Default bluetooth settings

Hi,
I was wondering if you could provide the default advanced settings for bluetooth after activation with a magic mouse...
Hope you can help with this.
Many Thanks

Yes, those are the same as my settings and I haven't changed them.
Regards,
Captfred

Similar Messages

Default bluetooth settings in services

Hi all. I have a Toshiba Portege R835-P56x which is relatively new as I got in October. I was trying to install a bluetooth USB device on my computer to connect to my phone since this laptop doesn't have bluetooth. In doing so, I had to make some changes in the services window under bluetooth support services in changing the startup to automatic. The changes didn't work and I had to set everything back. I did a restore and under services (which you get to by going to start then typing in services) say for bluetooth support services status - blank and startup - manual. Can anyone tell me the default settings that they have and if this is right? I would just like it to be the way it was before. Thank you!

Portege R835-P56X
For future reference, you (and other viewers here) can see how the default Startup Type for services is set at Black Viper's site. Scroll down.
Black Viper’s Windows 7 Service Pack 1 Service Configurations
He even provides the means to reset them automatically.
Windows 7 Services Registry Files
-Jerry

MacBook won't wake up from sleep and Bluetooth Settings (Possible fix)

Hi,
I rest my SMC as per the instructions. I've done this a few times before and it my system sleeps one time correctly then glitches as previously noted. However, this time I did not use any Bluetooth device but I was connected to the internet via my wireless router. The computer has successfully entered 'sleep' and woke up several times without a glitch (white light flashing in front during sleep).
I the tried various Bluetooth settings starting with switching ALL the choices listed under the Bluetooth Advanced tab to off. I then switched on my Bluetooth mouse, used it for a while then I switched off the mouse (Microsoft Notebook Mouse 5000) and waited for the laptop to give the 'lost connection' notice. Once the notice disappeared I close the lid and the system entered sleep again (white light flashing in front) and woke without a hitch.
Next I restored the default Bluetooth Advanced tab settings including the ‘Allow Bluetooth device to wake system’, reconnected the Bluetooth mouse and used it for a while before closing the lid and placing the computer in sleep mode. I left the mouse on. Something very interesting happened…….the system properly entered sleep mode with the front white light flashing, I then intentionally moved the Bluetooth mouse and the system tried to wake with the lid closed. I saw the Apple logo light up briefly then shut off AND I also heard the Superdrive mechanism respond. The white light in the front of the system stopped flashing and just stayed on. The system would not wake. I had to hold the power button down till the white sleep indicator light shut off the boot the system back up. It is important to note that I DID NOT reset the SMC.
Once the system rebooted I made one change to the Bluetooth Advanced tab settings, Specifically, I switched off the ‘Allow Bluetooth device to wake system’. I used reconnected my Bluetooth mouse by turning it on. Used it for a while then closed the lid. The system entered sleep again (white light flashing in front) and woke without a hitch. The sleep mode works equally well now if I close the lid or select sleep from the menu.
I realize this may not help everyone but it has aleviated this problem, at least for the present on my system. I hope this helps some folks as well as the Apple techs.
Joe

Hi,
Just an update, it has now been one week since I modified my Bluetooth setting as per my post above. The computer is still going to sleep and waking without problems.
Joe

Any way to override default printer settings into a PDF

Hi -- I work for a large organization that has lots of computers and printers and prints a lot of forms and documents. We are moving towards more digitization of documents and records including printing forms as needed as opposed to having large sets of forms onhand. This should save us a lot of time and money once complete as these forms often change and the old process would be to then trash much of these documents and re-print for just one change. The majority of our printers do have letter & legal trays as well as duplex support, however due to the vast number of users the default printer settings tied to each user and/or computer may be slightly different. While standardizing all the printer settings across all users/computers would be one solution, we don't anticipate doing this as depending on the job peformed the different settings may be more preferable / advantageous for that user.
As such the other solution I can think of is to hardcode the specific printer settings needed to correctly print a large document into that PDF file which may differ from that computer's print settings. For example, the default computer print settings may be to print on just 1 side but duplex would be encoded / scripted directly into the PDF so IRREGARDLESS of the computer/printer settings this document would always print duplexed.
Is there anyway to do this? I would need to do more than just duplexing -- ie some form sets would need to be both duplexed and 'fit to printable area' whereas some would need to be only on one page and 'shrunk to printable area', etc, etc. Our current practice is to insert a 1 page coversheet at the front of each document with the printer settings that need to be used for that form set, however this has been difficult for some users to do and has caused unnecessary time with our IT troubleshooting form printing.
-Brandon

Hi Brandon,
You can use the Print Presets in Acrobat for that purpose. Please follow the steps below:
1. Open the PDF in Acrobat
2. Open Document Properties dialog (using Ctrl + D)
3. Select the "Advanced" tab
4. In the "Print dialog Presets" section, you can choose DuplexMode as well as Page Scaling for this document.
Please let us know if this works for you
Thanks,
-Shilpi

Default printer settings for HP Deskjet 882c

All I want to do is set this printer to print in black and white by default. If I wanted color, I would use my other printer ... I want faster than a snails pace so I brought this one back out.
Being a PC for my entire life, this should be an easy thing to set the default print settings on the printer. I don't see them!
What I am printing is emails off hotmail ... tons of them ... going back months ... so please don't ask me to add an additional step here ...
Pulling my hair out here ... help would be lovely!

You are on the right track for sure. The claim code is in fact printed in blue, so if your color inks are low or empty it will not show up.
I noticed there are 2 version of the 6500A, I will go under the assumption that you do not have the 'Plus' version since you didn't specify this, shouldn't be a big discrepancy either way (let me know if I am wrong).
Viewing your ink levels is covered here, your Cyan ink cartridge could be empty : http://goo.gl/RjIhbp
You can still find the claim code on the front panel of your printer without color ink. Go back to web services on your printers display and it will show your "*@hpeprint.com" email address. The prefix before the "@" is in fact your code.
Also note that your code has most likely expired, which happens after 24 hours of being generated. Not a big deal. If your code has expired you will have to reset the web services in your printer, this will generate a new printer code. You can do this easily from the front panel of your printer.
Follow this link and expand the section “What if I lose my printer code before registering?” under “Frequently asked questions (FAQs)”
http://goo.gl/0WUyIe
(*a note on step 4, some firmware updates may have simplified this entire step to be simply “remove web services”)
After enabling the web services again the printer code area will still be blank if you are out of cyan ink.
Regardless the new code will display on the front panel (under web services).
I hope this gets you going with ePrint. Let me know if you are having issues printing in color beyond this, or if you are still experiencing difficulties with ePrint.
I work on behalf of HP.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

What are the settings for the "Default Client Settings"?

What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that.
Thanks
James A+, Network+, MCP

Hi,
The blogs below provides the default client settings.
Default Client Settings in SCCM 2012 SP1
http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
Note: Microsoft provides third-party contact information to help you find technical
support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

Hidden Bluetooth settings in 10.9 for serial

The new OS 10.9 Maverick hides the Bluetooth settings, I am no longer able to add new serial ports for my Bluetooth devices in order to connect to them via the screen command (screen /dev/tty.Bluetooth...).
I'm interfacing my phone with my computer and need a serial port to communication, this needs to be set up in the Bluetooth settings. As of the new OS it has been dumbed-down so much that these settings do not exist anymore. Funny thing is when you search for "serial" in the system preferences window it will only highlight the Bluetooth settings:
Please give back these settings, I'm no longer able to work with my computer because of this.

I'm hoping the original poster has found some way to remedy this situation since this is an old topic. I do wonder how far you are all getting into the process, from what I can tell once you pair a device & connect to it you get new entries under /dev. One for a tty and one for a call up device (cu…). You may have others depending on the device capabilities.
ls /dev
/dev/cu.DeviceName-SerialPort
/dev/tty.DeviceName-SerialPort
Are they not the connections you are looking for? I'm not sure that you need to see the serial ports in the GUI to be able to use them via Terminal.
Please tell me what I'm missing.

Changing Lion PDF default security settings

After I create a document in Word or Pages, I save them as a pdf. I then want to digitally sign them in Adobe Reader. But the default security settting when saving as a pdf does not allow adding a digital signature. Anyway to change the default OSX settings so that digital signatures are allowed by default?
Preview just ignores digital signatures so I have not found any work arounds there.
...Bruce...

I'm OK with how to remove the security settings from a document: Documents > Properties (security tab; "No Security").
What I'm looking for is the path to removing the security settings such that they are NOT applied when I convert a document to PDF. What is happening now is that when I convert a MS Word doc to PDF, the security settings are applied by default, which means I have to go the process, albeit a short one, of removing the security settings from the document - as referenced above.
So again, if I simply launch Acorbat Pro 9 (without opening of a document), what is the correct path to removing (permenently) the security settings so that they are no longer applied to a converted document by default?
Thanks in advance.

How to configure default parental settings for all users (10.7)?

Hello,
I've made a silent installation of iTunes using MSI files and it works well.
I need to enable parental controls and configure it. Users must be preventing of changing these settings.
At the end of the iTunes installation I automatically created registry keys :
[HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls]
"AdminFlags"=dword:001b7ac5
"AdminMoviesLimit"=dword:000000c8
"AdminTVShowsLimit"=dword:000001f4
"AdminRatingSystemID"=dword:0000000b
"AdminGamesLimit"=dword:0000012c
According to http://support.apple.com/kb/HT2102 it is the procedure to set default parental settings for all users and to lock these settings.
When iTunes is first launched, parental settings are not set nor locked.
I use iTunes 64 bits on Windows 7 64 bits.
Where is the mistake?
Thanks in advance.

You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

Excel 2010 ignores print server's default color settings.

Excel 2010 ignores print server's default color settings.
Our Setup:
Printers are hosted on Server 2008 R2 Print Server.
Two local printers are created on the print server for each Xerox MFP that we have.   Example: Xerox MFP (B&W) - Default settings are set to print black and white only.    Xerox MFP
(Color) - Default settings are set to print color.     So for every MFP we have two printers are created.
Both variations of the network printers are deployed to the users with the Black and White version being the default.    If a user needs to print something in color, they select the Color version of the MFP printer.   This
helps us save on color toner costs.
This works great for web applications, Microsoft Word, Adobe Reader, and other applications.   But, it doesn't seem to work in Microsoft Excel 2007 or 2010.   Whatever the default printer is of the two versions that are deployed,
excel seems to hold onto those printer settings.
Example: If your default printer is Xerox MFP (B&W), when you select Xerox MFP (Color), it still retains the Black and White selection in the printer properties. However, if you select a completely different model printer such
as Fax, and then go to  Xerox MFP (Color), it will pick up the necessary default color settings.
If I install the printers locally on the user's PC/Computer, it works perfectly.   However, it doesn't work when they are utilizing the print server's printers.
Things that I have tried:
Different drivers for Xerox. Global, PS, PCL.
Different brands of printers.   Still experience the same issue.
Different port names.
Different protocols, raw versus LPR.
Different versions of excel, 2007 and 2010.
Looked through group policy to see if I could force it.
Checked the excel sheet settings, black and white only was not selected.
Tried most of the printer properties settings.
Created a Server 2012 print server and experienced the same result.
Xerox's custom configuration file editor.
*Something to note, if I have the black and white version utilize PostScript Drivers and the color version utilize PCL driver, it correctly loads the color settings.   However, if you utilize Postscript for both versions, it doesn't.
I have to vary the print drivers. Ideally, I don't want to have to do this because I want consistency between prints.

Hi,
Make sure you have the latest printer drivers - go to the manufacture's website, download and install if necessary.
Jaynet Zhang
TechNet Community Support

Change the default margin settings for the MS word!

Hi All,
BI Publisher version:latest 10.1.3.4
DB:10.2.0.4
Oracle Apps:12.0.6
OS:AIX
We are facing an issue of which description is as below:
RTF output is being uploaded through "XML Publisher" Responsibility.
3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
Expected output:
So what we need to do is -
1. Check the MS word installation on the application server
2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
Could anyone please share such an issue faced before!
Thanks for your time!
Regards,

Hi All,
Moreover,
Our understanding about the RTF output is this -
When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
So what you could help us with is this -
1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
2. Change the default margin settings for the MS word.
Regards,

Xfce's default app settings keep getting changed.

My xfce default app settings are constantly being changed to KDE apps.

Raccoon1400 wrote:How can I change settings so kde cant get to it but xfce can?
Well ... that you can't do I guess. The dirty solution I proposed effectively blocks anything/anyone from changing it easily.
Like I said look in the KDE configuration panel for anything related with default apps and if it is possible to leave them alone. Not much more I can say, I use xfce only.
Another option is to backup that file (if indeed that is that file that controls the default apps) and when you start xfce you copy the backup over that file, when you logout from xfce make a backup. This way kde can mess it all it likes and you will still have your default xfce apps and an easy way to change it in xfce.

Bluetooth settings for BT Arc Mouse lost on restart since upgrade

Upgraded OSX last night and on restart my Bluetooth BT Arc Touch mouse is not working.
I remove the mouse from the bluetooth settings and, resetting the mouse, it then finds the device and I pair the mouse again.
It works!
Then when I shutdown my MacBook Pro, next time I switch on the mouse does not work again. Its showing as "Not Connected" in the bluetooth settings.
Very, very frustrating.
Have downloaded latest Arc Touch mouse drivers but no fix.
Any ideas?

PS.
In menu bar, bluetooth icon states "Bluetooth: Not Available".
Bluetooth is switched on.
The mouse is blinking red and green which means "Device is discoverable (trying to connect to the transceiver)."

How do i u acsess my bluetooth settings thru my phone to change name etc. Also cant connect to any devices

How do i u acsess my bluetooth settings thru my phone to change name etc. Also cant connect to any devices

What devices are you trying to connect to, and are they in pairing mode? Is the phone in pairing mode? The iPhone only connects to audio devices and to computers for tethering. You cannot use BlueTooth on an iPhone for file transfers to other phones or computers.

Will migration assistant change the default display settings on my new Mac?

I just set up a new iMac and used Migration Assistant to load from my Time Machine. But now the display looks muted and not as bright. Would Migration Assistant change the default display settings on my new Mac?

Migration Assistant may not be the cause. But you should reset the NVRAM and see it that fixes the issue.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

Default bluetooth settings

Similar Messages

Maybe you are looking for