Default Country Value while creating BP in Web UI

Dear Experts,
We are using  "BADI_CRM_BP_UIU_DEFAULTS" for enforcing certain values, including the country value (XX) for our case while creating new BPs in Web UI..
As we are expanding internatinoally, the BP creation in the next country is also taking the same value (XX) which is not desired, since it is mentioned in the BADI. The said BADI works only for the Web UI and our users are on web UI too. Had the users been on GUI, the same could have been populated through the user profile - parameter id LND for the desired value. But the parameter id setting unfortunately doesnt work for Web UI.
Neither is the table / field of the paramater id aval for calling up in this BADI.  Nor the tables associated with the BADI have any value as the BP is being created afresh.
Hence we are stuck how to fill the respective country values by default. To my knowledge using the paramater ID should have been the simplest way of handling it but for Web UI it doesnt work.
Seek your expert advice on the ways to resolve this please..
Kind Regards,
Tariq

Hi Tariq,
I'm not sure if you have the latest SP - recently, a new BADI - BUPA_SET_DEFAULT was released which allowed defaulting of fields in the BAPI and Web UI scenarios. You can use that BADI to default the fields for country, name, and even other address fields on the Web UI.
If you don't have this BADI in your system, do search for SAP notes, which will also have the documentation about this.
Hope this helps you.
Regards,
Rishu.

Similar Messages

  • Issue while creating a new web part page (Safeunit.aspx) within a folder located under a Document Library.

    Hi, I am facing an issue while creating a new web part page (Safeunit.aspx) within a folder (Safematic Seal Support Systems) located under a Document Library (Product Information Documents).
    The path I am explaining:
    Going to the Document Library (Product Information Documents) --> now inside that, clicking on a folder (Wet Seal Support
    Systems) --> now inside the folder clicking on another sub-folder (Safematic Seal Support Systems) --> Here I want the web page Safeunit.aspx
    Issue is that when I reach to the required destination, and want to create the web page by clicking on 'Site Action' --> 'Create' --> 'Web Part Page', now while selecting the Document Library name from the drop-down list, I do use 'Product
    Information Documents' since the folder is inside this library only; but that create the page directly under the 'Product Information Documents' library, not under the sub-folder (Safematic Seal
    Support Systems).
    FYI, it is SP2007 version.
    Kindly assist in this. Thanks in advance.

    I see that you have the namespaces reference in your code.
    I think you have changed the NameSpace name of your code to CreateSPFolder, change the reference in all your manifest, and other files to point to the current namespace name. It should help.
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • Defaulting  transportation zone value while creating the consumer in shop

    Dear Experts
    i have a requirement where i have to default the transportation zone value as "0000000001".
    when ever a new consumer is created in the webshop when it flows to r/3 it must contain trasnportation zone value as "0000000001"(defaulted) could you tell me how can i achieve this i tried to default the value using the transaction varient which doesnt solved my problem
    Thanks & Regards
    V.Srinivas

    Srinivas,
      Did you check if your reference customer in the webshop has the same transport zone ? Once done, check if the answer in this thread would help you.
    Reference Business Partner Data mapping to Consumer Master data
    Thanks!
    Surya.

  • AIX 5.2 : how to pass password value while creating a user on AIX server

    Hi ,
    Test connection is successful with AIX server , I can successfully create a user on AIX server, with defualt password.
    I am not passing the any password value still some default value is being populated for the user...
    In AIX while creating the user , use get force to set the password...
    But while configuring the schema for AIX adapter ...if password attribute is given then it will give the error
    as invalid attribute...while creating a user if password value pass...
    how to set the password for the user..what attribute need to set for the password .
    thanks ..

    The default password might be the IdM account password of the user you are trying to provision. You don;t need to keep password in the resource schema. Just set password.password and password.confirmPassword and select AIX resource for password reset. Check the workflow-form-views document for more information on password view.

  • How to manual maintain TAX condition value while creating sales order

    Hi
    I am creating one Tax condition suppose JLST without access sequence .
    while creating sales order I am manually maintain the % value of TAX. suppose it is 1%
    then I see It show some value in TAX .
    save that sales order & creating delivery document for that but when I create Invoice its show error.
    " Tax code  in procedure CMTAXP is invalid ".
    I know the configuration only for Tax condition with vk11 condition record .
    BUT now I want to maintain TAX condition at the time of creating sales order.
    so I remove the access sequence of that condition .
    but It shows tax code error while billing.
    My main question is that If i maintain condition record while creating sales order then how i can assign Tax code .
    Can it is possible ?
    if yes then How?
    please help me.
    thank you

    Hi,
    The "straight-forward" answer for Tax Code creation is contact the FI consultant. He shall help you, by creating Tax codes.
    I have tested, with creating a tax cond type (copy of MWST) & manually entering values. I can create Sorder, Dlv and Bill but I cannot create an Accounting document. That is because of every line (amount) a Tax code is necessary.
    I THINK, you can NOT have manually filled tax codes; access sequence is needed to get the tax value (%) and the Tax code from the condition record.
    There is lot of material on the web to understand Tax classification, code etc. etc. See a useful link below -
    http://www.sapgeek.net/2010/04/sd-determines-tax-code/
    In short Tax code is a must and take the help of your FI consultant for the configuration of the same.
    BTW - Tax code is already made created for MWST, therefore I suggested that you can use MWST. Furthermore, you can change the values corresponding to Tax codes in FTXP.
    But if you are a beginner in these things, better take help.

  • Can we Set the Default SAP Component while Creating Support Message

    Hi Friends,
        I Have got requirement like, when we create the support desk message from any application system by default the sap component should get selected which we have determined in Solman.Our Business secnario is too complex user give create the support message without giving the Sap Component or they give wrong sap Component, so we want to set the sap component get selected by default while creating the support desk message, guide me in solving this issue.
      Regards
        Charan

    I think your logic is reversed.  I think it's better to let users create messages from the application areas from which they are having the problem.  Based on the standard SAP component which defaults into the component field, the ticket can be routed to one of your 20 teams.  This is where the agent detemination rule for support team can be configured.  There are a number of message on the forum regarding support team configuration.  This way, if your 20 teams can't solve the problem (for example SAP defect) then the message can be forwarded directly to SAP using the correct component.  Good luck.

  • Error while creating https based web clipping portlet

    Please help me if any one has created https based web clipping portlet. I'm getting the following error when https url is used during clipping :
    An exception has occurred : oracle.portal.wcs.transport.http.HttpTransportException WCS-510 -- HTTP connection failed to URL https://google.com by method get
    Please click "Cancel" or "Back" in the above panel (if present) to retry. Otherwise, please try to click "Back" (from the browser) to go back to the Oracle Portal page to restart.
    both are not working
    Steps performed :
    1) Added proxy settings in provider.xml
    2) Imported certificates from https site into WLS_Portlet key store
    Thanks
    Bikash

    Hi,
    Are you using proxy server? if yes you have to configure it, or it is problem with your provider.xml file. Can you past the code from provider.xml related to proxy setting?
    I have resolved this issue by follow following technique, Look this code from provider.xml
    <proxyInfo class="oracle.portal.provider.v2.ProxyInformation">
    <!-- <httpProxyHost></httpProxyHost>
    <httpProxyPort></httpProxyPort>
    <dontProxyFor>*.mycompany.com</dontProxyFor> -->
    <proxyUseAuth></proxyUseAuth>
    <proxyType></proxyType>
    <proxyRealm></proxyRealm>
    <proxyUseGlobal></proxyUseGlobal>
    <proxyUser></proxyUser>
    </proxyInfo>
    commented first three tags and removed value from remaining tags.
    Just try with that, Hope this will solve your problem
    Muhammad Nasir

  • How to avoid XVBPA line item values while creating sales order

    Hi Friends
    I am creating Sales order using function module IDOC_INPUT_ORDERS, for that I am passing partner details through segment E1EDKA1.If I pass the same partner details(Partner number, name1,name4,city,postel code) which is same like customer master,
    I can able to book the order and entries are coming only one time in VBPA table(Header Item level).But if I change any value for the particular partner in the Input(For example Name4, there is no value in customer master but I added through program).Now its creating an order but its showing the entered partner informations in header level.When I checked the same in line item level, its not picking the values from header, its picking the values from customer master for that particular partner.
    So this line item also coming in VBPA table, because its different from header data.
    Anyone guide me, how to avoid this problem while booking order through program.
    Thanks
    Gowrishankar

    I am updating Ship-To-Party value in segment E1EDKA1 and calling IDOC_INPUT_ORDERS function module to create the sales order.
    In this case for the particular partner there is no NAME4 value in KNA1, I am passing some value through this segment E1EDKA1.
    So its creating an order with this new addresses , so its generating new ADRNR in VBPA header level.Thats fine.But the same time
    its not copying the same value from header to line item.
    In Line item level again its picking the address details from KNA1 for the particular partner number.So its showing Blank value in NAME4 field of line items.Its creating and spllitting issue, while creating delivery.
    Thanks
    Gowrishankar

  • Default key figure while creating an ODS

    Hi Experts,
    1.Can you tell me what is the default key figure that we get while creating an ods.
    2.what are the settings that you have to maintain to reduce the ODS activation.
    Regards,
    Vikram singh

    Dear Vikram
    1. 0ROWCOUNT - counter for the occurence of key fields
    2. various options:
    try to load master data before transactional data
    Performance is gained by deleting existing data before a complete replacement load. Deleting data from PSA helps to reduce PSA access times.
    You can also influence performance improvement by parallel processing. For BW 2.x, it is not possible to have data packets/requests loaded into an ODS object in parallel. In BW 3.x, you can load data from different requests in parallel to ODS activation queue. Transaction RSCUSTA2 can be used to control data ODS data load. Here you can define a maximum number of parallel dialog work processes, a minimum number of records per package, and a server group for
    load balancing and so on.
    For non-reporting ODS objects, if possible, turn off BEx Reporting setting
    use number range buffering
    See SAP Note Number: 634569 and 798015
    Hope it helps...

  • Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

    Hi ,
    I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username  was not correct. Verify that it was entered correctly and try again".
    I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
    What should i do ??
    Thanks in advance.
    Regards, Anurag

    HI,
    right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
    http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
    let us know your result
    Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

  • Display Net value while creating order

    hi,
    I want to display <b>Net price</b> while creating order. i did automatic pricing and the amount is coming for only basic price,freight and discount but i also gave rebate and that amount is not showing in Net field under sales order. (Net text field exist before Tax area)

    try the field vbap-cmpre(Item credit price) this should be included the tax. you can also put a new subtotal line in you calculation scheme and put this amount in an kzwi to the vbap.
    greeting
    bernd

  • Set new value as a default value while creating PD(Performance Dailog) Form

    Hi,
    In Performance management,
    While clicking on the Create new PD Form Button, We are getting one Pop up window with the deafult selection screen.
    In that,
    We are getting Valid From: and Valid To value bydefault as a '01.01.2011' and '31.12.2011' .
    We need to change that value. How can we set our new value as a default value.
    We checked in debugging, this values are hardcoded in the SAP standard dyanpro component.
    how can we set our new default value?
    Please suggest.
    Thanks in advance.
    Monika

    You create it through PHAP_ADMIN_PA?
    The validity period is being defined by the BAdI HRHAP00_DOC_DEF_DV
    Implementation HRHAP00_DOC_DEF_DV02,
    can you chekc this/
    If you want to create appraisal documents for multiple participants, a
    more convenient way would be to use 'PHAP_PREPARE'. This also sets the
    validity period.
    If you still want to create the appraisal documents using 'PHAP_CREATE'
    and you want to use the BAdI for defaulting the validity period, you can
    adapt the BAdI implementation to your needs yourself. In that case,
    please make a copy of the BAdI implementation 'HRHAP00_DOC_DEF_DV02'.
    When creating a new appraisal, the system suggests the period January 1
    to December 31 of the current year as the default appraisal period. You
    can change this default by changing the Business Add-In (BAdI)
    HRPDV00APPRAISAL0001 in the ERP system."

  • Default values while creating PO

    Hi Experts,
    There are ceratin fields which can be defaulted at item as well as header level in purchase order.
    Now please guide me that is there any possibilty to add any field apart from the list of fields given by default.
    If yes then please suggest the way.
    rgds

    In the Personal Settings button in the PO entry screen in transaction ME21N, a new window pops up. This window has two tabs: Basic settings and Default values.
    The Default values screen itself has two tabs: PO header and PO item. When you click on the PO header tab (Figure 1), the system displays PO header fields such as Document Type, Purchasing Org., Purch. group, and Company Code. You can set a default value by selecting the desired value from the respective drop-down menus. The advantage of setting defaults here is that these are applicable only to POs and not to every transaction. Once you save these defaults, the corresponding fields are populated with these default values each time you run this transaction.
    This will help you in setting default values to fields at header and item level.
    -Hari.

  • Problem while Creating IBase from WEB UI

    Hi,
    I am trying to create a New Ibase from WEB UI. But, alwayz the IBase category is defaulting to "Functional Location" and this field is not in Editable mode also.
    So, I am not able to create the Ibase with any other categories.
    Please do suggest to solve this issue.
    Thanks,
    Sandeep

    HI,
    Check the settings in SPRO path:Customer Relationship Management ->Master Data ->Installed Base ->Installed Base Category ->Define Installed Base Category and Installation Rules .
    Here for the Ibase category which you want to maintain chech the Maint rule.It should be set to "Maintenance Allowed Using Installed base Management"
    I think currently only for Ibase category FL this setting is maintained thats the reason its taking as default.
    Regards,
    PP

  • Error while creating MBO with web service data source

    Hi All,
         I am trying to create MBO by selecting web service as a data source type in SMP 2.3. I am providing sharepoint webservice url of type wsdl with HTTP basic authentication. However, I am getting following error can anyone help me in that. Looking for detail explaination as this is new for me...
    (For "define XSLT manually" I am using sample .xsl file)
    Regards,
    Harshada

    Harshada Karane
    Are you using any proxy in your browser? If yes, please set the proxy in workspace and then trHow to bypass proxy settings in SMP workspace for connecting any public Web Service within corporate Network
    Rgrds
    JK

Maybe you are looking for