Deduplication Event ID 8204
Can someone explain what this means?
Data Deduplication has aborted a group commit session.
File count: 1
Error: 0x80565351, An error was discovered while deduplicating the file. The file is now skipped.
Operation:
Running the deduplication job.
Context:
Stream map: 00390000000003e7.00140002000dc000:00000016:00100008:0000b9c8:00000000:5b7706ce81e121acfd487c68171d035244e2cc8d6d423ff80c95de9ebd6c94e0
File path: C:\ClusterStorage\Volume1\Shares\VDI\DesktopStorage\Personal_Desktop\VMP61\Virtual Hard Disks\VMP61.vhdx
Volume name: C:\ClusterStorage\Volume1 (\\?\Volume{7e8c33c8-63dc-44a8-8f4f-5132b27e237e}\)
Hi JustuslV,
I would like to know the vm is built based on Hyper-v or VMWare, if it is based on VMWare, please note Deduplication optimization of open files is supported only for VDI scenarios with Hyper-V using remote storage over SMB 3.0. Deduplication
of open files has not been fully validated for general virtualization or other applications, and additional issues may be encountered.
In addition, The deduplication process will optimize the parts of the VHD file that are older than the selected minimum days defined by the deduplication policy. Running virtual machine VHDs can realize considerable storage savings. Since the VHD file is
keeping update, so the issue may occur.
I also recommend you can go through the Unsupported configurations part in this document "Plan to deploy Data Deduplication":
Plan to Deploy Data Deduplication
Deploying Data Deduplication for VDI storage in Windows Server 2012 R2
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Similar Messages
-
Hi,
Where can all Event ID's relating to Data Deduplication in the Diagnostic, Operational and Scrubbing logs be found?
Thank you.Hi,
As you said currently we do not have an article which help lists all EventID for Deduplication. However you can manually find related event logs by navigating to Applications and Services Logs, click Microsoft,
click Windows, and then click Deduplication.
If you have any feedback on our support, please send to [email protected] -
W2K12-R deduplication optimization job stuck at 100% for days
Hello,
I've W2K12-R server (VM, 4 vCPU, 14 GB vRAM) with a 7 TB D: drive, deduplication is enabled for this drive. I use this drive for backing up virtual machines, at the moment 3,6 TB are used. Each night ~2 TB new data is backed up, only the C: drives of VMs,
so there is a very high dedup rate, these new 2 TB are usually deduplicated during daytimes.
Capacity : 6.64 TB
FreeSpace : 3.01 TB
UsedSpace : 3.63 TB
UnoptimizedSize : 110.74 TB
SavedSpace : 107.1 TB
SavingsRate : 96 %
Since a few weeks I've the problem that ThroughputOptimization jobs (all Optimization jobs) do not finish. The job is able to free space but it stays at 100% for days.
Although I've set the DurationHours to 6 or 9 hours, the scheduled job does not end and thus no new Optimization job starts. That leads to a completely filled D drive because the space that gets filled by backup jobs during the night is not freed during
the planned time frame.
Event Log from the start of the job:
+
System
Provider
[ Name]
Microsoft-Windows-Deduplication
[ Guid]
{F9FE3908-44B8-48D9-9A32-5A763FF5ED79}
EventID
6148
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-07-21T14:20:04.531120000Z
EventRecordID
2768
Correlation
Execution
[ ProcessID]
4672
[ ThreadID]
268
Channel
Microsoft-Windows-Deduplication/Operational
Computer
xxxxxx.net
Security
[ UserID]
S-1-5-18
EventData
JobType
1
JobInstanceId
{39D260C4-32D0-4511-8982-598DA53DB423}
VolumeGuidPath
\\?\Volume{27fe6999-df3b-4864-81fe-853126e2c9cc}\
VolumeDisplayName
D:
AvailableMemoryMb
11058
JobPriorityType
3
I don't see further information about job 39D260C4-32D0-4511-8982-598DA53DB423 in event log. In resource monitor I see that fsdmhost has very little disk activity (600 Bytes/s), but a cpu load of 25% (which is one of the four vCPUs).
I stopped the backups this week and started a manual full Optimization job, which stays at 100% since more than one day now.
Any ideas what to check? Any patch I can apply?
Some details:
23.07.014 - 8:40 Uhr
Get-DedupStatus
FreeSpace SavedSpace OptimizedFiles InPolicyFiles Volume
3.01 TB 107.1 TB 12232 12232 D:
Get-DedupStatus | fl
Volume : D:
VolumeId : \\?\Volume{27fe6999-df3b-4864-81fe-853126e2c9cc}\
Capacity : 6.64 TB
FreeSpace : 3.01 TB
UsedSpace : 3.63 TB
UnoptimizedSize : 110.74 TB
SavedSpace : 107.1 TB
SavingsRate : 96 %
OptimizedFilesCount : 12232
OptimizedFilesSize : 110.58 TB
OptimizedFilesSavingsRate : 96 %
InPolicyFilesCount : 12232
InPolicyFilesSize : 110.58 TB
LastOptimizationTime : 23.07.2014 04:44:59
LastOptimizationResult : 0x8056533D
LastOptimizationResultMessage : The operation was cancelled.
LastGarbageCollectionTime : 20.07.2014 05:26:12
LastGarbageCollectionResult : 0x00000000
LastGarbageCollectionResultMessage : The operation completed successfully.
LastScrubbingTime : 20.07.2014 16:06:29
LastScrubbingResult : 0x00000000
LastScrubbingResultMessage : The operation completed successfully.
Get-DedupVolume
Enabled UsageType SavedSpace SavingsRate
Volume
True Default 107.1 TB 96 %
D:
Get-DedupVolume |fl
Volume : D:
VolumeId : \\?\Volume{27fe6999-df3b-4864-81fe-853126e2c9cc}\
Enabled : True
UsageType : Default
DataAccessEnabled : True
Capacity : 6.64 TB
FreeSpace : 3.01 TB
UsedSpace : 3.63 TB
UnoptimizedSize : 110.74 TB
SavedSpace : 107.1 TB
SavingsRate : 96 %
MinimumFileAgeDays : 0
MinimumFileSize : 32768
NoCompress : False
ExcludeFolder :
ExcludeFileType :
ExcludeFileTypeDefault : {edb, jrs}
NoCompressionFileType : {asf, mov, wma, wmv...}
ChunkRedundancyThreshold : 100
Verify : False
OptimizeInUseFiles : False
OptimizePartialFiles : False
Get-DedupMetadata | fl
Volume : D:
VolumeId : \\?\Volume{27fe6999-df3b-4864-81fe-853126e2c9cc}\
StoreId : {1E87DD60-0265-4726-9EDD-81FCE4E9D70A}
DataChunkCount : 151954987
DataContainerCount : 3983
DataChunkAverageSize : 24.35 KB
DataChunkMedianSize : 0 B
DataStoreUncompactedFreespace : 0 B
StreamMapChunkCount : 95398
StreamMapContainerCount : 1944
StreamMapAverageDataChunkCount :
StreamMapMedianDataChunkCount :
StreamMapMaxDataChunkCount :
HotspotChunkCount : 1048520
HotspotContainerCount : 54
HotspotMedianReferenceCount :
CorruptionLogEntryCount : 0
TotalChunkStoreSize : 3.6 TB
Get-DedupSchedule
Enabled Type StartTime Days
Name
True Optimization
BackgroundOptimization
False GarbageCollection 07:30 {Monday, Tuesda... DailyGarbageCollection
True Optimization 09:00 {Sunday, Monday... ThroughputOptimization
False Optimization 14:30 {Sunday, Monday... ThroughputOptimization-2
True GarbageCollection 16:00 Saturday WeeklyGarbageCollection
True Scrubbing 03:45 Sunday
WeeklyScrubbing
Get-DedupSchedule | fl
Name : BackgroundOptimization
Enabled : True
Type : Optimization
Days :
Start :
DurationHours :
StopWhenSystemBusy : True
Memory : 25 %
Priority : Low
InputOutputThrottleLevel : Low
ScheduledTask : \Microsoft\Windows\Deduplication\BackgroundOptimization
Full :
ReadOnly :
Name : DailyGarbageCollection
Enabled : False
Type : GarbageCollection
Days : {Monday, Tuesday, Wednesday, Thursday...}
Start : 17.06.2014 07:30:00
DurationHours : 0
StopWhenSystemBusy : False
Memory : 50 %
Priority : Normal
InputOutputThrottleLevel : None
ScheduledTask : \Microsoft\Windows\Deduplication\DailyGarbageCollection
Full : False
ReadOnly : False
Name : ThroughputOptimization
Enabled : True
Type : Optimization
Days : {Sunday, Monday, Tuesday, Wednesday...}
Start : 14.07.2014 09:00:00
DurationHours : 6
StopWhenSystemBusy : False
Memory : 40 %
Priority : Normal
InputOutputThrottleLevel : None
ScheduledTask : \Microsoft\Windows\Deduplication\ThroughputOptimization
Full : False
ReadOnly : False
Name : ThroughputOptimization-2
Enabled : False
Type : Optimization
Days : {Sunday, Monday, Tuesday, Wednesday...}
Start : 14.07.2014 14:30:00
DurationHours : 9
StopWhenSystemBusy : False
Memory : 40 %
Priority : Normal
InputOutputThrottleLevel : None
ScheduledTask : \Microsoft\Windows\Deduplication\ThroughputOptimization-2
Full : False
ReadOnly : False
Name : WeeklyGarbageCollection
Enabled : True
Type : GarbageCollection
Days : Saturday
Start : 20.06.2014 16:00:00
DurationHours : 26
StopWhenSystemBusy : True
Memory : 50 %
Priority : High
InputOutputThrottleLevel : None
ScheduledTask : \Microsoft\Windows\Deduplication\WeeklyGarbageCollection
Full : True
ReadOnly : False
Name : WeeklyScrubbing
Enabled : True
Type : Scrubbing
Days : Sunday
Start : 17.05.2014 03:45:00
DurationHours : 0
StopWhenSystemBusy : True
Memory : 50 %
Priority : Normal
InputOutputThrottleLevel : None
ScheduledTask : \Microsoft\Windows\Deduplication\WeeklyScrubbing
Full : True
ReadOnly : False
Get-DedupJob
Type ScheduleType StartTime Progress State
Volume
Optimization Scheduled 0 %
Queued D:
Optimization Manual 16:20 100 %
Running D:
Get-DedupJob |fl
Volume : D:
VolumeId : \\?\Volume{27fe6999-df3b-4864-81fe-853126e2c9cc}\
Type : Optimization
ScheduleType : Scheduled
StartTime :
Progress : 0 %
State : Queued
Id : {556DC9B2-068C-4CAE-9BE7-4104A0963F49}
StopWhenSystemBusy : True
Memory : 25 %
Priority : Low
InputOutputThrottleLevel : Low
ProcessId : 0
Full : False
ReadOnly : False
Volume : D:
VolumeId : \\?\Volume{27fe6999-df3b-4864-81fe-853126e2c9cc}\
Type : Optimization
ScheduleType : Manual
StartTime : 21.07.2014 16:20:04
Progress : 100 %
State : Running
Id : {39D260C4-32D0-4511-8982-598DA53DB423}
StopWhenSystemBusy : False
Memory : 60 %
Priority : High
InputOutputThrottleLevel : None
ProcessId : 4672
Full : True
ReadOnly : FalseI stopped the manually started optimization job now and see these event log entries.
Data Deduplication job type "Optimization" on volume "D:" was cancelled manually.
Data Deduplication job of type "Optimization" on volume "D:" has completed with return code: 0x8056533d, The operation was cancelled.
Optimization reconciliation has completed.
Volume: D: (\\?\Volume{27fe6999-df3b-4864-81fe-853126e2c9cc}\)
Reconciled containers: 1908
Unreconciled containers: 36
Merged containers: 0
Total reconciled references: 0
Error code: 0x0
Error message: NULL
Optimization job has completed.
Volume: D: (\\?\Volume{27fe6999-df3b-4864-81fe-853126e2c9cc}\)
Error code: 0x0
Error message:
Savings rate: 96
Saved space: 117761059523158
Volume used space: 3988537147392
Volume free space: 3312769826816
Optimized file count: 12232
In-policy file count: 12232
Job processed space (bytes): 1815468262325
Job elapsed time (seconds): 150522
Job throughput (MB/second): 11.5 -
Dedup error "File Server Deduplication encountered corruption"
Volume : E:
VolumeId : \\?\Volume{62a68939-8f4a-43af-b66b-b1198a9bd0aa}\
Capacity : 40.87 TB
FreeSpace : 17.05 TB
UsedSpace : 23.82 TB
UnoptimizedSize : 60.85 TB
SavedSpace : 37.03 TB
SavingsRate : 60 %
OptimizedFilesCount : 8286671
OptimizedFilesSize : 37.03 TB
OptimizedFilesSavingsRate : 100 %
InPolicyFilesCount : 8286717
InPolicyFilesSize : 37.03 TB
LastOptimizationTime : 12/15/2013 5:30:20 AM
LastOptimizationResult : 0x00000000
LastOptimizationResultMessage : The operation completed successfully.
LastGarbageCollectionTime : 12/15/2013 5:42:29 AM
LastGarbageCollectionResult : 0x80565352
LastGarbageCollectionResultMessage : File Server Deduplication encountered corruption while enumerating chunks in a
chunk store.
LastScrubbingTime : 12/15/2013 9:02:04 AM
LastScrubbingResult : 0x00000000
LastScrubbingResultMessage : The operation completed successfully.
Notice the Garbage Collection. Can someone advice what i should do? This is on a Raid 6 setup that has had no issues.Hi,
Is there any error message in the event log? Even with RAID and redundancy implemented in your system, data corruption risks still exist. Please refer to the article below about Reliability and Risk Mitigations to troubleshoot the issue:
Introduction to Data Deduplication in Windows Server 2012
http://blogs.technet.com/b/filecab/archive/2012/05/21/introduction-to-data-deduplication-in-windows-server-2012.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Are deduplication BS methods usable if deduplication is disabled for the OM/BC?
Good evening,
I plan to use Oracle EDQ as data quality provider for a Siebel CRM installation (>= 8.1.1.10).
And, I want to use the Deduplication Business Service Methods, in order to determine if records delivered via interfaces are duplicates or not.
The deduplication functionality (OM parameter, ...) needs to be disabled in that specific object manager where I will use the Deduplication Business Service Methods.
Does anyone know if the Deduplication Business Service Methods can be used if the deduplication functionality is disabled for a BC, as well as for the entire object manager?
Thanks,
danielYou should be able to get some more precise information from your Xorg logs, but I would bet it is related to the evdev driver. Some of the options in your xorg.conf no longer work with the latest version. For now you should be able to either map your mouse directly to the appropriate /dev/event* entry or change to the standard mouse driver, both of those methods should be in the wiki.
You are supposed to be able to use the evdev driver without the input section of your xorg.conf by using dbus/hal autodetection, but AFAIK at the moment the xorg-server package still isn't compiled with hal support, so you would have to patch and rebuild the package. -
Windows 2012 R2 Deduplication Garbarge Collection eats up space
I have enabled Deduplication on a volume and it's running for a couple of weeks now. Backups are stored on this volume and dedup is doing a good job on this data (Weekly full backups + incrementals).
But when the weekly garbage collection runs, it claims all free space and the job get cancelled when the disk is full (or memory is low). It's going down from 600GB to 50GB. The following event is logged:
Event ID: 4143
Description:
Data Deduplication cancelled job type "Garbage Collection" on volume "\\?\Volume{55bdbbaf-af4f-431f-878e-c6ead208b86c}\". Memory resource is running low on the machine or in the job.
If i run a Full Optimization afterwards, the space is freed again.
Any idea what is happening? Is garbage collection trying to unoptimize some files or something?
Currently running Full Optimization, but here's the volume info:Volume : E:
VolumeId : \\?\Volume{55bdbbaf-af4f-431f-878e-c6ead208b86c}\
Enabled : True
UsageType : HyperV
DataAccessEnabled : True
Capacity : 2.7 TB
FreeSpace : 395.41 GB
UsedSpace : 2.31 TB
UnoptimizedSize : 11.85 TB
SavedSpace : 9.54 TB
SavingsRate : 80 %
MinimumFileAgeDays : 0
MinimumFileSize : 32768
NoCompress : False
ExcludeFolder :
ExcludeFileType :
ExcludeFileTypeDefault : {bin, vsv, slp, xml...}
NoCompressionFileType : {asf, mov, wma, wmv...}
ChunkRedundancyThreshold : 100
Verify : False
OptimizeInUseFiles : False
OptimizePartialFiles : TrueGuess it's trying to unseal and move some content away from previously sealed dedupe containers stored in-between NTFS metadata objects. And runs out of memory eventually. Throw in some more spindles, grow volume and see would it make any difference.
StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
Deduplication: There is insufficient disk space to perform the requested operation
Hello,
on my Win2012R2 Fileserver is a 550GB disk with userdrives.
I startet Data Deplication but after 100 Optimized Files the job stopped and I cannot start it again.
If I check the Event Log I find:
Data Deplication could not initialize change log under \\?\Volume{ID}}.... The error code was 0x8056530a, There is unsufficient disk space to perform the requested operation. (Event ID 4119)
Then I tried to unoptimize the files with Start-DedupJob -type Unoptimization -volume "E:" but I got another error:
HRESULT 0x8056533a, This kon will not run at the scheduled time because it requires more memory than is currently available.
On the 550GB disk I have about 140GB free diskspace.
The server have 8GB RAM and use 2,3GB at the moment.
CPU is at 0-2%
SYSTEM have full access on the drive, there is no SWAP or boot file on it.
Any more ideas?
I already tried a reboot... ;)
Thanks.
bye ManuelHi Sophia,
KB3000850 is installed, the server restarted. But I'm sorry to say, same situation:
PS C:\Windows\system32> Enable-DedupVolume "E:"
Enabled UsageType SavedSpace SavingsRate
Volume
True Default 26.95 MB 0 %
E:
PS C:\Windows\system32> Start-DedupJob -type Optimization -volume "E:" -wait
Type ScheduleType StartTime Progress State
Volume
Optimization Manual
0 % Failed E:
Eventlog:
ID 4119
Data Deduplication could not initialize change log under \\?\Volume{7a4277ad-72ee-11e4-80bf-0050569d1d6b}\System Volume Information\Dedup\Logs. The error code was 0x8056530a, There is insufficient disk space to perform the requested operation.
ID 4106
Data Deduplication warning: Available memory (4095 MB) is less than minimum required (4392 MB)
Error: 0x00000000, The operation completed successfully.
Volume E: is 549 GB and have 186 GB free
Memory is 2,6/8,0 GB at the moment
Best regards,
Manuel -
Shadow copies issues with Windows Server 2012 R2, deduplication and defragmentation
Hello,
I have a virtual Windows Server 2012 R2 with a data volume with deduplication and shadow copies enabled.
During this weekend some Windows process deleted all the shadow copies and I don't know what process has caused this issue.
After taking a look at Internet forums it seems that could be related to defragmentation process and cluster size but if I review the logs it seems that shadow copies deletion is during some deduplication optimization process (Background Optimization, WeeklyGarbageCollection
and WeeklyScrubbing) and 1 hour after defragmentation.
The related events are a lot of volsnap 33 and finishing with volsnap 36.
Any help would be appreciated.
Thank you.Hi Ricard,
Above all, here is a long discussion about a "losing all volume shadow copy" issue:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/204e8cce-cd1f-4ca2-852e-a5f09a77c04c/volsnap-event-id-25-and-loss-of-previous-backups?forum=windowsbackup
As it mentioned, it could be caused by disk I/O. When you have high input/output traffic on the original volume, the shadow copy storage area cannot grow fast enough to hold all the copy-on-write changes. This causes deletion of all the shadow copies on the
original volume.
Deduplication will cause a high disk I/O for sure so it could be the cause of this issue.
Here are some suggestions for this issue:
a. Put the shadow copy storage on another volume, even if the volume is located on the same hard disk.
b. Make sure that the volume that causes the issue is not the same volume that contains the paging file. If it contains paging file, consider putting the paging file on another volume.
c. Make sure that the volume is not used as the shadow copy storage for any other volume.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Training and Event Management - report on list of cancelled courses
Hi All,
Is there any standard report available to get the list of cancelled courses (be it business event grp , type or business event) Would appreciate your inputs on this.
Kind regards
SathyaS_AHR_61016216 - Cancellations per Attendee , i think there is no standard report for cencelation of business events, type and group.
for cancellations per attendee reports is available in the system.
good luck
Devi -
How can I see Calendar event END times at a glance?
How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback -
Event List view in iCal?
I would love to have an Event List view in iCal like I do on the calendar on my iPhone. Is there such a thing? The particular reason for wanting it (this time) is that one of the calendars in the ON MY MAC list has a number in a oval to the right.
I believe this is trying to tell me that there is a new event that I need to do something about. Problem is, I don't know where to find it.ecernek,
There is no event list option on iCal like the one on the iPhone.
That number means that you have an event invitation. Use iCal>View>Show Notifications to choose what to do with the notification. -
In the Monthly view of iCal the only events that show a color bar in the event is the Birthday Calendar. All other events in all my other calendars only show a color bullet next to the event (unless I click on that event which then shows as a color bar). I would like to know if it is possible for all the calendar events to have a color bar in the monthly view instead of just that tiny color bullet.
Greetings Judith,
Before making any attempts at deleting calendar data, backup what you have just in case:
Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
iCal has an automated function located in iCal > Preferences > Advanced > Delete events "X" days after they have passed. By typing in a value for days you can tell iCal to delete all events before that time frame.
Example:
Today is 4-16-2012.
If I wanted to delete all events prior to 1 year ago (4-16-2011) I would type in "365" for the number of days.
Once you type in the number of days you want kept in iCal, close the preferences and then quit iCal.
Re-open iCal and check to see if the events are gone. If not you may want to leave it open for several minutes and then quit again.
Once the events are removed go back to iCal > Preferences > Advanced > Delete events "X" days after they have passed and make sure the check mark is removed to prevent future deletion.
Hope that helps. -
Can you show at a glance which event images are in albums?
Say I had an event containing multiple similar but different images, is there a way to show in the grid view for example which images have already been used in one or more albums?
Would be handy to be able to select a 'show list of albums containing this image'dialogue box. I guess you could hide images you've used but that wouldn't work automatically, nor would any other tagging/rating.
Another approach would be to make albums containing everything in a given event, then move the images out of that album once used, just seems fiddly to me.
ACAC
Would be handy to be able to select a 'show list of albums containing this image'dialogue box.
Yes it would and many people have suggested tit. Add your voice to the chorus at iPhoto Menu -> Provide Apple Feedback.
A workaround - and it's no better - is to go to an album and select al, then give all those pics a keyword. Then in grid view you can see which pics have the keyword. (View -> Keywords)
Regards
TD -
Unable to capture startup and shutdown event of Photoshop in automation Plugin.
Hi,
I am creating an automation plugin and I want to register some events. I have seen listener plugin sample to register event in startup and unregister event in shutdown. I have used same code in my plugin but I am unable to capture the startup nad shutdown event of Photoshop. On clicking the menu item of my plugin the calls come inside the AutoPluginMain but during the startup or shutdown of plugin, the calls does not come inside the AutoPluginMain.
I am unable to detect the cause of the problem. Can someone please giude me??
Thanks in advance.Hi Tom,
Thanks for the suggestion.
Yes, I am working on Windows. As you suggested, I compiled .rc file but the compile option for .r file was disabled. After compiling the .rc file, I again rebuild the complete project and tested my build. But still I was not able to achive the desired result.
Any other thing that I need to do to make it work?
Thanks -
Unable to capture button event in pageLayout Controller
Hi Guys,
I have the following layout
pageLayout
pageLayoutCO (controller)
----header (Region)
----------messageComponentLayout (Region)
-----------------MessageLovInpurt
-----------------MessageChoice(Item)
-----------------MessageTextInput
-----------------MessageLayout
----------HideShow (Region)
-----------------MessageLovInpurt(Item)
-----------------MessageChoice(Item)
-----------------MessageTextInput(Item)
-----------MessageComponentLayout (Region)
-----------------MessageLayout
------------------------SubmitButton(ID:SearchBtn)
------------------------SubmitButton(ID:ClearBtn, fires partial action named clear)
-----------header(Region)
I am not able to capture the event fired by the button ClearBtn in the controller of the pagelayout.....
The two methods I used as follows aren't worked:
if ("clear".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
if (pageContext.getParameter("ClearBtn") != null) {
what should i do in order to capture the button event in the pageLayout Controller
Thanks in advance
Mandy
Edited by: user8898100 on 2011-8-2 上午7:49Mandy,
Its really strange that its not able to caputure the event in CO.
Below is the way in which we handle to Submit action at CO level.
/Check whether ClearBtn is same in case too.
if(pageContext.getParameter("ClearBtn")!=null){
System.out.println("Inside the Clear Btn Action");
Regards,
Gyan
Maybe you are looking for
-
Generate SSRS Report and save as PDF in SharePoint
Hi, I am working on a SharePoint 2010 Visual WebPart that lets a user click a button to generata a SSRS report and save the report in a SharePoint Library as a PDF file. Code is mentioned below: try string siteContext = SPContext.Current.Web.Url; st
-
MB and world travel adapter kit
I'm thinking about buying a MB for use in travel. I have a world travel adaptor kit, but I notice the store page specifically does not list the kit as supporting the regular MB (it lists the MB Pro, iPods, etc.). Does this mean the kit is not recomme
-
Hi, Can anyone please let me know whether we have a separate forum group for OUCSS? If not, which one among the below is the appropriate group to post the questions related to OUCSS? . Oracle Utilities . Webcenter Portal Thanks,
-
Why isn't Calendar showing me directions in OSX Mavericks?
I recently upgraded to Mavericks on my macbook pro. I wanted to use the new calendar feature that showed you the location and route to an appointment. However, when I add a location to the "add location" part of the calendar event, nothing happened,
-
I have one query in outlook primary mailbox it is showing recover deleted items,but when i have added aditional mailbox my outlook it is not showing,Please help me on this query. Manoj Sahoo