Defaul Camera Flash to Off, not Auto

Is there a way to do this? I know multi-tasking will, but if I close the camera app, I want to be able to open the app with the flash default to OFF.

I wish this feature too !
I'm using third part apps, and every time i took a pic the flash it's always set to AUTO so I have to lose time setting it to off then took the pic

Similar Messages

  • My camera flash goes off without me using the camera?

    While using my Galaxy S-4 once in awhile the camera flash goes off while reviewing my emails or during something other than using the camera Has anybody have the same problem over the past month?
    pb1945

    I haven't seen it reported on the S4, but several S3 users mentioned it after the latest update that phone received.  You might try going to Settings > Accessibility > Flash notification ... if the box is checked, uncheck it.  If it isn't checked, check it and then uncheck it.  I'd suggest then restarting the phone.

  • Camera flash goes off randomly in new Android update

    Very strange.  Anyone else having the same problem?/

    Yah, I'm sure it would. I found the answer a nano second later:
    http://www.urtech.ca/2013/12/solved-samsung-s3-android-4-3-camera-flashes-with-inbound-email-or-phone-calls/
    Galaxy S3, latest version on Android (this week)

  • Flash Player can not auto check update

    Why I Flash Player the 11.1.102.55 will not automatically check for updates?
    I installed did not change to setup. And also see in the console check the [Automatically check for updates] is auto.
    But now the Flash Player 11.2.202.233 I have not yet seen the update window appears?
    3 computers are like this!
    And in http://www.macromedia.com/support/documentation/tw/flashplayer/help/settings_manager05.htm l#118377
    Described in [Configuration Manager] figure and my different?
    Frequency can not be adjusted?
    OS: XP-SP3

    Good morning
    I am also having issues with Adobe Flash Player.
    The automatic update feature, will not work for me and I find myself having to manually re-install Adobe Flash Player everytime I log into my computer.
    In the Flash Player Settings Manager
    In the default settings, I ticked Allow Adobe To Install Updates (recommended)
    but because it never actually automatically updates
    I have changed my default settings to: Notify Me To Install Updates.
    And I am running the latest version of Adobe Flash Player 11.4.402.287.
    If someone could explain to me, what I'm doing wrong and why Adobe Flash Player won't automatically update for me, that would be great.
    sarahk_63

  • Adobe Camera Raw - JPEGS - Do Not Auto Refresh

    I use Adobe Camera Raw to edit my Jpegs. From my understanding, Jpeg editing in ACR is supposed to be DESTRUCTIVE - I do not see a sidecar XMP file created when I edit JPEGS.
    However, the edits I make to JPEGs in ACR do not show up on the actual JPEG file.
    As an example here are the steps I take.
    1) Right click on a JPEG and say "Open in Camera Raw"
    2) Desaturate the image so that it is totally black and white
    3) Click done - when I do this I notice that the image within the Adobe Bridge Browser is now in Black and White
    4) At this point, I want to verify that the actual image has been converted to Black and White. So I close down Adobe Bridge entirely. Then I navigate to the same directory using Windows Explorer (standard system file browser).
    5) My expectation is to see the same image with my ACR edits (i.e. Black and White). However, the image is still in color.
    I have placed 2 screenshots online at
    http://www.trick-photography.com/acr/Screenshot1.JPG
    (Adobe Bridge after ACR edits)
    and
    http://www.trick-photography.com/acr/Screenshot2.JPG (Windows Explorer)
    As you can see the image in Adobe Bridge is Black-and-White. However the actual image is not altered. I have tried to refresh thumbnails and images in both Adobe Bridge and Windows Explorer and that does not work.
    In order to see my edits, I have to open the image in ACR and save it to a new folder. This takes lots of time, and I do not think this is the right way because JPEG editing is supposed to be DESTRUCTIVE in ACR.

    Guess I have a different understanding. When you make an edit in ACR and click Done the original image is not modified, but the edits are retained. There is a round symbol placed in upper right corner that says the image has been modified, but the thumbnail displays the original image. If you open the image the modified version will display in ACR, and you can choose to open as is or modify further. So far this edit has been non-destructive.
    However, when you make an edit in ACR and click Save Image the original image is modified and saved with new name and location of your choice. The thumbnail displays the modified image. This has been a destructive edit. I think this is the step you are looking for.

  • E55 camera flash goes off too early

    Just discovered this so I imagine it's developed a fault, but I thought I'd ask if anyone else has the same problem. When I take a picture with flash, the flash fires before the camera shutter opens so the picture comes out dark. Any suggestions, please, or shall I just carry another camera?

    Hi mindmagic,
    Sorry to hear about the issue. Please make a backup with Nokia Suite. Then reinstall the phone software. The process is the same as when updating with Nokia Suite, but at the end select "Reinstall". 
    You can also type in *#7780# followed by lock code (default is 12345). This is soft reset, no data lost. The settings will be restored to factory state.
    Hope this helps!
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • Flash File Does Not Auto Resize !!

    I have done a flash file, very simple.
    When viewed on my 19" Monitor it fits perfect, but just looked on a 15" Laptop and the file is too big for it.
    Is there a way to make it autosize according to resolution
    The file is the top right banner on www.datanetuk.com/catalog
    Thx for your help
    Paul

    I have done a flash file, very simple.
    When viewed on my 19" Monitor it fits perfect, but just looked on a 15" Laptop and the file is too big for it.
    Is there a way to make it autosize according to resolution
    The file is the top right banner on www.datanetuk.com/catalog
    Thx for your help
    Paul

  • Is the camera flash supposed to go off with the alarm on the iPhone 4S when it is locked?

    I have just recently noticed that the camera flash goes off with the alarm in a three flash pattern when the phone is locked, but not when it isn't. I can't find a way to turn it off in the settings and was curious if this is supposed to happen or if it's a bug?
    Thanks in advance for your help.

    See this veeeeeeeeeery long thread.
    https://discussions.apple.com/thread/3404857
    It's an issue with hundreds of phones.  Some claim it's software related, some hardware, some say it's a mixture of both.
    Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
    Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
    So far the only solution that seems permanent has been to replace the phone.  But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
    I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing.

  • 6220 Classic Camera flash

    When camera flash is set to Auto, shouldn't flash automatic go off when I take a picture in a dark enviorment? With a dark enviorment I mean that if I don't set the Flash to On the picture will be almost black. I just tried it in a room with no window and no light, still it didn't use the flash. With the N73 it works as expected, the flash goes of, but the 6220 Classic, the flash doesn't go off. Is this a bug in the software or maybee it's just my phone.

    did you try to update your phone to the latest firmware?
     http://europe.nokia.com/get-support-and-software/download-software/device-software-update
    or via FOTA right off your phone.
    make sure you always do a back up of your data before doing any of this. if this continues to happen even after update i would take it to nokia care for them to have a look.  
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Camera flashes become banding once imported into AE

    Hello all, I'm working with footage that was shot in a club environment with camera flashes going off and once I exported said footage from Avid Xpress Pro (as QT mov with Animation setting) and import it into AE7 the camera flashes turn into visible bands of light that look really bad.  I've interperted the footage correctly (D1 720x486 29.97, lower field first) so I'm at a loss as to what is causing this.  I tried a levels adjustment to bring down the luminance but nothing changed.  Any advice would be greatly appreciated.
    Thanks in advance,
    Jason Coté

    Could you export a faulting frame from AE, and the very same frame from Avid and post them here ?
    If you read the file from QT, do you have the banding issue ?
    If you open the QT file in Avid, do you have the banding too ?
    I guess this problem could come from the conversion to QT animation, but i'm not sure.

  • Flash goes off when receiving texts

    Another thing I have noticed - sometimes when I receive a text, the camera flash goes off
    Anyone else have this issue?
    Martinfrommaldon

    @martin,
    The LED-on-message is a feature that can be enabled/disabled in Settings/General/Accessibility.
    However, if you don't have this feature enabled, there's a bug in your phone...
    This is the feature description, taken from the latest iPhone User Guide:
    If you can’t hear the sounds that announce incoming calls and other alerts, you can have iPhone flash its LED (next to the camera lens on the back of the iPhone). This works only when iPhone is locked or asleep. Available for iPhone 4 or later.
    Turn on LED Flash for Alerts: Go to Settings > General > Accessibility > LED Flash for Alerts.

  • Recent Software Update annoyance - Camera Flash notifications

    For the most part I'm fine with the recent update to the software-- still navigating around the changes and getting my setting preferences restored-- but I absolutely HATE that my camera flash goes off when I have notifications! Has anyone found a way around this?? I sleep with my phone on my nightstand since it's my alarm, and every time I got an e-mail in the middle of the night the light wakes me up. And when it's face down anytime the rest of the day it's blinding.
    Someone please tell me this isn't a permanent setting...

    buffster wrote:
    I just looked at accessibility and it isn't 'checked' for flash notifications.  So why is it doing it?  Annoying!  And I would think it is an unnecessary battery drain also. HELP!?!?!?
    Try turning it on and then off again. Sometimes that helps. You might want to try to search for the other discussion in the Verizon Wireless Community forum where they go into more detail about the issue and the fix.

  • Is there a way to use an off camera flash or remote flashes on a Rebel T5? (This is not a T5I)

    I have a Rebel T5 I just bought a few months ago. I like it as it is a great entry into DSLR. I will be looking at upgrading in a few months. But in the meantime, I just bought a speedlight kit (not Canon) and it came with 2 speedlights and the remote trigger and 2 remote receivers. Is there a way to enable the camera to use off camera flash? i was able to put one of the flashes on as an extrenal flash but I have not been able to figure out how to enable off camera flash.
    Solved!
    Go to Solution.

    Thank you Skirball. It did come with a trigger. I must not have had the correct settings. When I first got the set, I put the trigger on the camera and hooked the lights to the receivers and it did not work for me. I thought I needed a special setting. But I must have had the receivers set to camera instead of flash. Once I put it on today, it worked and triggered both flash units. Incase anyone else has this issue, the kit I bought from Amazon is the Altura 2 flash kit that came with 2 speedlghts, the trigger and 2 receivers. I paid $169 for it. But when I hooked them up today and had the receivers set to Flash, they both were triggered when I pressed the shutter button.
    Thank you again.

  • E71 camera flash not working with auto focus

    I have using E71 from last 2 months . As of now i came to know its auto focus option by pressing '2' button. Before flash was working fine with auto focus option but from last 2 days flash light is not working with auto focus option and pictures clicked comes to be very dark. Can anyone suggest how to sort out this problem.

    sir can you tell why my e71 camera flash is not working .i have tried the hard reeset also.flash is also on .please tell because i dont want to go ot the nokia centre and i dont want to tell this to mu father

  • Why does the flash go off by itself when not using camera

    Flash goes off by itself for no reason when not in camera mode

    I've never seen that on my G3.  I wonder if you have some app installed that uses the flash as some sort of notification.

Maybe you are looking for