Default entry for Folder property - Changed behavior in SP14???

Hello,
Has anyone run into changed behavior for this page property in SP14. It seems to be valid for pages in both folders and worksets.
Ex. We have a workset that sits at 2nd level nav just below a 1st level entry point. So the workset is a 2nd level nav choice. The top page in that workset is the landing page for that nav and previously in SP9 the nav worked fine. We are finding now that in SP14 we have to set the Default Entry for Folder property to "yes" to make the 2nd level nav work. This could be another config issue in our environments but is following SP14 so far. Has anyone else sen this?
Thanks,
Doug Steckel
Air Products & Chemicals

Hi Daniel,
NavStructure:
... - Folder A
       - Page A <inv & defPage>
       - Page P1
       - Page P2
If you click on folder A, you get the content of page A which for the end-user is not explicitely visible in navigation. So page A "is" the content of folder A.
This is how web-like nav works, that you can click on a nav entry and that this entry has it's own content and not only the preset content of some sub entry.
Hope it helps to understand what I meant
Detlev

Similar Messages

Default Entry for Folder & Entry Point

Hello,
What's the difference between the two options ?
Thanks for your help

Christophe,
Could you be more clear ?
Entry point for what ? roles, entrypoints repository so on.
Entry points allow you to navigate from an iView to various KM folders that may be located in different repositories. You use entry points in the following places:
Entry Points iView
Selection screen (for example, when copying or moving items in KM folders)
Go To menu in KM navigation iViews
Patricio.

Track changes showing multiple entries for a single change?

Hi there .. I'm using Pages '09 v4.1 to edit MS Word '97 documents. I've been using the 'track changes' feature to work on chapters in a book and have done so with no problems so far (about 6 chapters so far in separate files). I went to start the next chapter and noticed that when I make a single change such as highlighting a word and making it italic, the tracking bubbles will show up as individual entries for every letter instead of for a single word. The really annoying thing is that it's not consistent .. some whole-word changes show up as a single entry, while some show as a few entries but don't necessarily correspond to how many letters are in the word being changed. When I try deleting specific tracking bubbles to see which part of the word they correspond to, it varies. For example, if I put the word "similar" in italics on page one, paragraph one, it shows up as 2 entries. When I delete the last entry, "imilar" will go back to standard font, while "s" stays italic until I delete the other entry. It's as though the words in the document are being recognized based on something other than the obvious, and certain letters are being grouped together in the program's brain, while others are separate.
It's not isolated to italics, btw. If I reformat the entire document to be left-aligned instead of center-aligned, it will show lots of separate tracking bubbles in various places through the document, rather than showing one bubble for my single change.
I've tried duplicating and saving a new version of the document, as well as creating a new doc and pasting everything into that and saving as a new doc, though I wasn't sure if this would carry over the problem .. It did.
It's not the end of the world as far as finishing this job, but it's pretty annoying and will be worse for the person who ultimately verifies the changes I've made. Any help is greatly appreciated.

TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
It won't cause any problem.

Problem with cp and ACL default entry for mask

I am having a problem with the cp command, copying to a directory with default ACL entries.
I don't think it is creating the ACL's of the resultant files correctly.
I have two users (let's call them mark and john).
As john I create a directory and give it ACL privledges to mark, as well as setting defaults to give john writes to anything mark creates.
john> mkdir for-mark
john> setfacl -rm 'user:mark:rwx,default:user::rwx,default:user:john:rwx,default:group::r-x,default:mask
:rwx,default:other:r-x' for-mark
john> getfacl for-mark
# file: for-mark
# owner: john
# group: john
user::rwx
user:mark:rwx #effective:rwx
group::r-x #effective:r-x
mask:rwx
other:r-x
default:user::rwx
default:user:john:rwx
default:group::r-x
default:mask:rwx
default:other:r-x
As mark I copy files to that directory:
mark> cp myfile /home/john/for-mark
mark> getfacl /home/john/for-mark/myfile
# file: /home/john/for-mark/myfile
# owner: mark
# group: staff
user::rw-
user:john:rwx #effective:r--
group::r-- #effective:r--
mask:r--
other:r--
The mask is incorrectly set to r-- instead of rwx.
This leaves john unable to write to myfile (although, strangely he can delete it).
I am NOT using the -p option on cp. I would expect this behavior if I did.
Mark can create a file with touch or vi and the mask is incorrectly set to rw-, which is a little better. Compiles are definitely created correctly with rwx.
Is this a bug? Or am I doing something wrong.

You are having issues in client 000 rite ?
I dont think login/no_automatic_user_sapstar = 0 will help you , This parameter will help you to login newly created client ( other than 000/001) with sap* and passowrd PASS.
login/failed_user_auto_unlock = 1 , will enable automatic unlock off locked user at <b>midnight</b>
Did you use the correct Maxdb sql command ?
Thanks
Prince Jose

CRMD_ORDER: how to set default values for Requester and Change Manager

Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!

Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason

Default File for folder

Hi everybody
I have a KM Navigation iView which display the content of a folder.
On the left I have the files in a layoutset of a Tree, and when choosing one of the files, its preview appears on the right.
The problem is that by default, if you don't press any file the screen stays empty,
and you have to choose one of the files to preview it. I want that by default one of the files will be shown in the preview. Is it possible?
Can I display a document by default (like KM Document iView)and still navigate to other files in the KM?
I hope the question was clear. If it wasn't you are welcome to ask me any question.
Thanks in advance
Omer

hi
KM Navigation Iview you have to play arround <b>target path</b> to document and layoutset just check applying layout of KM Document iview to KM navigation iview and vice versa.But in this context You cannot have both the functionality in one iview unless you use custom developed.
Hope this helps you.please do not forget to give points
With regards
subrato

Content repository - Multiple unrestricted ordering issue for a property

Hi there,
I have a problem in terms of getting the correct ordering for a property that I have defined in the BEA Content Repository. Does anyone know what can be done?
Below is a description of what I am doing. I hope someone can help me order the vector returned or advise me on a better way on doing this. Thanks for your help in advance!
Andrew
Description
In the BE Content Repository, I have set up a type with properties set to "Multiple Unrestricted" and of Data Type "String". Basically the entries for this property will be used to fill in a table on my HTML page.
e.g.
column_1 Multiple Unrestricted String
column_2 Multiple Unrestricted String
column_3 Multiple Unrestricted String
column_4 Multiple Unrestricted String
What I am planning to do is fill this in for say the weather. Column 1 will be the city name, column 2 will be the temperature, column 3 will be another city name and column 4 will be the temperature.
e.g.
Column 1 | Column 2 | Column 3 | Column 4
=========================================
City 1 | 12-20C | City 2 | 14-19C
City 3 | 20-25C | City 4 | 25-30C
City 5 | 5-10C | City 6 | -10-5C
and so on...
So for the defined content item I have entered in the following:
column_1 >> "City 1", "City 3", "City 5"
column_2 >> "12-20C", "20-25C", "25-30C"
column_3 >> "City 2", "City 4", "City 6"
column_4 >> "14-19C", "25-30C", "-10-5C"
However when I reference the content item in my HTML page, the ordering in the returned vector is totally different to the way in which i entered the data into the content repository...
I access the information this way:
<cm:getProperty resultId="vect_col_1" node="<%= content_node%>" name= "<%= RepositoryProps.COLUMN_1%>" isMultiple="true" resultType="String" />
Thanks for your help!

Hi there,
I have a problem in terms of getting the correct ordering for a property that I have defined in the BEA Content Repository. Does anyone know what can be done?
Below is a description of what I am doing. I hope someone can help me order the vector returned or advise me on a better way on doing this. Thanks for your help in advance!
Andrew
Description
In the BE Content Repository, I have set up a type with properties set to "Multiple Unrestricted" and of Data Type "String". Basically the entries for this property will be used to fill in a table on my HTML page.
e.g.
column_1 Multiple Unrestricted String
column_2 Multiple Unrestricted String
column_3 Multiple Unrestricted String
column_4 Multiple Unrestricted String
What I am planning to do is fill this in for say the weather. Column 1 will be the city name, column 2 will be the temperature, column 3 will be another city name and column 4 will be the temperature.
e.g.
Column 1 | Column 2 | Column 3 | Column 4
=========================================
City 1 | 12-20C | City 2 | 14-19C
City 3 | 20-25C | City 4 | 25-30C
City 5 | 5-10C | City 6 | -10-5C
and so on...
So for the defined content item I have entered in the following:
column_1 >> "City 1", "City 3", "City 5"
column_2 >> "12-20C", "20-25C", "25-30C"
column_3 >> "City 2", "City 4", "City 6"
column_4 >> "14-19C", "25-30C", "-10-5C"
However when I reference the content item in my HTML page, the ordering in the returned vector is totally different to the way in which i entered the data into the content repository...
I access the information this way:
<cm:getProperty resultId="vect_col_1" node="<%= content_node%>" name= "<%= RepositoryProps.COLUMN_1%>" isMultiple="true" resultType="String" />
Thanks for your help!

ICal default calendar for new event

When I sync a new iCal event from my PDA to iCal on my Powerbook, it defaults to a named, published calendar rather than "unfiled". Because of this, I immediately have to go through and change any new or changed events that have been sync'd to prevent them from being incorrectly published. I want to use the "unfiled" (and unpublished) calendar as my default calendar for new or changed events that I sync from my PDA, how do I do it?

If you are using iSync, press the Tungsten icon in its main window to drop down the configuration pane. Select the Unfiled calendar under the Calendar section as the Put events created on Palm into: option.
In the Missing Sync for Palm OS, double-click the Mark/Space Events conduit and select Put items from read-only calendars into: Unfiled. You have to create this calendar in iCal if it is not present already, before it can be selected in the Missing Sync.

HT5622 I just upgraded to a new MacBook and my wife is inheriting my old MacBook Air. How can I change the her MacBook Air to now be fundamentally hers? That is, so the House Icon under Users folder is her name and not mine? Also the default AppleID for p

I just upgraded to a new MacBook and my wife is inheriting my old MacBook Air. How can I change the her MacBook Air to now be fundamentally hers? That is, so the House Icon under Users folder is her name and not mine? Also the default AppleID for purchase stubbernly remains my own.

You do not mention it, but I will assume you are running OS 10.9.1.
Go to: Apple menu / System Preferences / Users & Groups. Click the padlock and enter your password.
Click the + (plus sign) and set up a new account for your wife. You have to enter a bunch of info. And then create the correct Login Options. Automatic login does not require a password from the selected user.
When that is done, verify the account works by restarting the computer and login as your wife.
Make sure that any applications in your own Users folder that will be needed are moved to the Applications folder in your wife's Users folder.
Now go back to Users and Groups, click the padlock and authenticate, select your own account, and hit the - (minus sign). This step cannot be reversed, so you might want to wait a few days before doing it.
When your wife is logged in, the App Store will know.

Changing default directory for iTunes Library.itl and iTunes Music Library.

I need to change the default directory for the files iTunes Library.itl and iTunes Music Library.xml permanently.
It must be relocated from the My Documents directory due to VPN reasons.
Has anybody an idea if this is possible? I could not find a corresponding registry entry.
Notebook Windows XP Pro

Using TweakUI to Move or Create Your Library/My Music Location
Use TweakUI (See: ’Disk is locked’ or ‘iTunes folder cannot be found’ when installing or opening iTunes ) to create a 'My Music' folder in a spot where you desire. iTunes should then find this location and deposit its Library files there, and the 'iTunes' folder and sub-folders as well (if you direct it to).
First, see this Article for some background information: What are the iTunes Library files?
If you cannot see the ‘My Music’ folder within the TweakUI drop-down selection, proceed on to the following:
1 On the start menu go to ‘Run’
2 Type in RegEdit
3 Navigate in RegEdit to HKEYCURRENTUSER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
4 Delete any entry for ‘My Music’
5 Navigate up the tree to HKEYCURRENTUSER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
6 Make sure there is an entry for ‘My Music’ and is pointing to C:\Documents and Settings\[username]\My Documents\My Music (you can edit the value by double clicking it)
7 Close RegEdit
8 Reboot
iTunes &/or TweakUI should now be able to find the folder.

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
For example...
I am on a webiste and wish to upload a photo.
I click on select file on the website
Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
How do I change this?

I am on a webiste and wish to upload a photo.
I click on select file on the website
You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
To change the download direction, you must do so through your browser's Preferences. If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums. I do not use Safari.
If using Firefox>Preferences>General>Save Files to:

How to change the default new project folder in Premiere Elements 13?

I keep all my projects on a different drive than the default My Documents folder. How can I change the default setting so that Premiere Elements does not try to create new projects in the My Documents\Pemiere Elements\13.0 folder? In fact, I do not want that folder to be used for anything (including layouts and styles).

steveb
Short version....
Referring to the 13.0 Folder in the Adobe Folder in documents, you wrote
In fact, I do not want that folder to be used for anything (including layouts and styles).
I do not believe that is possible.
For my best case scenario
Set the Scratch disks, not to Same As Project, but set for Custom with the set being the save location that you set for the project file.
Set the project save in, my preference, File Menu/Save As.
You are going to end up automatically with a 13.0 Folder in the Libraries/Documents/Adobe/Premiere Elements/13.0 Folder every time you open a Premiere Elements project. No matter how many times you try to delete the 13.0 Folder. And that 13.0 Folder will contain a Layout Folder and, if you applied a Style in the project, a Styles Folder.
Longer Version....
There is no problem directing your project file to the save location of choice. You can do that two way
1. After you open the project to the Expert workspace, go to File Menu/Save As to change the name of the project as well as the location for the save in order to avoid the defaults.
2. You can also do that through File Menu/New/Project.
That 13.0 Folder also gains its contents from the settings of the scratch discs in Edit Menu/Preferences/Scratch Disc - some examples preview files, disc encoding files, conformed audio files... Some Files/Folders are placed there automatically. So what to do to keep the Documents area clear of Premiere Elements files, project or otherwise after you have move all that you thought you could to a non Adobe default location? See above best case scenario.
Miscellaneous
1. If you set the save location of the project in either of the 2 ways, that setting will not hold from project to project. It will hold for that particular project.
3. If you set the Scratch disks in Edit Menu/Preferences/Scratch Disks, those settings seem to hold from project to project as well as for in the particular project.
Stevenb, please review and consider and verify. I have gone through several scenarios on what you would prefer. But, I do not see a way to make that happen with the programming that exists.
ATR

How do I change the default locations for the iTunes music and iPhone back-up folders?

My computer's hard drive is partitioned, with one partition having all of the Windows system files, and the other having all of my documents, music, videos, etc. When I installed iTunes, it automatically created its music and iPhone folders on the Windows partition. I've been able to change the default save folders for other programs to the second partition, but I'm having troubles finding this option in iTunes (I even went back and re-installed it to see if I could find it that way, but no dice). Is there a way to change the default folders for the iTunes library and iPhone files? It takes up A LOT of space on my Windows partition, so it would be very great to get that moved over.
Thanks!

You can't selectively move individual folders withing the iTunes folder, but you can move the entire folder to, say, an external dive. To delink the iTunes application to the new library location:
Open iTunes while holding down the Option key (Mac) or Shift key (Windows).
In the resulting dialog, click the Choose Library button.
Select the iTunes folder you moved to the external hard drive.
Click Choose (Mac OS X) or Open (Windows) and then choose the iTunes Library file inside .

How do you globally change the default program for opening photo files?

I want to adjust my system so that when I double click a photo file, Preview does not automatically launch. I work in Photoshop all the time and would prefer that it be the default program for pictures. I have already changed the "when you insert a picture CD" command in CD's & DVD's in System preferences but this does not have any effect on when I double click on a picture file to open it; Preview always launches and opens the picture there. That automatic opening behavior is fine but I need it to happen in Photoshop.

Assuming your pictures are all .jpg files: select any .jpg by clicking once on it in the Finder, then press Command+I to Get Info about it. In the Open With: section of the Get Info window, change the preferred application from Preview to Photoshop, then click the Change All button.
Now any .jpg file that you double-click will open in Photoshop.

How do I change the default app for opening a file;

If I right click on a file in finder, it tells me what the default app for opening the file is. it also gives me a short list of other apps.
I would like to change the defaults for several file types, and also delete one app from the short list and add a different one.
How do I do this?
thanks

You could try this:
- right-click (tap with 2 fingers on the apple trackpad) on a file you want to open in openoffice
- move the cursor over "open with". You should see the default app, then some suggestions, then app store, then at the end, "other...". Select "other..."
- find openoffice in your applications folder and select it (if it is dimmed, change "enable: " from "recommended applications" to "all applications", then you can select "openoffice")
- check "always open with"
- then, click "open". The file will open in openoffice and from now on, openoffice will be the default application to open the type of file you just opened. You should also see the icon of all files of the same type change to the openoffice file icon.
This is supposed to work, but that's not always the case, especially when the default app happens to be an Apple app. If you don't want to use that Apple app, delete it (or move it elsewhere if you want a backup). That can help.
Good luck!

Default entry for Folder property - Changed behavior in SP14???

Similar Messages

Maybe you are looking for