Deemed exports not getting created when excise invoice generated in backgro
Hi guys,
when i create an excise invoice in background .and try to create ARE-3 in J1IA301.I am getting a error (081091004/2009 excise invoice is meant for normal invoice).
when i create excise invoice manually and click on goto - utilization . The excise invoice type will be local .If i click on the pencil tab it will change to EXPORT and we can see DEEMED in blue color after this i will save and create ARE-3. ARE-3 gets generated.
while creating excise invoice in background the EXCISE INVOICE TYPE in J1IIN will be LOCAL and we will not be able to change after this when i try to create ARE - 3 IAM GETTINGTHE ERROR..
Please help me out of this..
As my client wants to create the excise invoice in background while billing document is created..
Regards,
Shivdeep B
Hi,
If you want to create excsie invoice in back ground while creating billing document for Deemed exports.
Please follow the navigation as mentioned below.
SPRO - Logistic General - Tax on goods movement - India - Business transaction - Out going Excise invoice - Maintain default Excise group and series group.
Here please maintain you Plant, Excise group & Series group for deemed exports sales area combination and export type as Deemed exports in *details screen*. Now system will create excise invoice for deemed exports in background while creating the billing document go to display excise invoice and see the utilization you get Deemed exports.
This will do for you.
Similar Messages
-
Sub items are not getting copied into excise invoice
Hi Guru's
I am using Sales BOM in my sale order, pricing and inventory are controlled at sub-item level.
I am creating the outbound delivery with reference to sale order and billing document (Commercial Invoice) with reference to outbound delivery.
When I create an excise invoice in J1IIN, subitems are not getting copied from billing document, instead only main item is getting copied along with sum of all the excise duties of subitems. Ex: A is main item (Not relevant for pricing). B and C are subitems with excise duty 10 and 20 respectively. Here A is getting copied with excise duty 30 (10 +30).
When I download the excise register, register is showing all A, B and C items with quantity but it is not showing the corresponding excise duties of subitems. We would like to avail cenvat at sub items.
Kindly suggest me how can I copy subitems into excise invoice from billing document.
Thanks & Regards.
Swamy H PHi Lakshmipathi,
Thank you so much for the response.
Yes, I am able to save the outgoing excise invoice(J1IIN) without any errors. It's working fine for normal materials(With out BOM), but for BOM materials even though main item is not relevant for pricing as pricing is controlled at sub items all the excise duties (BED, ECS and S&H cess) of sub items are getting copied to main item while creating the outgoing excise invoice.
I mean excise invoice is showing only main item with all the sub items excise duties. same is getting posted also.
But when I extract and download RG1 register, RG1 report is showing both main item and sub items with quantity but excise duties are not shown.
I debugged and found that excise duties are not flowing to table J_1irg1 from J_1iexcdtl.
Thanks & Regards,
Swamy H P -
AUC Asset not getting created when Internal Order is created
Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
SanjaiHi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai -
Need help: Distribution demand is not getting created when Iu2019m using Purch
Friends,
When Iu2019m running the heurisitic plan distribution demand is not getting created. Iu2019m working on SCM 5.1
I have a transportation lane which are automatically created using the Purchase inforecords. Iu2019m not
facing any issues tranfering this purchase info records (PIR). Iu2019m able to see this as transportation lanes
in APO. When I run the heuristic plan run purchase requsition are getting created but distribution
demand is not getting created. I have tested the same scenario by manually creating transportation
lanes. The manually created transportation lanes are generating distribution demand but purchase info
record transportaton lanes are not generating the distribution demand. What may the cause? I would really appreciate for
your input in advance.
Regards
KRNFriend,
I have maintained the means of transport to the tranportation lane
Regards
KRN -
PPM not getting created when ECC Production version is changed
Hi,
We are facing a problem with PPMs.
We changed the Production version in ECC for the corresponding Material in ECC from 5000 to 6000.
We then ran the RSPPMCHG and then generated and activated the PPM Integration Model.
No queues inbound (APO) or Outbound (APO) were blocked. \
The result was that the 5000 PPM was deactivated in APO but we could not find the 6000 PPM version anywhere.
Can anyone please help??
Regards
Abhishek SahiHi,
Refer notes 448085 PPM Transfer: Tips and Tricks
Aslo after generating and Activating the IM, run the report RSPPMCHG ( Tcode - CFP3)
Thanks,
nandha
Edited by: S.Nandakumar on Oct 8, 2010 10:05 AM -
Silent Installation - Respond file not getting created !!!
Hi,
I am trying to create a respond file by running the installation as follows
./runInstaller -ignoreSysPrereqs -record -destinationFile /backup/ORA_DOWNLOADS/9201.rsp
ignoreSysPrereqs is used because we have Sun Solaris 5.10 which is not in oraparam.ini.
I am installing 9.2.0.1 Please do not ask why 9.2.0.1 now.
Now the problem is my respond file is not getting created when I run the install. Does the respond file gets created after the installation is complete? I do not want to end up doing installation at one server without the respond file.
Please help.
Thanks,
Ankit.Hm, you might be hitting a bug. Need to check my archive of historic Oracle events (means, I'll get back when I have looked through my notes in a few hours or more).
-
Excise invoice should not get created without PGI
Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T SaravananDear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi -
Invoice is not getting created in Order related billing
Dear all,
I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
Please suggest me if there are any configuration changes i need to do to overcome this problem.Apart from the suggestion already given, also ensure that
the order is not showing in incomplete log
the order is not blocked for credit limit
You can also cross check in VF04 whether system is fetching that sale order. For information, once you execute VF04, by default, system will check only "Delivery related" check box. You have to manually select "Order related" check box.
G. Lakshmipathi -
System should check chepter id when i am creating the excise invoice.
dear sir.
when i am creating the excise invoice in J1IIN , system should check chapter ID is maintained are not for the material in J1ID.
if chapter id is not maintained in J1ID for the material, system should give error or warning message when i am creating the excise invoice in J1IIN.
Please help me out this issue.
regards
jrpIn fact, when you are creating billing document, system will give a warning message that chapter id is not maintained for that material and the duty values will be zero in billing document.
As I dont have access to SAP, not sure on the warning message number. Try for a material without maintaining the chapter id in J1ID, note down the warning message number and convert it into an error message if possible.
Alternatively, you can try with the user exit J_1I7_USEREXIT_EXCISE_BEF_SAVE to meet your requirement.
thanks
G. Lakshmipathi -
I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice. The hard drive is set set not to go to sleep.
Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379 -
Error in creating Depot excise invoice.(J1IJ) 4F:550
Hi Gurus.
I have created.
Depot Sales Order->Depot Delivery.
Now i am creating Depot excise invoice in J1IJ.i am getting error when i enter delivery no, excide group & Series group
error:-
4F:550 TDL TD12 E3 E3
TDL-company code
TD12- Plant(Depot)
E3-Excise group
E3-series group.
NOTE:- we dont want to configure default excise group & series group config.
Reg.
Amol
Edited by: Amol Tamhane on Mar 16, 2010 3:17 PMHi all,
I got the Solution.
Tell your ABAPER to find out Object in "SAPMJ1IJ" PROGRAM
source code of MJ1IJF01.
in my case the object was "J_1IDEP_S1"
1) check whether that object is assigned to user or not(from Basis guy)
2)Check whether values of following are assigned in that object or not(Basis guy)
Activity
Company Code
Plant
Excise group
Excise document series group
take the help of Basis guy to Resolve it.
Reg,
Amol -
Excise values are not copying in my excise invoice
Hi experts,
When am doing factory sales with tranasaction code j1iin from billing The excise duty is not copying into my excise invoice. What could be the reason what needs to be done to run this scenario perfectly.
excise invocie is generarting with out value. Iam working ecc 6.0 version and taxinn procedure.
Thanks & regards
Rack29
TGo through these threads
[BED NOT FLOWING TO EXCISE INVOICE J1IIN |BED NOT FLOWING TO EXCISE INVOICE J1IIN]
[eXCISE INVOICE |eXCISE INVOICE]
[Excise Values Not Flowing in J1IIN-(export Excise Invoice) |Excise Values Not Flowing in J1IIN-(export Excise Invoice)]
[excise values in exports |excise values in exports]
Though your issue relates to domestic, the above links is applicable to your issue also.
thanks
G. Lakshmipathi -
File not getting created in a different server
My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
VishTry to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
RFC_DESTINATION =
* FILE_MASK = ' '
* LOCAL_DIRECTORY = ' '
* REMOTE_DIRECTORY = ' '
* OVERWRITE_MODE = ' '
* TEXT_MODE = ' '
* TRANSMISSION_MONITOR = 'X'
* RECORDS_PER_TRANSFER = 10
* MONITOR_TITLE =
* MONITOR_TEXT1 =
* MONITOR_TEXT2 =
* PROGRESS_TEXT =
* IMPORTING
* LOCAL_DIRECTORY =
* REMOTE_DIRECTORY =
* LOCAL_SYSTEM_INFO =
* REMOTE_SYSTEM_INFO =
* TABLES
* FILE_LIST =
* EXCEPTIONS
* CONNECTION_FAILED = 1
* INVALID_VERSION = 2
* INVALID_ARGUMENTS = 3
* GET_DIR_LIST_FAILED = 4
* FILE_TRANSFER_FAILED = 5
* STOPPED_BY_USER = 6
* OTHERS = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF. -
Spool not getting created in batch job
Hello experts,
We have a requirement of printing BA00, BA01 and LD00 from different application.
We have done same code for all BA00, BA01, and LD00.
Normally the code is working fine except in few cases, when batch job is created but spool is not created.
DATA: job_name TYPE tbtcjob-jobname,
number TYPE tbtcjob-jobcount,
print_parameters TYPE pri_params,
wv_pripar TYPE pri_params,
wv_arcpar TYPE arc_params,
wv_val TYPE c VALUE 'X',
wv_false TYPE c VALUE 'X',
gv_mandt TYPE tsp01-rqclient,
gv_user TYPE tsp01-rqowner.
CLEAR: gv_mandt, gv_user, number.
gv_mandt = sy-mandt.
gv_user = sy-uname.
job_name = 'DELIVERY_PRINTING'.
CLEAR: range1.
range1-sign = 'I'.
range1-option = 'EQ'.
range1-low = 'LD00'.
CLEAR: range1-high.
APPEND range1 TO range.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = job_name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT sd70av2a WITH rg_kschl IN range
WITH rg_vbeln IN deli_tab
TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB job_name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = job_name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
WAIT UP TO 10 SECONDS.
** to give the data to the printer***
* CLEAR gv_rqident.
SELECT SINGLE listident INTO gv_listident FROM tbtcp
WHERE jobname = job_name
AND jobcount = number.
IF sy-subrc = 0.
MOVE gv_listident to gv_rqident.
CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
EXPORTING
spool_request_id = gv_rqident.
ENDIF.
The same code is for all the output BA00, BA01 and LD00.
The issue is that for few batch jobs (which is created in the above code) , spool is not getting created.
Thanks and Regards,
Paritosh PandeyHi,
The code starting from WAIT UP TO 10 SECONDS. - not only does it look attrocious, is error prone (if no free process for executing batch job is available for 10 seconds, or if the job runs for more than 10 seconds, what will happen...?), but seems utterly unnecessary... Is there any reason immediate spool output can not be handled by simply setting PRINT_PARAMETERS-PRIMM = 'X'?
cheers,
Janis
Edit in:
Ok, i just read Document in spool but not printed... Do not use an output device relying on frontend access methods to do printing from background processing. Frontend is not available during background processing, period. To my knowledge there is no easy, clean solution to this problem other than defining and assigning, per user, output devices not relying on frontend printing. What if the dialog user has logged off by the time batch job finishes..? May the spool remain unprinted?
Has the SAP Basis refused to define output devices (I have hard time believing this...)? Well, tell them one time to stop being silly and if they do not cooperate, tell the owner of the requirement that it can not be implemented due to uncooperative Basis then... and that the users will have to keep going to SP01 and manualy start the output!
Message was edited by: Jānis B -
Infotype not getting created using FM HR_INFOTYPE_OPERATION
I am trying to create infotype 210 from user exit ZXPADU02 using below code.
DATA : v_return TYPE bapireturn1,
v_return1 TYPE bapireturn1,
v_return2 TYPE bapireturn1,
v_key TYPE bapipakey,
v_return3 TYPE bapireturn1.
p0207 = gt_p0207.
MOVE-CORRESPONDING p0207 TO p0210.
p0210-infty = '0210'.
p0210-begda = p0207-begda.
p0210-taurt = 'PR'.
p0210-txsta = '01'.
p0210-amtex = '0'.
CLEAR : p0210-aedtm.
CLEAR : p0210-uname.
CLEAR: v_return,v_return1,v_key.
CALL FUNCTION 'BAPI_EMPLOYEET_ENQUEUE'
EXPORTING
number = p0210-pernr
validitybegin = p0210-begda
IMPORTING
return = v_return.
IF v_return IS INITIAL.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '0210'
number = P0210-PERNR
subtype = 'PR'
objectid = p0210-objps
lockindicator = p0210-sprps
validityend = P0210-ENDDA
validitybegin = P0210-BEGDA
recordnumber = p0210-seqnr
record = P0210
operation = 'INS'
IMPORTING
return = v_return1.
ENDIF.
CALL FUNCTION 'BAPI_EMPLOYEET_DEQUEUE'
EXPORTING
number = p0210-pernr
validitybegin = p0210-begda
IMPORTING
return = v_return.
But infotype 210 is not getting created.
When i check it from PA30, i get error
"No data stored for Residence Tax Area in the selected period"
Can anyone tell me what is the problem here.
Full points will be rewarded.HI,
check the value coming on the screens are properly.Use DIALOG_MODE as foreground and check whether all fields getting populated.
Check any default values need to be populated.
Regards,
Manoj.
Maybe you are looking for
-
Creating a .GIF from portion of .AVI?
I thought that this would be easy because of the plethora of .GIFs floating around on the internet. But I can't figure this out for the life of me, and now I'm having problems with MPEG Streamclip to make matters worse... I have a clip from an episo
-
Referencing a variable in 'session findbyId' command (SAP GUI Scripting)
Hi all - I was wondering if anybody knew a way to get the following to work: I would like the script to type in a value in the components grid in SAP but I want ot put it in a loop so I can bump up the line number with each read. For it to work I wou
-
My ipad is stuck on the boot logo with loading bar
okay this is my first time using apple community so I'm sorry if my review doesn't provide enough info. i own a iPad 2 running IOS 8.1.2, last i checked i hat about 2 gigabytes left okay so here is what happened i was reseting my iPad and suddenly it
-
1Z0-204, 1Z0-215 study packs required!
Hi Guys, does anybody have any study material for the following exams.... i cannot find any... Balwinder
-
TREO 700 NOT BEING ABLE TO SYNC ... EVEN WITH MISSING SYNC
Nothing. It does nothing. I press the former "hot sync" button and it plays a funny sound. Then, nothing. There is no reacting, nothing seem to happens. Help please!