Default account assignment values during the life time of the session

Hi Experts,
In SRM7.0 default account assignment values in 'Change Personal Default Settings' has to be retained in the life time of the user login.
Eg. A user enters into SRM7.0 web screen(NWBC) and will go to 'Change Personal Default Settings' and enters the values and saves the values and he will do other activities like creating SC and other things, when user logoff from the web screen (NWBC), the values should wipe off and when he logs in again, there shouldnt be any values in account assignment in 'Change Personal Default Settings'.
Thanks
SR

Sam,
our client's requirement is, those values has to be cleared when user logsoff from NWBC portal, when again he logsin, values should be blank and user can enter the values according to his/her requirement.
we tried to capture the action under 'Logoff' button, but, as this button is written in HTML/Java Script, we couldnt able to capture in SRM and I am not Java known person.
thanks
SR

Similar Messages

Default G/L Account assignment value in Shopping Cart

Hello Experts,
Need your help but urgently.
There is a Requirement of creating new p.Category so inECC New material Grp is created and i repliczte the same in SRM system Development . Now i went to Default account assignment and assign my new P.Cateogry with default G/L account for Cost center.
It was working fine in Development but when i transport these settings to my SRM_quality system the source system for all the P.Categories Source system changes from QAS300SYCC to DEV300SYCC. i went to BDLS and run old and new logical system for table BBP_DET_ACCOUNT and source system gets changed but still when i create a Shppping cart default G/L account is not comming for all the P.Catoegories except the new one which i have created .
Smriti

Hi Smriti,
Please see the answer from a development colleague :
- We cannot recommend to transport IMG table V_BBP_DET_ACCT entries
from DEV to PROD for the following reasons:
a) F4-help entries of field CATEGORY_ID contains category GUIDs
     of LOGSYS DEV which may not exist in LOGSYS PROD.
b) If already entries in PROD exist in that IMG table it maybe
     overwritten.
- Recommendation:
Please maintain IMG table entries with CATEGORY_ID reference
always manually using F4-help (dropdown). Sorry for the inconvenience,
but CATEGORY_ID /GUID triggers backend finding and is a substantial
and unique key field in every SRM system which cannot easily be
reused in other logical systems.
Also see note 872533 top 3.
Hope this helps,
Kind Regards,
Matthew

How to make default account assignment category in planned order?

Scneario Description:
1. Sales order for a configurable parent item is created in ERP & order BOM is changed & transferred to APO. In APO MRP run takes place for that parent item, which creates a planned order with account assignment category "M" (M:Individual Customer w/o KD-CO.
2. Now based on the dependant requirement generated for parent item, MRP takes place for one of the child item in ERP & purchase requisition gets created for child item.
Question:
1. Can anybody help me how i can make default account assignment as "F" (F:Order) in the planned order of parent item?
2. PR created for child item also has default account assignment category as "M". we wish to change that to "F".
Thanks & best regards
Hemchandra & Sandeep Mandhana

Hi V. Suresh,
The account assignment category maintained in the requirement class for parent item is 'M'.
No account assignment category maintained has been maintained in the requirement class Semi-finished component (this component is sent for subcontracting).
The business process is as follows:
1. Create Sales Order for Parent say ME_PARENT.
2. Order BOM for ME_PARENT is created and subsequently cifed to APO.
3. PP/DS heuristic is run for ME_PARENT.
4. MRP for component ME_COMP is run in ERP.
It can be seen that purchase requistion for ME_COMP has a/c assgn category as 'M'. It seems that the ME_COMP has inherited 'M' from ME_PARENT.
We would like to have no a/c assgn category for ME_COMP.
Any pointers?
Regards,
Sandeep

How long is the life time of process scope variable ?

Hi All,
How long is the life time of process scope variable befoer it expires ?
Is it the same with the life time of session scope ?
How can we set the value in OAS when deployment ?
Thank you,
xtanto

Hi,
http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/devguide/communicatingBetweenPages.html
" Finally, processScope never empties itself; the only way to clear processScope is to manually force it to clear:
AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
afContext.getProcessScope().clear();
Otherwise the variable lives for the duration of the window process. The referenced document above also shows how to set a variable to process scope
Frank

Default account assignment in cost element creation

hi,
in the cost element creation transaction (KA01) I need the default account assignment to be the WBS element. but in the transaction only cost center and order is showing as dafault account assignment, how can I include the WBS as cost object?
Thanks
Edited by: gayani premawardena on Sep 3, 2010 12:24 PM

Hi
If you are aware of FI substitution or validation, it works the same way
1. Go to OKC9 and click on New entries
2. Enter your contr area and choose Event = Line Item and Save.. It would ask for a transport request
3. Now click on the magnifying lens icon, then drill down on cost accounting > Line Item. Now click on Create Substitution icon and give it a name
4. Now click on Create Step and write your substitution by choosing fields from the COBL structure
It should like like, Prerequisites: IF COBL - BUKRS = XXXX and Cost Ele = YYYY,
Action to be taken if Pre-req is met - Substitute WBS = ZZZZ
Regards
Ajay M

Default account assignment for Rate difference for sales a/c

When we try to clear the vendor through F110 we are facing error. Document posted with SDRU currency. It is expiry currency. It need to clear through USD . Vendor contain customer in the master data. But we are unable post in System No 1
Another system we are able to post. It is automatically taking GL accounts for rate difference accounts for sales and purchase accounts.
Here the entry is like below
001 18      vendor                           139,99
002 25      Customer                   488,98
003 50      Bank                340,98
004 40      Rate difference for sales a/c          4,69
005 50      Rate difference for purchases         12,70
We want to compare both systems to find out the reason why it is not posing in one system
Rate difference for purchases account assigned to OBYC-KDM
But we are unable to find the Gl account Rate difference for sales a/c where it is assigned.
We have seen OBKP, VKOA, OBA1 . Please let us know where this Rate difference for sales a/c may be assigned
Please let us know Default account assignment for Rate difference for sales a/c

Hi,
    Regarding the rate differences. These accounts come from OB09 where it is defined for the Reconcilliation account in the customer/ Vendor.
The account "Rate difference for purchases" is coming from OB09 , it is not from OBYC-KDB in this case.
Kind regards

Default Account Assignment

Hi all,
I want to have a default account assignment category for the PR document type.
Eg: When I use the particular document type there should be only one account assignment "K". I want to remove all the other account assignement for the particular document type.
How this can be achieved?
Thanks in advance.
Regards
Sachin

hi,
u have to go for user exit/badi

Default account assignment category in ME51N/ME21N

Hi,
I want to default account assignment category ( KNTTP) based on document type while creating PR and PO, there are 4 different document types, Can this be achieved through config settings?, I am writing code in method PROCESS_HEADER of BADI ME_PROCESS_REQ_CUST, I am able to get header data using method GET_DATA but not able to use method in item interface SET_DATA. If anyone has achieved this please let me know.
Thanks

one of wayout is to set defaul value in user screen. set required account assignment otherwise use customisation
regards
points if helpful

Default Account Assignment (OKB9)

Hi Gurus,
We are trying to post a document using txn MIRO. There is a tax on the material & the same gets calculated creating a separate line item.
We have maintained the Cost Centre & Internal Order for the tax G/L account in OKB9.
The cost centre gets updated, however the Internal Order does not get updated in the tax line item.
When we try to post the same transaction using FB01 with the same tax code, both the internal order & cost centre get updated in tax line item.
Can anybody help on this, please ?

Hi,
Good morning and greetings,
Please go through the following SAP OSS Note
Note 409520 - Goods/invoice receipt: Default account assignment ignored
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Default account assignment in Shopping Cart in SRM7.0

Hello,
We are on SRM 7.0 , SP07 and ECC 6.0 EHP4
I am facing issues with default account assignment behaviour in my system .
When a user is creating shopping cart then G/L account is picked based on the settings in SPRO ( Product Cat, Account *** Cat and G/L account ) but i am noticing in my system when i put default in user attributes "PPOMA" suppose cost center "CC" then only it is picking default G/L account corresponding to that product categary . If i remove that Default tick from the user attributes then system is not picking default G/L account and also i checked in BBP_PD its not saving there.
Any one of you had come across this strange behaviour please let me know if there is any SAP Note for this.
Regards
Ashish

G/L Account is defaulted for the combination of Prod Cat and Acc *** Cat. Hence, it appears in SC. When you remove the default settings in PPOMA_BBP, it doesn't work even after putting Acc *** Cat in SC because of standard bug.
See if these Notes help you -
1420241
1420622

How can i cancle the life time on ipsec

hi
when i do show crypto session detail command i get this following massage:
Interface: FastEthernet0/1
Session status: UP-ACTIVE
Peer: 172.30.102.101/500 fvrf: (none) ivrf: (none)
Phase1_id: 172.30.102.101
Desc: (none)
IKE SA: local 172.30.102.102/500 remote 172.30.102.101/500 Active
Capabilities:D connid:84 lifetime:23:55:29
IPSEC FLOW: permit ip 172.30.102.100/255.255.255.252 172.30.102.100/255.255.25
5.252
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 16 drop 0 life (KB/Sec) 4477653/3329
Outbound: #pkts enc'ed 16 drop 4 life (KB/Sec) 4477653/3329
That mean i have a lifetime with as appear in the example : 23:55:29, and after that time the the ipsec is getting down.
how can i disable this life time,that the ipsec(crypto)work allways.
thanks.

Menash
The lifetime of the Security Association is part of the design of IPSec and you can not disable it. The purpose of the lifetime is to periodically force the peers to negotiate new keys. If the peers kept the same key always it would make it easier to crack the encryption but forcing periodic negotiation of new keys helps provide protection for the traffic. You can configure a longer lifetime if you wish, but you can not disable the lifetime.
HTH
Rick

Consumption during the processing time of the production order

Which adjustments must be made in the material master for the calculation of the lot size in the MRP run, that the consumption of the material during the processing time of the production order is considered for the calculation of the lot size.

Hi ,
You have to judiciously indicate the re order point in the material master( the re-order point is the sum of saftey stock and consumption during replenishment lead time).
How ever , this does not in any way influence the lot size , but only influence the no of lots i.e the procurement proposals. The lot size is determined by the lot sizing procedure selected by you , depending on various factors like agrrements with your vendor , optimum lot sizes to reduce the cost of procurment and storages etc.
You can refer to the following url for details on lot size :http://help.sap.com/saphelp_47x200/helpdata/en/fe/819b9f643b11d3b4e40004ac160649/frameset.htm
and for details about re order point :
http://help.sap.com/saphelp_47x200/helpdata/en/db/6f143ea7ec11d3a8330000e82a3c24/frameset.htm
Hope this information will be useful.
Regards
Raghuramam.

I want to check the status of application No. For it is written in my account was canceled and I did not do so I urgent news about his condition and the reason for canceled I redial the same time as the sender befo

Thank you for your attention
I want to check the status of application No. W439602096
For it is written in my account was canceled and I did not do so
I urgent news about his condition and the reason for canceled
I redial the same time as the sender before you
We are waiting for you

This is a user to user forum. You are not talking to Apple here. We cannot help you; you will need to contact wherever the order was placed.

What is the life expectancy of the hp laser jet p3015 printer?

What is the life expectancy of the hp laser jet p3015 printer?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go? Also, are there any compatiility issues with newer models and G5/G4s?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

Default account assignment values during the life time of the session

Similar Messages

Maybe you are looking for