Default 10g admin password

Hi, I'm new to Oracle & having installed the 10g personal edition, I now forgot the default admin password... Your help is much appreciated!!!

Hi,
How did you finally figure out the default password please? It didn't ask me while installing the database. I've tried:
system/manager
sys/change_on_install
scott/tiger
none of them worked.
Any help are greatly appreciated!!
--Rita

Similar Messages

How to change default admin password on Cisco Aironet 1040

How do I change the default username and password on the Cisco Aironet 1040. There is a default set and I want to change that to secure the device. I've checked the manual and can't seem to find the directions. Any ideas?

Hi Brian,
If this AP is already registered with a WLC then you can change it via WLC.
In WLC GUI, go to Wireless -> Select the AP -> Credential -> Override Global Credential-> Update username/pw/enable pw
In WLC CLI, you can configure it like this. If it is for all APs, then select all, otherwise AP name.
(WLC3) >config ap mgmtuser add username admin password Cisco123 secret Cisco123 ?
all Applies the configuration to every AP that does not have a specific user name.
Enter the name of the Cisco AP.
(WLC3) >config ap mgmtuser add username password secret
(WLC3) >save config
Are you sure you want to save? (y/n) y
If it is Autonomous AP you can configure using the "username xxxx password xxx" IOS command
HTH
Rasika
*** Pls rate all useful responses ****

Default Administrator Username & Password for Weblogic Server Admin Console

I created a new domain using the configuration wizard on windows (using config.cmd).
While configuring the domain, I didnt check any of the check boxes for configuring Admin Server, Managed servers, clusters...
Just gave the domain name and location of the domain home and clicked on create domain.
So automatically AdminServer is created and domain was created successfully.
After the domain is created, I started the Admin Server from the same configuration Wizard and clicked on Done.
Now the Admin Server is started successfully. But I dont know the Administrator username and password as I didnt configure it while creating the domain.
So how to login to Admin Console? What will be the default Administrator Username and Password to log into Admin Console?

Got the answer.
I tried with weblogic/weblogic9 and it worked.
I m able to login to Admin Console. So this should be the default Username and Password.
Please let me know your thoughts.

Default Username and password for CCM DC-Directory Admin

What is the default username and password for accessing dc directory for callmanager ?
TIA

Hi Zufi,
It should be;
Log in as Directory Manager. The password by default is ciscocisco.
Hope this helps!
Rob
Please remember to rate helpful posts........

Default username and password for 10g

hey guys does anyone noe the default username and password for the sql plus? version 10g

SQL*Plus does not need a username and password. E.g.
/home/oracle> sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Oct 3 14:31:43 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> prompt Hello World
Hello World
SQL>
Connecting to an Oracle database instance usually requires one to supply Oracle database authentication, e.g. a schema name and password. Unless of course the database uses external authentication in which case you do not need to manually specify an Oracle schema name and password.
Yes, using SQL*Plus as a client to connect to an Oracle database server typically requires a scheme name and password.
It is important to understand the difference - SQL*Plus is a CLI (Command Line Interface) client to Oracle. It is not the database. SQL*Plus does not need a username or password to load and use.
Granted, it is not of much use when not connected to an Oracle instance, but that does not change the point that SQL*Plus itself does not need authentication.

URGENT: OES 10g Admin server not coming up

Hi All,
The environment has OES 10g CP5 setup with WebLogic Server. There were no changes made to the env recently and all of a sudden OES 10g server has stopped working.
We are seeing the below exception in logs. Appreciate any help.
INFO   | jvm 1    | 2012/12/20 03:07:36 | ARME is started now
INFO   | jvm 1    | 2012/12/20 03:07:37 | <Dec 20, 2012 3:07:37 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm asiadmin.>
INFO   | jvm 1    | 2012/12/20 03:07:38 | <Dec 20, 2012 3:07:37 AM PST> <Error> <Security> <BEA-090060> <The AccessDecision class "com.bea.security.providers.authorization.asi.AuthorizationProviderStub" returned an error: com.bea.security.providers.authorization.asi.InvocationException: ArmeNOTREADY Exception: Engine did not recieve initial policy.>
INFO   | jvm 1    | 2012/12/20 03:07:38 | <Dec 20, 2012 3:07:37 AM PST> <Critical> <Security> <BEA-090404> <User admin is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
INFO   | jvm 1    | 2012/12/20 03:07:38 | <Dec 20, 2012 3:07:37 AM PST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User admin is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
INFO   | jvm 1    | 2012/12/20 03:07:38 | weblogic.security.SecurityInitializationException: User admin is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
INFO   | jvm 1    | 2012/12/20 03:07:38 |       at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
INFO   | jvm 1    | 2012/12/20 03:07:38 |       at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
INFO   | jvm 1    | 2012/12/20 03:07:38 |       at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
INFO   | jvm 1    | 2012/12/20 03:07:38 |       at weblogic.security.SecurityService.start(SecurityService.java:141)
INFO   | jvm 1    | 2012/12/20 03:07:38 |       at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
INFO   | jvm 1    | 2012/12/20 03:07:38 |       Truncated. see log file for complete stacktrace
INFO   | jvm 1    | 2012/12/20 03:07:38 | >
INFO   | jvm 1    | 2012/12/20 03:07:38 | <Dec 20, 2012 3:07:37 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
INFO   | jvm 1    | 2012/12/20 03:07:38 | <Dec 20, 2012 3:07:37 AM PST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
INFO   | jvm 1    | 2012/12/20 03:07:38 | <Dec 20, 2012 3:07:37 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
STATUS | wrapper | 2012/12/20 03:07:40 | <-- Wrapper Stopped
Following are the trials made without any success:
1. changed credentials in /opt/oracle/bea/wls10_3/ales32-admin/asiDomain/servers/asiAdminServer/security/boot.properties
2. Removed /opt/oracle/bea/wls10_3/ales32-admin/work/runtime/state.chk file and restarted
3. Renamed the ldap folder under /opt/oracle/bea/wls10_3/ales32-admin/asiDomain/servers/asiAdminServer/data/ldap
4. Changed password in boot.properties and ran asipassword.sh
          $ ./asipassword.sh admin /opt/oracle/bea/wls10_3/ales32-shared/keys/password.xml /opt/oracle/bea/wls10_3/ales32-shared/keys/password.key
          Enter password for alias: admin>
          Confirm password for alias: admin>
          Password saved.
          $
Edited by: 898990 on 20-Dec-2012 04:35

We are seeing the below messages in secure_audit.log:
2012-12-20 04:30:22,369 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR Event Type = Authorization Audit Event V2 - Event Type =
Authorization Audit Event V2 -- <<Event Type = Authorization Audit Event V2 ><Subject: 2
Principal = class com.bea.security.principal.ALESDirectory("RootOrg!AdminDir")
Principal = class weblogic.security.principal.WLSUserImpl("admin")
<ONCE><<svr>><type=<svr>, application=, server=asiAdminServer, action=boot>>com.bea.security.providers.authorization.asi.InvocationException: ArmeNOTREADY Exception: Engine did not recieve initial policy
at com.bea.security.providers.authorization.asi.AuthorizationProviderImpl.isAccessAllowed(AuthorizationProviderImpl.java:319)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

Default role with password - reality check

I support the database for an application. We upgraded from Oracle10 to Oracle11 9 months ago. Then recently we applied the OCT CPU.
The application admin says that they have a program that has recently stopped working that worked after the Oracle11 upgrade.
The application user has a default role which has a password. Is that possible? A default role with a password. Would this have ever worked in any version of Oracle?

Default role with password is a feature even available with Oracle XE. Default roles are activated without requiring role password in Oracle 10.2:
SQL> drop user admin cascade;
User dropped.
SQL> drop user test cascade;
User dropped.
SQL> drop role rwp;
Role dropped.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create user admin identified by oraclexe;
User created.
SQL> grant create session, create table to admin;
Grant succeeded.
SQL> grant unlimited tablespace to admin;
Grant succeeded.
SQL> grant create user to admin;
Grant succeeded.
SQL> grant create role to admin;
Grant succeeded.
SQL>
SQL> create user test identified by oraclexe;
User created.
SQL> grant create session to test;
Grant succeeded.
SQL>
SQL> connect admin/oraclexe;
Connected.
SQL> create table t(x varchar2(10));
Table created.
SQL> insert into t values('admin OK');
1 row created.
SQL> commit;
Commit complete.
SQL> create role rwp identified by oraclexe;
Role created.
SQL> grant all on t to rwp;
Grant succeeded.
SQL> grant rwp to test;
Grant succeeded.
SQL>
SQL> connect test/oraclexe;
Connected.
SQL> select * from session_roles;
ROLE
RWP
SQL> select * from admin.t;
X
admin OK
SQL> insert into admin.t values('test OK');
1 row created.
SQL> commit;
Commit complete.
SQL> select * from admin.t;
X
admin OK
test OK
SQL>There have been changes between Oracle 10.2 and 11.2 because the same script fails in 11.2 unless the role is set with the password:
SQL> drop user admin cascade;
User dropped.
SQL> drop user test cascade;
User dropped.
SQL> drop role rwp;
Role dropped.
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
SQL> create user admin identified by oraclexe;
User created.
SQL> grant create session, create table to admin;
Grant succeeded.
SQL> grant unlimited tablespace to admin;
Grant succeeded.
SQL> grant create user to admin;
Grant succeeded.
SQL> grant create role to admin;
Grant succeeded.
SQL>
SQL> create user test identified by oraclexe;
User created.
SQL> grant create session to test;
Grant succeeded.
SQL>
SQL> connect admin/oraclexe;
Connected.
SQL> create table t(x varchar2(10));
Table created.
SQL> insert into t values('admin OK');
1 row created.
SQL> commit;
Commit complete.
SQL> create role rwp identified by oraclexe;
Role created.
SQL> grant all on t to rwp;
Grant succeeded.
SQL> grant rwp to test;
Grant succeeded.
SQL>
SQL> connect test/oraclexe;
Connected.
SQL> select * from session_roles;
no rows selected
SQL> select * from admin.t;
select * from admin.t
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> insert into admin.t values('test OK');
insert into admin.t values('test OK')
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> commit;
Commit complete.
SQL> select * from admin.t;
select * from admin.t
ERROR at line 1:
ORA-00942: table or view does not exist
SQL>
SQL> set role rwp identified by oraclexe;
Role set.
SQL> select * from session_roles;
ROLE
RWP
SQL> select * from admin.t;
X
admin OK
SQL> insert into admin.t values('test OK');
1 row created.
SQL> commit;
Commit complete.
SQL> select * from admin.t;
X
admin OK
test OK
SQL>10.2 Security Guide says:
If you are granted a role protected by a password, then you can enable or disable the role by supplying the proper password for the role in a SET ROLE statement. However, if the role is made a default role and enabled at connect time, then the user is not required to enter a password.
11.1 and 11.2 Secuirty Guide says:
If a user is granted a role protected by a password, then you can enable or disable the role by supplying the proper password for the role in the SET ROLE statement. You cannot authenticate a password-authenticated role on logon, even if you add it to the list of default roles. You must explicitly enable it with the SET ROLE statement using the required password.
Edited by: P. Forstmann on 20 févr. 2010 10:28

Help with Oracle 10g--SYSDBA password

Hi,
I installed oracle 10g on my machine ( WIN XP Pro, 512 RAM ) . Installation was Ok and then I created a database which was created successfully.
But now I am trying to SQL PLUS to logon to database to run some scripts . I ma trying to login as SYS but it says I can only login in as SYSDBA or SYSOPR .
Problem is that while creating database it never asked for SYSDBA or SYSOPR passwords and I am just thinking may be there is a default password for these?
Please let me know how can I connect to database to run some scripts?
Any help will be appreciated.

Hi Khushhal Mahajan, Oracle Corporation has upgraded the database creation procedure from version 9i, that if database is created that prompts for a password. At that time we cannot use the default password & more over SYSDBA & SYSOPR are not user logins they are psudeo roles. So you must remember the admin password which will be prompted at the end of the installation. Try the following
sqlplus /nolog
SQL> connect / as sysdba
Before this set the environment variable to your database instance.
If you are connected alter the sys and system user and change the password.
kamalesh jk

How to change default internet access password in Gateway Max (for cable)

Hi All, My home boardband (home bundle with cable) connection has just been installed. I am trying to change the default internet access password. But I can not find out where to set the new password in my Gateway Max configuration page (192.168.0.1).Is there anyone having idea about that please? RegardsCheng

Hi Yeldarb, Maybe I do not describe the issue clearly. The "admin/password" is used for accessing gateway modem configuration page. But it is not what I want now. I am wondering the method for changing the default password which modem use to connect the telstra server. I think every telstra boardband client would have one username/password pair for access internet, right?

After recovery, admin password filled in with "dots" and cannot delete or change it

Hello.
I ran the Windows 7 updates yesterday, but only the necessary ones. I did not install any of the optional ones. After the updates completed, I turned the computer on and it was stuck in a loop cycle - starting windows, then the admin password log in box came up. The box was fiiled in (with "dots" but too many to represent my password) and the screen just quickly flashed back & forth between the log in screen and "password incorrect". I tried to switch user, and it flashed back to the admin log in.
I did a system recovery to factory defaults (after backing up all data) using the recovery discs. After recovery, the "Set a password for account" screen comes up with the box below "Type a password" filled in completely with dots. I cannot erase them with the backspace or delete keys. If I highlight it and then try erase it with backspace or delete, the cursor just moves to the right hand side of the password box, but it still doesn't delete the faulty password "dots" so that I can change it.
I tried to reboot by holding in the power button and then turning it back on. After selecting country & language again, the same password screen come up.
It is stuck! Any help would be greatly appreciated! I computer I have is the HP TouchSmart 310 PC 1155-Y.
Thank You!
This question was solved.
View Solution.

That is curious with a Recovery. First, try to reset the password using NTPassword. Make the CD, boot to it following the directions. If that does not solve the signon problem, consider installing the OS from a regular Windows 7 disk of the same version, using the key from the COA sticker.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Forgot my Admin Password to my HP Pavillion Windows 7 Home Premium Laptop

Hello,
Need help I forgot my admin password. I can login to other login but not do not have another admin acct. I need to update my pc but cannot. I do not have the original cd NOR do I want to do a system recovery to take it back to factory default settings because of important documents & tons of pics & videos saved.
Someone once posted to try the following steps to remove the password -> Restart your PC, and hold the F8 keyboard button and as you enter the Windows® Boot Menu you will see some different choices, choose Safe Mode with Networking. Now Windows® will start in Safe Mode. Select the default Administrator account from the login, the password can be blank. If you are lucky and passed the login, then you should be able to edit your original account. [[NOTE - I tried this & it did not work.]]
I had read somewhere just cant find it now that Microsoft had a program to safely remove an amdin password. Is this correct? Does HP or Microsoft have a way without loosing data? Are there any third party programs that anyone can recommend that can safely remove the password that I can use that will not reset my pc back to factory?
Any advice is appreciated.
Thank you,
Missiey

Unfortunately I am not local. I live in Europe.
Contact the Geek squad and let them know what the problem is.
Tell them that there are important documents on your notebook that you cannot lose.
That would mean asking them if they can guarantee that you won't lose your documents.
Ask them if they have access to a utility that will reset the password for you without requiring a reinstallation of the operating system. If they don't have a clue when you ask about MSDaRT's Locksmith utility, then find another shop. Many cities have independent technicians who can do this for you.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Default username and password Oracle Hyperion workspace/shared services

Hi Friends,
I had installed Install Oracle Hyperion Planning, Fusion Edition Release 11.1.1.3.0 (foundation services and planning)
but i am unable to login to workspace,shared services
what is the default username and password for these.Please let me know?
Regards,
DB

Hi,
Default Admin user is: admin and default PW: password.
If you have not yet changed.
Thanks
Focusthread Hyperion Trainer
[http://focusthread.com/training]

How do I change the admin password in SJSWS 7.0?

I've googled this, searched the forums, read the manual, but I haven't found anything that explained how to change the admin password for SJSWS 7.0. So, right now I'm stuck with "adminadmin" as the password, which I think is the default since I don't remember specifying that during install. Clearly I can't use this in production with the default admin password... sorry if this is a rtfm question, but I really didn't see anything in the manual about changing the admin password. Thanks!

You could use the following CLI command:-
wadm> set-admin-prop --set-password
More information about the command:-
http://docs.sun.com/app/docs/doc/819-3283/set-admin-prop-1?a=view
You could also use Administration console-
- Login to the Administration Console and click on the Nodes tab
- In the Nodes page, click on the Administration Server link within the Nodes table
- Go to "Administration Server Preferences" section in the General page and change the password

I get error message When I try to set admin password on Pixma MG2922.

When I try to set my Admin password on my Pixma MG2922.
I get an error message in the last box when I confirm the passwrd.
"Passord entered is invalid" .
I have tried everything.
Password was never changed from Default.
What is the Default password?
I was using admin for initial Log in and did not work.
Any help on ths wold be apreciated..
Steven Higgins
Solved!
Go to Solution.

Hi stevepse,
The default administrator password "canon" is specified for the printer at the time of purchase.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Rejecting my admin password thats never been chang...

BT Home hub manager keeps interupting and saying they can't connect to broadband and I need to change the admin password. However I am still connected and apart from the manager have no problems. I decided to change the password to see if it stopped it happening but the password on the back of the hub was rejected although it has not been changed as far as I know. Any idea's?
Thanks
Solved!
Go to Solution.

Can you actually connect to the broadband? If so, then it's probably just BT Desktop Help going haywire. Quite frankly, it's a largeley useless bit of software that causes more problems than it solves.
As for the hub password, check very carefully that you are typing it correctly - check uppercase vs. lowercase letters, and check for numbers that look like letters and vice-versa.
The hub normally asks for the password to be changed the first time anyone changes any settings, so it may have been changed some time ago. If all else fails, use the Reset to Factory Defaults , but be aware that doing so will lose all customised settings.

Default 10g admin password

Similar Messages

Maybe you are looking for