Default bluetooth settings in services
Hi all. I have a Toshiba Portege R835-P56x which is relatively new as I got in October. I was trying to install a bluetooth USB device on my computer to connect to my phone since this laptop doesn't have bluetooth. In doing so, I had to make some changes in the services window under bluetooth support services in changing the startup to automatic. The changes didn't work and I had to set everything back. I did a restore and under services (which you get to by going to start then typing in services) say for bluetooth support services status - blank and startup - manual. Can anyone tell me the default settings that they have and if this is right? I would just like it to be the way it was before. Thank you!
Portege R835-P56X
For future reference, you (and other viewers here) can see how the default Startup Type for services is set at Black Viper's site. Scroll down.
Black Viper’s Windows 7 Service Pack 1 Service Configurations
He even provides the means to reset them automatically.
Windows 7 Services Registry Files
-Jerry
Similar Messages
-
Hi,
I was wondering if you could provide the default advanced settings for bluetooth after activation with a magic mouse...
Hope you can help with this.
Many ThanksYes, those are the same as my settings and I haven't changed them.
Regards,
Captfred -
MacBook won't wake up from sleep and Bluetooth Settings (Possible fix)
Hi,
I rest my SMC as per the instructions. I've done this a few times before and it my system sleeps one time correctly then glitches as previously noted. However, this time I did not use any Bluetooth device but I was connected to the internet via my wireless router. The computer has successfully entered 'sleep' and woke up several times without a glitch (white light flashing in front during sleep).
I the tried various Bluetooth settings starting with switching ALL the choices listed under the Bluetooth Advanced tab to off. I then switched on my Bluetooth mouse, used it for a while then I switched off the mouse (Microsoft Notebook Mouse 5000) and waited for the laptop to give the 'lost connection' notice. Once the notice disappeared I close the lid and the system entered sleep again (white light flashing in front) and woke without a hitch.
Next I restored the default Bluetooth Advanced tab settings including the ‘Allow Bluetooth device to wake system’, reconnected the Bluetooth mouse and used it for a while before closing the lid and placing the computer in sleep mode. I left the mouse on. Something very interesting happened…….the system properly entered sleep mode with the front white light flashing, I then intentionally moved the Bluetooth mouse and the system tried to wake with the lid closed. I saw the Apple logo light up briefly then shut off AND I also heard the Superdrive mechanism respond. The white light in the front of the system stopped flashing and just stayed on. The system would not wake. I had to hold the power button down till the white sleep indicator light shut off the boot the system back up. It is important to note that I DID NOT reset the SMC.
Once the system rebooted I made one change to the Bluetooth Advanced tab settings, Specifically, I switched off the ‘Allow Bluetooth device to wake system’. I used reconnected my Bluetooth mouse by turning it on. Used it for a while then closed the lid. The system entered sleep again (white light flashing in front) and woke without a hitch. The sleep mode works equally well now if I close the lid or select sleep from the menu.
I realize this may not help everyone but it has aleviated this problem, at least for the present on my system. I hope this helps some folks as well as the Apple techs.
JoeHi,
Just an update, it has now been one week since I modified my Bluetooth setting as per my post above. The computer is still going to sleep and waking without problems.
Joe -
Default printer settings for HP Deskjet 882c
All I want to do is set this printer to print in black and white by default. If I wanted color, I would use my other printer ... I want faster than a snails pace so I brought this one back out.
Being a PC for my entire life, this should be an easy thing to set the default print settings on the printer. I don't see them!
What I am printing is emails off hotmail ... tons of them ... going back months ... so please don't ask me to add an additional step here ...
Pulling my hair out here ... help would be lovely!You are on the right track for sure. The claim code is in fact printed in blue, so if your color inks are low or empty it will not show up.
I noticed there are 2 version of the 6500A, I will go under the assumption that you do not have the 'Plus' version since you didn't specify this, shouldn't be a big discrepancy either way (let me know if I am wrong).
Viewing your ink levels is covered here, your Cyan ink cartridge could be empty : http://goo.gl/RjIhbp
You can still find the claim code on the front panel of your printer without color ink. Go back to web services on your printers display and it will show your "*@hpeprint.com" email address. The prefix before the "@" is in fact your code.
Also note that your code has most likely expired, which happens after 24 hours of being generated. Not a big deal. If your code has expired you will have to reset the web services in your printer, this will generate a new printer code. You can do this easily from the front panel of your printer.
Follow this link and expand the section “What if I lose my printer code before registering?” under “Frequently asked questions (FAQs)”
http://goo.gl/0WUyIe
(*a note on step 4, some firmware updates may have simplified this entire step to be simply “remove web services”)
After enabling the web services again the printer code area will still be blank if you are out of cyan ink.
Regardless the new code will display on the front panel (under web services).
I hope this gets you going with ePrint. Let me know if you are having issues printing in color beyond this, or if you are still experiencing difficulties with ePrint.
I work on behalf of HP.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
I want to change the default user settings in iPlanet Directory Server 5.1 so admins can create individual users in the JAVA Console with the specific attributes needed by our organization per branch point.
key phrase: per branch point. I take it you mean that entries below a particular branch point share the same attribute/value pairs? That leads me to suspect that class of service would be of use to you, and the console would not need to change and your admins would not need to enter the info per user.
-
CTC DI all-in-one fails at Step: Upload Default ACL Settings
Hi,
i need your help.
I tried to install a NWDI on a SolMan (Rel. NW7.01 SP06).
I deployed the necessary SCAs (DI_CBS, DI_CMS and DI_DTR =7.01SP6).
At the next point I'd like to use the wizard for the initial setup (DI all-in-one) and here are my problem.
At the step "Upload Default ACL Settings" it aborts with the error: Not a valid URL: Unexpected character found [':' at position 7]
Here an an excerpt from the log:
================================================================================
Exception Class: java.net.MalformedURLException
Exception Message: Not a valid URL: Unexpected character found [':' at position 7]
Stack Trace
java.net.MalformedURLException: Not a valid URL: Unexpected character found [':' at position 7]
at com.sap.ctc.util.infra.BaseConfig.dispatchException(BaseConfig.java:243)
at com.sap.ctc.util.di.services.DTRServices.checkinFiles(DTRServices.java:373)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Caused by: java.net.MalformedURLException: Not a valid URL: Unexpected character found [':' at position 7]
at com.sap.dtr.client.lib.protocol.impl.URLScanner.next_token(URLScanner.java:587)
at com.sap.dtr.client.lib.protocol.URL.parse(URL.java:521)
at com.sap.dtr.client.lib.protocol.URL.(URL.java:63)
================================================================================
I checked the default Users. The NWDI_ADM, NWDI_DEV and NWDI_CMS (The NWDI_CMS was manuel created) exists and have the expective roles/groups and actions (e.g. NWDI_ADM = Group NWDI.Administrator = Role NWDI.Administrator + Action LcrInstanceWriterAll)
I checked the log/protocol and the strange argument there is dtrUrl : http://:/dtr.
I think the wizard is missing the right hostname an port for the as java. I tried to execute the Wizard with FQDN, simple hostname, localhost and edited also the host-file (like in other threads proposed).
The check of the SLD-Connection in the SLD-DataSupplier in the VA are OK (the http-settings and CIMClient Test works fine).
I spent a lot of time at the VA and configtool to finde the possible key with the missing value for the host an port, However with no success.
So now im here and hope some of you can give me an advice.
Best regards
Denis
Edited by: Denis Stricker on Jan 6, 2012 1:48 PMHello Denis
I have checked the attached error together with our expert for the DI
configuration wizard and found that the problem is most liked caused
by some variables that are not properly set by the underlying
framework (CTC framework) due to problems with the data bindings.
To investigate the problem in more details it is important for us to
know how the engine was being setup. Can you please let us know if you
directly installed the engine or if you upgraded an existing
engine? In case of an upgrade can you please tell us
which SP had the engine before the upgrade?
So if you upgraded from an earlier SP this might explain
your problem and we would directly know in which area to look.
Unfortunately we cannot offer automatic configuration
after an upgrade case (see our central CTC note: 923359) exactly for
such reasons (besides of that CTC don't know the state after the
upgrade). Configstore does not offer to add new parameters only to
modify.
As workaound you can try to run DI template and everytime where it
stops, do the step manually and skip the not working step.
Thanks
Kenny -
Default Apps Settings Not Staying Set
I have noticed that my default application settings keep resetting themselves each time I reboot. My default browser, mail app, EVERYTHING... without fail. Does anyone have a clue as to what would cause this to happen?
Try resetting the Launch Services database.
It contains that info, and may be corrupt.
Open /Applications/Utilities/Terminal, copy the following text in, and press return.
/System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.fram ework/Support/lsregister -kill -r -domain local -domain system -domain user
Good luck! -
Default application settings loses on restart or LaunchServices problem?
Hello,
Problem:
After doing this tutorial:http://support.apple.com/kb/HT1428. I have a problem with default application settings (file association). In other words, file function "Open with" is empty. I chose default app for specific file type, do function "change all" (or just start specific application) and everything works fine. Files are associated whit that app. But after restar (or shutdown) every association is reset to none (open whit also empty). FileVault is off.
So after restart I must to associate files whit programs manual, or launch all programs.
What I tried:
Deleting com.apple.LaunchServices.plist - no help
Script run in Terminal: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -kill -seed - works, restores default applications and Open with list (but only till restart)
Onyx app - no help
MAINTENANCE app- works after first restart, after second restart the same problem
RCDefaultApp app- no help
Please any advice?Here is output:
Step1:
none
Step2:
sudo: can't open /private/etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting
Step3:
com.paragon.ntfs.upd
com.paragon.ntfs.trial
com.macpaw.CleanMyMac.volumeWatcher
com.macpaw.CleanMyMac.trashSizeWatcher
com.macpaw.CleanMyMac.helperTool
com.google.keystone.user.agent
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
com.adobe.AAM.Scheduler-1.0
Step4:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
npContributeMac.bundle
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Flash Player.prefPane
NTFSforMacOSX.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Spotlight:
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
com.adobe.SwitchBoard.monitor.plist
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
.DS_Store
0023eur_.ttf
0024eur_.ttf
0025eur_.ttf
0026eur_.ttf
0286eur_.ttf
0626eur_.ttf
0628eur_.ttf
0895eur.ttf
AGENCYB.TTF
ARBLI___.TTF
Aeroportal_Bold.ttf
BAVEUSE.TTF
CANDARA.TTF
CANDARAB.TTF
Calibri Bold Italic.ttf
Calibri Bold.ttf
Calibri Italic.ttf
Calibri.ttf
DINGMAPS.TTF
FUTUBC1.TTF
FUTURAMC.TTF
FUTURA~2.TTF
Franklin Gothic Book Italic.ttf
Franklin Gothic Book.ttf
Futura.ttc
Groovy Fast.ttf
Grover-Bold.otf
GroverCaps-Bold.otf
GroverCaps.otf
GuardianEgyp-Black.otf
GuardianEgyp-BlackIt.otf
GuardianEgyp-Bold.otf
GuardianEgyp-Hairline.otf
GuardianEgyp-HairlineIt.otf
GuardianEgyp-Light.otf
HelveticaNeue-Black.otf
HelveticaNeue-BlackCond.otf
HelveticaNeue-BlackCondObl.otf
HelveticaNeue-BlackExt.otf
HelveticaNeue-BlackExtObl.otf
HelveticaNeue-BlackItalic.otf
HelveticaNeue-Bold.otf
HelveticaNeue-BoldCond.otf
HelveticaNeue-BoldCondObl.otf
HelveticaNeue-BoldExt.otf
HelveticaNeue-BoldExtObl.otf
HelveticaNeue-BoldItalic.otf
HelveticaNeue-BoldOutline.otf
HelveticaNeue-Condensed.otf
HelveticaNeue-CondensedObl.otf
HelveticaNeue-ExtBlackCond.otf
HelveticaNeue-ExtBlkCondObl.otf
HelveticaNeue-Extended.otf
HelveticaNeue-ExtendedObl.otf
HelveticaNeue-Heavy.otf
HelveticaNeue-HeavyCond.otf
HelveticaNeue-HeavyCondObl.otf
HelveticaNeue-HeavyExt.otf
HelveticaNeue-HeavyExtObl.otf
HelveticaNeue-HeavyItalic.otf
HelveticaNeue-Italic.otf
HelveticaNeue-Light.otf
HelveticaNeue-LightCond.otf
HelveticaNeue-LightCondObl.otf
HelveticaNeue-LightExt.otf
HelveticaNeue-LightExtObl.otf
HelveticaNeue-LightItalic.otf
HelveticaNeue-Medium.otf
HelveticaNeue-MediumCond.otf
HelveticaNeue-MediumCondObl.otf
HelveticaNeue-MediumExt.otf
HelveticaNeue-MediumExtObl.otf
HelveticaNeue-MediumItalic.otf
HelveticaNeue-Roman.otf
HelveticaNeue-Thin.otf
HelveticaNeue-ThinCond.otf
HelveticaNeue-ThinCondObl.otf
HelveticaNeue-ThinExt.otf
HelveticaNeue-ThinExtObl.otf
HelveticaNeue-ThinItalic.otf
HelveticaNeue-UltLigCondObl.otf
HelveticaNeue-UltLigExtObl.otf
HelveticaNeue-UltraLigCond.otf
HelveticaNeue-UltraLigExt.otf
HelveticaNeue-UltraLight.otf
HelveticaNeue-UltraLtItal.otf
HoneyScript-Light.ttf
HoneyScript-SemiBold.ttf
IRONMAN_.TTF
MyriadPro-Black.otf
MyriadPro-BlackSemiExt.otf
MyriadPro-BlackSemiExtIt.otf
MyriadPro-BoldSemiExt.otf
MyriadPro-BoldSemiExtIt.otf
MyriadPro-SemiExt.otf
Saginaw Bold.ttf
Saginaw Light.ttf
Saginaw Medium.ttf
Sansation_Bold.ttf
Sansation_Bold_Italic.ttf
Sansation_Italic.ttf
Sansation_Light.ttf
Sansation_Light_Italic.ttf
Sansation_Regular.ttf
Santa Fe LET Fonts
Savoye LET Fonts
Scriptina Pro.ttf
Wingdings.ttf
Zodiastic.ttf
arialbd.ttf
arialbi.ttf
ariali.ttf
din-abl_.ttf
din-abll.ttf
din-al__.ttf
din-all_.ttf
din-aml_.ttf
din-bl__.ttf
din-bll_.ttf
din-ll__.ttf
din-lt__.ttf
frutblv_.ttf
frutblvi.ttf
frutlv__.ttf
frutubv_.ttf
frutv___.ttf
frutvb__.ttf
frutvbi_.ttf
frutvi__.ttf
futbclt.TTF
futura-bold-bt.ttf
futura-md-bt-medium.ttf
merge_light.otf
neuropolitical rg.otf
nhelblcv_1.ttf
nhelmv__1.ttf
phagspab.ttf
rotis1vb_1.ttf
rotissv1_1.ttf
rotissvi.ttf
science.ttf
segoeprb.ttf
segoescb.ttf
segoeui.ttf
techniqo.ttf
ufonts.com_00cryonixbold.ttf
ufonts.com_078mksdmediumcondensed.ttf
ufonts.com_a_technocratbroken.ttf
ufonts.com_agencyfb-blackcondensed.ttf
ufonts.com_agencyfb-regularcondensed.ttf
ufonts.com_arenacondensed-bold.ttf
ufonts.com_endzonecondensed.ttf
wingding.ttf
wmfood2.TTF
wstartt2.ttf
y2kboogie.ttf
zenon1.ttf
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.ABExchangeSource.DD57C94C-A28C-43D6-86D1-DF0 944A06ED2.plist
com.google.keystone.agent.plist
com.macpaw.CleanMyMac.helperTool.plist
com.macpaw.CleanMyMac.trashSizeWatcher.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
Library/PreferencePanes:
.SO0pb0Capdhc9KjH8+pS
Step5:
iTunesHelper, Lion Launch Services Fix, moveAddict
(Lion Launch Services Fix- I use it for reseting launchservice after restart) -
Cannot open Bluetooth Settings HP DV8T-1000
I am running Windows 7 64-bit.
I have the HP DV8T-1000 with built in bluetooth.
The software for the bluetooth in installed (in fact I uninstalled and reinstalled it). Everything says "the device is working properly" however if I right click the bluetooth icon, then click "open bluetooth settings" nothing happens.
When I click on show bluetooth devices it just searches forever and finds nothing.
When I click on add a device it never finds my discoverable Motorola S305 headset.
I have checked on the HP website and I have the latest drivers installed.
Any ideas would be greatly appreciated. I think if I could get into the bluetooth settings perhaps I could solve the problem. Who knows.
Darren
This question was solved.
View Solution.Thanks so much for the advice. It helped me solve the problem!
When I ran services.msc I saw 2 items for Bluetooth:
Bluetooth Service - Handles installation and removal of bluetooth devices - Started - Automatic
Bluetooth Support Service - The bluetooth service supports discovery and association of remote bluetooth devices. stopping or disabling this service may cause already installed bluetooth devices to fail to operate properly and prevent new devices from being discovered or associated. - Disabled
Took some effort to get "bluetooth support service" started but once I did I could then open bluetooth options.
I still could not sync my device though. Next I checked to see if it would now show up as already installed and it did. I clicked the connect button but got an error.
Next I deleted the device and re-discovered it. Now it all works great!
Thanks so much!
Darren -
Excel 2010 not using the default print settings
Currently got an issue with Excel 2010 not using the default print settings for a couple of users on our network,
basically when pressing cntrl P or selecting the print option from the file menu the printer settings are different to the print settings selected in the devices and printers menu, we have checked the print drivers etc but this has still not resolved the
issue, all other office programs are fine and also other users are reporting this issue more and more with different printers,
tried restarting print spooler service and re-installing office but this has come to no avail,
any ideas would be much appreciated!Hi,
This issue occurs because the Page Setup settings that you specify in your file override the settings that you specify in the printer driver properties.
To work around this issue, do not specify the paper size, page orientation, or page margins in the printer driver properties. Instead, specify these settings in your workbook.
To specify these settings, follow these steps:
1.Start Excel, and then open the workbook you want to change.
2.In Microsoft Office Excel 2010, click the sheet that you want to print, and then click the Page Layout tab. In the Page Setup group, click Page Setup to open the Page Setup dialog box.
3.Click the Page tab.
4.Under Paper size, click the paper size that you want.
5. Click Options button and in Printing Shortcuts tab, in the Paper source area, perform one of the following steps: ◦If the printer can automatically select the correct paper tray to use, click Default tray in the First page list, and then click Default
tray in the Other pages list.
Default tray is the default setting in both of these lists.
◦If the printer cannot automatically select the correct paper tray to use, you may have to select the paper tray that contains the paper size that you selected in step 4.
To do this, click the appropriate paper tray in the First page list and in the Other pages list.
6.If you want to change the page orientation or its page margins, click the Finishing tab.
7.Select the options that you want.
8.Click OK.
9.Repeat steps 2 to 8 for each sheet of your workbook for which you want to specify settings.
Jaynet Zhang
TechNet Community Support -
Bluetooth - Detection of service failed
Hi, I have a Satellite A660 (PSAW3A-07U00R) with Windows 7 64bit. I had my Microsoft Bluetooth Notebook Mouse 5000 connected directly to the computer (the mouse has no dongle) and it was working fine.
The other day my computer froze (for about 1 hour) and i ended having to shut down by holding down the power button. When I restarted the computer it got to the log on screen than shut down with a blue screen. The blue screen didn't stay up long but said to try updating the bios if the problem persists. It than kept restarted and continuing to shut down with a blue screen and restart (at various stages, but mainly after I had logged on to windows) about 5 times before I could get on to internet explorer and download the updated bios and install it. The computer hasnt shut down since.
After that saga my Microsoft Bluetooth Notebook Mouse 5000 would not work. I deleted the mouse from the connected device window in the Toshiba Bluetooth Settings programme. I than tried to reconnect the mouse, the computer can see the mouse but will not connect to it and pops up with a message "Detection of service failed". I have uninstalled all the Bluetooth software and drivers and reinstalled them (Bluetooth Stack for Windows by Toshiba-v7.10.10(T); Broadcom Wireless LAN Driver-V5.60.48.35_DrvOnly; ConfigFree-8.0.28). I have tried connecting in Express mode and in custom mode with Toshibas Bluetooth connection wizard. I also installed Bluetooth Monitor-v4.04 and tried connecting the mouse through windows "devices and printers" adding new device, but still the same problem.
The mouse connects to my friends computer no problems and works fine, so its not the mouse.
So my mouse wont connect and I dont know if it was from the bios update or if windows maybe updated itself and caused all the problems.
Thanks in advance.Thanks for the reply.
Yes I removed the batteries from the mouse a few times and left them out overnight. I also changed the batteries as well not that there was anything wrong with the original ones, but the mouse still wont connect. -
Any way to override default printer settings into a PDF
Hi -- I work for a large organization that has lots of computers and printers and prints a lot of forms and documents. We are moving towards more digitization of documents and records including printing forms as needed as opposed to having large sets of forms onhand. This should save us a lot of time and money once complete as these forms often change and the old process would be to then trash much of these documents and re-print for just one change. The majority of our printers do have letter & legal trays as well as duplex support, however due to the vast number of users the default printer settings tied to each user and/or computer may be slightly different. While standardizing all the printer settings across all users/computers would be one solution, we don't anticipate doing this as depending on the job peformed the different settings may be more preferable / advantageous for that user.
As such the other solution I can think of is to hardcode the specific printer settings needed to correctly print a large document into that PDF file which may differ from that computer's print settings. For example, the default computer print settings may be to print on just 1 side but duplex would be encoded / scripted directly into the PDF so IRREGARDLESS of the computer/printer settings this document would always print duplexed.
Is there anyway to do this? I would need to do more than just duplexing -- ie some form sets would need to be both duplexed and 'fit to printable area' whereas some would need to be only on one page and 'shrunk to printable area', etc, etc. Our current practice is to insert a 1 page coversheet at the front of each document with the printer settings that need to be used for that form set, however this has been difficult for some users to do and has caused unnecessary time with our IT troubleshooting form printing.
-BrandonHi Brandon,
You can use the Print Presets in Acrobat for that purpose. Please follow the steps below:
1. Open the PDF in Acrobat
2. Open Document Properties dialog (using Ctrl + D)
3. Select the "Advanced" tab
4. In the "Print dialog Presets" section, you can choose DuplexMode as well as Page Scaling for this document.
Please let us know if this works for you
Thanks,
-Shilpi -
What are the settings for the "Default Client Settings"?
What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that.
Thanks
James A+, Network+, MCPHi,
The blogs below provides the default client settings.
Default Client Settings in SCCM 2012 SP1
http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
Note: Microsoft provides third-party contact information to help you find technical
support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce -
Hidden Bluetooth settings in 10.9 for serial
The new OS 10.9 Maverick hides the Bluetooth settings, I am no longer able to add new serial ports for my Bluetooth devices in order to connect to them via the screen command (screen /dev/tty.Bluetooth...).
I'm interfacing my phone with my computer and need a serial port to communication, this needs to be set up in the Bluetooth settings. As of the new OS it has been dumbed-down so much that these settings do not exist anymore. Funny thing is when you search for "serial" in the system preferences window it will only highlight the Bluetooth settings:
Please give back these settings, I'm no longer able to work with my computer because of this.I'm hoping the original poster has found some way to remedy this situation since this is an old topic. I do wonder how far you are all getting into the process, from what I can tell once you pair a device & connect to it you get new entries under /dev. One for a tty and one for a call up device (cu…). You may have others depending on the device capabilities.
ls /dev
/dev/cu.DeviceName-SerialPort
/dev/tty.DeviceName-SerialPort
Are they not the connections you are looking for? I'm not sure that you need to see the serial ports in the GUI to be able to use them via Terminal.
Please tell me what I'm missing. -
since installing the latest update on my iphone 3gs this afternoon whatsapp now says it cannot access my photos. I have gone to settings-location services- but whatsapp is not listed in the list below. Please help!!!!
Contact Whatsapp for support.
There is no logical expectation for Whatsapp to be listed under location services or for that to have any affect on what the app can access.
Maybe you are looking for
-
HOW DO I SEND AN EMAIL ON MY IPHONE OR IPAD AND MAKE IT APPEAR ON THE MAIL APPLICATION ON MY MAC? IT ONLY WORK THE OTHER WAY ---SENDING AN EMAIL ON MY COMPUTER ---APPEARS IN SENT ITEMS ON MY IPHONE AND IPAD.
-
Layer 3 network and netboot/multicasting - will/can it work across subnets?
Hi, have been running netboot across a few subnets using multiple nics and vlans that worked fine. We're to move to layer 3 so the vlans are going. So my problem is getting it to run across the subnets. Is there something we need to do to the network
-
hi, Please tell me how to pay vendor for cash purchases through FBCJ? please tell me whether it is possible to see the line items? how we can know about the amount? thanks Shraddha
-
[RFC][Authorization] Prevent Dump on RFC Call
Hi, I would like to have a tool to check consistencies throughout different SAP systems for a given user. For this, I call the Bapi called 'BAPI_USER_GET_DETAIL'. The problem is that, depending RFC user defined in SM59, it may end by a DUMP. Thus, is
-
What's the best output format to burn a dvd with?
what's the best output format to burn a dvd with? I normally select a h264, but i don't know which preset i should use (between "match source high bitrate and hd1080...)