Deduplication: There is insufficient disk space to perform the requested operation

Hello,
on my Win2012R2 Fileserver is a 550GB disk with userdrives.
I startet Data Deplication but after 100 Optimized Files the job stopped and I cannot start it again.
If I check the Event Log I find:
Data Deplication could not initialize change log under \\?\Volume{ID}}.... The error code was 0x8056530a, There is unsufficient disk space to perform the requested operation. (Event ID 4119)
Then I tried to unoptimize the files with Start-DedupJob -type Unoptimization -volume "E:" but I got another error:
HRESULT 0x8056533a, This kon will not run at the scheduled time because it requires more memory than is currently available.
On the 550GB disk I have about 140GB free diskspace.
The server have 8GB RAM and use 2,3GB at the moment.
CPU is at 0-2%
SYSTEM have full access on the drive, there is no SWAP or boot file on it.
Any more ideas?
I already tried a reboot... ;)
Thanks.
bye Manuel

Hi Sophia,
KB3000850 is installed, the server restarted. But I'm sorry to say, same situation:
PS C:\Windows\system32> Enable-DedupVolume "E:"
Enabled            UsageType          SavedSpace           SavingsRate
Volume
True               Default            26.95 MB             0 %
E:
PS C:\Windows\system32> Start-DedupJob -type Optimization -volume "E:" -wait
Type               ScheduleType       StartTime              Progress   State
Volume
Optimization       Manual
0 %        Failed                 E:
Eventlog:
ID 4119
Data Deduplication could not initialize change log under \\?\Volume{7a4277ad-72ee-11e4-80bf-0050569d1d6b}\System Volume Information\Dedup\Logs. The error code was 0x8056530a, There is insufficient disk space to perform the requested operation.
ID 4106
Data Deduplication warning: Available memory (4095 MB) is less than minimum required (4392 MB)
Error: 0x00000000, The operation completed successfully.
Volume E: is 549 GB and have 186 GB free
Memory is 2,6/8,0 GB at the moment
Best regards,
Manuel

Similar Messages

There is insufficient disk space to install the basic content

I downloaded latest GB after installation, when trying to start GB i get the error message "There is insufficient disk space to install the basic content"

petervan wrote:
get the error message "There is insufficient disk space to install the basic content"
you'll need to make room on your drive by deleting some files

Unable to perform a V2V to a CSV in Virtual Machine Manager if there is insufficient disk space on the local drive

Server 2012 R2 with 60 Gb SSD mirror
http://support.microsoft.com/kb/2685247
does not work, as the attached vhdx storage never appears as volume in VMM / Fabric / Host / Properties / Storage
Disk shows there, but no volume (even one was created)
VMM / Fabric / Host / Properties / hardware / Storage there is NO vhdx disk for "Making the
new storage Available for Placement in VMM"
Any other ideas?
Seb

Hi Sophia,
KB3000850 is installed, the server restarted. But I'm sorry to say, same situation:
PS C:\Windows\system32> Enable-DedupVolume "E:"
Enabled            UsageType          SavedSpace           SavingsRate
Volume
True               Default            26.95 MB             0 %
E:
PS C:\Windows\system32> Start-DedupJob -type Optimization -volume "E:" -wait
Type               ScheduleType       StartTime              Progress   State
Volume
Optimization       Manual
0 %        Failed                 E:
Eventlog:
ID 4119
Data Deduplication could not initialize change log under \\?\Volume{7a4277ad-72ee-11e4-80bf-0050569d1d6b}\System Volume Information\Dedup\Logs. The error code was 0x8056530a, There is insufficient disk space to perform the requested operation.
ID 4106
Data Deduplication warning: Available memory (4095 MB) is less than minimum required (4392 MB)
Error: 0x00000000, The operation completed successfully.
Volume E: is 549 GB and have 186 GB free
Memory is 2,6/8,0 GB at the moment
Best regards,
Manuel

Acrobat X Pro Error when Save As JPEG: Insufficient Disk Space to Perform Operation

Using Acrobat X Pro when trying to save a PDF as an Image - JPEG format, the Acrobat application fails with an error: "Acrobat could not save a page in this document because of the following error: Insufficient disk space to perform the operation (Page 1)". Please help with a solution to this problem. The problem is not because of insufficient disk space on my PC.

Thank you for the reply.
Please can you help with the location of the TEMP folder and which temporary files to delete (file type/extension). Each of the these folders include an "Adobe" Folder. Each "Adobe" folder size is less than 1MB.
I am using Windows 8.1 Enterprise 64-bit. I have the following Adobe Acrobat applications installed: Distiller X, X Pro and Reader XI. Is this combination perhaps causing the problem?

PXI-1031 Realtime no longer working with labview. "Insufficient disk space to perform backup"

The realtime labview project was working until a couple weeks ago and the only error that is being shown on the PXI is this error message.
"NI Configuration Manager: Insufficient disk space to perform backup" Everything before that looks like it's starting up just fine. I recently removed the hard drive and deleted the 4gb network log file because it seemed that a 4gb file on a fat32 file system was probably causing the problem. After doing this the project worked when I tested it but others in my lab said that it was broken again the next day.
Any help would be greatly appreciated because I'm not all that familiar with the equipment.
Solved!
Go to Solution.

In this situation, we actually want the PXI controller to be in safe mode. When the controller is reformatted, it will stay in safe mode until the proper software has been installed. Software installation is done from within safe mode, so being stuck there is a good thing.
The networking issues you’re seeing are independent of the controller being in safe mode. Most likely, the network settings were not retained during the reformatting, and your computer needs to reconnect with the device. First, make sure that your computer is set to obtain its IP address automatically. In Windows 7, this can be configured by going to the Network and Sharing Center and clicking on Change adapter settings. From there, right click on Local Area Connection and select Properties, then select Internet Protocol Version 4 (IPv4) and click Properties. In this Window, make sure that Obtain an IP address automatically is selected.
Once this is configured, remove your PXI controller from the chassis and flip the IP reset switch to ON. Put the controller back in the chassis and connect the PXI directly to your computer via an Ethernet cable. When you turn your PXI chassis back on, the chassis and computer should find each other and configure themselves to be on the same subnet. From there, you can set your desired network settings and install the necessary software.
If this doesn’t work, the next step would be to check for any firewalls or antivirus that may be running. These could potentially interfere and block communication.

NI Configuration Manager: Insufficient disk space to perform backup

Hi,
I'm having an issue with my PXI-8110 controller running LabVIEW Real-Time 10.0.1. On start-up, I receive a message is displayed saying "NI Configuration Manager: Insufficient disk space to perform a backup" This message just appeared. Upon starting an FTP session I was able to see that there is only 181 megs of data on the hard drive. In MAX, when I view the system settings of the remote PXI controller, it says that there are 0 bytes available. I'm not sure why this is the case. I'm not able to deploy any Veristand projects to the controller as a result. Has anyone experienced this problem?
Thanks,
Cosimo

Hello WillPwr,
I have now had 2 different systems develop this exact error. After the first occurrence, I assumed that it was a problem with the HD and replaced it. Now, I am starting to worry that there may be an issue with the file management routines in LabVIEW RT. I understand how to fix the issue, but do you have any idea of what causes the issue. In my application, I create a temporary file to store DAQ data then save the data to a log file. After a test is complete, the log file is transferred to a "Host" computer and the process is started again by the user when they initiate a new test. My question: can the continuous creating and deleting of temporary files be causing the file management in the RT system to become corrupt?
It is annoying for a customer to have to go through the process of formatting the hard drive and re-installing the software. Not to mention that it makes the software appear to have issues... Which it may have, but I have been very careful to close and open new files as to not develop open file references.
Any Thoughts?
Big Ev.

Adobe Bridge CS5, error when creating contact sheet "There is insufficient disk space..."

I am running Bridge CS5 for the first time and I receive this error when attempting to create a contact sheet. "There is insufficient disk space to complete this operation." The image files I am using are web optimized and very small. The error even occurs when attempting one small image. I have gone back to using Bridge CS4 and it works just fine. Any help?
Thanks!

I think I narrowed this down to having a network volume mounted with a share name of "Users". The strange thing is even you if unmount the volume you will still have problems. However, if you avoid mounting the volume entirely (from boot) it will be OK.
The solution, it appears, is to rename the sharepoint to something other than "Users". This worked for us. I'm not sure if it matters whether the server is Windows or Mac OS. In our case the sharepoint was an AFP volume on Mac OS.
We had other errors related to Bridge such as "unable to create folder" and the path in the message appeared to be /Users/currentUser/..... which made no sense at all. However, if Bridge was internally trying to use /Volumes/Users (the mounted sharepoint), it would not only not find "currentUser", but it would not have permissions to create that folder either.
So, another possible solution could be to grant file creation rights on the network volume "Users". Another not-so-great idea.
Hope that helps someone else!

Insufficient disk space to perform full backup

Hi to all
i'm trying to backup my acs 5.2 "backup acs repository repository application acs" but acs gives me a critical error.
% Creating backup with timestamped filename: acs-121022-1431.tar.gpg
% Error: Insufficient disk space to perform full backup.
% Try lowering the data window on ACSView Data retention under Data Management Configuration.
% Application backup error
how do i lower the data witdow in ACS view?
thanks in adv
Antero

Hi
the problem is solved now, i've openned a TAC and the cisco Guy told me how to solve it.
in summary you need to have root access to ACS and then erase de acsview database and put a clean one.
my acsview db has grown to 175GB., this was caused by the misconfiguration of acsview database doesn't being backuped and the purgin was, in this case, not being also done.
so Brian if you hav e the same problem then you need to open a TAC case.
Thanks
Antero Vasconcelos

I recently re-loaded iphoto, and now am unable to upload photos from my camera - saying there is insufficient disk space

I recently re-loaded iphoto, and now am unable to upload photos from my camera - saying there is insufficient disk space. does anyone have a solution?

Assuming you have space on your disk, then it could be a symptom of a damaged Library.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

HELP! "Insufficient Disk Space Remaining in the Capture Scratch"?!

Please Help Me ASAP!
im not like lierally dieing but i do need help urgently with Final Cut!
I am trying to capture my video from the camera and the message pops up that says "Insufficient Disk Space Remaining in the Capture Scratch".
So I have 2 questions:
1) What does it mean
2) What do I do to fix it?
im cluless here guys! any input asap would be so greatly appreciated! thanks
Ben

It means that you do not have sufficiant space on your scratch disk to capture your video.
What have you designated as your scratch disk? Which drive? Get Info on that drive to see how much space you have available. When you Capture, your Capture Window will give you info on how much space your drive has, and how much video (in time) you put on it
The solution is to get more space. Like clearing stuff off your drive or getting a new one
If you are capturing video to your system drive, in other words, this is your scratch disk, this is not reccomended. Designate another drive, either internal or firewire external as your scratch disk.
For more info on the scratch disk and how to target it, consult your FC manual and online help

Insufficient disk space remaining in the capture scratch

I’m using a PowerBook G4, 1.25GHz processor with 2 GB DDR SDRAM whit Final Cut Express version 3.5.1. I tried to capture footage from my camera and received a message, “insufficient disk space remaining in the capture scratch.” I moved all the files: Audio render files, Autosave vault, Capture scratch, etc to a new folder on my desk top, but still get the same message when I try to capture. To capture, I click the play button on the screen; hit the mark in button at the point I want to start and the mark out button at the end. Then I click the clip button followed by the ok button on the log clip dialogue box. The program then goes through what I assume to be the capturing process leading to the error message. How do I overcome this? Thank you.

Hi Geoffemn
The solution is to buy an external hard disk. Save the files to that. It does nothing to move the files from AV or scratch disk to a folder on the desk top. It still uses the same amount of space on the Power Book's HD. Of course you can look over current files on the HD and delete ones not needed. But that's a temporary fix. Large HD's have come way down in cost per GB. Go buy one. It should run at a speed of at least 7200 RPM and have firewire.
Carl

Windows Resource Protection could not perform the requested operation.

A close friend's clear the drive clone the drive using gparted
run chkdsk
fix the master boot run chkdsk again
Now all is well
Upon booting I noticed managed to install at a time, even I ran sfc /scannow backed up the existing CBS log
ran sfc /scannow again
watched the log It started out strong
PS C:\Windows\Logs\CBS> 2014-03-06 18:48:33, Info 002.18005_none_676975d87c 2014-03-06 18:48:33, Info @0xffa949a8 @0xffa930c9 2014-03-06 18:48:33, Info @0x7feff3c3feb 2014-03-06 18:48:33, Info @0xffa94207 @0xffa93125 2014-03-06 18:48:33, Info 2014-03-06 18:48:33, Info sition = @0xb8fad0
2014-03-06 18:48:33, Info 2014-03-06 18:48:33, Info 2014-03-06 18:48:38, Info 2014-03-06 18:48:38, Info 2014-03-06 18:48:39, Info POQ 0 starts:
POQ 0 ends.
2014-03-06 18:48:39, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:40, Info POQ 1 starts:
POQ 1 ends.
2014-03-06 18:48:40, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:41, Info POQ 2 starts:
POQ 2 ends.
2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info POQ 3 starts:..... and so on
Until it hit a problem
POQ 34 ends.
2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:09, Info POQ 35 starts:
POQ 35 ends.
2014-03-06 18:49:09, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:10, Info POQ 36 starts:
POQ 36 ends.
2014-03-06 18:49:10, Info 2014-03-06 18:49:11, Info 2014-03-06 18:49:11, Info 2014-03-06 18:49:12, Error ction FileInstaller::CFil [gle=0x80004005]
2014-03-06 18:49:16, Error 2014-03-06 18:49:16, Error 2014-03-06 18:58:33, Info I searched for "[SR]" C:\Windows\system32>findstr 2014-03-06 18:48:38, Info 2014-03-06 18:48:38, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:44, Info 2014-03-06 18:48:44, Info 2014-03-06 18:48:44, Info 2014-03-06 18:48:45, Info 2014-03-06 18:48:45, Info 2014-03-06 18:48:45, Info 2014-03-06 18:48:45, Info 2014-03-06 18:48:46, Info 2014-03-06 18:48:46, Info 2014-03-06 18:48:46, Info 2014-03-06 18:48:47, Info 2014-03-06 18:48:47, Info 2014-03-06 18:48:47, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:49, Info 2014-03-06 18:48:49, Info 2014-03-06 18:48:49, Info 2014-03-06 18:48:50, Info 2014-03-06 18:48:50, Info 2014-03-06 18:48:50, Info 2014-03-06 18:48:50, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:52, Info 2014-03-06 18:48:52, Info 2014-03-06 18:48:52, Info 2014-03-06 18:48:52, Info 2014-03-06 18:48:53, Info 2014-03-06 18:48:53, Info 2014-03-06 18:48:53, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:55, Info 2014-03-06 18:48:55, Info 2014-03-06 18:48:55, Info 2014-03-06 18:48:55, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:57, Info 2014-03-06 18:48:57, Info 2014-03-06 18:48:57, Info 2014-03-06 18:48:58, Info 2014-03-06 18:48:58, Info 2014-03-06 18:48:58, Info 2014-03-06 18:49:00, Info 2014-03-06 18:49:00, Info 2014-03-06 18:49:00, Info 2014-03-06 18:49:00, Info 2014-03-06 18:49:01, Info 2014-03-06 18:49:01, Info 2014-03-06 18:49:01, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:03, Info 2014-03-06 18:49:03, Info 2014-03-06 18:49:03, Info 2014-03-06 18:49:04, Info 2014-03-06 18:49:04, Info 2014-03-06 18:49:04, Info 2014-03-06 18:49:05, Info 2014-03-06 18:49:05, Info 2014-03-06 18:49:05, Info 2014-03-06 18:49:06, Info 2014-03-06 18:49:06, Info 2014-03-06 18:49:06, Info 2014-03-06 18:49:06, Info 2014-03-06 18:49:07, Info 2014-03-06 18:49:07, Info 2014-03-06 18:49:07, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:10, Info 2014-03-06 18:49:11, Info 2014-03-06 18:49:11, Info C:\Windows\system32>
I've run into sfc Is there no way Is that the right Thanks for your time & guidance. machine was blue screening on boot so he had me take a look at it. The error in the BSOD indicated Windows was having trouble reading from the drive. Although the drive wasn't clicking, based on what I was seeing, it seemed pretty
was on its way out. I ran chkdsk, several times, and it found plenty of bad sectors but wasn't able to really fix anything. Fortunately I was able to
record, boot sector and boot configuration data store
the system was dreadfully out of date: Firefox, Java, Reader, Flash - the works - so I updated all that. I also noticed it was missing something like 50-70 Windows updates so I had to straight that right away. It
15-20 before failing with 80070057. This to me isn't too uncommon so I rebooted thinking it wouldn't choke next time. Much to my chagrin, any subsequent attempts fail with error 80070057. I even tried installing just a few updates
just 1, and the error persists. My assumption is that one or more files are maybe damaged and need to be fixed.
and it gets to about 27%, then fails with "Windows Resource Protection could not perform the requested operation." I did the following:
in powershell via Get-Content C:\Windows\Logs\CBS\CBS.log -Wait
Get-Content C:\Windows\Logs\CBS\CBS.log -Wait
CBS Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6
c9b6e6\cbscore.dll
CSI 00000001@2014/3/6:23:48:33.027 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff3f53ae @0x7feff3c3ed1
@0xffa93578)
CSI 00000002@2014/3/6:23:48:33.045 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff4386cf @0x7feff4125d9
@0xffa949a8 @0xffa930c9)
CSI 00000003@2014/3/6:23:48:33.048 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff21838d @0x7feff2184ba
@0xffa93578)
CBS NonStart: Checking to ensure startup processing was not required.
CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDispo
CBS NonStart: Success, startup processing not required as expected.
CSI 00000005 CSI Store 4751600 (0x00000000004880f0) initialized
CSI 00000006 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000007 [SR] Beginning Verify and Repair transaction
CSI 00000008 Repair results created:
CSI 00000009 [SR] Verify complete
CSI 0000000a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000000b [SR] Beginning Verify and Repair transaction
CSI 0000000c Repair results created:
CSI 0000000d [SR] Verify complete
CSI 0000000e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000000f [SR] Beginning Verify and Repair transaction
CSI 00000010 Repair results created:
CSI 00000011 [SR] Verify complete
CSI 00000012 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000013 [SR] Beginning Verify and Repair transaction
CSI 00000014 Repair results created:
CSI 00000091 [SR] Verify complete
CSI 00000092 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000093 [SR] Beginning Verify and Repair transaction
CSI 00000094 Repair results created:
CSI 00000095 [SR] Verify complete
CSI 00000096 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000097 [SR] Beginning Verify and Repair transaction
CSI 00000098 Repair results created:
CSI 00000099 [SR] Verify complete
CSI 0000009a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000009b [SR] Beginning Verify and Repair transaction
CSI 0000009c@2014/3/6:23:49:12.802 (F) d:\longhorn\base\wcp\primitiveinstallers\filehierarchy.cpp(1939): Error STATUS_INVALID_PARAMETER originated in fun
eInstallerHierarchy::PortFileInformationBetweenCdfs expression: TmpBlob.Length == sizeof(LUACDF_FILE_ENTRY)
CSI 0000009d (F) STATUS_INVALID_PARAMETER #2119209# from CFileInstaller::CommitChanges(...)[gle=0xd000000d]
CSI 0000009e (F) STATUS_INVALID_PARAMETER #2119208# from PrimitiveInstaller::CCoordinator::FinalizeChanges(...)[gle=0xd000000d]
CBS Scavenge: Package store indicates there is no component to scavenge, skipping.
but I didn't see anything of great interest
/c:"[SR]" %windir%\logs\cbs\cbs.log
CSI 00000006 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000007 [SR] Beginning Verify and Repair transaction
CSI 00000009 [SR] Verify complete
CSI 0000000a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000000b [SR] Beginning Verify and Repair transaction
CSI 0000000d [SR] Verify complete
CSI 0000000e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000000f [SR] Beginning Verify and Repair transaction
CSI 00000011 [SR] Verify complete
CSI 00000012 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000013 [SR] Beginning Verify and Repair transaction
CSI 00000015 [SR] Verify complete
CSI 00000016 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000017 [SR] Beginning Verify and Repair transaction
CSI 00000019 [SR] Verify complete
CSI 0000001a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000001b [SR] Beginning Verify and Repair transaction
CSI 0000001d [SR] Verify complete
CSI 0000001e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000001f [SR] Beginning Verify and Repair transaction
CSI 00000021 [SR] Verify complete
CSI 00000022 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000023 [SR] Beginning Verify and Repair transaction
CSI 00000025 [SR] Verify complete
CSI 00000026 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000027 [SR] Beginning Verify and Repair transaction
CSI 00000029 [SR] Verify complete
CSI 0000002a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000002b [SR] Beginning Verify and Repair transaction
CSI 0000002d [SR] Verify complete
CSI 0000002e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000002f [SR] Beginning Verify and Repair transaction
CSI 00000031 [SR] Verify complete
CSI 00000032 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000033 [SR] Beginning Verify and Repair transaction
CSI 00000035 [SR] Verify complete
CSI 00000036 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000037 [SR] Beginning Verify and Repair transaction
CSI 00000039 [SR] Verify complete
CSI 0000003a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000003b [SR] Beginning Verify and Repair transaction
CSI 0000003d [SR] Verify complete
CSI 0000003e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000003f [SR] Beginning Verify and Repair transaction
CSI 00000041 [SR] Verify complete
CSI 00000042 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000043 [SR] Beginning Verify and Repair transaction
CSI 00000045 [SR] Verify complete
CSI 00000046 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000047 [SR] Beginning Verify and Repair transaction
CSI 00000049 [SR] Verify complete
CSI 0000004a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000004b [SR] Beginning Verify and Repair transaction
CSI 0000004d [SR] Verify complete
CSI 0000004e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000004f [SR] Beginning Verify and Repair transaction
CSI 00000051 [SR] Verify complete
CSI 00000052 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000053 [SR] Beginning Verify and Repair transaction
CSI 00000055 [SR] Verify complete
CSI 00000056 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000057 [SR] Beginning Verify and Repair transaction
CSI 00000059 [SR] Verify complete
CSI 0000005a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000005b [SR] Beginning Verify and Repair transaction
CSI 0000005d [SR] Verify complete
CSI 0000005e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000005f [SR] Beginning Verify and Repair transaction
CSI 00000061 [SR] Verify complete
CSI 00000062 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000063 [SR] Beginning Verify and Repair transaction
CSI 00000065 [SR] Verify complete
CSI 00000066 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000067 [SR] Beginning Verify and Repair transaction
CSI 00000069 [SR] Verify complete
CSI 0000006a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000006b [SR] Beginning Verify and Repair transaction
CSI 0000006d [SR] Verify complete
CSI 0000006e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000006f [SR] Beginning Verify and Repair transaction
CSI 00000071 [SR] Verify complete
CSI 00000072 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000073 [SR] Beginning Verify and Repair transaction
CSI 00000075 [SR] Verify complete
CSI 00000076 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000077 [SR] Beginning Verify and Repair transaction
CSI 00000079 [SR] Verify complete
CSI 0000007a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000007b [SR] Beginning Verify and Repair transaction
CSI 0000007d [SR] Verify complete
CSI 0000007e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000007f [SR] Beginning Verify and Repair transaction
CSI 00000081 [SR] Verify complete
CSI 00000082 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000083 [SR] Beginning Verify and Repair transaction
CSI 00000085 [SR] Verify complete
CSI 00000086 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000087 [SR] Beginning Verify and Repair transaction
CSI 00000089 [SR] Verify complete
CSI 0000008a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000008b [SR] Beginning Verify and Repair transaction
CSI 0000008d [SR] Verify complete
CSI 0000008e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000008f [SR] Beginning Verify and Repair transaction
CSI 00000091 [SR] Verify complete
CSI 00000092 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000093 [SR] Beginning Verify and Repair transaction
CSI 00000095 [SR] Verify complete
CSI 00000096 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000097 [SR] Beginning Verify and Repair transaction
CSI 00000099 [SR] Verify complete
CSI 0000009a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000009b [SR] Beginning Verify and Repair transaction
issues in the past, and in one instance, booting the OS install DVD, and running sfc /scannow /offbootdir=c:\ /offwindir=c:\windows did fix the issue. But I have to ask
to do that while in Windows? Can't I mount some WIM and do it that way instead of booting the DVD?
course of action, or is/are there some other options I should explore?

Hi,
In my opinion, if you want SFC to use a sourcepath to repair your system, you can just use in-place upgrade to do this:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support
Thanks for taking the time to reply and for this suggestion.
The in-place upgrade is a wonderful potential solution, but the process requires the source media. Most systems these days don't include the OS or recovery CD's because the manufacturers want you to pay for them. And most consumers aren't spending
the $50-$70 dollars to get the media, which complicates things in situations like this. So while they've purchased a machine and have a valid Microsoft COA sticker on the box, they can't do anything.
Also, to make matters worse, I posted this in the wrong forum as this is a Vista Home Premium PC. [My sincere apologies for that. Mods please feel free to move/reclassify] I do have a Vista Home Premium DVD, but its the 32-bit version, not 64-bit,
which is what this system is. So unless I can locate a Visa Home Premium 64-bit DVD, or they upgrade to Windows 7 or 8 (which they probably should do anyway), we're sunk.

Error 58 The specified server cannot perform the requested operation

Hello,
I will try to explain the situation as brief as possible. Next to our current existing MDT environment (MDT2010 on Windows 2008 R2) we are no building a new system (MDT2013 on WIndows 2012 R2). We have multiple sites and the MDT deployment share is setup
in DFRS share so every site is getting the same deployment information and replication is done automatically. This has been working firn for 3 years with the old system and also with the new environment it was working fine in our own subnet. But when after
i have setup the remote MDT and WDS servers it is not working in these remote sites. The images are loading fine but for some reason the win PE is not connecting to the shares on the windows 2012 server in our site. When i manuualy connect from a remote win
PE to our server i always get the error: system error 58 has occured. The specified server cannot perform the requested operation.
I have been doing some troubleshooting and it seems i only got this issue when i connect from win PE 5.0 to a windows 2012 R2 server in a remote subnet.
When i use win PE 5.0 and connect to a windows 2012 R2 share in the same subnet it connects fine.
When i use win PE 5.0 and connect to a windows 2008 R2 share in a remote subnet it connects fine
When i use an older win PE and i connect to a windows 2012 R2 share in a remote subnet it connects fine
When i use win PE 5.0 and connect to a windows 2012 R2 share in a remote subnet it does NOT connect and gives the above error
The problem is that this problem also does not occure in Windows 7, after the machine was build by MDT and get into the OS i can connect without a problem to the windows 2012 R2 shares.
Checking the event viewer on the 2012 R2 server that is hosting the shares i see that the following events are created:
4624: An account was successfully logged on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Impersonation Level: Impersonation
New Logon:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon GUID:
{8e360e91-001b-c726-84a6-e7281a4bcac8}
Process Information:
Process ID:
0x0
Process Name:
Network Information:
Workstation Name:
Source Network Address:
x.x.x.x
Source Port:
60077
Detailed Authentication Information:
Logon Process:
Kerberos
Authentication Package:
Kerberos
Transited Services:
Package Name (NTLM only):
Key Length:
0
This event is generated when a logon session is created. It is generated on the computer that was accessed.
The subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The logon type field indicates the kind of logon that occurred. The most common types are 2 (interactive) and 3 (network).
The New Logon fields indicate the account for whom the new logon was created, i.e. the account that was logged on.
The network fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The impersonation level field indicates the extent to which a process in the logon session can impersonate.
The authentication information fields provide detailed information about this specific logon request.
- Logon GUID is a unique identifier that can be used to correlate this event with a KDC event.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
5140:
A network share object was accessed.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Network Information:
Object Type:
File
Source Address:
x.x.x.x
Source Port:
60077
Share Information:
Share Name:
\\*\Captures
Share Path:
\??\D:\Captures
Access Request Information:
Access Mask:
0x1
Accesses:
ReadData (or ListDirectory)
4634:
An account was logged off.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon Type: 3
This event is generated when a logon session is destroyed. It may be positively correlated with a logon event using the Logon ID value. Logon IDs are only unique between reboots on the same computer.
Anyone an idea why this is happening?

Hi,
We can refer to the following blog for MDT troubleshooting:
http://blogs.technet.com/b/askcore/archive/2012/05/08/mdt-2010-amp-2012-my-deployment-failed-what-and-where-are-logs-i-should-review.aspx
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

"The specified server cannot perform the requested operation" when rpc from server 2003 to Windows 7

I am having problems where all my Windows 2003 servers cannot rpc to 2 of my Windows 7 workstations, error message is "The specified server cannot perform the requested operation".
All the machines are in workgroup environment.
Windows 7 workstations: desk1, desk2, desk3, desk4, desk5, desk6
Windows 2003 servers: server1, server2, server3, server4, server5
Windows 2008 server: server6
From any Windows 7 workstation I can rpc to any other machines,
\\desk1\d$, no problem
From any Windows 2003 server I can rpc to all the machines exception desk4 and desk5, they give the "The specified server cannot perform the requested operation". However, desk4 and desk5 can rpc to any other machines (including the Windows 2003
servers), no problem
From Windows 2008 rpc to desk4 and desk5 also no problem.
I also have no problem rpc between any of the Windows 2003 servers,
\\server2\d$ from server3, no problem.
I turned off the firewall at desk5 and desk4, just to try, but didn't help, same problem. This show firewall is not the cause of the problem.
Desk4 and Desk5 used to run Windows 2012 for 1 year and recently I downgraded them Windows 7 Professional x64. When they were running as Windows 2012, those Windows 2003 servers have no problem rpc to desk5 and desk4.
The issue is thus lying between desk4 and desk5 with Windows 2003 only\
Any suggestions?
Valuable skills are not learned, learned skills aren't valuable.

Hi,
I found a related thread and a hotfix for similar issue:
Problems Accessing Administrative Shares Remotely - Windows cannot access \\Servername\ShareName
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9807a799-bea3-46ad-92a5-732779135f98/problems-accessing-administrative-shares-remotely-windows-cannot-access-servernamesharename?forum=winserver8gen
You cannot access an administrative share on a computer after you set the SrvsvcDefaultShareInfo registry entry to configure the default share permissions for a network share
https://support.microsoft.com/kb/971277/en-us
Also please check if it is caused by security program such as antivirus program.
If you have any feedback on our support, please send to [email protected]

An error was encountered performing the requested operation:

I frequently get this error while I initially open a connection and click on a table:
An error was encountered performing the requested operation:
Stream has already been closed
Vendor code 17027
I cannot see the columns information and have to refresh. After this error, if I switch to Data tab from the default Columns tab, I usually get another error that says:
Connection is currently busy. Try again?
[Try Again] [Abort]
I never had these errors using Toad for Oracle tool.
My environment:
Windows 7 64-bit with 16G RAM
Oracle Database 11g R2
Edited by: 恩承四季 on Jan 28, 2013 1:27 AM
Edited by: 恩承四季 on Jan 28, 2013 1:27 AM

Hi,
Vendor code 17027Searching the forum for that issue only yields hits for prior SQL Developer releases. Be aware that the release shipped with DB 11g is rather out-of-date so, if you haven't already downloaded and installed the latest release (3.2.20.09.87), I would recommend upgrading. Easiest is to select the 32-bit version with JDK included.
Regards,
Gary

Deduplication: There is insufficient disk space to perform the requested operation

Similar Messages

Maybe you are looking for