Default Audio Setting

What happened to the default audio language setting? Can't find it under Preferences > Playback anymore.
I'm from Germany and i don't like german dubbed versions of movies, i prefer to watch them in English. A long time back i changed the default playback language and all movies i watched on itunes automatically played back in english.
Since 10.9 or iTunes 11 (cant tell for sure...) the setting has disappeared and i have to manually switch the language on every movie i start watching.
Has this setting been removed or is it an error?

Looks like it is removed, how ever you could watch the file with QuickTime as there is an option in QuickTime to select the language. Remember that iTunes is a data base manager and QuickTime is the engine that plays the various CODEC's.
Select the file in iTunes - control click and select 'show in Finder' - Select the file in the Finder and control click again 'Open with' select QuickTime - from the QuickTime menu bar select Vew>Languages - see if there are any other languages listed.
MJ

Similar Messages

  • Set default audio track for playback in Source monitor

    So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
    They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
    My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
    Thanks!

    I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

  • Set default audio device?

    Prior to installing OSX Yosemite, the system audio output would be automatically switched to my USB audio device as soon as it was plugged in and detected by the OS.  In Yosemite, I have to manually switch the output from Internal Speakers to the USB device.
    Is there a way to force the setting to change on its own, as it did before? 

    Hello
    I do not want to hard wire the Ipod HIFI. I understand that if I used the line out feature the system would recognize the device. I would like the system to recognize a remote speaker connected by wireless network and to accept this remote speaker as the default audio device. Not likely but should be an option.
    Cheers
    Warrene
    iMac intel Core Duo   Mac OS X (10.4.6)   Airport Extreme and Express, iPod HIFI, iPods
    iMac intel Core Duo   Mac OS X (10.4.6)   Airport Extreme and Express, iPod HIFI, iPods

  • Set an iPod HIFI as the default audio device

    Hello
    Just "switched".
    I want to bypass the internal speaker to use an Ipod HIFI as my default sound device.
    Currently it is not recognized under System Preferences as it is commicating with my iMacvia airport express.
    Any way to get this listed under "Choose a device..."
    Thanks
    Warren

    Hello
    I do not want to hard wire the Ipod HIFI. I understand that if I used the line out feature the system would recognize the device. I would like the system to recognize a remote speaker connected by wireless network and to accept this remote speaker as the default audio device. Not likely but should be an option.
    Cheers
    Warrene
    iMac intel Core Duo   Mac OS X (10.4.6)   Airport Extreme and Express, iPod HIFI, iPods
    iMac intel Core Duo   Mac OS X (10.4.6)   Airport Extreme and Express, iPod HIFI, iPods

  • ITunes 10.6.3.25 does not stop being the default audio player

    I have tried to disable the setting for iTunes from being the default audio player but, it does not work.
    After unchecking the box under:  Edit -> Preferences -> Advanced, clicked OK, closed iTunes and reopened it, the check box for this feature remains checked!
    The older version of iTunes version 10 did work until I upgraded to this version (10.6.3.25).
    I hope someone fixes or has a work around for this soon...It's really an inconvenience!
    Cary

    Hey thanks for replying.
    Here's what I did:
    First I tried the Winsock reset in the Command prompt. Nothing changed.
    Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
    I did the Winsock reset in the Command Prompt again and rebooted my comp.
    Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
    Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
    Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

  • FCP 7.0.3 Easy Setup audio setting issues

    I have created two custom Easy Setups.
    SD:     DVCPro50 PAL with audio set @ 48.000 kHz, 16-bit, 16 chan
    HD:     DVCProHD 1080i 25fps with audio set @ 48.000kHz, 24-bit, 16 chan
    I open FCP, load the SD easy setup.  I then click on Audio/Video settings.
    Select "Audio/Video Settings" and view "Capture Presets Summary"
         - Audio format is listed as 48.000 kHz 16-bit 16-chan
    Select"Edit" and "Capture Preset Editor" comes up.
         - UnderQuicktime Audio Settings:
              - Device:  AJA Kona 3
              - Format:  48.000 kHz 16-bit 16-chan
    If I then select the HD Easy Setup, and then "Audio/Video Settings"
    Select"Edit" and "Capture Preset Editor" comes up.
         - UnderQuicktime Audio Settings:
              - Device:  AJA Kona 3
              - Format:  48.000 kHz 16-bit 16-chan (THIS SHOULD BE 24-bit)
    Select the "A\V Device" tab:
    The audio device has defaulted to the 16 bit setting as well.
    It appears that FCP or AJA is keeping the audio bitrate from the previous Easy Setup.
    Even if we close FCP completely, and reopen into a new project, load the HD Easy Setup, the bit rate still shows as 16.
    I have tried deleting the following:
    apple.finalcutpro.plist
    Final Cut User Data Folder
    Thanks,
    Mike

    The camera definitely recorded in SP, that icon was visible on the viewfinder...
    What settings should i be using in FCP to capture the video? From attempted research i found most comments suggesting to use a basic Firewire settings. i have used this in PAL format but the results are poor.
    One thing I am confused about is the 32khz or 48khz settings. Which should i be using? I have an older version of FCE 4 where there are many settings for both 32khz and 48khz for DV FireWire but in FCP7 there are only options for 48khz.
    Any advice would be welcomed at the moment.
    I am also willing to upload clips of what I have to demonstrate visually the poor quality video I am capturing from the Canon

  • CVP call studio and default audio

    Not sure if this should get posted here or on the development forum but it's getting posted here anyways...
    We have 4 combo boxes in our CVP deployment so we have 4 media servers. I'm trying to figure out what to configure for the Default Audio Path URI in Call Studio when creating a project .It appears that I have to specify either a single media server to pull the audio from or pull it from flash.
    I know our gateways will pull down the wav files from the media servers but if I specify flash in the studio application, do I need to load the wav file directly onto flash on the router or can it access the media servers and pull it down? We run most of our ICM scripts off of microapps, not custom vxml apps. Most of the documentation and the partner class I took doesn't look at multi server deployments and combo boxes like as most standard deployments are like this now. I don'ts ee anything in the Cisco docs for CVP that specify this information. Any help would be appreciated.
    We are using SIP and CSS if that makes a difference.
    ICM 7.5.9
    CVP 7.0.2
    UCM 7.1.3
    thanks
    Paul

    The normal way is to use the VIP you built on your CSS. Let's say this is a.b.c.d and it manages the IP address of the media servers as a "service", providing load balancing and resilience.
    For each application in Studio you should make a matching default audio path and put all the media files under that. Makes it easy - even if there is repetition of system files (1.wav, 2.wav etc). You can control the lifetime (expiration) on IIS more easily.
    Let's assume your application is called "foobar" and your locale is "en-us".
    So set the path to
    http://a.b.c.d/en-us/app/foobar/
    Don't forget the trailing slash. As you go through the Studio program, you just need to specify an audio item as "mywavefile.wav" and that makes it really easy to look at the Prompt Dictionary, as they have simple wav file names and no path information.
    Others may have different views, of course. I'm prepared to vigorously defend mine.
    On IIS you will have wwwroot\en-us\app\foobar with a bunch of files.
    Regards,
    Geoff

  • Changing OSX default volume setting to a higher level in sound preferences

    When I change the default volume setting to a higher level in sound preferences within OSX, it is back at the lower level at the next listening session the following time I use iTunes on my Mac Mini. Within System Preferences there is a section that lets you "choose a device for sound output" but the only choice I have is "line-out" and under the "port" heading there is only "built-in output"--no other choices are shown. I have external speakers attached which I like to use for listening to music as I work. What is the problem? Why won't the higher volume I set remain? Also, shouldn't more than one choice be shown for sound output?

    This sounds like the problem that I'm experiencing and <a href-"http://discussions.apple.com/message.jspa?messageID=2694517#2694517">aske d about a couple of days ago. The sound level resets to 50% after shutdown.
    I tried setting the levels in Audio MIDI Set Up as suggested above, but that hasn't changed anything.
    In answer to B_web, I am running my external speakers through the headphone jack.
    So, any other suggestions?

  • Lacking sufficent privilges to make ITUNES the default Audio player.

    Never had any problems until updating to this latest version of ITUNES but it now gives me the "you lack sufficent privilages" message whenever I try to set ITUNES as the default player for audio files in preferances.
    I've set my permissions on MY DOCUMENTS/MY MUSIC and all sub-folders/files to full control for everyone and yet this problem persists.
    I have went into program access control and set ITUNES as default and it acts like it is setting it as default but when I open ITUNES it asks me if I want to set it to default player I check yes and it promply tells me I lack sufficent privilages to do so.
    I am of coure running as an ADMIN account.
    I am running XP PRO with all latest updates and patches
    SPYBOT S&D
    SpywareBlaster
    AVG anti-virus
    AD-AWARE SE
    COMODO Firewall
    I have tried changing things with all of the above security items turned off on 2 differant ADMIN level accounts and the result is the same...no joy
    My computer has Two ADMIN level accounts on it and a VISITOR account with limited privilages...could the limited Privilage account be causing a problem as it was added after my original install of ITUNEs (version 6.whatever) and was already installed on the computer when I installed the current upgraded version.
    Since ITUNES installs it's startup ICON in the ALL/USERS folder could the fact that the one account has limited privilages prevent allowing the change to be made on all accounts??
    If anyone has the solution please respond...this version should be called LOONEYTUNES cause that is where it is driving me!!

    It makes and keeps all the changes I make in preferances with the exception of making ITUNES the default audio player. The only solution or work around has been to go and right click on say a MP3 file select file/open with/select ITUNES check the box always open with this program box and then it will open the Mp3 files with ITUNES.
    It kinda gets what I want done I suppose, but I, like the Dyson vacuum guy on TV believe things "should work as they as supposed to".
    As yet ITUNES Ver.7 has been a disappointment, as long as windows XP has been around and as widspread as the usage of ITUNES is on windows platrom machines, IMHO there is no excuse for these kind of compatability issues.

  • Default Audio Player  Error - Is there a solution?!

    Hi,
    I've been checking in for quite some time to determine if there has a been a solid solution to the inability for some ppl to make iTunes the default audio player in Windows. Here's the exact issue error:
    On opening iTunes the following prompt appears:
    "iTunes has detected that it is not the default audio player for audio files. Do you want to make iTunes the default player for audio files?"
    Selecting "Yes" prompts the following error panel:
    "An error occurred while updating the default player for audio file types. You do not have enough access privileges for this operation."
    Here's some of the responses I've seen to this problem and my personal answers.
    1. Do you have full admin privleges? Yes.
    2. Do you have MS Antispyware disabled? Yes. It's actually not even installed.
    3. Do you have other virus protection software (Norton, McAfee, etc.) disabled when installing iTunes? Yes.
    4. Did you make iTunes the default player in the Control Panel "Set Program Access and Defaults"? Did you reboot? Yes.
    5. Do you have full write privileges to your "My Documents" folder or your iTunes music folder location? Yes.
    I've scoured the net and tried everything. So far I'm yet to see a concrete solution though I have seen many ppl complain about the issue. Anyone know of a solid fix or if Apple has addressed this? It's only with 6.x that this issue has popped up.
    I'd REALLY appreciate any insight (as it seems many others would as well).
    Thanks,
    Devin
    AMD Windows XP Pro SP2
    AMD   Windows XP Pro   SP2

    Thought I'd bump this one time since my original post was over the weekend and there hasn't been any response. Thanks.

  • CVP Default Audio Path

    CVP 4.0.1 Sr1
    All my media files are in C:\Inetpub\wwwroot\en-us\app location.
    On Studio - Project Properties - Audio Settings - Def Audio PAth URI - I specify the path as:
    http://10.1.17.18/en-us/app/
    My question is there a way to provide two locations here - as I have two servers?
    And if yes - will it be primary & backup or Round Robin?
    What is the best practice recommendation to point the def audio path settings if you have two servers?

    Another technique is one that I have used in the absence of a CSS.
    Can you code Java? I wrote a Java custom action element that is the first element in the application. It uses HTTP to fetch a small test.htm file located at the root of each web server. The settings have the IP addresses of the two Media Stores configured.
    If I can fetch the file from the first, then that defines a session variable that is used throughout. If not, the second IP address defines the session variable. When I deploy the app to one VXML server, the first setting is the Media Store on that side; when I deploy to the VXML server on the other side I favour the Media Store on that side. The idea is that if the side is up, the Media Store is likely to be up - rather than fetching from the Media Store at the other side. But if for some reason the Media Store there is down, the app will tell the gateway to use the other Media Store.
    The applications are long, self-service apps so the small hit at the start to fetch the tiny HTML file is negligable.
    The default audio path is not used - each audio element spec is full path to a WAV file made up of a combination of session variables.
    Not as good as a CSS, but workable.
    Regards,
    Geoff

  • MOTU 828Mk3 & Logic Pro's default audio outputs

    Hello people! Well, I received my MOTU 828Mk3 a couple of days ago and am very pleased with it so far, sonically much better than the Mk2 however I'm slightly frustrated with the default audio out in logic pro. The 828 is set-up fine with the default audio out set to master out, itunes etc all work fine but within logic pro the default output is analog 1-2, the master outputs are 9-10. So every-time I create a new project I have to select 9-10 as the output, I can live with that but if you drag any samples/loops into a project the output of the new track defaults to analog 1-2, bit of a pain. So my question is - Is there any way you can tell logic to use a default pair of outputs?
    Cheers
    Paul

    You should be able to set the main outputs to be 1 and 2 in the MOTU setup app. I've done that with my 896mk3 and it works as expected. It just means that the outputs 1-8 on the unit are actually 3-10 in Logic.

  • Udev default audio device

    I recently picked up a new usb mic - the problem being that now whenever I boot with it turned on, udev sets it as the default audio device.  From what I remember with the whole switch from devfs to udev, one could manually specify various things.  So, is there a way in the udev.rules to say that I want my actual soundcard as the default device, and device 'AK5370' as audio device 1?
    Thanks.

    thanks!
    I ended up doing
    options snd-usb-audio index=1
    for some reason the snd-hda-intel one would just make the soundcard not show up at all, even on
    options snd-hda-intel index=0
    but it worked, and thats all that matters.

  • Can't Reset Default Audio Transition

    My default audio transition (cross fade) has been replaced by "None" and I can't select "Set Default" to reset it. I've tried manually applying the transition then selecting it but "Set Default" is still grayed out. I first noticed the problem when the shortcut optioncommandT stopped working.
    This has been driving me nuts for a while now I'm hoping someone can tell me how the default could get deleted and how to reset it.
    I'm running FCP 5.04 on a Dual 2GHz G5 PowerPC.
    Thanks,
    Shelby

    I still don't know if this can be done from the Effects drop down menu but I was able to reset the default in the Effects tab in the Browser window, which I rarely use.
    Thanks.

  • Making itunes default audio player

    my XP account is set with admin privilages.
    When start itunes under my account, I get message saying itunes has detected not default audio player and asks if I want to make it such.
    When answer yes, I get message saying I don't have enough access privaleges for that operation.
    What privaleges does one need to do this?

    hi y'all!
    what happens if you go into the "set program defaults" area of your Add/Remove Software, and toggle the default media player settings in there a few times?
    (i'm not sure if this actually works, but i keep suggesting it to people and the threads keep going silent ... so i figure it might be worth a shot.)
    love, b

Maybe you are looking for

  • Execution of SQL Query to slow

    Hey all!!! I'm using 10g express edition with apex 3.1, when I run this query: select asig.idasig IDASIG, asig.idAsig "Código Asignatura", asig.idasig ID,substr(asig.codigoasig||' '||asig.nombre,0,40) "Asignatura", p.nombre||' '||p.apellidos "Respons

  • Brand new, seeking advice

    Hello everyone,l have been lurking on these boards for the past two months or so, taking as much advice as I could find. After several years of not caring about my future or my credit score I have recently decided to take charge of my life. In the pa

  • Update iOS without iTunes.

    I have a problem with network connection so i got my iPod touch-4 Gen failed to update to iOS-5. Is that any other way to update without download it direct from iTunes? i have tried to download the IPSW restore file with my Download Manager  and hold

  • Camera screen black, touchscreen buttons mostly unresponsive, though screenshots work

    My camera screen is black/blank and the touchscreen buttons on it are not responding or very temperamental.  Screenshots work.  I can only very occasionally view the camera roll through 'camera'.  This has happened before when storage full but I alwa

  • Help!!!..I am getting error message PGC

    I am getting really short on time and i need to get this project burnt yesterday (isnt that always the case). Ok here's my issue...I have edited footage in Pro, and built menu in Encore, brought footage in, checked for problems, None..OK.. Now when t