternalVcTraAllMyTripsInterface.java:399)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:772)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:707)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1248)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:353)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:551)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:595)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:723)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I am able to access in QAS but not in DEV or Prod.

VV,
This could be case when the payroll for the user XYZ has not be updated till the current period, in which you are trying to access the ESS or MSS tabs.
You can try this.
1. Go to the transaction - PC00_mxy_CLSTR
where xy refers to the MOLGA or the country coding for which the payroll is run.
Observe there till which period for the user XYZ the payroll has been run.
2. If the payroll has not been run for the current period.
Go to transaction PC00_mxy_CALC and by entering the parameters, run the payroll and try doing the same.
Hope this helps!
Regards.
Sandeep Tudumu

Blank page displaying when clicking on the service in ESS

Hi All,
MyExpenses & Leave Request services under ESS is displaying blank page when i log into the portal with test user. When i log in with my user id , both are opening and working properly.
all the remaining services are working properly. for some users, it is working properly and for some users it is displaying blank page.
To work the service properly with the test user, what properties or authorizations i have to set in portal / backend.
pls post answers. This is the third time i am posting this question. I did not get answers for this... its very urgent issue.
Regards,
Vila.

Hi,
The problem seems to be due to lack of proper authorisation.
Go to Portal content->Contents provided by SAP->Open the permission editor of the folder 'End User Content'.
Therein enter eu_role and check the box corresponding to the end-user. Now assign the users eu_role and ESS role.
If everyone is going to use ESS, then 'End User content' to the Group 'Everyone' with read access and then assign the ESS role to the 'Everyone' group.
Hope this helps !
Regards
Srinivasan T

Half day processing of Leave raised from ESS

Hi ,
We have the a problem in leave request from ESS
EP7
(ERP2005)
How to allow half a day processing of leave request?
even if i enter 4 hours in the duration field
the system takes 8 hours
but when i do the same from PA30 it is ok.
kindly give your valuable suggestions
Thanks
Sera

Hi Sera,
Please check table V_T554S_WEB to make sure the absence type used from ESS is same as absence type you tested from PA30.
Regards,
Jim

Finding the related field for "Leave Type" from the BI content in HR modul

Hi good after-noon!!
Can any one help me out in finding the related field for "Leave Type" from the BI content in HR module?
Regards,
Suman.

Hi Suman ,
U can get the information in KTART field in PA2006 table in SAP. This field can take values like annual leave type, long service leave, study leave etc....
Regards
vamsi

BSP error while applying a Leave request in ESS

Dear Friends,
Reposting an issue which I posted earlier in ESS Forum as I didn't get solution there and the issue is more technical and moved towards Netweaver applications.
While applying a leave request in ESS portal, I am getting an error page saying Business Server Page error.
Checked related SPRO Nodes: Both ESS UI5 and ESS (Java) nodes. They are maintained. Being HCM Functional Consultant, this error I am not able to analyze anyway. So asking Portal /Netweaver experts here.
Error screen attached-
My earlier thread posted in ESS forum
http://scn.sap.com/thread/3675714
Expecting a quick solution for this as I am stuck in this issue for last 4-5 days .
Regards,
Niladri

Sorted out . Detail can be seen in the Referal link. Closing this thread
Regards,
Niladri

While raising Leave Request on ESS: getting warning message displayed

Hi All,
When i am trying to raise a leave request from ESS i am getting the warning message displayed on the page as follows:
"Customizing for employee 00001153 does not exist"
I want this message to be removed.
Is this problem from R/3 end or any configuration needs to be done on ESS ?
Pls let me know how to remove this message.
Regards
Vijay

this message ensues when there is a missing customisation for the pernr, For example :
message is being displayed due to rule group customizing is missing
for a leave '0560' for which a leave record exists on the date
'14th March 2008'.
One possible solution would be to create a record in the customizing or delete the record from the application.
So please check the customisation of the absences, Quotas, rule group etc for this particular employee

Run time error when we click "Leave overview " in ESS - pl help

Hi Gurus ,
We are getting run time error when we
click the 'Leave Overview' in
ESS.
when emloyee applies for leave he may
need to wait for aproval during
that time he cannot access the 'leave
overview' screen he will be
facing run time error .
because of this run time error system
performance become very slow .
please help me .i will give points for valid answers .
:-Suneetha reddy

Hi ,
I am soory for late reply ,
I changed the runtime parameter to 1200 and monitaring the system .
Now there is no Run time error but still Leave overview is taking time .
Please help
Thanks,
Sunitha

Run time error iview 'Leave Overview' in ESS - Pl Help

Hi Gurus ,
We are getting run time error when we
click the 'Leave Overview' in
ESS.
when emloyee applies for leave he may
need to wait for aproval during
that time he cannot access the 'leave
overview' screen he will be
facing run time error .
because of this run time error system
performance become very slow .
please help me .i will give points for valid answers .
:-Suneetha reddy
Edited by: Sunitha Reddy on Mar 26, 2008 9:47 AM

Hi ,
I am soory for late reply ,
I changed the runtime parameter to 1200 and monitaring the system .
Now there is no Run time error but still Leave overview is taking time .
Please help
Thanks,
Sunitha

How to create a Tip for a field in a Descriptive Flex Field in Self Service

How to create a Tip for a field in a Descriptive Flex Field in Self Service ?
Example :
For Address
Each Address Line should have one Tip.
What should I do ?
Thanks,
John

Hi John,
It seems you have created Address Location DFF in self service in OA Framework.....
I have created a Address Location flex in OA Framework . It dipslays the segments properly but i dont want to display the segments if they dont have any value.
I only want to display segments with values . The segments with null values should not display at all...
i.e , if Address Line 2 value is null , it should not display Address Line 2..
If you have done this, pls let me know how to go abt it.
Thanks in Advance,
Tanveer

Error in F4 unknown field in structure service profile CRMD_SERWI

Hello,
I just added new Service Profiles and when Im creatin a new Service and adding a Reject service Profile the search field is empty and the message says:
Error in F4 unknown field in structure service profile CRMD_SERWI
Someone know how to analyse WebClient UI search help.
Kind Regards

Hi David,
(even it is very old post am giving an approach which may help others)
If you check the value table, CRMD_SERWI you'll find that there is NO standard Search Help for field SRV_SERWI (Service Profile). So this is the main reason, SAP is not providing any F4 help in WEB UI screen as well , Still you are asked to provide F4 Help. So value table approach would not work.
So try the following approach(do changes according to your requirement)
1. Create one custom Elementary search help (e.g. ZZCUSTF4) in SE11 with following details ---
                            a> Selection Method = CRMD_SERWI_T
                            b> Parameters as --- SRV_SERWI and DESCRIPTION
                            c> For SRV_SERWI , check the Importing Flag and LPos = 1
                            d> For DESCRIPTION, put LPos = 2
2. Now redefine GET_V_propname method in the CNxx class. Please refer the following code (need to change according to your requirement) to trigger your custom F4 Help.
DATA:
         ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
         lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
         lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
       ls_map-context_attr = 'struct.SRV_SERWI'.u201C Screen field's technical name
     ls_map-f4_attr      = SRV_SERWI u201C Field name present in your custom search help, created in step 1.
APPEND ls_map TO: lt_inmap, lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE CL_BSP_WD_VALUEHELP_F4DESCR
    EXPORTING
      iv_help_id        = 'ZZCUSTF4' u201CCUSTOM Search help name created in step 1
      iv_help_id_kind   = f_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_input_mapping = lt_inmap
      iv_output_mapping = lt_outmap.
Hope this helps you.
Thanks & Regards,
Vishnu

Field 'material' in service master data and material requisition

Hello, all!
Could anybody say, what is the purpose of field 'material' in service master data ('other' tab) and why system after setting the object type in that tab to 1 'material' will never show service in search help?
This first question comes from the second problem: I thought that I can make a service group, containing materials and services (like routings in PP), so system will be able to make material requisition for a case in automatical manner.
But now I'm confused. It looks like material requisition can only be made manually throught NMM7.
Is there any abilities to make requisition in automatical manner?
Thanks a lot!
Edited by: Pavel Sidorov on Feb 15, 2008 4:30 PM

Hi Pavel,
ad1) we support the creating of services based on material consumptions via service rules. Users are able to activate services rules which generate services based on the material consumption per case. But we need two entities material and services. Service rules are running automatically and no further manual work is necessary.
You will find the Service rules via IMG -> Patient Billing -> Service Rules. Service Rule R24 is the relevant service rule to generate services based on matierial consumption.
ad2) The field object type is not been used in Patient Management. It is only used by our clinical partner solution i.s.h.med. I understand that this field is confusing and not very well documented. In Patient Management we use the service master only for "services". i.s.h.med uses the field "material" and "personel" (e.g. physicians time). But it has no relevance for Patient Management.
Best regards, Robert
Edited by: Robert Mathiowetz on Feb 28, 2008 2:51 PM

Hide certain services in ESS and MSS

Dear friends
We want to hide certain services in ESS and MSS we are on ECC 6.0 and EP 7.0
In ESS career and job, purchasing, work environment, life and work events, corporate information
In MSS we want to hide Budget, Projects, Planning
In Team also we want to hide services like employee working time (approve time sheet data), performance management, competency management, hcm process and forms, in recruitment (create new candidate assessment), organization
Please let me know where and how to hide these services in ESS and MSS
Thank you

Hello,
For hiding the links in both ESS and MSS, you need to make changes in Home Page Framework.
For this go to transaction SPRO and navigate to
Cross-Application Components - Home page Framework.
I suggest not to delete the standard one instead see and create new iView with new parameters.
Hope this helps.
Cheers-
Pramod

How to implement "my appraisals" service in ESS ?

hi,
i am configuring ESS in EP 6.0. My back end system is MySAP ERP. i wanted to implement "My Appraisals" service in ESS but i dont see any iview for it . Can anyone tell me how to implement it in ESS?
regards,
aditi

Hi Aditi
if u dont' found ZEMPLOYEE_CAREER_MBO (customer specific)
crate ur own by following
spro ->IMG ->cross-application components ->Homepage Framework-> resources ->define resources ->define resources (add entry)
click on new entry
specifi the following
resource key -
>ZEMPLOYEE_CAREER_MBO
description -
>Appraisals In Process
object name----->hap_document/documents_todo.htm
url of pcd page-->pcd:portal_content/com.sap.pct/every_user/com.sap.pct.ess.employee/com.sap.pct.ess.roles/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.area_career_job/com.sap.pct.ess.bsp_career_job
save ur entry. release the request.
now create the service.
spro ->IMG ->cross-application components ->Homepage Framework-> services->define services->define services(add entry)
click on new entry specifie following
service key -->EMPLOYEE_CAREER_APPRAISALS
service link text-->Appraisals
service type--->service build with BSP
link resource--->ZEMPLOYEE_CAREER_MBO
save ur entry.
now click on assign services to subarea->Assign Services to Subareas (Find Entries)
create new entry.
subarea key---->EMPLOYEE_CAREER_SUBAPPRAISALS
service key short---->EMPLOYEE_CAREER_APPRAISALS
position--->1
if u have any query revert back
regards,
kaushal

Field Mandatory in Service Entry Sheet

Dear all
Kindly let me know How to Make the following Field Mandatory in Service Entry Sheet
"Quality of service" & "Service timeliness" in Vendor Evaluation Tab

hi
MM->ext ser mangmt->define screen layout->
go to field selection key ML81
in that go to Entry sheet (field sel group)option
there u will find vendor evaluation options
there u acn set as mandatory .
ok
if its ok
assign points
nani

Deductible field in Leave service of ESS

Similar Messages

Maybe you are looking for