Default alarms changed.  Why?

For many moons since, my iCal default alarm in Inspector has been to send an email to me, which is what I wanted.
Recently and with no known action by me, (I cannot with certainty say when but perhaps with the upgrade from OSX.6.5 to OSX.6.6?) the default alarm in Inspector has changed to Sound / Basso / 5 hours before.
How can I get this to go back to my preferred email default and why has it suddenly changed?
I've looked in Preferences and can see no way of changing it, nor can I find anything which I might be able to change elsewhere.
Many thanks in advance.

May I trespass on your collective good will and resurrect this query? It's still driving e nuts!
Another thread (here: http://discussions.apple.com/thread.jspa?messageID=12785168&#12785168) talks about changing the default alarm sound, but I want to change the default alarm type.
I'm very nervous about altering "standard" files as I'm highly likely to screw things up, so can anyone help me change the Alarm default to email rather than an alert sound?
Given simple instructions (+very very+ simple!) I'm prepared to have a go at editing things, but only if they are really really simple and understandable by a lobotomised amoeba!
Until an update a while back, email was the [my?] default, but it's now Basso sound which is absolutley useless for my needs.
I know I can change it manually every time, but that is a right royal pain in the fundament and I often forget.
Thanks in advance.

Similar Messages

  • How do you set/change the default alarm TYPE in iCal?

    I like to think I'm a power user, but this one I just can't figure out.  The question/problem is: How do you sent the default alarm TYPE in iCal?  The problem is illustrated in the picture below in the blue circled area.
    Specifically, whenever I set a new event in iCal, it defaults to this window with the default alert being "Default (1 hour before)."  The one hour before is fine, but the problem is, WHAT is the default?  It seems to be just a sound, but that's not good enough to actually alert me of anything.
    The goal I'm trying to achieve with this post is to determine how to CHANGE the "default" new event alert FROM "Default (1 hour before)" TO one of two alerts that I actually find useful:  I want MY "default" new event alert to be either "email" to the primary address, OR, "Message with Sound". 
    Any ideas, folks?  Thanks.

    Understand.  I am in the edit mode for my contact.  I see all the contact info.  There is no right click or other means to change the DEFAULT address that autofill uses (it also is first to appear if I type my name in an e-mail). For instance for a group e-mail you can change the default addresses of each contact by control-clicking on the group in Address Book. I can't seem to make the default change in my v-card.

  • Possible to change default alarm from "Message with Sound" to "Email"?

    I was wondering if there is a way to change the default alarm when creating an event in iCal, from "Message with sound" to "Email". The option is not available in preferences, and I was just hoping that there might be a way to change the default, using Terminal, and if not, perhaps there is another way. If anyone knows of a way to accomplish this, I’d sure appreciate it.
    Thanks very much for your help.

    Your not alone - I'm also looking for a solution to this problem.

  • Change default alarm

    Hi chaps, when I add an event to iCal it's alarm for email defaults to 15 minutes before, I always change this to 1 day before, is there a way of changing the default please ? Regards Roger

    See here for BBEdit, however you don't need to be editing the plist file using an advanced text editor to do this.
    The terminal has a defaults command that allows to to do this without messing around your preference files with a text editor (to my mind a sure recipe for disaster if you don't know what you are doing).
    Quit iCal.
    Open the terminal (Applications/Utilities/Terminal.app)
    Copy the line below (changing the word Tink to the name of the sound you want) into the Terminal window and press return
    defaults write com.apple.iCal 'Default alarm sound' 'Tink'
    Open iCal, new default alarms should now use that sound.
    Best wishes
    John M

  • Can i change the default alarm sound on Iphone 4s

    Can the default alarm sound be changed for new alarms. My mother got an Iphone 4s recently and she can use Siri to set alarms for her, however the default alarm sound is always chosen and that is just not a loud enough sound. And it takes a some messing about to change the sound of the alarm and my 60 year old mother has trouble with changing it.
    Is there any way i can make it change perminently, any help would be much appriciated.

    The default alarm sound is the last sound you used.

  • How can I change the default alarm for events in ical?

    How to change default alarm

    I've been curious about this issue as well. I think it would be nice if there were more options to select the default alarm... from within the preferences themselves. Even being able to choose how many days before vs. always figuring out how many minutes are in multiple days.
    While someone has found a method for changing the sound to accompany messages, users are still not able to select the type. I prefer message only (no sound), although I supposed this is the same as the current default minus any sound. I tried blank and "" entries for 'Default alarm sound' in the .plist file with no success (blank reverts back to Basso, and "" just didn't work).
    I wonder if there are some other items that could be listed in the .plist file to offer more choices such as "Default alarm type". Is there a way to figure out what key variables/values iCal uses for? Someone must have figured out that iCal will look in the .plist file for a 'default sound value'. I'm guessing that there are more of these values that could be set by the user.
    A similar question - it would be nice to be able to set the default alarm time for all-day events. I suppose it doesn't matter all that much since 11:45pm probably means I'll just get the message the next morning; I still guess I'd prefer something like 8am though.
    Forgive the novel...
    -John

  • Default alarm for all-day events

    When I set up iCal, I used a default alarm at 11 pm for ALL-DAY events.  I don't stay up that late anymore, and now I have to manually reset the alarm to a more sane time every time I enter an all-day event.  How do I change the default to earlier?  Note: This is not the same default as for regular timed events ... that one I can change in Preferences.

    Well, I couldn't figure this one out, so I just moved the calendars back to my main machine, and published them to the web for sharing with my laptop. On my main machine they worked fine.
    Can't figure out why it wouldn't work on the server. Maybe it'll change with Leopard's iCal server.

  • ICal default alarm

    I have iCal preferences set up to automatically create an Alarm 15 minutes prior to the scheduled event. When an event is set up as "all-day", the alarm will go off at 11:45pm the prior day. This makes total sense on why Apple does this and it is pretty obvious that a user can change the alarm start time. However, if my preferences have been set up that my day starts at 8:00am and ends at 5:00 (my work day), wouldn't it make more sense that an event that you create as "all-day" default to an alarm start time of 8:00am (user start time preference) and not at midnight. Why would I want an alarm to go off at 11:45pm when I'm in bed sleeping? It would make more sense for the alarm to go off at 7:45 am (15 minutes prior to my day start preference).
    is there a defaults write com.apple.iCal setting that I can change to make this happen?

    No response from anyone from Apple on this. I did find that you can tell iCal to set a default alarm +- minutes. So If you set an all day event and want the alarm to go off at 8:00 am, you would go into iCal preferences and set default alarm to go off -480 minutes. That works good for all day events but the thing that stinks is when you go to set up a new event that only lasts from say 4:00pm - 5:00pm, this default setting will set an alarm 8 hours AFTER the time. Not what you really want. So, the answer I'm afraid is to go into each event that you need an alarm set, and change the alarm time manually. I'm hoping this will change in a future update due to the many MS people that don't like this default setting.

  • Default Alarm

    Can anyone tell me why the default alarm would be set for minutes only and is there a way it can be changed to days or hours in the preferences.

    I'd bet the RFC default unit for calendar alarm data is minutes, so it wasn't actually made that way but "not" made in any other particular way; just pure data fitting the format.
    It was probably going to mean a week's work for the intern to customize that object within the dialogue and get interface approvals so they just prioritized it way down the list. A "don't fix what ain't broken" kind of argument while you work on more important things.
    Maybe you should make an Apple recommendation record on that single issue? Seems worthy.

  • I had Firefix, however I downloaded the newest Firefox along with all plugins. Now when I click in the desktop icon firefox refuses to open my default webpage. Why?

    I run Windows 7. I downloaded Firefox 6.0 for Windows which resulted in the following which I cannot fix:
    "I had Firefix, however I downloaded the newest Firefox along with all plugins. Now when I click in the desktop icon firefox refuses to open my default webpage. Why?....How do I fix this"
    I can go to internet explorer or AOL and it opens right up to my homepage but not when I click on Firefox.

    That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Modifying the default alarm?

    The new default alarm option is exactly what I need, but in the preferences it only lets you specify how many minutes ahead of the event it occurs. The default seems to be "Message with sound" which I'd like to change to just "Message". Anyone catch something I missed?

    I am also having the same issue. When I create a new "to-do" it defaults to the day before @ 11:45pm. How is this default changed?

  • Default alarm time

    Ever since I installed 10.5, when I create a To-Do in mail, the default alarm time is 11:45 PM.
    Is there anyway to change this default to a time I might be awake? Or maybe set it to default to the time you're entering the to-do?

    I have an E5, same thing... I looked in Configurations, but no luck. This should be in some config file... but no idea where to look.
    Sorry I can't help...
    Regards.

  • Ical default alarm time

    Every reminder I set in ical pops up with a default time of 11:45 p.m. Every time I have to change it. If it would use a default time of 9 a.m., many times that would work fine for me unless it is a specific meeting. How do I change the default time ical gives me?

    The original post by Saluda Judy is almost exactly my question, except my issue -- which I believe is related to if not the same as the ical question -- is the default alarm time for TO DOs. When I create a 'to-do' in imail or directly in ical, and give that to-do a due date, then set an alarm for that to-do, the default time for the alarm is 11:45 pm the day before the due date. I would like to change the default time to something other than 11:45 pm the day before so that when I set an alarm for a new task, the alarm time is 8:00 am the day of, or whatever I decided to set my default to. I'm tired of having to change the alarm time for every to-do for which I create an alarm.
    And to reiterate; I don't want to create an alarm time by default for each to-do. Rather, when I choose to create an alarm time for a to-do, I want the alarm time to default to my desired time (8:00 am, for instance).

  • Can you set the default alarm to be an email alert?

    Just curious. I noticed that in the preference window, it allows you to set a default alarm that always starts as a sound.
    Any plug-ins that will do this?
    Thanks a bunch.

    Try this add-on so you can schedule the sending of multiple emails:
    https://addons.mozilla.org/en-US/thunderbird/addon/send-later-3/
    http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html
    There's another add-on that might work in current TB versions:
    https://addons.mozilla.org/en-US/thunderbird/addon/blunderdelay/

  • How can I remove default alarm for events in iCal on devices ios?

    Whenever I add an event to my iCal calendar in Mounain Lion it will automatically add one default alert only on my iphone and ipad. These default alarms are not displayed on my macbook or icloud.com
    Default alarms are disabled in macbook, icloud.com, and my ios devices.
    How can I remove default alarm for events in iCal on devices ios?
    Thanks and sorry for my english.
    MacBook Pro, Mac OS X 10.8

    OK, so I have had this issue for the past several months. I think it all started when I upgraded to ML from SL and migrated my calendars and contacts to iCloud. That was a couple months ago. But now I am running 10.8.2, and about two weeks ago I upgraded my iOS devices to 6.0.1.
    I don't seem to be having any issues with events that I create now, but all those old events that were migrated to iCloud a couple months ago, many of those sound alerts on the iOS devices even though there was no alert defined when the event was originally created. I have always had alerts off by default both in iCal and on the iOS devices.
    So here's the question: is there a way to go through and disable all these spurious event alerts? I've been disabling them as the event reminders come up, but it's irritating. It would be nice if there was a way to turn them off all in one shot somehow.

Maybe you are looking for

  • How to formulate SQL that need to use some XML data in a clob?

    Hi, We just created a new 8i table that has some regular fields as well as a clob field that contains XML data. How could I bring back the value of a spcific element in the XML field and compare it against a regular field? For example, I want to make

  • Chinese Character cannot be decoded

    hi, I would like to implement two JSP pages. The first JSP is just a html form, which is used to submit unicoded chinese data to a target JSP file. The target JSP file received those data and display. <meta http-equiv="Content-Type" content="text/htm

  • Best guess on how this was done

    On this video there is a cool animation where a line moves across the screen and then a circle attached to this line pauses on the screen. There is a picture in the circle. The viewer has a chance to see the circle with the picture in it, then the li

  • Fire fox not responding, locks computer, have to use task manager to reset

    Firefox continually stops responding when I click on a bookmark. I get the info at the top of my screen that Firefox is not responding. Now if I go to MS office and am working in Word with Firefox in the background, word freezes. I go to Task Manager

  • Scrabble for iPad isn't working.

    I have the most updated version of iOS software. I deleted the app and reloaded. I got the game, but if someone invites me to play I'm prompted to download the app again. No way to connect with the person who I'm trying to play with.