Default display parameter settings in CM01 & CM21

Dear all Hi,
Every time i need to change the display parameters so that the displays what i need, but how to make these settings defualt as when ever i execute the transaction, the system should display the default according to user or variant that i have created.
Thanks in Advance.

Hello All,
Any other suggestion from the experts, please do share with me.
The requirement is the system shlould display the evaluation CM01 & planning board CM21on a "Day" scale.
Now the default settins is showing weeks, sugeest me how to make default dispaly as day.
Is there a variant that i can create?
Thanks in advance.
Edited by: Shaiz on Dec 15, 2009 5:23 AM

Similar Messages

How do go back to my default display color settings? Just bought Spyder 3

Hello out there in Genius land...
I just purchased Spyder 3 Pro to calibrate my display monitor, but in order to do this correctly, I need to go back to my default color display settings.
I have manually calibrated my display several times in the past in the advanced mode, so I am familiar with this process, but I am unable to figure out how to go back to the default. Can't find a default option in the color settings tab.
Any assistance in this matter would be greatly appreciated.
Thanks,
Anneita

Thank you for your quick response.
I just checked mine since I never changed it. It shows I have two default color >displays - Color LCD.
When I select either one, the "Delete Profile" button is grayed out. This would >indicate to me that you should also still have your "default" color profile >showing.
Hmmmm....
Good point about the grayed out "Delete Profile" button. I went back into my "Color" tab to check it out, and I have 4 different profiles listed:
- 12-30-10
- 7/29/08
- Color LCD
- Color NTSC (19530 Calibrated
When I click on each of them, they show a totally different display color.
The only one that the "Delete Profile" button is not grayed out is 12-30-10, which I made on that date. The other 3 delete buttons are grayed out. But I am thinking that my actual default may be the one that says "Color LCD" like yours.
Is that safe to assume? What do you think?
Thanks,
Anneita

PSAPTEMP default storage (Parameter settings)

Hi there,
I am trying to increase INITIAL and NEXT values for default setting of PSAPTEMP. Using sapdba version 9, under Tablespace, when I select the INITIAL and change value, the value gets reset to default 1024K. How can I extend these values. Do I need to drop and recreate or can I do it online.
Regards,
Jeet

Dear Jeet,
first of all: don't use sapdba anymore.
It's not developed anymore and the recommendated tool is now br*tools.
See note
12741 - Current versions of SAPDBA and BR*Tools
for details
Concerning your question:
When you've got a locally managed temp. tablespace (as it is recommended) then the INITIAL and NEXT values should be identical and the allocation type for the tablespace should be UNIFORM.
The exact value for this parmeters depends on the sort_area-size used in the database.
The formula looks like this:
( N * sort_area_size ) + 2 * db_block_size
db_block_size is 8K in SAP systems and the N depends on the size of your PSAPTEMP (tempsize):
N = 1 : tempsize <= 2 GB
N = 3 : 2 GB < tempsize <= 6 GB
N = 5 : 6 GB < tempsize <= 10 GB
N = 10 : 10 GB < tempsize
All this - in more detail - can be found in these notes:
164925 - Storage parameter of tablespace PSAPTEMP
659946 - FAQ: Temporary tablespaces
Hope that helps.
Best regards, Lars

How can I set bind parameter as Default Display Value in JHeadstart

Hi,
I am using -
JDeveloper Studio Edition Version 10.1.3.1.0.3984
JHeadstart Release 10.1.3.1.26
Can anybody help me for the following:
I am using a super class of ViewObjectImpl where I am definning a bind parameter (Student ID) using login userid:
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
Then I defined p_std_id in Bind Variables tab in VO Editor and used that in Where clause in the SQL Statement tab.
This is working fine.
Now what I want to do is:
I want to put the value of p_std_id as Default Display Value for a field.
Can anybody let me know how I can put the value of p_std_id in JHeadstart Application Definition?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hi Jan and Steven,
Thanks for your reply.
I need to show the default value in the table layout.
Steven, could you please give some more hints about EL Expression?
To obtain the value of p_std_id now and pass it on as bind param, I am using a class extending ViewObjectImpl. Inside that class I am using the following method:
I'd appreciate if you could help for the EL Expression.
Thanks
protected void executeQueryForCollection(Object Object, Object[] bindParams,
int i) {
String userId = ((ApplicationModuleImpl)getApplicationModule()).getUserPrincipalName();
try{
getLdapInfo(userId);
catch(Exception e) {
sLog.debug("executeQueryForCollection: Userid = " + userId);
if (bindParams != null)
for (int j = 0; j < bindParams.length; j++)
Object[] bindParam = (Object[])bindParams[j];
if ("p_user_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_user_id, setting value to " + userId);
bindParam[1] = userId;
if ("p_emp_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_emp_id, setting value to " + employeeNumber_from_LDAP);
bindParam[1] = employeeNumber_from_LDAP;
if ("p_std_id".equals(bindParam[0])) {
sLog.debug("executeQueryForCollection: found bind param p_std_id, setting value to " + studentNumber_from_LDAP);
bindParam[1] = studentNumber_from_LDAP;
super.executeQueryForCollection(Object, bindParams, i);
Thanks
Syed

Will migration assistant change the default display settings on my new Mac?

I just set up a new iMac and used Migration Assistant to load from my Time Machine. But now the display looks muted and not as bright. Would Migration Assistant change the default display settings on my new Mac?

Migration Assistant may not be the cause. But you should reset the NVRAM and see it that fixes the issue.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

Default Display Settings T61

Hi
Does anyone know what the default display settings are for the T61. Some settings were "changed" when the device would not connect to a projector in a hotel. It will now not connect to any external monitor.
Thanks
Phil

Native resolution on 13" MBP is 1280 x 800.
Open System Preferences > Display
There you will find a drop down list with different resolutions. Select 1280 x 800

How to set the default display date of Calender prompt of SMPortal???

Good Day!!
As for as my knowledge, the default date Visible in all Calender prompt will be the
Starting Date in the Specified date range either "RelativeDateRange" or "AbosoluteDateRange".
But we have a requirement to set the default date to a date in the middle of the specified range, I don't find any option to specify in Request Offering Wizard or MP's xml file.
Our scenario is as follows,
    We are trying to customize the CSPP's request offer "Request Virtual Machine", which has a user promt to select Decommission Date for the New VM. We have configured the date prompt as Relative Date range and set the
Start date as "1 day next to user's current time" and Maximum date to "90 days after relative date". So the user will get option to select Decomm date from (1-90) days with the defalut date as 1st day next to his current
time. But our requirement is to set the default available date as 90th date in the above mentioned Relative Date Range.
     I couldn't find any option in Request offering Wizard as attached below,
      Also I couldn't even find any tag to specify the default display date in the MP's XML file as attached below. Is there any other <tag> can be included inside <Details> tag to accomplish this ??
   Is there any other way to accomplish this???
    Please advise
Thanks,
Narayanababu
Thanks and Regards, Narayana Babu

This is probably a link editor parameter, see the linker and loader guide.
Another thing you can do is write your own sbrk() that will log whenever it's called, so you can at least see how many times it's called and with what values. If you really need in-depth instrumentation, write your own heap routines and give them the same names as the CRTL routines. The linker should find yours first and route all memory operations through them. At least, that's the way it worked for me on SunOS 4.1....

Default display filter

Hello guys. I would like to display files by default by other filter than "by name". I can change the display filter once, but at the restart of Bridge, it displays still by name because it is the "default". How can i change this "default display" ? Thank you

Hello Yammer,
Thank you for this answer
My problem is quite simple but i can't solve it.
In Bridge, the display filter of the pictures/files is by default by name.
I want the files to be displayed by default by type, and not by name.
I tried to change this by changing this parameter in the upper right corner of the window (see below).
But when I close Bridge, and restart it, the display is again on "by name". It's a little boring to reset this at each start of Bridge.
Hope that you understood my problem ...
Thank you again,
Regards
Felix

[solved]Default display orientation

Hi,
I want to change my display mode to portrait mode. The display orientation I need is got when I run the command
xrandr -o right
I want this to be my default display. What settings do I need to change.
Last edited by pramod1561 (2010-09-13 23:52:25)

By adding that command to your .xinitrc or similar it will only be run after your user logs in, therefore your login screen (if you use one) will still be at the default rotation. To set it on X startup you need to set that option in your xorg.conf, look for the option "Rotate" in man xorg.conf for more info.

Parameter settings for windows - Note

Hi,
Can anyone help me to know the SAP note number for default Parameter settings for windows .
I want to verify all the parameter values.I tried to find out the number, but no luck
We have severe performance issue in our D01 and Q01
Thanks is advance.
Regards,
Prakash

Hi,
Most of the performance parameters are OS independent. You need to check ST02 and check most of the SWAP comings in which area and there you can click on detail analysis menu which will give you parameters for the buffer settings. You need to adjust these parameters in instance profile in RZ10.
Also, if your database is oracle10g then make sure that SAP note 830576 should be implemented.
Thanks
Sunny

Windows 8.1 forgets dpi / display size settings for one monitor on almost every reboot

I use TV 32" with 1920x1080 and cintiq 13" with 1920x1080
when I boot my PC the resolution is fine but DPI is wrong.
In smaller monitor It's look like DPI is higher than the bigger one.
I already set dpi to be the same (smallest 100%) but it's not work until I do something to change display setting.
It's really annoy me. This problem is not happen when I use windows 8
Only solution I found is turn off
"Turn on fast start-up".
When I do that It's boot like what I want. every monitor is the same DPI.
But it'll make my boot time longer.
It should be just start up windows and use the same dpi from the start.
So I think this problem is a bug in windows 8.1
Best regards

Thank you for reply.
I've already used the latest graphic card driver. But It's won't help this issue.
In registry editor. I check those variables then value of them is already set like that blog suggest.
So , it look like when windows start-up(with fast start-up) It use something like
suggest value for different monitor size instead of what I set in control panel. But when I turn off fast start-up windows use my setting value.
And I think there are a lot of people who got the same problem as me.
Here is an example.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-desktop/windows-81-forgets-dpi-display-size-settings-for/385cb615-d699-47f8-8c12-717e3364c866

New mac user needs help with default display

hi, i am a new mac user and i accidentally changed the default display. I want to change it back to the default display but it doesnt seem like any of the options in "system preferences" - "display" change it back to the default out of the box display. please point me in the right direction. thank you!

im talking about the screen resolution. I went under "system preferences" then clicked on "display" and somehow the mouse clicked on another resolution which stretched everything out. so I went threw all of the difference resolutions and nothing seems to be like the default one. am i missing something? thanks

How to set PDF file default display size through Report Writter 6i

Anyone could help me, how to setup default display (magnification i.e 100% or 80%) for a pdf file generated by report writter 6i.
Thanks
Raj

hi,
regarding report, there is a dedicated report forum. you should post there.
but answer for your question is form is nothing to do with the pdf generation. you can call the report from the as usual.
In the report you should set the properties like
destype to 'file'
desname to 'path with file name'
desformat to 'pdf'

Display Geometry Settings GONE

I have a 21" Apple Studio Display (VGA) and am using it as a second monitor, but now with 10.6 the geometry settings are gone. Snow Leopard also tweaked/modified my displays so I do need to adjust the image or dramatically lower the resolution to get the image correct - it's distorted to an unusable state.
Anyone know of a third party tool to adjust the geometry of Apple's CRT displays - I have a second 17" in the basement that I'm sure will run into the same issue shortly - as I'm assuming Apple won't be of any help.

My iMac has had a similar problem since the display was repaired while the machine was still under warranty (the problem back then was rolling flickering lines). The display gradually becomes shorter and wider; the only remedy is to turn the machine off and let it cool down for a couple of hours. I have to keep my display geometry settings at a "happy medium" so the Dock arrows on the left side are not totally cut off and so I can read DragThing's tabs at the bottom of the screen.

Default display for iweb photo albums page

I am trying to make a web site using i web with several different photopages. I am using an albums page but the default display for the album covers is landscape. Can anyone tell me how to make them portrait so my pictures on the album cover are not cropped?

Hi,
this sounds to me ridiculous. This has to be considered as bug, not limitation as I am allowed to put pictures in portrait to my "Pictures"-template site. How can I contact Apple regarding this issue as on their support page they seem to hide the way to contact them in case of troubles... Bad customer care Apple...
my 2 cents
Xanthalas

Default display parameter settings in CM01 & CM21

Similar Messages

Maybe you are looking for