Default Excel in place for cl_gui_alv_grid, no headers

I am calling method set_table_for_first_display in cl_gui_alv_grid.
In the layout structure I have no_headers = 'X'.
In the Grid view, there is no default header - it is hidden.
When switching to Excel in place, the headers appear at the top shaded in gray.
I have a need for two heading rows so I need the default hidden. Is there a way to keep the default heading from converting to the gray shadded row at the top of the Excel view?

Hi,
On ouput of ALV Grid -> Right click->Spreadsheet->Excel(In MHTML Format)and press enter
a pop will come for saving there replace the file name export.MHTML to export.xls.
I hope you need this format right?

Similar Messages

ALV Excel in-place for ITS transactions

Dear gurus,
i wonder if:
1) ALV Excel inplace can be used within portal/ transactions provided through ITS
2) if yes, what configuration steps I must maintain (if there is any document about it, could anybody point me to it?)
3) if not, can anybody suggest any alternative? I need to have my Excels formatted (like standard ALV in-place Excel, like using OLE or when I generate a XML Office file, but that would take me too long to create all the outputs one by one) and if possible opened from the portal. If that could not be done, my users would accept to save it first and open the file then.
4) I need this functionality because on my portal the users access quite many standard ERP transactions. If I could do any programming, I would use Office UI WebDynpro container, but obviously I cannot do that. That is the reason I look for some SAP standard way how to do this.
Thank you for your time and effort if you ave read this far:))
Have a nice day everybody, regards Otto

Looks like there is not real progress regarding this topic. Excel in-place is not supported in any GUI version except the SAP GUI for windows. For anybody who would struggle and waste time like me, please read here: Excel inplace not supported in ITS/Web GUI.
Note 512068 - Office integration and SAP GUI for HTML
Note 822867 - Desktop Office Integration: No support for ITS & Java GUI
Regards Otto

Excel in Place not showing

Hi,
I have a problem with excel in place for CL_GUI_ALV_GRID. There are times that I got an error &VEXCEL something...
Thanks!

An excel problem,,, never encountered the problem again

'Edit in Place' for XLSM-files (Excel Macro-Enabled)

Hi,
is it possible to activate 'Edit in Place' for xlsm-files (Excel Macro-Enabled Workbook file)?
For xls(x)-files there is the link 'Edit This File', but not for files of type 'xlsm' allthough they could be dealt the same way with Excel.
I know I can edit this files using the 'Add-in for MS Office' and via the 'Vibe Desktop', but it would be nice to deal them like other Excel-files.
thx
Martin

Originally Posted by mschuhmann
RTFM helps I admit:
Novell Vibe 3.3 Administration Guide > Site Setup > Setting Up Site-Wide Customizations > Configuring File Associations for Edit in Place Applications
Novell Doc: Novell Vibe 3.3 Administration Guide - Configuring File Associations for Edit in Place Applications
Append ".xlsm" for the variable edit.in.place.file.applet.extensions, edit.in.place.file.webdav.extensions
Hi Martin,
Yeah, the Vibe docs can help on occasion
Still, thanks for feeding it back to the forums as it can be quicker finding a hit in the forums than having to go through the docs!
Cheers,
Willem

Excel Cluster Connector for Microsoft HPC Pack 2012 R2 load error

Hi,
I tried to load the 'Excel Cluster Connector for Microsoft HPC Pack 2012 R2' but get an error 'A runtime error occured during the loading of the COM Add-in'.
My environment:
Windows 2012 R12 Std edition
HPC Pack 2012 R2
Excel 2010 - 64 bits
I have generated a Fusion file (see below). Has someone an idea what went wrong? I already tried to copy 'Microsoft.Hpc.Excel.XllConnector.DLL' to 'C:/Program Files/Microsoft Office/Office14' but that did not help.
Thanks.
Theo.
*** Assembly Binder Log Entry (1/19/2014 @ 10:16:20 PM) ***
The operation failed.
Bind result: hr = 0x80070002. The system cannot find the file specified.
Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
Running under executable C:\Program Files\Microsoft Office\Office14\EXCEL.EXE
--- A detailed error log follows.
=== Pre-bind state information ===
LOG: DisplayName = Microsoft.Hpc.Excel.XllConnector, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
(Fully-specified)
LOG: Appbase = file:///C:/Program Files/Microsoft Office/Office14/
LOG: Initial PrivatePath = NULL
LOG: Dynamic Base = NULL
LOG: Cache Base = NULL
LOG: AppName = EXCEL.EXE
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Download of application configuration file was attempted from file:///C:/Program Files/Microsoft Office/Office14/EXCEL.EXE.config.
LOG: Configuration file C:\Program Files\Microsoft Office\Office14\EXCEL.EXE.config does not exist.
LOG: No application configuration file found.
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\config\machine.config.
LOG: Post-policy reference: Microsoft.Hpc.Excel.XllConnector, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
LOG: GAC Lookup was unsuccessful.
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft Office/Office14/Microsoft.Hpc.Excel.XllConnector.DLL.
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft Office/Office14/Microsoft.Hpc.Excel.XllConnector/Microsoft.Hpc.Excel.XllConnector.DLL.
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft Office/Office14/Microsoft.Hpc.Excel.XllConnector.EXE.
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft Office/Office14/Microsoft.Hpc.Excel.XllConnector/Microsoft.Hpc.Excel.XllConnector.EXE.
LOG: All probing URLs attempted and failed.
*** Assembly Binder Log Entry (1/19/2014 @ 10:16:20 PM) ***
The operation failed.
Bind result: hr = 0x80070002. The system cannot find the file specified.
Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
Running under executable C:\Program Files\Microsoft Office\Office14\EXCEL.EXE
--- A detailed error log follows.
=== Pre-bind state information ===
LOG: DisplayName = Microsoft.Hpc.Excel.XllConnector, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
(Fully-specified)
LOG: Appbase = file:///C:/Program Files/Microsoft Office/Office14/
LOG: Initial PrivatePath = NULL
LOG: Dynamic Base = NULL
LOG: Cache Base = NULL
LOG: AppName = EXCEL.EXE
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Download of application configuration file was attempted from file:///C:/Program Files/Microsoft Office/Office14/EXCEL.EXE.config.
LOG: Configuration file C:\Program Files\Microsoft Office\Office14\EXCEL.EXE.config does not exist.
LOG: No application configuration file found.
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\config\machine.config.
LOG: Post-policy reference: Microsoft.Hpc.Excel.XllConnector, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
LOG: GAC Lookup was unsuccessful.
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft Office/Office14/Microsoft.Hpc.Excel.XllConnector.DLL.
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft Office/Office14/Microsoft.Hpc.Excel.XllConnector/Microsoft.Hpc.Excel.XllConnector.DLL.
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft Office/Office14/Microsoft.Hpc.Excel.XllConnector.EXE.
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft Office/Office14/Microsoft.Hpc.Excel.XllConnector/Microsoft.Hpc.Excel.XllConnector.EXE.
LOG: All probing URLs attempted and failed.
*** Assembly Binder Log Entry (1/19/2014 @ 10:26:05 PM) ***
The operation was successful.
Bind result: hr = 0x0. The operation completed successfully.
Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
Running under executable C:\Program Files\Microsoft Office\Office14\EXCEL.EXE
--- A detailed error log follows.
=== Pre-bind state information ===
LOG: DisplayName = Microsoft.Hpc.Excel.XllConnector, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
(Fully-specified)
LOG: Appbase = file:///C:/Program Files/Microsoft Office/Office14/
LOG: Initial PrivatePath = NULL
LOG: Dynamic Base = NULL
LOG: Cache Base = NULL
LOG: AppName = EXCEL.EXE
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Download of application configuration file was attempted from file:///C:/Program Files/Microsoft Office/Office14/EXCEL.EXE.config.
LOG: Configuration file C:\Program Files\Microsoft Office\Office14\EXCEL.EXE.config does not exist.
LOG: No application configuration file found.
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\config\machine.config.
LOG: Post-policy reference: Microsoft.Hpc.Excel.XllConnector, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
LOG: GAC Lookup was unsuccessful.
LOG: Attempting download of new URL file:///C:/Program Files/Microsoft Office/Office14/Microsoft.Hpc.Excel.XllConnector.DLL.
LOG: Assembly download was successful. Attempting setup of file: C:\Program Files\Microsoft Office\Office14\Microsoft.Hpc.Excel.XllConnector.dll
LOG: Entering run-from-source setup phase.
LOG: Assembly Name is: Microsoft.Hpc.Excel.XllConnector, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
LOG: Binding succeeds. Returns assembly from C:\Program Files\Microsoft Office\Office14\Microsoft.Hpc.Excel.XllConnector.dll.
LOG: Assembly is loaded in default load context.

Hi,
The
Windows HPC (High Performance Computing) forum will be a better forums for you to ask this question. You can post your thread for HPC forum.
Thank you very much for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Excel in place runtime error

We have a custom report which displays the output in ALV Grid ( OO ABAP , using custom container ) and when we try to use the excel in place option we get a short dump . We have more than 60 thousand records. We are using microsoft excel 2007.
Exception condition "SYSTEM_FAILURE" raised.
A RAISE statement in the program "SAPLOLEA" raised the exception
condition "SYSTEM_FAILURE".
Since the exception was not intercepted by a superior
program, processing was terminated.
Thx
Krishna.

Create a custom toolbar button and use any of the standard FM's/methods to download to excel. The reason i am saying it, at times, it's been observed that for large data/records, the standard download to excel functionality dumps. Not sure if this is an actual issue, but this happened with me few times and always gave a custom download functionality.
See, if it works.
Thanks,
Santosh

ALV Excel in-place in Portal

Dear gurus,
i wonder if:
1) ALV Excel inplace can be used within portal
2) if yes, what configuration steps I must maintain (if there is any document about it, could anybody point me to it?)
3) if not, can anybody suggest any alternative? I need to have my Excels formatted (like using OLE or when I generate a XML Office file, but that would take me too long to create all the outputs one by one) and if possible opened from the portal. If that could not be done, my users would accept to save it first and open the file then.
4) I need this functionality because on my portal the users access the standard ERP transactions (through ITS or WebGUI or how exactly that is called). If I could do any programming, I would use Office UI WebDynpro container, but obviously I cannot do that. That is the reason I look for some SAP standard way how to do this.
Thank you for your time and effort if you ave read this far:))¨
Have a nice day everybody, regards Otto

Looks like there is not real progress regarding this topic. Excel in-place is not supported in any GUI version except the SAP GUI for windows. For anybody who would struggle and waste time like me, please read here:
Note 512068 - Office integration and SAP GUI for HTML
Note 822867 - Desktop Office Integration: No support for ITS & Java GUI
Regards Otto

Excel in place from AlV GRID

Hello,
i am displaying an ALV Grid by using "REUSE_ALV_GRID_DISPLAY". When I switch to Excel inplace display for the result list only 202 rows are displayed in excel. (in alv list there are 1376). When i switch back to alv list all are shown again. Has anyone an idea about ? I guess there is a parameter who limits it for excel.
Kind Regards
Joachim Bertram

Hi,
There is a Macro Security setting "Trust Access to Visual Basic Project" which needs to be turned on within Excel in order to get any rows in the Excel inplace from your ALV, but since you are getting a subset of rows I doubt this is your issue.
Judging from the number of SAP Notes updated in the year 2008, it would seem to me that the Excel integration is still very much an ongoing work-in-progress. Unfortunately, I couldn't find any other Notes that specifically talk about missing only some rows (other than the ones that cover the ALL rows missing problem).
You may want to check with your Basis team to determine if there is some sort of setting that is limiting the number of rows being transferred. From what you describe, though, I'd be very surprised if a setting like this (if it even exists) would be set to such a small number of Excel rows. You might also want to check with them to find out if there is a max number of bytes allowed for Excel inplace transfers. If so, and if you have a lot of columns, then this might be a factor.
Which versions of Office/Excel and SAPGUI are you using? This is important because, as [Note 722513|https://service.sap.com/sap/support/notes/722513] explains in detail, only certain combinations of MS Office, SAPGUI and SAP Basis are supported. If you can exclude the support issue as a factor then there is a chance that the issue you described in you original message may actually be a new problem that has not been addressed by SAP yet. After all, how and why do you suppose all of the dozens of existing Notes regarding ALV and Office integration got created in the first place? Some customer had to discover the problem and report it to SAP.
One final suggestion I can make is that you should have someone confirm that Note 756623 has been applied correctly in your system. Even though the support pack SAPKB62061 should have this Note, it never hurts to check the Note implementation line-by-line just in case (especially in a case like this in which the note seems to match your symptoms so closely).
Best Regards,
Jamie

How to read an APO table from excel in place using Visual Basic ?

We have enhanced some APO reports using layouts that use excel in place with custom visual basic (VB) code. For example, the VB code can append the data with additional columns that perform specific calculations and then proceed to create pivot table reports in excel..That is working fine.
The challenge is to see if that VB code could read specific APO tables (e.g. product master tables) to bring additional elements into excel and thus expand the report content. We know that additional fields can be added to the reports, but having the flexibility to read tables from VB could be more flexible.
Can that be done?. If so, would it be possible using exclusively the VB code attached to the layout, i.e. no ABAP?

Hello Anselmo,
I am assuming you are doing this either using BeX analyzer or by reading the planning book using the RFC ActiveX component and a BAPI.
I think it's possible to retrieve the data from the product master table. Here are my thoughts on how can this be done:
1) You can create a generic datasource (transaction RSO2) for the product master table, connect that to a BW remotecube and use a BeX query to retrieve that values. You can then join the queries using VBA. Alternatively, you can build a muti-provider that connects your current InfoCube to the new RemoteCube and build a query from there. The multi-provider, in this case, joins the data (no more VBA).
2) If you have already loaded your product master data into master data carrying InfoObjects then you can try the same technique as #1 but this time there is no need to create the generic datasource. You can use the InfoObjects for your master data as the InfoProviders for your query.
3) You can try the ActiveX component from SAP which can connect to any emote enabled function in SAP system. SAP already provided some BAPIs (check transaction BAPI for a list) which might be able to provide the data. You can also create your own function modules (be sure to make it remote enabled) using ABAP. (transaction SE37).
Hope this helps

Is it possible to change the formatting of Excel in place

Hi,
is it possible to change the standard formatting of columns and texts when using Excel inplace (Excel on the web for the BPS )?
Many thanks,
Simon Cohen

Simon,
I am afraid you can't modify styles using excel in place.
Note 632333 says the following :
List of the features the Excel OWC can use from the template:
Text format - font, size, colour
Cell format - background colour, border, alignment
Number format
"Simple" formulas
Panes Split and Freeze (only for Office versions 2002(XP) or higher)
Nevertheless this applies only for cells which are not filled by BPS runtime. All texts and values written by BPS runtime into the template use standard styles. The styles cannot be changed, see below.
List of features that are not available in the Excel OWC:
Styles. Consequently no changes to the SAP standard styles are taken over to the OWC. Therefore the features mentioned above are available only for the cells not containing a transaction specific data
VB Macros. When needed, the designer can use a script language (VBScript, JavaScript) to access the DOM of the OWC. You can include HTML into a text component in the Web Interface customizing (tn BPS_WB) and place your script code there.
Cell and text formats not mentioned above (e.g. text orientation,...)
Line brakes within a cell
Panes Split and Freeze (only for Office version 2000)
Embeded elements (like form objects, pictures, background picture,...)
Having more than one worksheet in the Excel OWC
In comparison to HTML based planning layouts the Excel layouts do not identify the position of the documents.
Hope it helps,
Alberto

Excel - microsoft office for Mac 2008

Can someone tell me how to delete empty text boxes from an excel spreadsheet (microsoft office for mac 2008). I must be overlooking something. Thank you for your reply.

Hmmmm...I'm guessing somebody else has run into this...is there a better place for me to post my question in the forum? Or does everybody in the forum see the question regardless of the catagory it is posted under? I wasn't sure which catagory it should go under.

The iPad says disabled connect to iTunes. When connected it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Best place for CUA

We've got ECC, BW, XI, EP, SolutionManager installed and want to implement CUA.
I want to know your comment on:
One CUA or more CUAs, we have 3 systems (DEV, QAS, PRD) landscape for each system.
*Where is the best place for CUA?
TIA.

Hi Team FI,
There are other factors that may be considered when deciding where to put CUA. For example:
Are you using Indirect Assignment of roles also? If so, then simplicity would say, put the CUA on the same system as the HR module (saves having to ALE over the PD object -> Role relationships to different CUA system).
High availability - normally your ECC system would have the highest availability due to the critical nature and impact on business, so it would make sense to put it on your ECC system if this is the leading factor.
What is your role integration strategy like? I know some clients that have excellent integration across all systems such that a 'role' is defined as all of the access that you require inclusive of all SAP systems, and LDAPs. If this is the case, then you can have a single CUA system. Assign ONE composite role to the user, which then provisions out single roles to all of the other SAP systems (including non-prod) and synchronises with your LDAP. If your role integration is not as 'good' as this, then you may consider having two CUA systems. One for the prod systems, and the other for the non-prod systems.

Best place for LR catalog (.lrcat) file?

I'm putting together a new PC running Vista and am trying to figure out the best place for the LR catalog (lrcat) file. This PC has multiple hard drives as follows:
C: OS and apps
D: non-photo files (docs, mp3s, etc)
E: photo files
F: video files
All the drives are comparable in read/write speed. The Lightroom app will be installed on the C: drive, and the LR catalog will consist of the images on the E: drive. While working in LR, I sometimes listen to mp3s stored on the D: drive. I'm assuming that the best place for the lrcat file is the F: drive (since I seldom access that drive while working in LR). Does this make sense? Or should the lrcat file go somewhere else?
On a side note, on my last PC, I had the lrcat file in what was originally a dedicated scratch drive (for PS), but I'm doing less and less in Photoshop these days, and my new system will have 12GB of ram, so I decided to do without a dedicated scratch drive for the new system.
Any advise appreciated.

Asking yourself the following questions may help determine which drive is best suited for storing the Lightroom Catalog:
1) Are you the only person using the "Lightroom computer"?
2) Do you have multiple log on accounts?
3) Do multiple log on accounts need access to the Lightroom Catalog?
If you answer yes to #1, its default location might be fine. If you answer yes to #2 or #3, you should concider a central location for the .lrcat file.
By default, the .lrcat file is located in a users document folder. This means that at least one (1) .lrcat file will be created per user account. Seeing that you usually keep photo files on the E Drive, creating a folder on the root of the E Drive might not be a bad idea. Using the root of E schema will then allow mutiple users to access the .lrcat file when they log on. Using the E Drive keeps "photo related" files together, thought Drive D or Drive F would also work. It appears from your description that you keep O/S and Applications only on the C Drive, which I do myself.
Hope that helps!

BEx Analyzer Report error - microsoft office excel is waiting for another

Hi,
I am running a query from BEx Analyzer, it is throwing the error as " microsoft office excel is waiting for another application to complete an ole action "
Here in variable screen, I am trying to give input for the variables, then it is throwing the above error message.

The error message you are receiving means that an Excel macro is waiting for another macro to finish in order to proceed. It is an informational message so you understand why the system is slower than expected.
The solution is on the Microsoft side, see BOJ Note 1201513.
From the MSDN link below, you will see a description of the Display
Alerts Property:
http://msdn.microsoft.com/en-us/library/aa194195(office.10).aspx
DisplayAlerts Property
wdAlertsNone No alerts or message boxes are displayed. If a macro encounters a message box, the default value is chosen and the macro continues.
The Note suggests changing the "Application.DisplayAlerts = False" to "Application.DisplayAlerts = wdAlertsNone"

Default Excel in place for cl_gui_alv_grid, no headers

Similar Messages

Maybe you are looking for