Default Behavior for AutoRun not configurable in GPMC

I am not able to configure the Default AutoRun Behavior in my GPMC. It is grayed out for some reason (see below). Any ideas??
Charlie Newman

I would like to know why at some point. This makes me wonder if there are other things that don't work so well with RSAT GPMC. Perhaps one of those Microsoft-isms. :)
Charlie Newman

Similar Messages

Trying to add another DB under SCAN via DBCA "Default listener LISTENER is not Configured in the grid infrastructure home"

Trying to install another DB under RAC using SCAN listener on a new port. DBCA gives error "Default listener LISTENER is not Configured in the grid infrasturcture home".
Have tried srvctl config listener, srvctl start listener to start the listener. Still not able to get past the DBCA error. What am I missing? Do not want to start LISTENER on port 1521 as SCAN is running on 1521.

No your Database config does use hostname/ip + port or a tns-entry pointing to the local_listener. Neither method does care for the home the listener is running from.
You will however have to take care of the entries in the clusterware, as the listener is a controlled resource. If you manually relocate it, then it will only work until next restart of crs stack.
The simplest way to switch the home is by running first netca from database home and delete the listener and then switch to grid home run netca again and create the listener.
netca will take care of registering it with crs with the correct environment settings. You will have a short period where your rac won't have a listener and therefore won't accept new connections until the new listener is up and running.
Relocating the current listener requires to modify several parameters via crsctl in the cluster registry, but allows doing this node by node without complete outage.
If you want to go that way, then create another listener from grid home and compare the settings of current listener and of the new listener. You will need to update several parameter before you can relocate it.
Run this command to show the current settings and compare it to the listener from grid home:
crsctl stat res ora.LISTENER.lsnr -p
You will need to modify serveral parameters, ACTION_SCRIPT,AGENT_FILENAME,ALIAS_NAME,ORACLE_HOME and the ACL
Modify works like this, for ACL you must use the encasing single apostrophe ' and run it as root:
crsctl modify res ora.LISTENER.lsnr -attr "ACL='owner:oracle:rwx,pgrp:oinstall:rwx,other::r--'"
I would recommend Version 1 if short outage is acceptable. For both variants verify that you can resolve all tnsnames entries in both homes.
Regards
Thomas

Convergence - default behavior for deleting messages

How do you set the default behavior for deleting messages in Convergence to move to Trash instead of marking as deleted?

jessethompson wrote:
I deleted the nswmExtendedUserPrefs attribute completely on a test account. Then I logged in to Convergence with that account. I went to Options -> Mail -> General and confirmed that "Mark messages as deleted" is selected. I went back and checked the nswmExtendedUserPrefs, and they remain empty.It appears Convergence will not propagate nswmExtendedUserPrefs values if the system folders already exist. So if you log into Convergence for the first time (nswmExtendedUserPrefs unset) but you already have "INBOX" / "Trash" / "Sent" and "Drafts" folders created on the IMAP server (e.g. you had previously accessed the account using an IMAP client which had created the folders) the matching nswmExtendedUserPrefs: values won't get added.
Specifically, the default behavior of this option is the opposite of ME. Should I open a Sun call to file an RFE to have this default setting changed back to the way it was?I've created a bug for this behaviour as it is inconsistent with UWC/CE behaviour and can lead to confusing default behaviour:
bug #6862511 - "Convergence doesn't set defaults for nswmExtendedUserPrefs if system folders already exist"
Raise a support case to get this bug escalated.
Regards,
Shane.

Default them for Mac not working firefox 4 beta 1

Default them for Mac not working Firefox 4 beta 1
== This happened ==
Every time Firefox opened
== I first opend FF4 beta 1 for the first time

'''Ritrup''':
Create a new profile as a test to check if your current profile is causing the problems
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

It should be possible to set default behavior for all file types

It should be possible to set a default action for all file types. I'm so tired of having to manually sit and say "save this file" because Firefail always defaults to "open with" and has disabled the "Do this automatically for files like this from now on."
And spare me the zealotry religious excuses for why its the fault of websites and not Firefail
''edited to remove swearing''

I do want users to have full control to be able to set any folder view they want by using Apply to Folders; I just want to set the initial/default view to Detail because that matches what the majority of my users want.
That is, what registry setting changes when I go to a picture folder, change the view to Detail, and click Apply to Folders? Having done that, I still retain the ability to change it to some other view and apply that to folders. But what registry setting
represents the change I just made when applying Detail view to all Picture folders.?
This settings is simple via GUI, but it is related a lot of registry keys, I made a test in my machine, capture the "Apply to Folders" process using Regshot tool (this is a small tool which can compare the regsitry changes after you change some
settings), and this is the result:
this is part of the registry changes, a plenty of registry keys and values need to be changed. hard to list them here. if you have interests, I recommend the tool Regshot, it can help you capture the regsitry changes.
NOTE: Please Note: The third-party product discussed here is manufactured by a company that is
independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's
performance or reliability.
Yolanda Zhu
TechNet Community Support

Routers default behavior for mulitcast traffic

Hello,
What is router's default behavior (without enabling multicasting) for multicast traffic? Does it drop or look routing table and forward it?

Traditional IP communication allows a host to send packets to a single host (unicast transmission) or to all hosts (broadcast transmission). IP multicast provides a third scheme, allowing a host to send packets to a subset of all hosts (group transmission). These hosts are known as group members.

How can I change the default behavior for ctrl-Tab?

I tried to change the behavior of ctrl-Tab from 'Next Tab' to 'Previous Tab' and added 'alt-Tab' for 'Next Tab' in Keyconfig so I can navigate in both directions with one hand. It does not change the behavior of ctrl-Tab.
I created both these shortcuts in Keyconfig:
Next Tab
gBrowser.mTabContainer.advanceSelectedTab(1,true);
Previous Tab
gBrowser.mTabContainer.advanceSelectedTab(-1,true);
I even tried doing this from the command line with the same result:
defaults write org.mozilla.firefox NSUserKeyEquivalents -dict-add "Next Tab" "~Tab"
defaults write org.mozilla.firefox NSUserKeyEquivalents -dict-add "Previous Tab" "^Tab"
I'm not sure why this didn't work but maybe "Tab" is the wrong keyword. I couldn't find any documentation on what it should be. Or possibly "Next Tab" and "Previous Tab" don't work in this case because they are not 'built-in' commands. A third possibility is that it won't work because ctrl-Tab is a built-in shortcut but I can't believe that is why. I was able to change cmd-Q to ^-cmd-Q no problem and that is a default OS X shortcut. I was also able to change other built-in functions' shortcuts, just not this one.
So what am I doing wrong? Has anybody been able to change this particular shortcut?

OK I posted a link to this thread on that forum thread but I still think this is general enough that it could be answered in this forum.

Changing the default address for Iphone Notes?

I don't why this is but the e-mail address is my gmail account. When it should be to one of my Outlook addresses. Which is why my notes to to Gmail notes, I suppose.
No matter how hard I search, I can find no way of changing the default address from my gmail to my Outlook addresses.
Can someone advise, please?
Thanks
ron

Accessing 'Library' is a little like 'killing a cat' in that there are many ways to achieve a result.
It should be noted the expression is colloquial, I do not go around "killing' anything.
Those who need frequent access to the Library may consider accessing the Library and having done so drag the Folder to Finder's Side Bar.
In future they are then one click away from direct access to their Library.
Apple seem to be insensitive to the results of their confusing naming, especially when access may be infrequent?
Calling one of the Libraries e.g., LibraryX may be sufficient to indicate to most users that it is somewhere they should not be venturing?
Setting a up a 'second' [in name at least] App Store frankly beggars belief.
It may well be the policy to be working toward a device wide OS with everything ultimately available from iTunes? In the interim it would be useful to differentiate between Mac Applications and iOS Apps without folk having to add their own expression in the interests of clarity.
Sorry to wander off topic but, IMO, this is another example of flawed thinking.

Change default behavior for opening external links

Is there a Robohelp setting I can change so that, by default, external links in WebHelp open in a new tab or browser?

Hi there
Unfortunately there never has been to my knowledge.
You may wish to make the suggestion so a future version can have it. (Link is in my sig)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

JTree Default Behavior for Keyboard events

Hi guys,
I'm dealing with the same problem posted on
http://forum.java.sun.com/thread.jspa?forumID=257&threadID=520263
Any Help ?
Cheers,
Rawad

Hi,
We are aware of this issue and are looking to fix it in a future release.
Kind regards,
Lea

Default behavior of numeric datatype

Discoverer 10g Rel.2: 10g BI Tool
The default behavior for numerics in Discoverer appears to require that you choose sum, count, etc when creating a workbook. Our data is mostly numeric codes, some of which would obviously be innapropriate to do calculation on. How do I over-ride this default behavior? I cannot see in the administrator tool where it allows me, under properties, to modify this. TIA.

Hi TIA
You go to the Properties of the item in Discoverer Administrator. If you look down the list, about one third of the way down, you will see a property called Default Position. This is the property that determines whether an item is used in calculations or not.
The default setting for numbers is Data Point. Changing this from this to any of the other settings will stop the calculation behavior. The one I would use is Top or Side.
By the way, this setting determines which axis the item will be placed on by default. In Discoverer there are four axes:
1. Data Points - these are the items that will be used in calculations
2. Side - on the side of a Crosstab, otherwise on the top
3. Top - on the top of a table or crosstab
4. Page - in page items
Hope this helps
Best wishes
Michael

Printer for delivery note

Hi ,
How to set default printer for delivery note...
Prashanth

Hi There,
Do this by printer configuration in the spool.
Go to T-Code SP01,
Execute the spool request,
Then select the required spool and change the printer name in the option 'Print with changes parameters' from the menu option spool request.
Thanks,
Raja

Printer not configured at Invoice level (vf02) - Jetforms

Hi all,
Here i need to trigger an output for an Invoice for a particular printer, but when i checked at VF02, i found printer looking for was not configured !!
And this invoice is maintained through Jetforms, so it needs to check at Jetform server level, i guess
So anyone could please suggest me, how to get print of Invoice for the required printer
Thanks in advance

Hi,
If printer / device is not configured at application level i.e. VF02, we can make replica of that printer at Jetform server level.
So first trigger the print through an available printer, now access to Jetform server, there you will find the related spool, just copy that file to desktop with name change.
And now when you open the spool, you'll find the Job name follows with the printer name, here you replace the existing printer name with the current printer name, which you're looking for.
Copy the file to DATA folder, hence automatically it triggers the print from the required printer, job is done !!
Let me know for any concerns.

What should the"default behavior" be for WiFi network connections?

I Have been able to at least temporarily fix the plethora of problems encountered after downloading Mountain Lion to my 2009 17" MBP just ten days ago. Thanks to the time and effort of so many posters that are much more savvy than me, I successfully executed the steps suggested in many of the posts and with good results. It surely beats running down to the Apple store and being told that I am the only one with a problem.
Okay, I've realized that I don't really know what the default behavior of the WiFi network connection should be?
Specifically:
Should the Wi-Fi drop down in Network always be" looking for networks", even though I am obviously on my Network?
Should the Wi-Fi be connected at all times even when your computer is in sleep mode- or deep sleep mode? There have been so many problems with Wi-Fi dropping off,slow or hanging loads, etc.
I unchecked "ask to join networks, in Network preferences thinking it might stop looking for networks when it doesn't need to because I'm already on mine. I do see my neighbors (four neighbors) in the drop down in Network.
How do you get into Time Capsule's settings, to check speeds, especially ping? What should the ideal settings be?
How do you know if your DHCP license is renewed? I've heard that feature isn't working and may be the culprit to some of the Wi-Fi problems.
I'll look forward to your help in understanding more about this. I've been in the support area a lot lately, I've read plenty of definitions, and explanations of the different options to choose from in Apple's support area, but nowhere have I seen anything that explains what the default behavior should be or perform like.
Thanks, as always.

Generally, you don't want to tweak the wifi settings. It pretty much takes care of itself. The caveat to that is, of course, if you're experiencing problems.
The 'looking for networks' behaviour only happens when you log in, wake the mac from sleep OR when you click on the wifi icon. You clicking on it tells the mac "I want to see what networks are available" - so it does a scan for you to check to see if any new networks have appeared since you last clicked on it (or woke/logged in). In short, if you don't want it to look for new networks, don't click on the icon!
Unchecking the 'ask to join networks' option only applies when your mac detects a new network (such as when it wakes) that you haven't already authorised; it'll ask you to confirm whether you want to join it or not. Otherwise, if the network is open it'll join automatically. You should keep this selected if you travel around with your Mac. It's a good idea to know what network you're on before you start plugging in passwords or typing other things into the mac.
There is a utility that you can use for ping and traceroute called 'Network Utility'. Click on the Spotlight icon in the top right of your screen and type "Network' and you should see it at the top of the list. Hit 'return' to open it.
DHCP licences are normally renewed automatically by your router every 24 hours. Again, there's no reason to be messing about with that unless you're experiencing problems.
If you're experiencing wifi dropout, let us know, and we'll make some suggestions, but if you're not, you're best leaving your mac to manage the background processes. It knows what it's doing!
Message was edited by: softwater

Configuring Kodo default implementation for field of Collection type

If I am not mistaken default implementation for field of Collection type in
Kodo is
LinkedList based proxy. It would be great if it were possible to configure
Kodo to use a proxy of my choosing
I did some tests and it seems to me that ArrayList is much more efficient
than Linked list (see below)
Is there any specific reason I am not aware of that makes LinkedList better
than array list
In my applications all collections a relatively small (or at least most of
my collections are definitely small)
and since I use Collection interface there is no inserts into middle of my
collections - only appends (which ArrayList handles very well)
So my question is can I make Kodo to use ArrayListProxy for fields of
Collection type
(except of course using ArrayList field instead of Collection which I do not
want to do)
below is some statistics on collection performance (populating and iterating
collections)
the same test against 3 collections implementations (JDK 1.4.1)
Not only ArrayList by far the fastest and memory friendly it also garbage
collected much sooner and better -
I show here max memory consumption and last to would not be garbage
collected till all memory is in use (old generation GC)
and ArrayList seems to be collected by young gen GC because it was collected
very quickly between test cycles why other only when all memory was used
So please make ArrayList your default collection implementation :-)
Small collection size (40)
time(ms) memory(kb)
ArrayList 5,218 62,154
LinkedList 14,125 240,066
HashSet 27,000 311,825
the same but using using random inserts - append(index, object) rather than
append(object):
ArrayList 8937, 53591
LinkedList 15047, 240066
Larger collection size (200)
ArrayList 4860, 47709
LinkedList 18468, 290704
HashSet 34391, 422282
the same but using using random inserts - append(index, object) rather than
append(object):
ArrayList 11844, 47709
LinkedList 25766, 290704

You should be able to accomplish this fairly easily by extending
SimpleProxyManager:
http://solarmetric.com/Software/Documentation/2.4.3/docs/javadoc/com/solarmetric/kodo/util/SimpleProxyManager.html
and overriding the appropriate methods (getCollectionCopy and
getCollectionProxy).
On Mon, 12 May 2003 12:26:21 -0400, Alex Roytman wrote:
If I am not mistaken default implementation for field of Collection type in
Kodo is
LinkedList based proxy. It would be great if it were possible to configure
Kodo to use a proxy of my choosing
I did some tests and it seems to me that ArrayList is much more efficient
than Linked list (see below)
Is there any specific reason I am not aware of that makes LinkedList better
than array list
In my applications all collections a relatively small (or at least most of
my collections are definitely small)
and since I use Collection interface there is no inserts into middle of my
collections - only appends (which ArrayList handles very well)
So my question is can I make Kodo to use ArrayListProxy for fields of
Collection type
(except of course using ArrayList field instead of Collection which I do not
want to do)
below is some statistics on collection performance (populating and iterating
collections)
the same test against 3 collections implementations (JDK 1.4.1)
Not only ArrayList by far the fastest and memory friendly it also garbage
collected much sooner and better -
I show here max memory consumption and last to would not be garbage
collected till all memory is in use (old generation GC)
and ArrayList seems to be collected by young gen GC because it was collected
very quickly between test cycles why other only when all memory was used
So please make ArrayList your default collection implementation :-)
Small collection size (40)
time(ms) memory(kb)
ArrayList 5,218 62,154
LinkedList 14,125 240,066
HashSet 27,000 311,825
the same but using using random inserts - append(index, object) rather than
append(object):
ArrayList 8937, 53591
LinkedList 15047, 240066
Larger collection size (200)
ArrayList 4860, 47709
LinkedList 18468, 290704
HashSet 34391, 422282
the same but using using random inserts - append(index, object) rather than
append(object):
ArrayList 11844, 47709
LinkedList 25766, 290704

Default Behavior for AutoRun not configurable in GPMC

Similar Messages

Maybe you are looking for