Default Bios Settings for RS480MS-IL2

Hi all
I am just wondering if there is some hidden key that loads some Default Bios Settings for this board? I know there is an Optimized Settings option, but i haven't seen a Default one.
I am using version bios version 3.8
Thanks.

have you tried a better psu
a 128 mb ram consumes around around 8 to 10 watts
http://www.blueowltechnologies.com/pmConsumption.asp
volts x amps =watts
3.3v feeds ram
so at most you have 46 watts on a good day

Similar Messages

Request for proper BIOS settings for MSI "KM4M-V" VIA KM400

Hello,
I tried to search on this problem but with no success. I have a computer that I had to reset the bios and I'm trying to get the clock speed adjusted to the processor chip. Here is my setup:
MB = MSI "KM4M-V" VIA KM400 (MS-7061)
CPU = AMD ATHLON XP 3000 "Barton" 333 FSB OPN - AXDA3000DKV4D
Here is my problem, when I boot up the cpu shows the clock speed of 1.733 GHZ with default BIOS settings.(it shows this speed in windows when booted up also) When I try to go into the BIOS and change any of the speed settings under Advance Chipset Features, the cpu will reboot and loose video until I reset the BIOS with the jumper.
I was wondering if someone had a setup like this and could give me info on what settings are the RIGHT ones to get the AMD XP 3000 up to speed? ;-)
Any help would be greatly appreciated!!!

Quote
Did a search on the form and looked thru that posting guide with no results.
Read >>Posting Guide<< and provide full system specification.
Quote
how do you find CPU OPN code?
Look over CPU itself:

How to configure default parental settings for all users (10.7)?

Hello,
I've made a silent installation of iTunes using MSI files and it works well.
I need to enable parental controls and configure it. Users must be preventing of changing these settings.
At the end of the iTunes installation I automatically created registry keys :
[HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls]
"AdminFlags"=dword:001b7ac5
"AdminMoviesLimit"=dword:000000c8
"AdminTVShowsLimit"=dword:000001f4
"AdminRatingSystemID"=dword:0000000b
"AdminGamesLimit"=dword:0000012c
According to http://support.apple.com/kb/HT2102 it is the procedure to set default parental settings for all users and to lock these settings.
When iTunes is first launched, parental settings are not set nor locked.
I use iTunes 64 bits on Windows 7 64 bits.
Where is the mistake?
Thanks in advance.

You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

Change the default margin settings for the MS word!

Hi All,
BI Publisher version:latest 10.1.3.4
DB:10.2.0.4
Oracle Apps:12.0.6
OS:AIX
We are facing an issue of which description is as below:
RTF output is being uploaded through "XML Publisher" Responsibility.
3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
Expected output:
So what we need to do is -
1. Check the MS word installation on the application server
2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
Could anyone please share such an issue faced before!
Thanks for your time!
Regards,

Hi All,
Moreover,
Our understanding about the RTF output is this -
When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
So what you could help us with is this -
1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
2. Change the default margin settings for the MS word.
Regards,

Suggested K8T Neo BIOS settings for CL 3 Kingston Value RAM

G'evening!
I'll be putting together a system with the Athlon 64 3000 and K8T Neo board and had a question about optimal BIOS settings for paired Kingston non-ECC DDR 3200 RAM (2x512mb) that's CAS 3. Should have gotten some CAS 2.5 probably but this is what I have for now so in it goes. I'm reading the quick users guide and noticed that you can manipulate the CAS, TCRD, TRAS, and TRP.
First question: Will the board's auto detect do a good job in picking out a stable configuration?
2nd question: If you had to or wanted to make manual settings, what would you suggest? The CAS value is rather easy since I guess it should be set to 3 but what settings would one pick for the others?
And if I still have your attention...
The other things that will be going in the system are the infamous Maxtor 120 gig SATA HD, a XFX 5900FX video card, Lite-On combo burner. Powersupply is an Antec Solution Series 400W PS. After reading the forums for a bit I get the impression that you shouldn't forget to load the SATA Promise drivers so the HD will get recognized. My SATA drive will be the only drive in the system and will of course be the boot drive. Any other possible pitfalls or problems I should know about with the Maxtor SATA's and the K8T Neo board?
Also, I had thought I read from a review that the Zalman Al-Cu CPU heatsink/fan will fit on this board. Of course after seeing it in my hands for the first time I thought that it was a pretty damn big heatsink. Anyone else using this heatsink? (haven't taken it out of the packaging yet so that's why I wanted some impressions).
Thanks for any advice you can give me. It's been a bit of time since I built a computer and I'm sure there's alot of basic things I'm relearning along with the fact that the Athlon 64 is fairly new technology. On the other hand, when it's running smoothly...

Cant offer anything on the Timing, (sorry as I am Intel Fodder ), But I can assure you that the Zalman 7000-AlCu, Will Indeed Fit onto your Motherboard (With Room To Spare!) :biggthumbsup:I can attest to this because My buddy just installed the Zalman 7000-AlCu on his K8T ....And He loves it! As do I ....It's about the only thing that we have in common as far as PC'S Go .........Sean REILLY875

Best BIOS settings for Kt3 Ultra2 and Geforce4?

Hi,
Can someone tell me what the best BIOS settings would be for my KT3 Ultra2 running a Geforce4 ti4200?
I get crappy scores in 3dMark2001 SE and I have the infamous stuttering/crashing problems in 3D games. I've tried pretty much every configuration of settings and drivers I can think of.
I saw on these forums that the Kt3 Ultra2 can be a bit fussy with GF4 cards. If someone could post the best BIOS settings for performance and stability I'd be eternally grateful.
Alternatively, email me at [email protected] with them.
Thanks in advance

very very similar as far as i can make out

Bios Settings for 785GT-E63

Where can I find BIOS settings for the 785GT-E63 that will give me the most optimum performance for my system? My system consists of:
Nvidia GeForce 7300GT graphics card-256MB memory
G.Skill-4GB DDR2 PC2-6400 Memory
Phenom X3 8600-2.3 GHZ
Coolermaster case with 2-120MM fans
Coolermaster 500 watt PSU
Stock cpu cooling fan
Can someone tell me what I need to do to optimize this system? Would like to buy another CPU, but not sure if I am getting the most out of this one. Help!!

Quote
Would like to buy another CPU, but not sure if I am getting the most out of this one.
How do you mean? If your CPU is correctly recognised, and operates at its native speed of 2.3ghz, then you're getting the most out of it.
Does your system work without issues? Does it do everything you require of it, and do it well?
If yes, and yes, then stop fretting and enjoy your system, instead of trying to look for problems that aren't there.
Of course, if you want to try and push your system further, then you'll have to start overclocking. But we have a whole seperate area for that here, and you should post your questions there.

Bios Settings For MSI K8N Neo4/SLI Platinum MB

Hello all... Has anyone came up with the best and most stable bios settings for the MSI K8N Neo4/SLI Platinum motherboard yet. Specifically under the CPU and Memory menus.
If anyone has seen any, please post them. or post a link.
Thanks
DaaDoctor

Well that depends on the installed CPU and memory, doesnt it? So I find that question kinda odd.
One thing though: Dont use Cool n Quiet.

BIOS not detecting notebook hard drive after setting default BIOS settings.

I had my Ubuntu 14.04 installed in my laptop in a drive named "Notebook hard drive" in addition to a pre-installed Windows 8. Today I set the default BIOS settings in my laptop and when I rebooted it and tried to use Ubuntu by pressing "F9" key and choosing from the BIOS menu I found my "Notbook hard drive" option missing. My Ubuntu drive is still there but I have no way to access it. Is there any way I can get it back to working?
This question was solved.
View Solution.

Try disabling secure boot in the BIOS and then restarting the notebook.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to restore default BIOS settings on Toshiba 1410 / 1415 / 2410 laptops? Option to CHGBIOSA?

I have problems booting to any operating system but DOS on Toshiba Satellite 1410 (in very good physical condition) after few years of inactivity (drained down main battery and CMOS battery - now they're charged)
Windows stops with BSOD (error 0x0000008e), Linux stops with kernel panic, bad_area_nosemaphore and IRQ error.
Plain MS-DOS 7.10 seems to run OK.
BIOS was 1.40 with main password set. After first boot it displayed request for entering password and pressing F1 key to set the hardware clock. Now it doesn't display this message anymore.
Two memory modules (Nanya - 256 MB, 266 MHz, CL 2,5) are OK - checked on different versions of MemTest86+
(Windows Memory Diagnostic Tool hangs when starting!)
I dismantled laptop and cleaned very small amount of dust inside with compressed air. Changed thermal paste on the processor (Celeron M 1,8) and bridge. Turned laptop on with extension cards, battery and disk and without them also.
It didn't help.
I flashed the CMOS with BIOS 1.20, 1.30 and 1.40 back again. None of the versions didn't let booting neither Windows nor Linux.
MS-DOS, PC-DOS, FreeDOS still run OK.
What's more interesting - after flashing procedure all BIOS settings were intact (booting priority, battery saving mode, etc.). And yes - I removed the password before flashing!
I was suspicious about problems occuring when laptop was entering 32-bit mode and checked it with Video Memory Stress Test.
When CMOS was flashed with 1.20 BIOS above test was running flawlessly. However, with 1.30 and 1.40 version it stopped >>Unhandled Exceptopn "Access Denied"<< in 8th iteration when lucky. Most of the time it stopped after 2nd or 3rd iteration after framebuffer subtest.
So my question are:
- did CMOS lost its settings or somehow they were corrupted after long period of laptop's inactivity?
- is Video extension of this BIOS flashable?
- why the settings are NOT restored to defaults after each CMOS flashing?
- or maybe there is some hidden switch/option to CHGBIOSA flasher to reset non-flashable CMOS area?
- or is my built-in Video Card (nVidia NV17M) or IRQ enumerator dead?

Hi Jerry! I think I'm on board now, anyway I hope so. I removed both devices and switched them around. The device manager shows two USB devices. One is Mass Storage and one is Composite. I don't realy know which one is the 1TB and which one is the 16 GB. In my boot menu, it just says USB now?? My laptop only has three USB ports. Two on the right and One on the left. I have a wireless mouse plugged in one of the ports on the right as you can see in device manager. I hope this is what you were asking. I can be a little thick headed at times, so let me know what else you want me to try Thank you for your kind reply. It really means a lot to me.
Dokie!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture40.JPG ‏202 KB
Capture41.JPG ‏137 KB

Ideal BIOS Settings for online gaming

this is my 1st computer that i built. i have a lot of experience in wiring high-end electronics, so wiring this little rig with barely any visible wires/cables was a breeze. I bought the processor/mobo with the intention of only doing minor O/C as i dont really know all that much on the hardware side of improving performance. with that said, i've searched for timings and settings for my specific combination, and i cant find any. again, i dont really want to push the config past a safe level, as i will be selling this machine when the 64's come down in price. can someone help me set the proper frequencies/timings? i have a lot to learn, and even in the normal bios settings i don't know if certain things should be enabled or disabled for my main purpose, which is to simply play 3D online games very fast. i will be changing out the GeforceFX5200 PCI for a 5600 AGP in a week or so. I'm noticing that my old Comcrap PIII 1.0Ghz w/512SDRAM with this video card gets just as good a ping ingame as this rig does. the machine starts quickly, runs offline programs quickly, but online it isnt as fast as i'd hoped. from what i've read in the other forums, there are many settings in the bios that are enabled by default that don't need to be. can someone help me decipher which settings are useful and which are not. i loosely understand some of the settings but if someone could help with the questions below and/or do a walkthru for bios geared toward gaming i'd really appreciate it. The machine runs very cool (CPU 104*F/SYS 93*F) but i dont know what else needs adjustment. I simply want to make this machine go as fast and as hard as it can with the right config. i don't want to unlock the processor yet or do anything else major at this point.
1: Best yet safe Voltage for my processor and RAM
2: FSB clock; 133 or 166? had problems @ 200
3: S.M.A.R.T. on or off?
4: Best IRQ/PCI slot for video card
5: "GoodMEM" utility: how much should i safely allot?
6: Video BIOS Cacheable?
7: Multiplier setting for K7N2DeltaL & XP2600+
8: VGA Aperture (my card is 128MB but PCI. upgrading soon)
i'll be learning more as i go along, so i dont really need a full explanation of what's what, lol THIS TIME. all i need is a rundown where someone tells me what to leave alone, and what to change for a very fast yet safe gaming rig

OK I'm officially confused.
I bought the retail boxed AthlonXP2600+, which clearly states on the packaging "With 333 MHZ Frontside Bus". i bought the board over others, one reason being it supported 400MHz FSB. I go into "Advanced Chipset Features" and when i set the "System Performance" to "Manual", i can then go into the "CPU FSB Clock" settings, but the max it will allow me to go to is 233MHz (which won't boot and i have to flip the jumpers. when i had set it to 200MHz before, it failed to boot as well... PLEASE can someone look over these settings and tell me the OPTIMAL settings for taking this combo as fast as it can go w/o overclocking? What am i doing wrong? what multiplier do i need to be at. I'm under the impression that the combo works best when the clock speed of the board is at the same speed as the processor. here are the BIOS settings with which i need advice:
ADV. BIOS
Virus Warning [Disabled]
External Cache [Enabled]
Quick Boot [Enabled]
1st Boot [Floppy]
2nd Boot [HDD]
3rd Boot [CD]
Boot Other Device [Enabled]
Swap Floppy [Disabled]
Seek Floppy [Enabled]
Boot Up Num Lock LED [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
Security Option [Setup]
APIC Function [Enabled]
MPS Table Version [1.4]
BOOT OS/2 for DRAM>64MB [No]
HD S.M.A.R.T. [Enabled]
Video BIOS Cacheable [Enabled]
ADV. CHIPSET
System Performance [High Performance]
CPU FSB Clock [166MHz]
AGP 8x Support [Enabled]
AGP Fastwrite Support [Enabled]
System BIOS Cacheable [Disabled]
Video RAM Cacheable [Enabled]
AGP Aperture Size [128MB]
I do currently have a PCI GeForceFX5200 8o, but im getting an AGP FX5600 this week. i know my card has nothing to do with AGP, but i've left most of the AGP settings alone since i'll be using it later. is this creating a bottleneck or tying up system memory to have it this way for now?
FREQUENCY/VOLTAGE CTRL
AGP Clock Value [Default]
xAGP Clock Value [66]
AGP Voltage Adjust [1.5V]
DRAM Voltage Adjust [2.7V]
CPU Ratio [By H/W]
CPU Vcore Select [By H/W]
PCI Clock Auto-Detect [Enabled]
Again, I have an 333MhzFSB Chip and a board that will support up to 400MhzFSB. help!

Ideal KT4V BIOS settings for XP2500+ Barton

I've read AMD's recommendations for the KT4V BIOS settings http://www.amdforums.com/showindex.php?s=&threadid=186506 , but they seem to be very generic. I would like to know the settings that would give me the highest performance, without causing any instability, using my present system and usage. My son does 3D animation and gaming on this computer. This is a stand alone computer (no network). The latest version BIOS for the KT4V offers an option in Power Management Features to enable CPU HALT Command Detection. I heard that this would work better than Cooler XP in cooling the CPU. I enabled it and my CPU Temp dropped 6-10 degrees C. Is this recommended? What is the down side of this action? My system is as follows: AMD Athlon XP 2500+ w/ Vantec VA4-C7040 CPU fan (w/Arctic Silver 3) MSI KT4V mobo Gainward Golden Sample Ti/450 TV w/ 128MB DDR (GeForce3 Ti 200) 2 - Kingston 512MB PC2700 DDR RAM Antec TRUE550 power supply 1 - 40GB 7200RPM hard drive 1 - 30GB 5400RPM hard drive 1 - CD-ROM 1 - CD-RW 1 - floppy drive Windows XP home Any help would be appreciated. Thank you, Barry

As a result of my research, these are the BIOS settings that I am using. My computer runs well and is stable.
* MSI KT4VL BIOS SETTINGS w/AMD XP 2500+ w/ Barton *
==================
Standard CMOS Features
==================
Time Set Correctly Upon first POST and after each BIOS Flash / CMOS Reset
Date Set Correctly Upon first POST and after each BIOS Flash / CMOS Reset
Primary IDE Master
Type AUTO
32Bit transfer Mode ON
Primary IDE Slave
Type AUTO
32 Bit Transfer Mode ON
Secondary IDE MasterType AUTO
32 Bit Transfer Mode ON
Secondary IDE Slave
Type AUTO
32 Bit Transfer Mode ON
Floppy Drive A Set Appropriately
Floppy Drive B Not Installed
Boot Sector Virus Protection Disabled
===================
Advanced BIOS Features
===================
Quick Boot Enabled
Full Screen Logo Show Disabled
Boot Sequence
1st Boot Device Floppy
2nd Boot Device CDROM/DVD whatever you use
3rd Boot Device IDE 0
Try Other Boot Devices No
S.M.A.R.T. for Hard Disks Enabled
BootUp Num-Lock On
Floppy Drive Swap Disabled
Floppy Drive Seek Disabled
Primary Display VGA/EGA
Password Check Setup
Boot to OS/2 No
Internal Cache Enabled
System BIOS Cacheable Disabled
C000,32k Shadow Disabled
APIC Function Enabled
MPS Table Version 1.4
=======================
Advanced Chipset Features
=======================
DRAM Timing Control
Current Host Clock Displays current FSB Frequency
Configure SDRAM Timing By SPD (Set to User first to change RAM timings)
SDRAM frequency 333 for PC2700 and above
SDRAM CAS# Latency 2
Row Precharge Time 2T
RAS Pulse Width 5T
RAS to CAS Delay 2T
SDRAM Bank Interleave 4-Bank
SDRAM Burst Length 8QW
SDRAM 1T Command Enabled
Fast Command Fast (start here and if Windows installs stable set to Ultra)
Fast R-2-R Turnaround Enabled
AGP timing Control
AGP Mode 4X
AGP Fast Write Disabled
AGP Aperture Size 256MB
AGP Master 1 W/S Write Enabled
AGP Master 1 W/S Read Enabled
AGP Read Synchronization Enabled
PCI Delay Transaction Enabled
========================
Power Management Features
========================
IPCA Function Yes
ACPI Standby State S1/POS
Call VGA at S3 Resuming Disabled
USB Wakeup From S3 Enabled
Power Management/APM Enabled
Power/Sleep LED Single LED
Suspend Time Out (Minute) Disabled
Display Activity Ignore
CPU Critical temperature 70 degrees C CPU HALT Command Detection Disabled
Power Button Function On/Off
After AC Power Loss Power Off
Set WakeUp Events
Wake Up on Ring Disabled
Wake Up on PME Disabled
Resume On KBC Disabled
Wake Up Key Any Key
Wake Up Password N/A
Resume on PS/2 Mouse Disabled
Resume By Alarm Disabled
Alarm Date 15
Alarm Hour 12
Alarm Minute 30
Alarm Second 30
===================
PnP/PCI Configurations
===================
Plug and Play Aware O/S Yes
Clear NVRAM No (Set One time only to Yes After Installing New Hardware or Moving PCI Cards Around)
PCI Latency Timer 64 (Set Higher for better PCI performance reduce if having sound or LAN problems)
PCI IDE BusMaster Enabled
Primary Graphics Adapter AGP for AGP card - PCI for PCI video card)
PCI Slot 1 IRQ Auto
PCI Slot 2/5 IRQ Auto
PCI Slot 3/6 IRQ Auto
PCI Slot 4 IRQ Auto
===================
Integrated Peripherals
===================
Floppy Disk Controller Auto
Serial Port 1 Disabled
Serial Port 2 Disabled
Serial Port 2 Mode Normal
IR Pin Select IRRX/IRTX
Onboard Parallel Port Auto
Parallel Port Mode ECP (For some Printers you may need to set as Bi-Dir or EPP)
EPP version N/A
Parallel Port IRQ Auto
Parallel Port DMA Auto
Onboard Midi Port Disabled
Onchip IDE Controller Both
Onboard LAN Enabled (Disabled if using PCI LAN card)
Onboard LAN PME Enabled (Disabled if using PCI LAN card)
AC’97 Audio Enabled (unless using PCI sound card)
MC’97 Modem Disabled
USB Controller All 6 USB Ports
USB Legacy Support Disabled (some people with legacy USB devices may need to enable)
Port 64/60 Emulation Enabled
===============
PC Health Status
===============
Chassis Intrusion Disabled
CPU Fan Detect Enabled (set to disabled BEFORE shutting down to install any PSU powered CPU fan)
======================
Frequency/Voltage Control
======================
Spread Spectrum Disabled (return to default setting to troubleshoot EMI problems)
CPU FSB Clock 166
CPU Ratio Auto
CPU Vcore (V) Auto
DDR Voltage (V) Auto (set to 1.6 if you have RAM instability)
Termination Voltage Auto
AGP Voltage (V) Auto

Bios Settings for AMD 2500+

Hi Guys,
I've just built a new system with a KM"M Combo series MSI motherboard. I've put an AMD 2500+ CPU in and set the bio settings all to default, however the CPU is shown as a 1700+ and then in Windows XP the actual speed is shown as being 1400+ Can anyone tell me which settings I need to change and to what.
Thanks.

KM2M uses a 133/266FSB max, the 2500 is a 333FSB CPU. you will never get it up to full speed on that board. Either swap it for a 2600 266FSB chip (good luck finding the rare critter) or a 2400. the 2600 has 3 versions, 1 @ 266, and 2 @ 333. All 2400's are 266FSB.
The other option is to run it at the speed it is running now, and knowing that you are underclocking it about 20%.

Default printer settings for HP Deskjet 882c

All I want to do is set this printer to print in black and white by default. If I wanted color, I would use my other printer ... I want faster than a snails pace so I brought this one back out.
Being a PC for my entire life, this should be an easy thing to set the default print settings on the printer. I don't see them!
What I am printing is emails off hotmail ... tons of them ... going back months ... so please don't ask me to add an additional step here ...
Pulling my hair out here ... help would be lovely!

You are on the right track for sure. The claim code is in fact printed in blue, so if your color inks are low or empty it will not show up.
I noticed there are 2 version of the 6500A, I will go under the assumption that you do not have the 'Plus' version since you didn't specify this, shouldn't be a big discrepancy either way (let me know if I am wrong).
Viewing your ink levels is covered here, your Cyan ink cartridge could be empty : http://goo.gl/RjIhbp
You can still find the claim code on the front panel of your printer without color ink. Go back to web services on your printers display and it will show your "*@hpeprint.com" email address. The prefix before the "@" is in fact your code.
Also note that your code has most likely expired, which happens after 24 hours of being generated. Not a big deal. If your code has expired you will have to reset the web services in your printer, this will generate a new printer code. You can do this easily from the front panel of your printer.
Follow this link and expand the section “What if I lose my printer code before registering?” under “Frequently asked questions (FAQs)”
http://goo.gl/0WUyIe
(*a note on step 4, some firmware updates may have simplified this entire step to be simply “remove web services”)
After enabling the web services again the printer code area will still be blank if you are out of cyan ink.
Regardless the new code will display on the front panel (under web services).
I hope this gets you going with ePrint. Let me know if you are having issues printing in color beyond this, or if you are still experiencing difficulties with ePrint.
I work on behalf of HP.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to install Windows 7 in UEFI modeand what bios settings for D30

How do you install windows 7 in UEFI mode and what bios settings do I need to install it on a D30 workstation.

Not a ThinkStation guy, but FWIW, that can happen when installing Win 7 in UEFI mode when CSM support is not enabled in BIOS.
Is CSM support - either explicit or by selecting "other OS" and turning UEFI back on as suggested above - an option?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Default Bios Settings for RS480MS-IL2

Similar Messages

Maybe you are looking for