Default Action

In my form, if I press the <ENTER> key the form submits but, since no command_button was pressed, no action is invoked...the question is: is there a way to specify a default action for the form?
Regards
Alberto Gaona

Same question, different day.sorry for that
So, if jsf-ri does not solve this problem before final
release, this problem become a problem for most
developers.I can live with that maybe issuing a JavaScript keystroke event catcher and forcing the user to actually press the button instead of hitting <ENTER>. Can the user live with that? I don't know.
Regards

Similar Messages

Problem accessing /config_general/null/Default.action Reason:There is no Action mapped for namespace/ config_general and action name default

in use:
vRO 5.1
eclipse 3.7.2
vRo plug-sdk 5.1
steps:
1.create a plug-in project from samples(choose solar system)
2.find the dar package and upload it by vRo configuration
3.vRo configuration said upload successfully,but the solar system configuration is not properly configued..
problem:
Problem accessing /config_general/null/Default.action Reason:There is no Action mapped for namespace/ config_general and action name default
How to solve it??
Thanks so much!!

There was problem from crm side...its working now..

How to change default action "alarm" for all signatures ?

My question belongs to a Cisco 1712 (128 MB, IOS 12.3T, SDM 2.5 installed):
I'm trying to change the default action "alarm" to "alarm,reset,drop" for all signatures of my custom set.
However doing so via SDM fails. First, it appears as being done correctly, but after compiling the signatures again, the default values are back there (in the same sense, I was unable to delete signatures, works just using the CLI).
I followed the instructions at cisco.com:
router(config)#ip ips signature-definition
router(config-sigdef)#signature 6130 10
router(config-sigdef-sig)#engine
router(config-sigdef-sig-engine)#event-action produce-alert
router(config-sigdef-sig-engine)#event-action deny-packet-inline
router(config-sigdef-sig-engine)#event-action reset-tcp-connection
router(config-sigdef-sig-engine)#exit
However ip ips signature-definition is not understood by the router, so the procedure fails.
Can you please assist me ?

You can use IOS command-line interface (CLI) to change signature actions for one signature or a group of signatures based on signature categories. The following example shows how to change signature action to alert, drop and reset for signature 6130 with subsig ID of 10.
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#ip ips signature-definition
router(config-sigdef)#signature 6130 10
router(config-sigdef-sig)#engine
router(config-sigdef-sig-engine)#event-action produce-alert
router(config-sigdef-sig-engine)#event-action deny-packet-inline
router(config-sigdef-sig-engine)#event-action reset-tcp-connection
router(config-sigdef-sig-engine)#exit
router(config-sigdef-sig)#exit
router(config-sigdef)#exit
Do you want to accept these changes? [confirm]y
router(config)#

Regarding JSF Default action problem in IE

Hi,
I am using Jsf:Default action inside my submit button.In my form I have row of two buttons submit and reset.When I use my tab focus on reset button and when I am clicking enter submit default action is getting fired rather reset action.More over if I am using spacebar after tab focus reset button is called as expected.The problem identified is only with IE browsers
In case of Mozilla,default action is overridden by tab focus action and working properly.
Please advise me how to solve this issue in IE
Note:The j4j:defaultAction custom component included in the j4j tag libraries allows you to define the default action for a form by adding <j4j:defaultAction /> as a child tag to the commandButton tag.
http://www.jsftutorials.net/defaultActionTag.html
Edited by: Ravishankar_R on Mar 24, 2010 12:09 AM

Amit,
Thanks for your answer. I fixed it using javascript .First I got all the buttons in the DOM and did a check to find if there is any current focus using document.activeElement.type="button" else to go with default submit action.
Thanks,
Ravi

Windows Client MP is using the default action account to write to the Data Warehouse

Hi,
I have recently installed SCOM 2012R2, and am in the process of migrating everthing from SCOM 2007R2.
Just after I installed the Windows Client MP (version 6.0.7250.0), I started getting this Event 11852:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error
: Cannot open database "OperationsManagerDW" requested by the login. The login failed.
Workflow name: Microsoft.Windows.Client.Win7.ComputerGroup.MemoryTrendsRAM
Instance name: Microsoft System Center Data Warehouse
Instance ID: {16781F33-F72D-033C-1DF4-65A2AFF32CA3}
Management group: 2012SCOMDEV
This is happening every 7 days and only happening on the Win7 Management pack. I checked the DW logs and found that it was using the default action acount (SCOM ACTION)to send to the DW. This account doesn't have access to the DW DB.
I assume it should be using the Data Warehouse action account. This is how the acount is setup
Can anyone tell me where I'm going wrong here? I have not had to touch the permissions for any of the other Management packs. the rest of them just work.

For this issue, you can check below link
http://blog.metasplo.it/2014/01/scom-2012-oledb-module-0x80004005.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

How to set the default action of slide switch to auto-rotate

Is there a way to set the default action of the slide switch to auto-rotate during the OS loading instead of volume setting?

You change the function of the side switch with Settings -> General -> Use side switch to:
I don't know what you mean by, "during the OS loading".

KDE4 default action on move/copy a file

Hi all
I thought this would be a simple one, but I can't find an solution at the moment.
I'd like to make move the default action when I drag and drop a file in dolphin etc but it just prompts me to move or copy. Yes, I know I can hold the shift key down to move the file, but I'm sure this was configurable in KDE3.
GregW

import java.net.*;
import java.nio.channels.*;
import java.io.*;
public class filetest
final int transferunit = 1024;
public static void main(String[] args) throws Exception
new urltest("nslogo_t.gif", "test.gif");
public urltest(String filer,String filew) throws Exception
FileChannel fr = (new FileInputStream(new File(filer))).getChannel();
FileChannel fw = (new FileOutputStream(new File(filew))).getChannel();
int pos = 0;
int len;
while((len = fw.transferFrom(fr,pos,transferunit)) == transferunit) pos += len;
needs jdk1.4

Default action for access list Deny

Hello,
Is it possible to change the default action for an access list deny? Can the ASA be configured to send an icmp unreachable rather than just dropping the packet if an access list denies the request? I have a situation where I would like to restrict access to a specific server for a select number of users. The problem is that the restricted workstations attempt to connect to the server at log in. Since I cannot control the log in script for those users, I was hoping to use the ASA firewall instead. However, using a deny statement causes the workstation to repeatedly send SYN requests for 60 seconds. The restricted users experience an unacceptably long delay at log in. I was hoping to be able to configure the ASA to send an icmp unreachable message for those users and avoid the wait.
Thanks,
Ann

Hello,
As the firewall it's supposed to be invisible there is no way the ASA could send this particular messages, sorry to inform you that but you could request this particular feature with your Cisco account Team.
Regards,
Julio

Default Action/Effect in an Action Set in PSE5

I have a Photoshop action set that contains a "main" action that performs some functionality and calls a bunch of "sub" actions. The main action is listed first in the set and is automatically picked up as the default action and executes successfully when installed into PSE6, PSE7 & PSE8 and also works as expected in a German version of PSE5 but in an English version of PSE5, somehow the second action (ie a "sub" action) is being executed rather than the first. Is there any way of configuring the default action or forcing PSE5 to recognize the first action as the action to run? If not, does anyone know what algorithm PSE uses to determine the action to run? The action being run isn't first (or last) alphabetically nor positioned first (or last) in the action set. Any thoughts/assistance would be greatly appreciated. Thanks.

Thanks for the response. I think I confused things by bringing up the German version... The action was created in a standard English version of PS CS2 then adjusted and resaved in a standard English version of PS7. It was then packaged and tested in English (and non-English) versions of CS3, CS4, CS5, PSE6, PSE7 & PSE8 without any issues. It was also tested in a German version of PSE5 and worked without any concerns but when tested in 2 different standard English versions of PSE5, it appears that the second action in the action set is the one that is being recognized and run, rather than the first action in the set. The first action is named as "Make Patterned Papers" and the other 20 or so actions are named as "code -- (reference number)" in a lame attempt to slightly obscure the functionality from the PS users. The first "code -- (reference number)" action listed after the "Make Patterned Papers" is the one that is being picked up by PSE5 as the action to run. The actions are not listed in alpha/numeric order and the action that is being picked up by PSE5 is not the first alphabetically either. I tried copying all of the actions to a new action set and using this instead, but had the same result.

Default action in actionmap

hi, i was wondering how to put back the default action for a key... like what is the default action method? is there anywhere i can get a list?

hm... i managed to overwrite my previous function, when i realized that it didnt' have an entry in the input map in the first place =P
what i am making is a focus controller which controls the cursor on a page with multiple text fields. when a certain char is pressed, then the focus will redirect to the appropriate field, and then begin typing.
my thought process goes along the lines of this:
take out the entry in the inputmaps of all my jtextfields so that it gets passed on to their parents, which is the highest ancestor. the ancestor decides who gets the focus and transfers it, sending the prefix with him. i think my problem is that the ancestor does not have an entry in his input map. it is to my understanding that if you add null to the inputmap for the key, he will pass the key to his ancestor. i want him to pass it to his child. any thoughts?

Default Action in JSF

Hi all,
I have a problem in submitting form by pressing enter key.
I am using <h:commandButton> in my form,its not getting clicked
whenever i use enter key to submit the form,but it works fine if i use mouse to click the button.
This problem occurs only in FireFox mozilla browser not in IE.
I tried to catch the key code for Enter key like
if (keycode == 13)
                         alert('hi...');
                        document.getElementById('sv:helloForm:submit').click();
                return false; }The above code catches key code correctly for enter key,but button click is not happening(No mistake in button ID,every thing is perfect).
I guess its a problem with JSF default action.
did any one ever come across this issue???
regards,
sundar

sundar82 wrote:
I have a problem in submitting form by pressing enter key.The enter key fires the first occurring HTML <input/button type="submit"> element in the entire HTML <form>, if any. Maybe your h:form component is covering much more than only the actual form. Maybe you´re using commandlinks somewhere in a navigation menu in the same page and the same form or so?

How can I adjust size of default action frames

Hi, How can I adjust size of default action frames they are very thin. I have tried double clicking on that part I think it is in the actions but can only adjust the drop shadows etc not the actual size of the frame ie like in the wooden frame.
hop you can help

I think I get what you meant now …
The »Transform Current Layer«-step in »Frame Channel – 50 pixel« might be the one you want to edit (»Toggle dialog on/off« for example or replace it with a newly recorded different transformation).

Default actions folder in Photoshop CS6

I installed Photoshop CS6 on my iMac and MacBook. The MacBook has a "Default Actions" folder in the actions panel with 13 default actions. This folder did not appear on my iMac following install. However, my iMac has several image and text effect actions installed that did not install on my iMac. Would like to have the Default Actions on my iMac and text and image effect actions on my MacBook. Not sure how to do this.

I'm a PC user ther are some differences between PC and the Mac but not that much
Actions are savet in sets and han File name .atn extentsios thes can be saved and loaded from any folder on you system Photoshop install some action step in its install tree
..\presets\actions\ on windows 9 sets. If you load and save actions from/to othe folders you photoshop setings will remenber the folders your default mad change presets\actions
Commands.atn
Frames.atn
Image Effects.atn
LAB - Black & White Technique.atn
Production.atn
Stars Trails.atn
Text Effects.atn
Textures.atn
Video Actions.atn

Default Action type when hire internal employee

Dear all,
How to set Default Action type when hire internal employee?
Thanks,

Hi,
May be that. When i transfer applicant that is hired internal, the action type is default Reentry into company. So how to change this?
Edited by: Quang Le Vinh on Nov 7, 2009 2:54 AM

UWL - Launching default action in a DisplayAttribute

Hi experts, any help is greatly appreciated
The standard UWL column "Subject" is a link which launches the default action for any itemtype. How do we replicate that feature for our own custom attributes?
When we use DisplayAttribute tag, the ActionRef only accomodates one action. This is problematic when the view has several itemtypes that share the same attribute name but have different default actions.

Solved, sorry that was a stupid question =)

Defining default action in the pop ups declaratively.

Is there a way to decoratively define the default action in the pop up? My requirement is that, I have a pop up dialog with two buttons 'ok' and 'cancel', and I would like to execute OK action when user press the Enter key in the dialog.
Thanks.

Hi do this for me and tell me if there is anything listed.
Choose Mail > Preferences and click Composing.
Select "Automatically complete addresses" and click the Configure LDAP button.

Default Action

Similar Messages

Maybe you are looking for