Deep problem friends need help

hello friends,
i have a problem i am trying to connect a WAP54G access point to a 54G Router (ADSL) without connecting a lan cable to WAP54G Accesspoint how can i use the same as a RANGE EXPANDER ?? CAN i or CANT I ?? if possible could any one please tell me how to do it I am in a situation here. Thanks .

Yes you can set your WAP54G with your Router in a Repeater mode. Click Here and you will be able to configure your WAP54G in repeater mode.

Similar Messages

After updating my iPhone 5 to ios 6.1 I'm getting a hissing sound during calls. Any one else having this problem? Need help

After updating my iPhone 5 to ios 6.1 I'm getting a hissing sound during calls. Any one else having this problem? Need help

I am having the same issue. I am updating to 6.1.3 to see if that helps. It is really annoying. It seems to vibrate as well as hiss on my ear piece speaker while on a call. I keep looking at the phone thinking maybe another call is coming in.

My friend needs help with her ipod

My friend needs help with her Ipod. Here's what happened. She connected her Ipod to a casette adapter and the ipod just froze. She started doing the reset but to no avail. What do you think cause this? She really needs help so if anyone can suggest what to do that would be greatly appreciated.
I don't specifically know her ipod but I think that it is the Ipod 30gb.

Welcome to Apple Discussions!
She needs to reset her iPod by holding down Menu and Select for 6-10 seconds...
Resetting iPod
It may take several attempts. The above link also has "tips" if the iPod does not seem to be resetting.
If she has tried many times, along with the "tips" and the iPod still won't reset, then she will have to wait for the iPod's battery to die and then she can charge it back up and it should work fine. The iPod should reset though.
btabz

MSI K7N2G-ILSR Problem! Need help!

Hi,i bought a K7N2G-ILSR last year when i was in Germany. This mainboard never worked as well... I wanted to work with Athlon XP 2500+ and Dual Channel 256MB+256MB=512MB 400 Mhz DDR-Ram. It hasn't worked when i first wanted to use and i changed the jumper to the securit mode than it worked but it has never opened with one button pushing.I was always trying to get screen vision with 3-5 closing and opening.One day i tried to get the jumper back and i tried to open but it never worked. I got the jumper securit again but again never worked. I tried everything but it never worked after that event. Normally i had to inform it at first and give it back or give it to the repairing but i couldn't have time. Now i have to do it this time. Now i want to change this or something else but in Turkey. I am living in Turkey and does MSI Support Centre change it or repair it? What can i do to get rid of this problem. Need help!
Thanks for your helps from now!

MSI K7N2G-ILSR Mainboard 11X166
AMD Athlon XP 2500+
2X256 MB PC 3200 Twinmos
OnBoard Graphic Card
Samsung 40 GB 5400rpm HDD
300 Watt Power Supply
I dont have more infos but i can find out if you want...

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

I just did a reset all settings on both.
Will see where this gets me.
Thank you for your helpfull input.

Friends need help desperate-- Second page not printing from the beginning

Hi Friends,
I have a large layout whose main-section is 8.5x20 (Width&height) which has 2 frames each having 2 repeating frames and about 20 fields in each repeating frame. When I run the report it shows the report right, but when I print, it prints only the first half since the report is long. When I change the property of the second frame of 'Page break before' to 'yes' it prints the second frame on the second page but print it at the same position as it printed on the first, and top of second page is all blank. How do I make to print from the beginning of the second page. Need your help.
Thanks
Joe.

Hello,
Most of the times, these problem are solved by "enclosing" the "Repeating frames" in frames with "Vertical Eleasticity" set to "Variable"
Regards

Set inside a Set and powerset problem. Need help.

I've done other posts about this but I figured I'd start a new thread since I changed it so much. I understand the idea of power sets but not how it needs to be a Set inside a set and also how to get this thing to run. If anyone could show me a power set generator or help me fix my code I'd really appreciate it.
Thanks in advance
public static <E> Set<Set <E>> generatePowerSet(Set<E> S){
          Set<E> newSet = new HashSet<E>();
          Set<E> temp = new HashSet<E>();
          if (S.isEmpty() || S.equals("")) {
               Set<E> emptySet = new HashSet<E>(S);
               return (Set<Set<E>>) emptySet;
          else {
               Iterator<E> iter = S.iterator();
               temp = S;
               while (iter.hasNext()) {
                    E obj = iter.next();
                    temp.remove(obj);
                    Set<E> P = new HashSet<E>(temp);
                    P.addAll(temp);
                    newSet.addAll(P);
                    return newSet;
          }

I have no idea what a "power set" is.
But, this line:
if (S.isEmpty() || S.equals("")) {should just be:
if (S.isEmpty()) {S is the input parameter, and is a Set. Therefore, S can never equal an empty string.
Did you see my reply to your previous thread?
http://forum.java.sun.com/thread.jspa?threadID=677353
It seems that you didn't, because you didn't respond to it, and because your current code has the same problem.

WRT54G Wireless Router Problem. Need Help!

I'll start with the basics of my situation and if more details are needed, I will provide to the best of my ability.
I have a comcast cable internet connection. I have 6 computers in my house. Two of them are downstairs (which is where our modem is.) The other four computers are upstairs. All of these computers are Desktop computers with the exception of one laptop.
My laptop (which is Windows XP) can pick up a random wireless signal from the room it is in. I also found out a way to share the internet connection on the computer by going into the properties of my network connection and enabling internet sharing on it. This means if I connect a network cable from my laptop to another computer, I can leech the connection from my laptop and have internet access on the other computer. I also had a switch that I used to connect the other 3 computers upstairs by means of the laptop. The problem was, the laptop was using someone else's wireless connection in the area, and it wasn't strong enough to keep up a constant connection.
I decided, if I can leech someone else's wireless connection, why not have my own. So i recently bought WRT54G Wireless Router and set it up on one of the computers downstairs (because that's where the modem is). It works fine as far as connecting my laptop to the internet from upstairs. My laptop can access the internet through the connection I set up in the LELA program.
Here is the part I am confused about. Everything is plugged in correctly as far as the router is concerned because the laptop can access the internet. But when I connect an ethernet cable directly to one of my other computers (which are Windows Vista, but I didn' t have a problem with it previously when I was leeching someone else's connection), the connection drops on my laptop, and the other computer still can't access the internet. A notice pops up that says its trying to identify the network, but it gives an error that says there is something wrong with the DNS. As soon as I disconnect the ethernet cable connecting my laptop to one of the other computers, the connection is fine again on the laptop. It's only when I connect the computers together that the connection drops.
I just don't understand why it wouldn't work when I created my own network if it worked with another network with no problem. My whole point in getting a wireless router was to have a router within good range to keep up a constant connection on my other computers that aren't in range of the modem downstairs. I just don't know where else to look. I'm not sure if it can be fixed on LELA, manually through my wireless settings, or if it could be a problem with one of my computers' settings. I've tried many different things and I'm not sure what else to do so any help is most definately appreciated. I feel like I've tried everything. I know it's possible because I've one it before, I just need the help because I'm not much of a networking person and I don't know what I should start with to make this work.
Thank you to anyone who can help or even point me in the right direction.

Access router setup page ...Click on the Wireless tab on the Setup page- Here Wireless Network mode should be mixed- Provide any non-linksys name .... Set wireless channel to 11- And wireless SSID broadcast should be Enabled and then click on "Save Settings" >>Now Click on the Sub tab under wireless > "Wireless Security" Change the Wireless security mode to WEP/WPA ...type in the key & click save settings .... >>>>Click on Advanced Wireless settings>>Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" Check the connection once again & see if it works or not ...

T500 overheating problems - Novice needs help

Like for some others in this forum, my Thinkpad T500 is overheating.
Here are my specs:
Model: T500 (Type: 2055)
Processor: P8600 (2.40GHz)
GPU: ATI Mobility Radeon HD 3650
When I'm doing most regular activities (browsing,emailing, documents), laptop is fine. The unit gets warm underneath, but I've not had problems.
If I'm doing more intensive activities (watching local video,Netflix, or Skyping), laptop starts to heat up enough so that it's uncomfortable on my lap.
When I play games (Nothing crazy intensive: e.g. Minecraft, Civilization 4), and sometimes when I Skype, the unit gets extremely hot underneath and shuts off without warning.
The heat seems to be originating from the left-hand side of the laptop, near the back. Unless I'm mistaken, this is where the GPU is located. And this makes sense, since the overheating seems to be related to graphics-intensive activities.
So, my questions are:
1. How can I diagnose this problem further? What's a good utility to use to monitor heat of GPU and CPU? Anything else I can use ?
2. Are there any settings I can change on my laptop to prevent the automatic shut-downs and excessive heat?
3. I've seen some mention of people cleaning fans, replacing fans / cooling units, or adding thermal paste. Need some advice there too.
Any suggestions are welcome.
Thank you!

Good day and welcome to the community.
If you've never had the machine open to blow out dust from around the fan/heatsink assembly, I'd recommend that first. If you download a copy of your Hardware Manual: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/43y6630_04.pdf , you'll see that by pulling the palmrest, keyboard and keyboard bezel (manual pages 88-90, 92-93 and 102-103, respectively), that you'll expose the top side of the assembly in the upper left. The top view image on page 107 is helpful. The CPU is beneath the end section of the wider heatpipe and the GPU is beneath the narrower.
While holding the blades of the fan stationary (important!), you can use canned air to blow all of the dust from the inside out through the exhaust vents. Once done, button everything up and see if things run cooler. If you're still overheating, you may need to clean off the old thermal compound and apply new, but try the de-dusting first.
Regarding temp monitoring, many folks like TPFanControl: http://www.staff.uni-marburg.de/~schmitzr/donate.html
Scroll about 2/3 down the page for the download link for v0.62 which is the latest. It can be run in monitor-only mode or can be configured to provide a level of control over your fan speed.
Please post back your results from the first step and we can go from there.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Ipod photo - serious music transfer probleme. i need help please

hi there.
i have a problem that i cant resolve.
i search and ask on french forum, but nobody could help me.
actually, my ipod didnt want me to upload files over 6 minutes.
an error message box used to pop up on itunes each time the delay of about 6 minutes music transfering exceed.
here is the msg box:
http://fr.audiofanzine.com/img/membres/normal/6/9/69236.png
he told me that itunes couldnt read/write onm my ipod.
that's false cause he could upload <6 minutes music transfering time.
anyway i reeset my ipod, update it with ipod updater.
and the problem is still the same.
i still get this message.
i tried with many kind of music, coming from diferent HD, but nothing to do.
i tried to find a help from apple, but this stupid website is made for you not to find a way to contact them.
if someone can help me, i would be glad...
my ears need sounds...

If you have already done so, have a look at this Knowledge Base article: "-36 or "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
If you have no success there I would try restoring your iPod, this will erase the hard drive, reload the software and put it back to default settings so make sure you have all your songs backed up in iTunes. A fresh installation of the software should sort things out: Restoring iPod to Factory Settings

Hi friends need help reg supporting tools

hi friends,
i need ur knowledge regarding supporting tools like
REMEDY,CITRIX.need some material regarding these tools.
pl forward to this mail id:[email protected]
thanks in advance
regards,
srikanth.

Hello Srikanth,
REMEDY : It is issue management tool used by the service provider to manage their tickets/issues. The documentation you can find from your project team, but mainly the process will be as follow for managing issues:
There are several stages from raising the ticket to close it.
1. Creation of Ticket : Inititally user will identify the query and raise the ticket in Issue management tool.
2. Acceptance of Ticket: Support team will response the user query saying that We acknowledge the query.
3. Assign to Consultant: Once Ticket is accpeted by support team, they will assign to respective team
4. Work in process: Consultant will put the status as Work in Process when he starts working on the issue,
5. User input required : if required more information from user, consultant will change status as user inputs required.
6. Work in process: Once user gives input, consultant will start working on that and put the status as WIP.
7. User testing: Once solution is provided and sent for user testing
8. User Accpetant: User will test and accept / reject the solution
9. Completed : everything goes fine consultant / user will change status as completed
10. Close: Support team / User will change the status as Close after completion of query.
CITRIX: Citrix is the secured VPN connection tool through which you can access your client's system. To access the system through citrix you need to have secure ID which will generate passwords for your ID for every 30 seconds.
You will get documentation from your project team.
Hope this will help.
Regards
Arif Mansuri
Reward if answer is helpful.

2 problems i need help with

1- My earphones no longer work so i want them replaced under the warrenty but to do that i have to enter credit card details etc...can i not just fill in a form and have them sent to me?
2- when asked to enter my seriel number for warrenty dates, it says i purchased the IPOD four months before i actually brought it. Thus my warrenty is only for 8 months!?!
According to this site it was purchased in dec but i know i didnt get it until a friend was staying in late march early april of the following year. I do still have the receipt somewhere.
Anyone help on either problem? direct me to the place i should ask if not
Many thanks

1- My earphones no longer work so i want them
replaced under the warrenty but to do that i have to
enter credit card details etc...can i not just fill
in a form and have them sent to me?
No, because Apple require you to return the faulty earphones once you receive your new ones. If you fail to return them, Apple then charge you their replacement cost on the credit card.
2- when asked to enter my seriel number for warrenty
dates, it says i purchased the IPOD four months
before i actually brought it. Thus my warrenty is
only for 8 months!?!
I would imagine Apple are the only people who could help you with this.

My friend needs help with iTunes

I'm on AIM with a friend right now, and he can't seem to get a specific music file into iTunes, no matter what he does. I already asked him if it's protected, but he said it's definitely not. I don't really know what else the problem could be, so I'm asking you guys. If you need any more info, just ask; I'm still talking to him, so...

What is the file type? Is an Mp3? OGG? WMA? m4a?

Email problems. Need help ASAP

I tried to send a email to my friend and an error occrued and ever since the same email pops up in my draft but I am not able to recieve my email in my inbox and it says it has timed out on port 993. How do I resolve this problem?

In mail, click window on the menu bar and connection doctor. If there is a connection that isn't working, there will be a red dot next to it. Click to the right of the dot and it should take you to where you need to fix an issue. Ensure that, for example, your ports are what your email service expects you to use.

Lenovo B560 Battery problem! Need help asap

Hi, I have a big problem with my Lenovo B560.
Recently I started noticing the charging icon in the bottom right corner of the screen would go briefly from "charging" to the icon for "not plugged" (just the battery). If I moved the power cord a bit it would go back to normal.
Days later it happened again but this time a little more persistent. I didn't give it much attention. And then suddenly, last weekend it stopped charging altogether, despite being plugged. I tried different power sources, I tried moving the cable around, nothing. With the little time I had left before it completely discharged, I googled the problem and saw somebody in a thread saying "it's likely tha battery, it needs replacement", which made sense to me, since my laptop is 3-years old.
I ordered a replacement battery and waited. Today it arrived and I put it in, eager to use my computer and have everything going back to normal. I turned on the computer, battery was at 50% but it still did not charge. It showed the battery icon like before, as if it weren't plugged in. I moved the cable around again and noticed it would briefly flash back to being plugged. And then it stabilized on "plugged in, not charging" but it was suddenly at 3%. However, at least it didn't go down this time.
I tried reinstalling the Power Management Driver, restarted, everything was the same. Then I went to Device Management, I disabled the Driver and the icon dissapeared. Restarted, reinstalled driver once more, icon was still gone.
Then I noticed in another thread somebody recommended taking out the battery and turning on the computer with just the power cord plugged in. So I took out the new battery and turned it on with just the power cord. And it worked, and that brings us to the present moment. Both batteries sit next to me and my computer is currently working simply on the power that is supplied by the power cord.
Can anyone please tell me how to get out of this mess? My job relies greatly on this computer working, and I need to fix it asap. Any kind of advice is welcome. Thank you!

Update: the computer will not turn on anymore, not even with just the AC cord and no battery. Please help.

Deep problem friends need help

Similar Messages

Maybe you are looking for