Deemed Exports and Exports LoUT to follow same Number Range

Hi CIN Gurus,
Client requirement is :
Domestic Excise Invoice- No Range 8500- 9999
Deemed Exports Excise Invoice No Range: 201-999
Exports under LoUT Excise Invoice No Range: 201-999
Deemed One Invoice raised it should take 201 and the next invoice raised in Exports under LoUT then it should take 202 . Common number range for Deemed exports and Exports under LoUT.
For the above to get I maintained
J_1IEXCLOC: Domestic Invoice no range : 8500 -9999 for Excise Group 21 and Series Group 10.
J_1IEXCEXP: Deemed Exports no Range: 201-999 for Excise Group 21 and Series Group 30.
J_1IEXCEXP: Exportsunder LoUT No Range: 201-999 for Excise Group 21 and Series Group 20.
I created and Excise invoice for Exports under LoUT, it saved with 201. Up to this its fine.
Next Excise Invoice I raised for Deemed Exports, it has to take 202 and save, but instead it is asking for
J_1IEXCLOC Number range to be maintained.
How to maintain same number range for Deemed Exports Excise Invoice and Exports under LoUT.
Thanks&Regards
SRI

Hi CIN Gurus,
We have asked the client to write to Excise Dept for using Local Number range for Deemed Exports.
So closing the thread. and if any suggestions welcome.
Thanks for all.
Best Regards
Sri
Edited by: Sri on Nov 18, 2008 12:58 PM

Similar Messages

Same number range in Different system

Hi Gurus,
I am working on a scenario where the HR system is in 4.7 and all the other modules are in ECC 6.0. I need to move HR masterdata from 4.7 to 6.0. I am moving the same through standard ALE/idocs.
The problem is there is already some existing HR data belonging to a different company code in ECC 6.0 and the objects have the same number range and as such if I trigger idocs from 4.7 they will replace existing data in ECC 6.0 which I cannot afford to happen.
I can change the number range in 6.0 in future but right now what do i do with the existing Org units, postions, Jobs which are clashing?
TIA
Adithya

Actually I need both phones (phone on the CCM & phone on the SIP Trunk) ring at the same time without user interaction. It works fine if you have two phones on the same CSS and partition (for example, Line 1), but how to make the number to ring when phones are in different partitions?

SAME NUMBER RANGES FOR DOMESTIC AND EXPORT INVOICE

Dear All,
We have maintained Two objects separately for Exports and Domastic sales invoices which is inturn giving two different number ranges.
But our client needs same number to be continued for both.
For eg: 000001 . 000002 and 000003 is the number range for domastic invoices for Export invoice 00004 should come. now as we have maintained different objects Export invoice is starting from 00001.
Our client does'nt want to maintain separate number ranges for Exports and Domastic, same number range should be there for both which should follow continues numbers.
Please suggest me on this at the earliest.
Regards,
Jay

Dear Jay
Assuming that you are asking about Excise Invoice number ranges, please do maintain Numbers for the Object: J_1IEXCLOC
When you go into J1IIN, you will need to mark the checkbox: Use Local Number. If at the first time (in the case of Deemed and Regular Exports), you do not see this checkbox, click on the 'Calculator' icon and hit the 'Back' icon. Mark the checkbox and save your Excise Invoice. This number will be a continuation of your Domestic Excise Invoice.
thanks
G. Lakshmipathi

Excise invoice and domestic invoice sharing same number range

Hi,gurus,my question is addresed to the sap cin gurus
Scenario:-- Normally sap has provided provisions that the domestic invoice and the excise for the export will have different number range object
Transaction-snum or snro(As per the rule the no range has to be approved by excise authorities)
Requirement:--The present requirement of the client is that as per their requirement they will be using the same excise number range both for domestic and the export(They have got the approval from the excise department as per the amendment,that specifies the same)
so i request you to pls guide me as how can it be done in sap that two different business process will share the same number range.
as per my knowledge local excise number range is-J_1IEXCLOC
and for exports is-J_1IEXCEXPand the both will use the same number range and,suppose 1 local invoice is created and say if the no is 1,then if the export excise invoice is created the number will be 2,pls guide me how is it possible that the same number range should be used.
Thanks in advance---Anshuman chakraborty

Dear sir,Thanks for attention towards the issue,but still i need to clarify some details-
the number range forJ_1IEXCLOC are already configured .It is not the case like i have to configure it for the first time however ,so the issue remains how shall i proceed in this case
Sir,i have already checked the transaction j1iin,it does not give any such box to check the-use local no range
infact the error message which the system was throwing to the user that-number range object not assigned for Object: J_1IEXCEXP.
The question remains from my side is what are the complete configuration steps I need to do ,to make the check box appear so as to select-use local number range,and is there any thing to be conveyed to my developer,so that the same appears,
or is it the case like the anything should earlier have been done before the number range for J_1IEXCLOC was created.i would request u to pls guide me giving the complete details of the step to be followed.
Thanks in advance
Anshuman chakraborty

I used my apple ID for my daughters new iPod and now we have the same number! Please help

I just started up my daughters new iPod and use my apple id and now we have the same number! How do I change this on my daughters iPod? I want her to be able to use my apple ID but I'd like her to have her own number... Is this possible?

Create a new ID for her:
On the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into hers. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into hers. Make sure that under You can be reached at only her ID email address is listed
- Settings>iCloud and sign out and sign in with hers
Continue to use the common ID for Settings>iTunes and App stores.

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

Same number range for commercial invoice.

Hi.
Can we maintain same number range as last year for commercial invoice for new fiscal year?
if last year Invoice no is 60000001
new fiscal year again 1st no is 60000001
then what will happen to earlier number?
Reg.
Amol

The invoice gets stored in table VBRK
if you reset the number range, then SAP would try to post e.g. invoice 60000001 but as there is already a record in VBRK table the program will dump and not create the invoice. This will happen ongoing until a number is reached that is not in the database.

Create Equipment with same Number rang at Diff Equipment Catagory

Hallo Guys,
client bymistake created some equipments which are actually PRT with catagory M ( Machine)
now they made deletion indicator to that and inactive the part and now want to create same machine as a PRT with same number range interval
as that of made at machine, but as per std system is not allowing to create duplicate records.
How to achive this ?
Regards,
Rip

If no Equipments were created after the Deleted Equipments then you may have an option.
Tcode OIEN
Go to Number range interval, Then the Current number can be changed as under. Reduce this Current number by those many equipments. Then new equipments will have the same numbers of the deleted equipments
You should do it in trial servers and if suits to you then you can decide to go ahead. You should be prepared to have filters in Selection-screes to avoid the DLFL INAC equipments appear in the reports
Jogeswara Rao K

Same Number range

Hello everyone,
If we are using same number ranges for contracts and standard PO's, is there any way we can distinguish between them by not going into their individual T codes? This will help me save some time.

Hi,
I am not sure why business use and permitted to use same number range for purchase order and contract?
To differentiate between & contract, you can use Purchasing Document Category where you have purchasing document category F for purchase order & purchasing document category K for contract.
For easy report you can use transaction code ME2N for purchase order and ME3N for contract
Regards,
Biju K

Can we use same number range for different fields

can we use same number range for different fields. how can we see the number range defined for a particular field

Hai,
Yes you can have same number range for different fields by using the same domain to the data elements that are user to your two fields.
To see the range:
Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
<b>Reward points if it helps you.</b>
Regds,
Rama.Pammi

Same Number Range for OTHR and DLFC

Hi All,
I want to know whether we can mantain different number range for OTHR and DLFC transaction Type for same Series Group.
i.e for Returns Vendor Delivery Excise Invoice(MM side-OTHR) and Outgoing Excise Invoice(Sales Side-DLFC).
Pls guide me..
With Regards
Azeez.Mohd

even when you sell SFG / Trading goods -( HAWA / HALB) , then also you have to update RG1, though they are not FG materials.
Material type in terms of excise, but not in terms of SAP.
eg:
When customer returns the goods, you can process it in 2 ways-
either by creatign Excise JV - J1IH
or by following MM route, nothing but by creating Incoming excise Invoice wrt:inbound delivery-LR in Tcode:J1IEX-
where in excise tab, material type will be defaulted as "F-RG1", but it has to be changed to "Raw Material".
similarly, Vendor returns also treat as the same,
for your info, adjustment of excise duty for vendor returns will be routed through excise JV in J1IS & mov type:122 -ret to vendor is activated for RG1.

Iphoto and Itunes not showing the same number of photos in albums

why does the number of photos in an iphoto album is not the same when synching my iphone. For example, in iphoto, my "family" album has 2700 photos, but in Itunes it only shows 2675. I have included the videos also. Thanks

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

Number ranges for SD and FI documents(Invoices, credit and debit notes )

Hi all,
I have a requirement that that the document numbers used on sales documents issued to customers be within the same number range.that means SD and FI documents (Invoices, credit and debit notes to customers) should be in the same number range.
Can anybody tell me userexit for this or related solution or how should I approach to it.
Regards,
Azra.

>
Azra Husain wrote:
> SD and FI documents (Invoices, credit and debit notes to customers) should be in the same number range.
>
> Can anybody tell me userexit for this or related solution or how should I approach to it.
> Regards,
> Azra.
What do you mean by same number range?
As for as i know number ranges are application specific so you cannot have both SD and FI documents in a same number range.
What you can do with userexits is to assign a number range based on a condition. For example Plant based Billing number range, even you cannot have same number range for Sales order and billing.
Regards
Karthik D

Excise invoice number range wants to be same for domestic & export & Deemed

Hi Gurus,
My Client wants one excise number range for all sales transactions,
including domestic & export & deemed export,
I tried to manitain only one number ranges in Local number range object only to utilise
that check box of local number range in excise invoice screen,
but still it is not allowing us to do so ,
I tried to maintain number range for export serious group in local number range object only but still it is not allowing me to do further proceed for ARE-1 with refernce of that excise invoice number ,
please give me solution for this issue ,
we are in very bad situation our Go-Live is stuck due to this issue from 1 week,
Regards,
Sai

Do not maintain Numbers for the Object: J_1IEXCEXP; only maintain for J_1IEXCLOC
When you go into J1IIN, you will need to mark the checkbox: Use Local Number. If at the first time (in the case of Deemed and Regular Exports), you do not see this checkbox, click on the 'Calculator' icon and hit the 'Back' icon. Mark the checkbox and save your Excise Invoice. This number will be a continuation of your Domestic Excise Invoice.
thanks
G. Lakshmipathi

Are-1 for deemed exports.

Hi all,
AS per the client's requirement , they create ARE-1 for deemed exports in the following two instances...
1). With reference to their Bond they create ARE-1 , but this should be tracked as deemed exports.
2). With reference to CT-1 form number of the merchandise exporter they create ARE-1, this should be treated as deemed export.
Is there any way to create ARE-1 for deemed exports.. Am getting series group problem while generating ARE-1 , as deemed exports follow domestic series group. While generating ARE-1 both export and deemed exports should have the same series for number range...Please advise..

Hi
Deemed export can only be created against CT1 and CT2 licence types. That is ARE3 form.
and not ARE1
Regards
MBS

Deemed Exports and Exports LoUT to follow same Number Range

Similar Messages

Maybe you are looking for